void target_init(void)
{
unsigned base_addr;
unsigned char slot;
dprintf(INFO, "target_init()\n");
/* Keypad init */
keys_init();
keypad_init();
/* Trying Slot 1 first */
slot = 1;
base_addr = mmc_sdc_base[slot-1];
if(mmc_boot_main(slot, base_addr))
{
/* Trying Slot 3 next */
slot = 3;
base_addr = mmc_sdc_base[slot-1];
if(mmc_boot_main(slot, base_addr))
{
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void target_init(void)
{
uint32_t base_addr;
uint8_t slot;
dprintf(INFO, "target_init()\n");
/* Initialize PMIC driver */
pmic.read = pa1_ssbi2_read_bytes;
pmic.write = pa1_ssbi2_write_bytes;
pm8921_init(&pmic);
/* Keypad init */
keys_init();
keypad_init();
/* fbcon */
display_init();
/* Trying Slot 1 first */
slot = 1;
base_addr = mmc_sdc_base[slot-1];
if(mmc_boot_main(slot, base_addr))
{
/* Trying Slot 3 next */
slot = 3;
base_addr = mmc_sdc_base[slot-1];
if(mmc_boot_main(slot, base_addr))
{
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void target_init(void)
{
uint32_t base_addr;
uint8_t slot;
dprintf(INFO, "target_init()\n");
spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);
/* Trying Slot 1*/
slot = 1;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr))
{
/* Trying Slot 2 next */
slot = 2;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr))
{
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void target_init(void)
{
uint32_t base_addr;
uint8_t slot;
dprintf(INFO, "target_init()\n");
spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);
target_keystatus();
if (target_use_signed_kernel())
target_crypto_init_params();
/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
dprintf(INFO, "Display Init: Start\n");
display_init();
dprintf(INFO, "Display Init: Done\n");
#endif
/* Trying Slot 1*/
slot = 1;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr))
{
/* Trying Slot 2 next */
slot = 2;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void target_init(void)
{
unsigned base_addr;
unsigned char slot;
unsigned platform_id = board_platform_id();
dprintf(INFO, "target_init()\n");
/* Initialize PMIC driver */
pmic.read = (pm8921_read_func) & pa1_ssbi2_read_bytes;
pmic.write = (pm8921_write_func) & pa1_ssbi2_write_bytes;
pm8921_init(&pmic);
/* Keypad init */
keys_init();
if(platform_id == MSM8960)
{
msm8960_keypad_init();
}
else if(platform_id == MSM8930)
{
msm8930_keypad_init();
}
else if( (platform_id == APQ8064) ||
(platform_id == MPQ8064))
{
apq8064_keypad_init();
}
/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
display_init();
dprintf(SPEW, "Diplay initialized\n");
#endif
if ((platform_id == MSM8960) || (platform_id == MSM8660A)
|| (platform_id == MSM8260A) || (platform_id == APQ8060A))
/* Enable Hardware CE */
platform_ce_type = CRYPTO_ENGINE_TYPE_HW;
/* Trying Slot 1 first */
slot = 1;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
/* Trying Slot 3 next */
slot = 3;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void target_init(void)
{
target_shutdown_for_rtc_alarm();
dprintf(INFO, "target_init()\n");
setup_fpga();
/* Setting Debug LEDs ON */
debug_led_write(0xFF);
#if (!ENABLE_NANDWRITE)
keys_init();
keypad_init();
#endif
/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
display_init();
dprintf(SPEW, "Diplay initialized\n");
display_image_on_screen();
#endif
if (mmc_boot_main(MMC_SLOT, MSM_SDC1_BASE)) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
static void target_mmc_mci_init()
{
uint32_t base_addr;
uint8_t slot;
/* Trying Slot 1 */
slot = 1;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr))
{
/* Trying Slot 2 next */
slot = 2;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void target_init(void)
{
dprintf(INFO, "target_init()\n");
setup_fpga();
/* Setting Debug LEDs ON */
debug_led_write(0xFF);
#if (!ENABLE_NANDWRITE)
keys_init();
keypad_init();
#endif
if(mmc_boot_main(MMC_SLOT,MSM_SDC1_BASE))
{
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
void target_init(void)
{
unsigned offset;
struct flash_info *flash_info;
struct ptentry *board_part_list;
unsigned total_num_of_blocks;
unsigned next_ptr_start_adr = 0;
unsigned blocks_per_1MB = 8; /* Default value of 2k page size on 256MB flash drive*/
int i;
dprintf(INFO, "target_init()\n");
#if (!ENABLE_NANDWRITE)
keys_init();
keypad_init();
#endif
/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
display_init();
dprintf(SPEW, "Diplay initialized\n");
display_image_on_screen();
#endif
if (target_is_emmc_boot())
{
/* Must wait for modem-up before we can intialize MMC.
