Esempi in C++ (Cpp) per msm7x27a_init_cam

Esempio n. 1

0

Mostra file

File: board-msm7627a-camera.c Progetto: 4ptiv4/d2usc-tw-jb

void __init msm7627a_camera_init(void)
{
	int rc;

#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1()) {
		qrd1_camera_gpio_cfg();
		platform_add_devices(camera_devices_qrd,
				ARRAY_SIZE(camera_devices_qrd));
	} else
		platform_add_devices(camera_devices_msm,
				ARRAY_SIZE(camera_devices_msm));
#endif
	if (!machine_is_msm7627a_qrd1())
		register_i2c_devices();
	rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);

	if (rc) {
		pr_err("%s: could not get regulators: %d\n", __func__, rc);
		return;
	}

	rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);

	if (rc) {
		pr_err("%s: could not set voltages: %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_MSM_CAMERA_V4L2)
	msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1())
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices_qrd,
				ARRAY_SIZE(i2c_camera_devices_qrd));
	else
#endif
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices,
				ARRAY_SIZE(i2c_camera_devices));
}

Esempio n. 2

0

Mostra file

File: board-msm7627a-camera.c Progetto: CrysisLTU/Project-X5pro-Kernel-u8800pro

void __init msm7627a_camera_init(void)
{
	int rc;
/* <DTS2012041003722 sibingsong 20120410 begin */
/*< DTS2012021000399 yuguangcai 20120211 begin */
#ifdef CONFIG_HUAWEI_CAMERA
		/*before camera probe, config the camera pwd gpio*/
		camera_sensor_pwd_config();
#endif
/* DTS2012021000399 yuguangcai 20120211 end > */
/* DTS2012041003722 sibingsong 20120410 end> */
#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1()) {
		qrd1_camera_gpio_cfg();
		platform_add_devices(camera_devices_qrd,
				ARRAY_SIZE(camera_devices_qrd));
	} else
		platform_add_devices(camera_devices_msm,
				ARRAY_SIZE(camera_devices_msm));
#endif
	if (!machine_is_msm7627a_qrd1())
		register_i2c_devices();
/* < DTS2012050205820 zhouqiwei 20120502 begin */
	if (WIFI_QUALCOMM == get_hw_wifi_device_type())
	{
		if (HW_DS != get_hw_ds_type())
		{
			rc = regulator_bulk_get(NULL, 
			ARRAY_SIZE(regs_camera_WIFI_QUALCOMM), regs_camera_WIFI_QUALCOMM);

			if (rc) {
				pr_err("%s: could not get regs_camera_WIFI_QUALCOMM: %d\n", __func__, rc);
					return;
			}

			rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera_WIFI_QUALCOMM), regs_camera_WIFI_QUALCOMM);

			if (rc) {
				pr_err("%s: could not set regs_camera_WIFI_QUALCOMM: %d\n", __func__, rc);
				return;
			}
		}
		else
		{
			rc = regulator_bulk_get(NULL, 
			ARRAY_SIZE(regs_camera_HW_DS), regs_camera_HW_DS);

			if (rc) {
				pr_err("%s: could not get regs_camera_HW_DSs: %d\n", __func__, rc);
				return;
			}

			rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera_HW_DS), regs_camera_HW_DS);

			if (rc) {
				pr_err("%s: could not set regs_camera_HW_DS: %d\n", __func__, rc);
				return;
			}
		}
	}
	else
	{
		rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);

		if (rc) {
			pr_err("%s: could not get regulators: %d\n", __func__, rc);
			return;
		}

		rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);

		if (rc) {
			pr_err("%s: could not set voltages: %d\n", __func__, rc);
			return;
		}
	}
/* DTS2012050205820 zhouqiwei 20120502 end > */

#if defined(CONFIG_MSM_CAMERA_V4L2)
	msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1())
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices_qrd,
				ARRAY_SIZE(i2c_camera_devices_qrd));
	else
#endif
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices,
				ARRAY_SIZE(i2c_camera_devices));
}

Esempio n. 3

0

Mostra file

File: board-msm7627a-camera.c Progetto: ElAbbassi/android_kernel_huawei_y301a2

void __init msm7627a_camera_init(void)
{

#ifndef CONFIG_MSM_CAMERA_V4L2
	int rc;
#endif

	pr_debug("msm7627a_camera_init Entered\n");

	if (machine_is_msm7627a_qrd3() || machine_is_msm8625_qrd7()) {
		ov7692_cam_req_gpio[0].gpio =
			GPIO_SKU7_CAM_VGA_SHDN;
		ov7692_cam_gpio_set_tbl[0].gpio = GPIO_SKU7_CAM_VGA_SHDN;
		ov7692_cam_gpio_set_tbl[1].gpio = GPIO_SKU7_CAM_VGA_SHDN;

		msm_camera_sensor_ov5647_data.sensor_pwd =
			GPIO_SKU7_CAM_5MP_SHDN_N;
		msm_camera_sensor_ov5647_data.sensor_reset =
			GPIO_SKU7_CAM_5MP_CAMIF_RESET;
	}

