static void __init msm7x27a_uartdm_config(void)
{
msm7x27a_cfg_uart2dm_serial();
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
if (cpu_is_msm8625() || cpu_is_msm8625q())
msm8625_device_uart_dm1.dev.platform_data =
&msm_uart_dm1_pdata;
else
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
}
static void __init msm7x27a_uartdm_config(void)
{
msm7x27a_cfg_uart2dm_serial();
/* set RX intterupt for WCN2243 */
if(BT_WCN2243 == get_hw_bt_device_model())
{
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
if (cpu_is_msm8625())
msm8625_device_uart_dm1.dev.platform_data =
&msm_uart_dm1_pdata;
else
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
}
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
/* Common functions for SURF/FFA/RUMI3 */
msm_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_cfg_uart2dm_serial();
#ifdef CONFIG_SERIAL_MSM_HS
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif
#ifdef CONFIG_USB_MSM_OTG_72K
msm_otg_pdata.swfi_latency =
msm7x27a_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
msm_device_gadget_peripheral.dev.platform_data =
&msm_gadget_pdata;
msm7x27a_cfg_smsc911x();
platform_add_devices(msm_footswitch_devices,
msm_num_footswitch_devices);
platform_add_devices(surf_ffa_devices,
ARRAY_SIZE(surf_ffa_devices));
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
#ifdef CONFIG_MMC_MSM
msm7627a_init_mmc();
#endif
msm_fb_add_devices();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7x2x_init_host();
#endif
msm_pm_set_platform_data(msm7x27a_pm_data,
ARRAY_SIZE(msm7x27a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
atmel_ts_pdata.min_x = 0;
atmel_ts_pdata.max_x = 480;
atmel_ts_pdata.min_y = 0;
atmel_ts_pdata.max_y = 320;
}
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
atmel_ts_i2c_info,
ARRAY_SIZE(atmel_ts_i2c_info));
#if defined(CONFIG_MSM_CAMERA)
msm7627a_camera_init();
#endif
platform_device_register(&kp_pdev);
platform_device_register(&hs_pdev);
/* configure it as a pdm function*/
if (gpio_tlmm_config(GPIO_CFG(LED_GPIO_PDM, 3,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_8MA), GPIO_CFG_ENABLE))
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, LED_GPIO_PDM);
else
platform_device_register(&led_pdev);
#ifdef CONFIG_MSM_RPC_VIBRATOR
if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
msm_init_pmic_vibrator();
#endif
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
}