*/
while (readl(MSM_SHARED_BASE + 0x14) != 1);
if(mmc_boot_main(MMC_SLOT, MSM_SDC3_BASE))
{
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
return;
}
ptable_init(&flash_ptable);
smem_ptable_init();
flash_init();
flash_info = flash_get_info();
ASSERT(flash_info);
offset = smem_get_apps_flash_start();
if (offset == 0xffffffff)
while(1);
total_num_of_blocks = flash_info->num_blocks;
blocks_per_1MB = (1 << 20) / (flash_info->block_size);
if (flash_ecc_bch_enabled())
board_part_list = board_part_list_bchecc;
else
board_part_list = board_part_list_default;
for (i = 0; i < num_parts; i++) {
struct ptentry *ptn = &board_part_list[i];
unsigned len = ((ptn->length) * blocks_per_1MB);
if(ptn->start != 0)
ASSERT(ptn->start == DIFF_START_ADDR);
ptn->start = next_ptr_start_adr;
if(ptn->length == VARIABLE_LENGTH)
{
unsigned length_for_prt = 0;
unsigned j;
for (j = i+1; j < num_parts; j++)
{
struct ptentry *temp_ptn = &board_part_list[j];
ASSERT(temp_ptn->length != VARIABLE_LENGTH);
length_for_prt += ((temp_ptn->length) * blocks_per_1MB);
}
len = (total_num_of_blocks - 1) - (offset + ptn->start + length_for_prt);
ASSERT(len >= 0);
}
next_ptr_start_adr = ptn->start + len;
ptable_add(&flash_ptable, ptn->name, offset + ptn->start,
len, ptn->flags, TYPE_APPS_PARTITION, PERM_WRITEABLE);
}
smem_add_modem_partitions(&flash_ptable);
ptable_dump(&flash_ptable);
flash_set_ptable(&flash_ptable);
}
void target_init(void)
{
unsigned offset;
struct flash_info *flash_info;
unsigned total_num_of_blocks;
unsigned next_ptr_start_adr = 0;
unsigned blocks_per_1MB = 8; /* Default value of 2k page size on 256MB flash drive*/
unsigned base_addr;
unsigned char slot;
int i;
dprintf(INFO, "target_init()\n");
#if (!ENABLE_NANDWRITE)
keys_init();
keypad_init();
#endif
if (target_is_emmc_boot())
{
/* Trying Slot 2 first */
slot = 2;
base_addr = mmc_sdc_base[slot-1];
if(mmc_boot_main(slot, base_addr))
{
/* Trying Slot 4 next */
slot = 4;
base_addr = mmc_sdc_base[slot-1];
if(mmc_boot_main(slot, base_addr))
{
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
return;
}
ptable_init(&flash_ptable);
smem_ptable_init();
flash_init();
flash_info = flash_get_info();
ASSERT(flash_info);
enable_interleave_mode(target_is_interleaved_mode());
offset = smem_get_apps_flash_start();
if (offset == 0xffffffff)
while(1);
total_num_of_blocks = flash_info->num_blocks;
blocks_per_1MB = (1 << 20) / (flash_info->block_size);
for (i = 0; i < num_parts; i++) {
struct ptentry *ptn = &board_part_list[i];
unsigned len = ((ptn->length) * blocks_per_1MB);
if(ptn->start != 0)
ASSERT(ptn->start == DIFF_START_ADDR);
ptn->start = next_ptr_start_adr;
if(ptn->length == VARIABLE_LENGTH)
{
unsigned length_for_prt = 0;
unsigned j;
for (j = i+1; j < num_parts; j++)
{
struct ptentry *temp_ptn = &board_part_list[j];
ASSERT(temp_ptn->length != VARIABLE_LENGTH);
length_for_prt += ((temp_ptn->length) * blocks_per_1MB);
}
len = (total_num_of_blocks - 1) - (offset + ptn->start + length_for_prt);
ASSERT(len >= 0);
}
next_ptr_start_adr = ptn->start + len;
if(target_is_interleaved_mode()) {
ptable_add(&flash_ptable, ptn->name, offset + (ptn->start / 2),
(len / 2), ptn->flags, TYPE_APPS_PARTITION, PERM_WRITEABLE);
}
else {
ptable_add(&flash_ptable, ptn->name, offset + ptn->start,
len, ptn->flags, TYPE_APPS_PARTITION, PERM_WRITEABLE);
}
}
smem_add_modem_partitions(&flash_ptable);
ptable_dump(&flash_ptable);
flash_set_ptable(&flash_ptable);
}
void platform_init(void)
{
unsigned base_addr;
unsigned char slot;
unsigned platform_id = board_platform_id();
static pm8921_dev_t pmic;
/* Initialize PMIC driver */
pmic.read = (pm8921_read_func) & pa1_ssbi2_read_bytes;
pmic.write = (pm8921_write_func) & pa1_ssbi2_write_bytes;
pm8921_init(&pmic);
keys_add_source(&event_source);
switch(platform_id) {
case MSM8960:
case MSM8960AB:
case APQ8060AB:
case MSM8260AB:
case MSM8660AB:
msm8960_keypad_init();
break;
case MSM8130:
case MSM8230:
case MSM8630:
case MSM8930:
case MSM8130AA:
case MSM8230AA:
case MSM8630AA:
case MSM8930AA:
case MSM8930AB:
case MSM8630AB:
