/*******************************************************************************
* mvSysCntmrInit - Initialize the Cntmr subsystem
*
* DESCRIPTION:
*
* INPUT:
* None
* OUTPUT:
* None
* RETURN:
* None
*
*******************************************************************************/
MV_STATUS mvSysCntmrInit(void)
{
MV_CNTMR_HAL_DATA halData;
halData.ctrlModel = mvCtrlModelGet();
halData.ctrlRev = mvCtrlRevGet();
halData.ctrlFamily=mvCtrlDevFamilyIdGet(halData.ctrlModel);
return mvCntmrHalInit(&halData);
}
/*******************************************************************************
* mvSysPexInit - Initialize the Pex subsystem
*
* DESCRIPTION:
*
* INPUT:
* None
* OUTPUT:
* None
* RETURN:
* None
*
*******************************************************************************/
MV_STATUS mvSysPexInit(MV_U32 pexIf, MV_PEX_TYPE pexType)
{
MV_PEX_HAL_DATA halData;
MV_UNIT_WIN_INFO addrWinMap[MAX_TARGETS + 1];
MV_STATUS status;
status = mvCtrlAddrWinMapBuild(addrWinMap, MAX_TARGETS + 1);
if(status == MV_OK)
status = mvPexWinInit(pexIf, pexType, addrWinMap);
if(status == MV_OK) {
halData.ctrlModel = mvCtrlModelGet();
halData.maxPexIf = mvCtrlPexMaxIfGet();
halData.ctrlFamily=mvCtrlDevFamilyIdGet(halData.ctrlModel);
status = mvPexInit(pexIf, pexType, &halData);
}
return status;
}
/*******************************************************************************
* mvSysUsbHalInit - Initialize the USB subsystem
*
* DESCRIPTION:
*
* INPUT:
* None
* OUTPUT:
* None
* RETURN:
* None
*
*******************************************************************************/
MV_STATUS mvSysUsbInit(MV_VOID)
{
MV_USB_HAL_DATA halData;
MV_STATUS status = MV_OK;
MV_U32 dev;
MV_UNIT_WIN_INFO addrWinMap[MAX_TARGETS + 1];
halData.ctrlModel = mvCtrlModelGet();
halData.ctrlRev = mvCtrlRevGet();
halData.ctrlFamily = mvCtrlDevFamilyIdGet(halData.ctrlModel);
status = mvCtrlAddrWinMapBuild(addrWinMap, MAX_TARGETS + 1);
#ifdef CONFIG_USB_EHCI
MV_BOOL isHost;
char envname[10], *env;
int maxUsbPorts = mvCtrlUsbMaxGet();
/* for ALP/A375: if using single usb2 port, use Virtual MAC ID since
MAC ID0 (usbActive =0) is connected to Physical MAC ID1 */
int id, mac_id[2] = {1, 0};
for (id = 0; id < maxUsbPorts ; id++) {
if (mvBoardIsUsbPortConnected(USB_UNIT_ID,id) == MV_FALSE)
continue;
if (maxUsbPorts == 1 && (halData.ctrlFamily == MV_88F67X0 ||
(halData.ctrlRev == MV_88F66XX_A0_ID && halData.ctrlFamily == MV_88F66X0)))
dev = mac_id[id];
else
dev = id;
sprintf(envname, "usb%dMode", dev);
env = getenv(envname);
if ((!env) || (strcmp(env, "device") == 0) || (strcmp(env, "Device") == 0))
isHost = MV_FALSE;
else
isHost = MV_TRUE;
if (status == MV_OK) /* Map DDR windows to EHCI */
#ifdef CONFIG_USB_XHCI_HCD
/* CONFIG_USB_XHCI_HCD indicate that both xHCI and eHCI are compiled:
* Last Boolean argument is used to indicate the HAL layer which unit is currently initiated */
status = mvUsbWinInit(dev, addrWinMap, MV_FALSE);
#else
status = mvUsbWinInit(dev, addrWinMap);
#endif
if (status == MV_OK)
status = mvUsbHalInit(dev, isHost, &halData);
if (status == MV_OK)
printf("USB2.0 %d: %s Mode\n", dev, (isHost == MV_TRUE ? "Host" : "Device"));
else
mvOsPrintf("%s: Error: USB2.0 initialization failed (port %d).\n", __func__, dev);
}
#endif
#ifdef CONFIG_USB_XHCI
MV_U32 reg;
for (dev = 0; dev < mvCtrlUsb3HostMaxGet(); dev++) {
if (mvBoardIsUsbPortConnected(USB3_UNIT_ID,dev) == MV_FALSE)
continue;
status = mvUsbUtmiPhyInit(dev, &halData);
if (halData.ctrlFamily == MV_88F66X0 || halData.ctrlFamily == MV_88F67X0) {
/* ALP/A375: Set UTMI PHY Selector:
* - Connect UTMI PHY to USB2 port of USB3 Host
* - Powers down the other unit (so USB3.0 unit's registers are accessible) */
reg = MV_REG_READ(USB_CLUSTER_CONTROL);
reg = (reg & (~0x1)) | 0x1;
MV_REG_WRITE(USB_CLUSTER_CONTROL, reg);
}
if (status == MV_OK) /* Map DDR windows to XHCI */
status = mvUsbWinInit(mvCtrlUsbMapGet(USB3_UNIT_ID, dev), addrWinMap, MV_TRUE);
if (status == MV_OK)
printf("USB3.0 %d: Host Mode\n", mvCtrlUsbMapGet(USB3_UNIT_ID, dev));
else
mvOsPrintf("%s: Error: USB3.0 initialization failed (port %d).\n", __func__,
mvCtrlUsbMapGet(USB3_UNIT_ID, dev));
}
#endif
return status;
}