	/* LCD and camera power (VREG & LDO) init */
	if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
			|| machine_is_msm8625_evt()
			|| machine_is_msm7627a_qrd3()
			|| machine_is_msm8625_qrd7()) {
#ifndef CONFIG_MSM_CAMERA_V4L2
		lcd_camera_power_init();
#endif
		evb_camera_gpio_cfg();
	}

#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1()) {
		qrd1_camera_gpio_cfg();
		platform_add_devices(camera_devices_qrd,
				ARRAY_SIZE(camera_devices_qrd));
	} else if (machine_is_msm7627a_evb()
			|| machine_is_msm8625_evb()
			|| machine_is_msm8625_evt()
			|| machine_is_msm7627a_qrd3()
			|| machine_is_msm8625_qrd7()) {
		platform_add_devices(camera_devices_evb,
				ARRAY_SIZE(camera_devices_evb));
	} else if (machine_is_msm7627a_qrd3())
		return;
	else
		platform_add_devices(camera_devices_msm,
				ARRAY_SIZE(camera_devices_msm));
#endif
	if (!machine_is_msm7627a_qrd1() || !machine_is_msm7627a_evb()
					|| !machine_is_msm8625_evb()
					|| !machine_is_msm8625_evt()
					|| !machine_is_msm7627a_qrd3()
					|| !machine_is_msm8625_qrd7())
		register_i2c_devices();
#ifndef CONFIG_MSM_CAMERA_V4L2
	rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);

	if (rc) {
		pr_err("%s: could not get regulators: %d\n", __func__, rc);
		return;
	}

	rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);

	if (rc) {
		pr_err("%s: could not set voltages: %d\n", __func__, rc);
		return;
	}
#endif

#if defined(CONFIG_MSM_CAMERA_V4L2)
	msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1()) {
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices_qrd,
				ARRAY_SIZE(i2c_camera_devices_qrd));
	} else if (machine_is_msm7627a_evb()
			|| machine_is_msm8625_evb()
			|| machine_is_msm8625_evt()
			|| machine_is_msm7627a_qrd3()
			|| machine_is_msm8625_qrd7()) {
		pr_debug("machine_is_msm7627a_evb i2c_register_board_info\n");
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices_evb,
				ARRAY_SIZE(i2c_camera_devices_evb));
	} else
#endif
		pr_debug("i2c_register_board_info\n");
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices,
				ARRAY_SIZE(i2c_camera_devices));
}

Esempio n. 4

0

Mostra file

File: board-msm7627a-camera_vee3.c Progetto: paaaz/SKernel

void __init msm7627a_camera_init(void)
{

#ifndef CONFIG_MSM_CAMERA_V4L2
	int rc;
#endif

	pr_debug("msm7627a_camera_init Entered\n");

	/* LCD and camera power (VREG & LDO) init */
	if (machine_is_msm7627a_evb() || machine_is_msm8625_evb()
			|| machine_is_msm8625_evt()
			|| machine_is_msm7627a_qrd3()
			|| machine_is_msm8625_qrd7()) {
#ifndef CONFIG_MSM_CAMERA_V4L2
		lcd_camera_power_init();
#endif
		evb_camera_gpio_cfg();
	}

#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1()) {
		qrd1_camera_gpio_cfg();
		platform_add_devices(camera_devices_qrd,
				ARRAY_SIZE(camera_devices_qrd));
	} else if (machine_is_msm7627a_evb()
			|| machine_is_msm8625_evb()
			|| machine_is_msm8625_evt()
			|| machine_is_msm7627a_qrd3()
			|| machine_is_msm8625_qrd7()) {
		platform_add_devices(camera_devices_evb,
				ARRAY_SIZE(camera_devices_evb));
	} else if (machine_is_msm7627a_qrd3())
		return;
	else
		platform_add_devices(camera_devices_msm,
				ARRAY_SIZE(camera_devices_msm));
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
	rc = regulator_bulk_get(NULL, ARRAY_SIZE(regs_camera), regs_camera);

	if (rc) {
		pr_err("%s: could not get regulators: %d\n", __func__, rc);
		return;
	}

	rc = regulator_bulk_set_voltage(ARRAY_SIZE(regs_camera), regs_camera);

	if (rc) {
		pr_err("%s: could not set voltages: %d\n", __func__, rc);
		return;
	}
#endif

#if defined(CONFIG_MSM_CAMERA_V4L2)
	msm7x27a_init_cam();
#endif
#ifndef CONFIG_MSM_CAMERA_V4L2
	if (machine_is_msm7627a_qrd1()) {
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices_qrd,
				ARRAY_SIZE(i2c_camera_devices_qrd));
	} else if (machine_is_msm7627a_evb()
			|| machine_is_msm8625_evb()
			|| machine_is_msm8625_evt()
			|| machine_is_msm7627a_qrd3()
			|| machine_is_msm8625_qrd7()) {
		pr_debug("machine_is_msm7627a_evb i2c_register_board_info\n");
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices_evb,
				ARRAY_SIZE(i2c_camera_devices_evb));
	} else
#endif
		pr_debug("i2c_register_board_info\n");
		i2c_register_board_info(MSM_GSBI0_QUP_I2C_BUS_ID,
				i2c_camera_devices,
				ARRAY_SIZE(i2c_camera_devices));
}