case MSM8230AB:
case MSM8130AB:
case APQ8030AB:
case APQ8030:
case APQ8030AA:
msm8930_keypad_init();
break;
case APQ8064:
case MPQ8064:
case APQ8064AA:
case APQ8064AB:
apq8064_keypad_init();
break;
default:
dprintf(CRITICAL,"Keyboard is not supported for platform: %d\n",platform_id);
};
#ifdef QCOM_ENABLE_EMMC
unsigned mmc_sdc_base[] = { MSM_SDC1_BASE, MSM_SDC2_BASE, MSM_SDC3_BASE, MSM_SDC4_BASE };
/* Trying Slot 1 first */
slot = 1;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
/* Trying Slot 3 next */
slot = 3;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
#endif
}
void target_init(void)
{
unsigned base_addr;
unsigned char slot;
unsigned platform_id = board_platform_id();
dprintf(INFO, "target_init()\n");
pu_reason = target_check_power_on_reason();
reboot_mode = check_reboot_mode();
/* Initialize PMIC driver */
pmic.read = (pm8921_read_func) & pa1_ssbi2_read_bytes;
pmic.write = (pm8921_write_func) & pa1_ssbi2_write_bytes;
pm8921_init(&pmic);
target_shutdown_for_battinfo();
target_shutdown_for_pwrkey();
/* Keypad init */
keys_init();
if((platform_id == MSM8960) ||
(platform_id == MSM8960AB) ||
(platform_id == APQ8060AB) ||
(platform_id == MSM8260AB) ||
(platform_id == MSM8660AB))
{
msm8960_keypad_init();
}
else if((platform_id == MSM8230) ||
(platform_id == MSM8630) ||
(platform_id == MSM8930) ||
(platform_id == MSM8230AA) ||
(platform_id == MSM8630AA) ||
(platform_id == MSM8930AA))
{
msm8930_keypad_init();
}
else if((platform_id == APQ8064) ||
(platform_id == MPQ8064) ||
(platform_id == APQ8064AB))
{
apq8064_keypad_init();
}
/* Display splash screen if enabled */
#if DISPLAY_SPLASH_SCREEN
if (board_target_id() == LINUX_MACHTYPE_8960_CDP || (board_target_id() == LINUX_MACHTYPE_8960_MITWOA))
panel_backlight_on_mitwoa(0);
display_init();
dprintf(INFO, "Diplay initialized\n");
mdelay(34);
if (board_target_id() == LINUX_MACHTYPE_8064_MITWO || (board_target_id() == LINUX_MACHTYPE_8064_MTP))
panel_backlight_on_mitwo(1);
else
panel_backlight_on_mitwoa(1);
#endif
if ((platform_id == MSM8960) || (platform_id == MSM8960AB) ||
(platform_id == APQ8060AB) || (platform_id == MSM8260AB) ||
(platform_id == MSM8660AB) || (platform_id == MSM8660A) ||
(platform_id == MSM8260A) || (platform_id == APQ8060A))
/* Enable Hardware CE */
platform_ce_type = CRYPTO_ENGINE_TYPE_HW;
/* Trying Slot 1 first */
slot = 1;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
/* Trying Slot 3 next */
slot = 3;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void target_init(void)
{
unsigned base_addr;
unsigned char slot;
unsigned platform_id = board_platform_id();
dprintf(INFO, "target_init()\n");
/* Initialize PMIC driver */
pmic.read = (pm8921_read_func) & pa1_ssbi2_read_bytes;
pmic.write = (pm8921_write_func) & pa1_ssbi2_write_bytes;
pm8921_init(&pmic);
/* Keypad init */
keys_init();
switch(platform_id) {
case MSM8960:
case MSM8960AB:
case APQ8060AB:
case MSM8260AB:
case MSM8660AB:
msm8960_keypad_init();
break;
case MSM8130:
case MSM8230:
case MSM8630:
case MSM8930:
case MSM8130AA:
case MSM8230AA:
case MSM8630AA:
case MSM8930AA:
case MSM8930AB:
case MSM8630AB:
case MSM8230AB:
case MSM8130AB:
case APQ8030AB:
case APQ8030:
case APQ8030AA:
msm8930_keypad_init();
break;
case APQ8064:
case MPQ8064:
case APQ8064AA:
case APQ8064AB:
apq8064_keypad_init();
break;
default:
dprintf(CRITICAL,"Keyboard is not supported for platform: %d\n",platform_id);
};
if ((platform_id == MSM8960) || (platform_id == MSM8960AB) ||
(platform_id == APQ8060AB) || (platform_id == MSM8260AB) ||
(platform_id == MSM8660AB) || (platform_id == MSM8660A) ||
(platform_id == MSM8260A) || (platform_id == APQ8060A) ||
(platform_id == APQ8064) || (platform_id == APQ8064AA) ||
(platform_id == APQ8064AB))
/* Enable Hardware CE */
platform_ce_type = CRYPTO_ENGINE_TYPE_HW;
/* Trying Slot 1 first */
slot = 1;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
/* Trying Slot 3 next */
slot = 3;
base_addr = mmc_sdc_base[slot - 1];
if (mmc_boot_main(slot, base_addr)) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
