static int mei_txe_pci_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
int err;
dev = pci_get_drvdata(pdev);
if (!dev)
return -ENODEV;
pci_enable_msi(pdev);
mei_clear_interrupts(dev);
/* request and enable interrupt */
if (pci_dev_msi_enabled(pdev))
err = request_threaded_irq(pdev->irq,
NULL,
mei_txe_irq_thread_handler,
IRQF_ONESHOT, KBUILD_MODNAME, dev);
else
err = request_threaded_irq(pdev->irq,
mei_txe_irq_quick_handler,
mei_txe_irq_thread_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
pdev->irq);
return err;
}
err = mei_restart(dev);
return err;
}
/**
* mei_restart - restart device after suspend
*
* @dev: the device structure
*
* returns 0 on success or -ENODEV if the restart hasn't succeeded
*/
int mei_restart(struct mei_device *dev)
{
int err;
mutex_lock(&dev->device_lock);
mei_clear_interrupts(dev);
dev->dev_state = MEI_DEV_POWER_UP;
dev->reset_count = 0;
err = mei_reset(dev);
mutex_unlock(&dev->device_lock);
if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "device disabled = %d\n", err);
return -ENODEV;
}
/* try to start again */
if (err)
schedule_work(&dev->reset_work);
return 0;
}
/**
* mei_start - initializes host and fw to start work.
*
* @dev: the device structure
*
* returns 0 on success, <0 on failure.
*/
int mei_start(struct mei_device *dev)
{
int ret;
mutex_lock(&dev->device_lock);
/* acknowledge interrupt and stop interrupts */
mei_clear_interrupts(dev);
mei_hw_config(dev);
dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");
dev->reset_count = 0;
do {
dev->dev_state = MEI_DEV_INITIALIZING;
ret = mei_reset(dev);
if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "reset failed ret = %d", ret);
goto err;
}
} while (ret);
/* we cannot start the device w/o hbm start message completed */
if (dev->dev_state == MEI_DEV_DISABLED) {
dev_err(&dev->pdev->dev, "reset failed");
goto err;
}
if (mei_hbm_start_wait(dev)) {
dev_err(&dev->pdev->dev, "HBM haven't started");
goto err;
}
if (!mei_host_is_ready(dev)) {
dev_err(&dev->pdev->dev, "host is not ready.\n");
goto err;
}
if (!mei_hw_is_ready(dev)) {
dev_err(&dev->pdev->dev, "ME is not ready.\n");
goto err;
}
if (!mei_hbm_version_is_supported(dev)) {
dev_dbg(&dev->pdev->dev, "MEI start failed.\n");
goto err;
}
dev_dbg(&dev->pdev->dev, "link layer has been established.\n");
mutex_unlock(&dev->device_lock);
return 0;
err:
dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
dev->dev_state = MEI_DEV_DISABLED;
mutex_unlock(&dev->device_lock);
return -ENODEV;
}
/**
* mei_start - initializes host and fw to start work.
*
* @dev: the device structure
*
* returns 0 on success, <0 on failure.
*/
int mei_start(struct mei_device *dev)
{
mutex_lock(&dev->device_lock);
/* acknowledge interrupt and stop interupts */
mei_clear_interrupts(dev);
mei_hw_config(dev);
dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");
mei_reset(dev, 1);
if (mei_hbm_start_wait(dev)) {
dev_err(&dev->pdev->dev, "HBM haven't started");
goto err;
}
if (!mei_host_is_ready(dev)) {
dev_err(&dev->pdev->dev, "host is not ready.\n");
goto err;
}
if (!mei_hw_is_ready(dev)) {
dev_err(&dev->pdev->dev, "ME is not ready.\n");
goto err;
}
if (dev->version.major_version != HBM_MAJOR_VERSION ||
dev->version.minor_version != HBM_MINOR_VERSION) {
dev_dbg(&dev->pdev->dev, "MEI start failed.\n");
goto err;
}
dev_dbg(&dev->pdev->dev, "link layer has been established.\n");
mutex_unlock(&dev->device_lock);
return 0;
err:
dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
dev->dev_state = MEI_DEV_DISABLED;
mutex_unlock(&dev->device_lock);
return -ENODEV;
}
/**
* mei_restart - restart device after suspend
*
* @dev: the device structure
*
* returns 0 on success or -ENODEV if the restart hasn't succeeded
*/
int mei_restart(struct mei_device *dev)
{
int err;
mutex_lock(&dev->device_lock);
mei_clear_interrupts(dev);
dev->dev_state = MEI_DEV_POWER_UP;
dev->reset_count = 0;
err = mei_reset(dev);
mutex_unlock(&dev->device_lock);
if (err || dev->dev_state == MEI_DEV_DISABLED)
return -ENODEV;
return 0;
}
static int mei_me_pci_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct mei_device *dev;
int err;
dev = pci_get_drvdata(pdev);
if (!dev)
return -ENODEV;
