Esempi in C++ (Cpp) per msm_mpm_send_interrupt

Esempio n. 1

File: mpm.c Progetto: AndyOpie/android_kernel_lge_msm7x27-3.0.x

static void msm_mpm_set(bool wakeset)
{
	uint32_t *irqs;
	unsigned int reg;
	int i;

	irqs = wakeset ? msm_mpm_wake_irq : msm_mpm_enabled_irq;
	for (i = 0; i < MSM_MPM_REG_WIDTH; i++) {
		reg = MSM_MPM_REQUEST_REG_ENABLE;
		msm_mpm_write(reg, i, irqs[i]);

		reg = MSM_MPM_REQUEST_REG_DETECT_CTL;
		msm_mpm_write(reg, i, msm_mpm_detect_ctl[i]);

		reg = MSM_MPM_REQUEST_REG_POLARITY;
		msm_mpm_write(reg, i, msm_mpm_polarity[i]);

		reg = MSM_MPM_REQUEST_REG_CLEAR;
		msm_mpm_write(reg, i, 0xffffffff);
	}

	/* Ensure that the set operation is complete before sending the
	 * interrupt
	 */
	mb();
	msm_mpm_send_interrupt();
}

Esempio n. 2

File: mpm.c Progetto: AKToronto/IronBorn2

static void msm_mpm_clear(void)
{
	int i;

	for (i = 0; i < MSM_MPM_REG_WIDTH; i++) {
		msm_mpm_write(MSM_MPM_REQUEST_REG_ENABLE, i, 0);
		msm_mpm_write(MSM_MPM_REQUEST_REG_CLEAR, i, 0xffffffff);
	}

	
	mb();
	msm_mpm_send_interrupt();
}

Esempio n. 3

File: mpm.c Progetto: AndyOpie/android_kernel_lge_msm7x27-3.0.x

static void msm_mpm_clear(void)
{
	int i;

	for (i = 0; i < MSM_MPM_REG_WIDTH; i++) {
		msm_mpm_write(MSM_MPM_REQUEST_REG_ENABLE, i, 0);
		msm_mpm_write(MSM_MPM_REQUEST_REG_CLEAR, i, 0xffffffff);
	}

	/* Ensure the clear is complete before sending the interrupt */
	mb();
	msm_mpm_send_interrupt();
}

Esempio n. 4

File: mpm.c Progetto: GunioRobot/EVO-3D-

static void msm_mpm_set(bool wakeset)
{
	uint32_t *irqs;
	unsigned int reg;
	int i;

	irqs = wakeset ? msm_mpm_wake_irq : msm_mpm_enabled_irq;
	for (i = 0; i < MSM_MPM_REG_WIDTH; i++) {
		reg = MSM_MPM_REQUEST_REG_ENABLE;
		msm_mpm_write(reg, i, irqs[i]);

		reg = MSM_MPM_REQUEST_REG_DETECT_CTL;
		msm_mpm_write(reg, i, msm_mpm_detect_ctl[i]);

		reg = MSM_MPM_REQUEST_REG_POLARITY;
		msm_mpm_write(reg, i, msm_mpm_polarity[i]);

		reg = MSM_MPM_REQUEST_REG_CLEAR;
		msm_mpm_write(reg, i, 0xffffffff);
	}

	msm_mpm_write_barrier();
	msm_mpm_send_interrupt();
}

Esempio n. 5

File: mpm.c Progetto: Arunvasu/taoshan

static void msm_mpm_set(bool wakeset)
{
	uint32_t *irqs;
	unsigned int reg;
	int i;

	irqs = wakeset ? msm_mpm_wake_irq : msm_mpm_enabled_irq;
	for (i = 0; i < MSM_MPM_REG_WIDTH; i++) {
		reg = MSM_MPM_REQUEST_REG_ENABLE;
		msm_mpm_write(reg, i, irqs[i]);

		reg = MSM_MPM_REQUEST_REG_DETECT_CTL;
		msm_mpm_write(reg, i, msm_mpm_detect_ctl[i]);

		reg = MSM_MPM_REQUEST_REG_POLARITY;
		msm_mpm_write(reg, i, msm_mpm_polarity[i]);

		reg = MSM_MPM_REQUEST_REG_CLEAR;
		msm_mpm_write(reg, i, 0xffffffff);
#if 0
                
		/* print debug about gpio 69 which is the 13th bit for interrupt on mpm */
	        if (irqs == msm_mpm_wake_irq && i == 1) {
		printk(KERN_ERR "QCT %s 0x%x\n", __func__, irqs[i]);
		printk(KERN_ERR "QCT %s 0x%x\n", __func__, msm_mpm_detect_ctl[i]);
		printk(KERN_ERR "QCT %s 0x%x\n", __func__, msm_mpm_polarity[i]);
		} 
#endif
	}

	/* Ensure that the set operation is complete before sending the
	 * interrupt
	 */
	mb();
	msm_mpm_send_interrupt();
}