static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
mx51_efikamx_board_id();
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
mxc_init_imx_uart();
imx51_add_sdhci_esdhc_imx(0, NULL);
/* on < 1.2 boards both SD controllers are used */
if (system_rev < 0x12) {
imx51_add_sdhci_esdhc_imx(1, NULL);
mx51_efikamx_leds[2].default_trigger = "mmc1";
}
platform_device_register(&mx51_efikamx_leds_device);
imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
spi_register_board_info(mx51_efikamx_spi_board_info,
ARRAY_SIZE(mx51_efikamx_spi_board_info));
imx51_add_ecspi(0, &mx51_efikamx_spi_pdata);
if (system_rev == 0x11) {
gpio_request(EFIKAMX_RESET1_1, "reset");
gpio_direction_output(EFIKAMX_RESET1_1, 1);
} else {
gpio_request(EFIKAMX_RESET, "reset");
gpio_direction_output(EFIKAMX_RESET, 1);
}
}
static void __init mx51_efikamx_board_init(void)
{
mxc_cpu_common_init();
mxc_register_gpios();
CONFIG_IOMUX(mx51_efikamx_general_iomux_pins);
/* do ID pins first! */
if (machine_is_mx51_efikamx()) {
CONFIG_IOMUX(mx51_efikamx_id_iomux_pins);
} else if (machine_is_mx51_efikasb()) {
CONFIG_IOMUX(mx51_efikasb_id_iomux_pins);
CONFIG_IOMUX(mx51_efikasb_general_iomux_pins);
}
/* common platform configuration for all boards */
mx51_efikamx_init_uart();
mx51_efikamx_init_soc();
mx51_efikamx_init_nor();
mx51_efikamx_init_spi();
mx51_efikamx_init_i2c();
mx51_efikamx_init_pata();
/* we do board id late because it takes time to settle */
mx51_efikamx_board_id();
/* these all depend on board id */
mx51_efikamx_init_display();
mx51_efikamx_init_audio();
mx51_efikamx_init_pmic();
mx51_efikamx_init_mmc();
mx51_efikamx_init_leds();
mx51_efikamx_init_periph();
mx51_efikamx_init_usb();
pm_power_off = mx51_efikamx_power_off;
if (machine_is_mx51_efikamx()) {
mxc_free_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_ALT2);
mxc_free_iomux(MX51_PIN_EIM_LBA, IOMUX_CONFIG_GPIO);
DBG(("Smarttop Revision 1.%u", mx51_efikamx_revision() ));
} else if (machine_is_mx51_efikasb()) {
mx51_efikamx_init_battery();
/* dastardly code to give us 1.3 or 2.0 out of "1" or "2" */
DBG(("Smartbook Revision %u.%u\n",
mx51_efikamx_revision(),
((mx51_efikamx_revision() == 1) ? 3 : 0) ));
DBG(("Memory type %s\n", mx51_efikamx_memory() ));
}
}
static void __init mx51_efikamx_init(void)
{
imx51_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
ARRAY_SIZE(mx51efikamx_pads));
efika_board_common_init();
mx51_efikamx_board_id();
/* on < 1.2 boards both SD controllers are used */
if (system_rev < 0x12) {
imx51_add_sdhci_esdhc_imx(0, NULL);
imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
mx51_efikamx_leds[2].default_trigger = "mmc1";
} else
imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
gpio_led_register_device(-1, &mx51_efikamx_leds_data);
imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
if (system_rev == 0x11) {
gpio_request(EFIKAMX_RESET1_1, "reset");
gpio_direction_output(EFIKAMX_RESET1_1, 1);
} else {
gpio_request(EFIKAMX_RESET, "reset");
gpio_direction_output(EFIKAMX_RESET, 1);
}
/*
* enable wifi by default only on mx
* sb and mx have same wlan pin but the value to enable it are
* different :/
*/
gpio_request(EFIKA_WLAN_EN, "wlan_en");
gpio_direction_output(EFIKA_WLAN_EN, 0);
msleep(10);
gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
gpio_direction_output(EFIKA_WLAN_RESET, 0);
msleep(10);
gpio_set_value(EFIKA_WLAN_RESET, 1);
}