pci_enable_msi(pdev);
/* request and enable interrupt */
if (pci_dev_msi_enabled(pdev))
err = request_threaded_irq(pdev->irq,
NULL,
mei_me_irq_thread_handler,
IRQF_ONESHOT, KBUILD_MODNAME, dev);
else
err = request_threaded_irq(pdev->irq,
mei_me_irq_quick_handler,
mei_me_irq_thread_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n",
pdev->irq);
return err;
}
mutex_lock(&dev->device_lock);
dev->dev_state = MEI_DEV_POWER_UP;
mei_clear_interrupts(dev);
mei_reset(dev, 1);
mutex_unlock(&dev->device_lock);
/* Start timer if stopped in suspend */
schedule_delayed_work(&dev->timer_work, HZ);
return err;
}
void mei_stop(struct mei_device *dev)
{
dev_dbg(dev->dev, "stopping the device.\n");
mutex_lock(&dev->device_lock);
dev->dev_state = MEI_DEV_POWER_DOWN;
mutex_unlock(&dev->device_lock);
mei_cl_bus_remove_devices(dev);
mei_cancel_work(dev);
mei_clear_interrupts(dev);
mei_synchronize_irq(dev);
mutex_lock(&dev->device_lock);
mei_reset(dev);
/* move device to disabled state unconditionally */
dev->dev_state = MEI_DEV_DISABLED;
mutex_unlock(&dev->device_lock);
}
static void mei_reset_work(struct work_struct *work)
{
struct mei_device *dev =
container_of(work, struct mei_device, reset_work);
int ret;
mei_clear_interrupts(dev);
mei_synchronize_irq(dev);
mutex_lock(&dev->device_lock);
ret = mei_reset(dev);
mutex_unlock(&dev->device_lock);
if (dev->dev_state == MEI_DEV_DISABLED) {
dev_err(dev->dev, "device disabled = %d\n", ret);
return;
}
/* retry reset in case of failure */
if (ret)
schedule_work(&dev->reset_work);
}
/**
* mei_txe_probe - Device Initialization Routine
*
* @pdev: PCI device structure
* @ent: entry in mei_txe_pci_tbl
*
* Return: 0 on success, <0 on failure.
*/
static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct mei_device *dev;
struct mei_txe_hw *hw;
int err;
int i;
/* enable pci dev */
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "failed to enable pci device.\n");
goto end;
}
/* set PCI host mastering */
pci_set_master(pdev);
/* pci request regions for mei driver */
err = pci_request_regions(pdev, KBUILD_MODNAME);
if (err) {
dev_err(&pdev->dev, "failed to get pci regions.\n");
goto disable_device;
}
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
if (err) {
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
dev_err(&pdev->dev, "No suitable DMA available.\n");
goto release_regions;
}
}
/* allocates and initializes the mei dev structure */
dev = mei_txe_dev_init(pdev);
if (!dev) {
err = -ENOMEM;
goto release_regions;
}
hw = to_txe_hw(dev);
/* mapping IO device memory */
for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) {
hw->mem_addr[i] = pci_iomap(pdev, i, 0);
if (!hw->mem_addr[i]) {
dev_err(&pdev->dev, "mapping I/O device memory failure.\n");
err = -ENOMEM;
goto free_device;
}
}
pci_enable_msi(pdev);
/* clear spurious interrupts */
mei_clear_interrupts(dev);
/* request and enable interrupt */
if (pci_dev_msi_enabled(pdev))
err = request_threaded_irq(pdev->irq,
NULL,
mei_txe_irq_thread_handler,
IRQF_ONESHOT, KBUILD_MODNAME, dev);
else
err = request_threaded_irq(pdev->irq,
mei_txe_irq_quick_handler,
mei_txe_irq_thread_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n",
pdev->irq);
goto free_device;
}
if (mei_start(dev)) {
dev_err(&pdev->dev, "init hw failure.\n");
err = -ENODEV;
goto release_irq;
}
pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT);
pm_runtime_use_autosuspend(&pdev->dev);
err = mei_register(dev, &pdev->dev);
if (err)
goto stop;
pci_set_drvdata(pdev, dev);
/*
* For not wake-able HW runtime pm framework
* can't be used on pci device level.
* Use domain runtime pm callbacks instead.
*/
if (!pci_dev_run_wake(pdev))
mei_txe_set_pm_domain(dev);
pm_runtime_put_noidle(&pdev->dev);
return 0;
stop:
mei_stop(dev);
release_irq:
mei_cancel_work(dev);
/* disable interrupts */
mei_disable_interrupts(dev);
free_irq(pdev->irq, dev);
pci_disable_msi(pdev);
free_device:
mei_txe_pci_iounmap(pdev, hw);
kfree(dev);
release_regions:
pci_release_regions(pdev);
disable_device:
pci_disable_device(pdev);
end:
dev_err(&pdev->dev, "initialization failed.\n");
return err;
}
/**
* mei_hw_init - initializes host and fw to start work.
*
* @dev: the device structure
*
* returns 0 on success, <0 on failure.
*/
int mei_hw_init(struct mei_device *dev)
{
int ret = 0;
mutex_lock(&dev->device_lock);
/* acknowledge interrupt and stop interupts */
mei_clear_interrupts(dev);
mei_hw_config(dev);
dev->recvd_msg = false;
dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n");
mei_reset(dev, 1);
/* wait for ME to turn on ME_RDY */
if (!dev->recvd_msg) {
mutex_unlock(&dev->device_lock);
ret = wait_event_interruptible_timeout(dev->wait_recvd_msg,
dev->recvd_msg,
mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT));
mutex_lock(&dev->device_lock);
}
if (ret <= 0 && !dev->recvd_msg) {
dev->dev_state = MEI_DEV_DISABLED;
dev_dbg(&dev->pdev->dev,
"wait_event_interruptible_timeout failed"
"on wait for ME to turn on ME_RDY.\n");
goto err;
}
if (!mei_host_is_ready(dev)) {
dev_err(&dev->pdev->dev, "host is not ready.\n");
goto err;
}
if (!mei_hw_is_ready(dev)) {
dev_err(&dev->pdev->dev, "ME is not ready.\n");
goto err;
}
if (dev->version.major_version != HBM_MAJOR_VERSION ||
dev->version.minor_version != HBM_MINOR_VERSION) {
dev_dbg(&dev->pdev->dev, "MEI start failed.\n");
goto err;
}
dev->recvd_msg = false;
dev_dbg(&dev->pdev->dev, "link layer has been established.\n");
mutex_unlock(&dev->device_lock);
return 0;
err:
dev_err(&dev->pdev->dev, "link layer initialization failed.\n");
dev->dev_state = MEI_DEV_DISABLED;
mutex_unlock(&dev->device_lock);
return -ENODEV;
}
/**
* mei_reset - resets host and fw.
*
* @dev: the device structure
*
* Return: 0 on success or < 0 if the reset hasn't succeeded
*/
int mei_reset(struct mei_device *dev)
{
enum mei_dev_state state = dev->dev_state;
bool interrupts_enabled;
int ret;
if (state != MEI_DEV_INITIALIZING &&
state != MEI_DEV_DISABLED &&
state != MEI_DEV_POWER_DOWN &&
state != MEI_DEV_POWER_UP) {
char fw_sts_str[MEI_FW_STATUS_STR_SZ];
mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ);
dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n",
mei_dev_state_str(state), fw_sts_str);
}
mei_clear_interrupts(dev);
/* we're already in reset, cancel the init timer
* if the reset was called due the hbm protocol error
* we need to call it before hw start
* so the hbm watchdog won't kick in
*/
mei_hbm_idle(dev);
/* enter reset flow */
interrupts_enabled = state != MEI_DEV_POWER_DOWN;
dev->dev_state = MEI_DEV_RESETTING;
dev->reset_count++;
if (dev->reset_count > MEI_MAX_CONSEC_RESET) {
dev_err(dev->dev, "reset: reached maximal consecutive resets: disabling the device\n");
dev->dev_state = MEI_DEV_DISABLED;
return -ENODEV;
}
ret = mei_hw_reset(dev, interrupts_enabled);
/* fall through and remove the sw state even if hw reset has failed */
/* no need to clean up software state in case of power up */
if (state != MEI_DEV_INITIALIZING && state != MEI_DEV_POWER_UP)
mei_cl_all_disconnect(dev);
mei_hbm_reset(dev);
memset(dev->rd_msg_hdr, 0, sizeof(dev->rd_msg_hdr));
if (ret) {
dev_err(dev->dev, "hw_reset failed ret = %d\n", ret);
return ret;
}
if (state == MEI_DEV_POWER_DOWN) {
dev_dbg(dev->dev, "powering down: end of reset\n");
dev->dev_state = MEI_DEV_DISABLED;
return 0;
}
ret = mei_hw_start(dev);
if (ret) {
dev_err(dev->dev, "hw_start failed ret = %d\n", ret);
return ret;
}
dev_dbg(dev->dev, "link is established start sending messages.\n");
dev->dev_state = MEI_DEV_INIT_CLIENTS;
ret = mei_hbm_start_req(dev);
if (ret) {
dev_err(dev->dev, "hbm_start failed ret = %d\n", ret);
dev->dev_state = MEI_DEV_RESETTING;
return ret;
}
return 0;
}
