int
getconnmode(void)
{
int mode = 0;
if (my_want_state_is_dont(TELOPT_ECHO))
mode |= MODE_ECHO;
if (localflow)
mode |= MODE_FLOW;
if ((eight & 1) || my_want_state_is_will(TELOPT_BINARY))
mode |= MODE_INBIN;
if (eight & 2)
mode |= MODE_OUT8;
if (his_want_state_is_will(TELOPT_BINARY))
mode |= MODE_OUTBIN;
#ifdef KLUDGELINEMODE
if (kludgelinemode) {
if (my_want_state_is_dont(TELOPT_SGA)) {
mode |= (MODE_TRAPSIG|MODE_EDIT);
if (dontlecho && (clocks.echotoggle > clocks.modenegotiated)) {
mode &= ~MODE_ECHO;
}
}
return(mode);
}
#endif
if (my_want_state_is_will(TELOPT_LINEMODE))
mode |= linemode;
return(mode);
}
static void
dontoption(int option)
{
if (will_wont_resp[option]) {
--will_wont_resp[option];
if (will_wont_resp[option] && my_state_is_wont(option))
--will_wont_resp[option];
}
if ((will_wont_resp[option] == 0) && my_want_state_is_will(option)) {
switch (option) {
case TELOPT_LINEMODE:
linemode = 0; /* put us back to the default state */
break;
#ifdef OLD_ENVIRON
case TELOPT_NEW_ENVIRON:
/*
* The new environ option wasn't recognized, try
* the old one.
*/
send_will(TELOPT_OLD_ENVIRON, 1);
telopt_environ = TELOPT_OLD_ENVIRON;
break;
#endif
}
/* we always accept a DONT */
set_my_want_state_wont(option);
if (my_state_is_will(option))
send_wont(option, 0);
setconnmode(0); /* Set new tty mode */
}
set_my_state_wont(option);
}
void
setconnmode (int force)
{
#ifdef ENCRYPTION
static int enc_passwd = 0;
#endif /* ENCRYPTION */
register int newmode;
newmode = getconnmode () | (force ? MODE_FORCE : 0);
TerminalNewMode (newmode);
#ifdef ENCRYPTION
if ((newmode & (MODE_ECHO | MODE_EDIT)) == MODE_EDIT)
{
if (my_want_state_is_will (TELOPT_ENCRYPT)
&& (enc_passwd == 0) && !encrypt_output)
{
encrypt_request_start (0, 0);
enc_passwd = 1;
}
}
else
{
if (enc_passwd)
{
encrypt_request_end ();
enc_passwd = 0;
}
}
#endif /* ENCRYPTION */
}
void send_will(int option, int init) {
if (init) {
if ((will_wont_resp[option] == 0 && my_state_is_will(option))||
my_want_state_is_will(option))
return;
set_my_want_state_will(option);
will_wont_resp[option]++;
}
netoprintf((char *) will, option);
DIAG(TD_OPTIONS, printoption("td: send will", option));
}
int
TerminalSpecialChars (int c)
{
if (c == termIntChar)
{
intp ();
return 0;
}
else if (c == termQuitChar)
{
#ifdef KLUDGELINEMODE
if (kludgelinemode)
sendbrk ();
else
#endif
sendabort ();
return 0;
}
else if (c == termEofChar)
{
if (my_want_state_is_will (TELOPT_LINEMODE))
{
sendeof ();
return 0;
}
return 1;
}
else if (c == termSuspChar)
{
sendsusp ();
return (0);
}
else if (c == termFlushChar)
{
xmitAO (); /* Transmit Abort Output */
return 0;
}
else if (!MODE_LOCAL_CHARS (globalmode))
{
if (c == termKillChar)
{
xmitEL ();
return 0;
}
else if (c == termEraseChar)
{
xmitEC (); /* Transmit Erase Character */
return 0;
}
}
return 1;
}
void
send_will(int c, int init)
{
if (init) {
if (((will_wont_resp[c] == 0) && my_state_is_will(c)) ||
my_want_state_is_will(c))
return;
set_my_want_state_will(c);
will_wont_resp[c]++;
}
NET2ADD(IAC, WILL);
NETADD(c);
printoption("SENT", WILL, c);
}
int
Scheduler(int block) /* should we block in the select ? */
{
/* One wants to be a bit careful about setting returnValue
* to one, since a one implies we did some useful work,
* and therefore probably won't be called to block next
* time (TN3270 mode only).
*/
int returnValue;
int netin, netout, netex, ttyin, ttyout;
/* Decide which rings should be processed */
netout = ring_full_count(&netoring) &&
(flushline ||
(my_want_state_is_wont(TELOPT_LINEMODE)
#ifdef KLUDGELINEMODE
&& (!kludgelinemode || my_want_state_is_do(TELOPT_SGA))
#endif
) ||
my_want_state_is_will(TELOPT_BINARY));
ttyout = ring_full_count(&ttyoring);
ttyin = ring_empty_count(&ttyiring);
netin = !ISend && ring_empty_count(&netiring);
netex = !SYNCHing;
/* If we have seen a signal recently, reset things */
if (scheduler_lockout_tty) {
ttyin = ttyout = 0;
}
/* Call to system code to process rings */
returnValue = process_rings(netin, netout, netex, ttyin, ttyout, !block);
/* Now, look at the input rings, looking for work to do. */
if (ring_full_count(&ttyiring)) {
returnValue |= telsnd();
}
if (ring_full_count(&netiring)) {
returnValue |= telrcv();
}
return returnValue;
}
void
SetIn3270(void)
{
if (Sent3270TerminalType && my_want_state_is_will(TELOPT_BINARY)
&& my_want_state_is_do(TELOPT_BINARY) && !donebinarytoggle) {
if (!In3270) {
In3270 = 1;
Init3270(); /* Initialize 3270 functions */
/* initialize terminal key mapping */
InitTerminal(); /* Start terminal going */
setconnmode(0);
}
} else {
if (In3270) {
StopScreen(1);
In3270 = 0;
Stop3270(); /* Tell 3270 we aren't here anymore */
setconnmode(0);
}
}
}
static void
dontoption(int option)
{
if (will_wont_resp[option]) {
--will_wont_resp[option];
if (will_wont_resp[option] && my_state_is_wont(option))
--will_wont_resp[option];
}
if ((will_wont_resp[option] == 0) && my_want_state_is_will(option)) {
switch (option) {
case TELOPT_LINEMODE:
linemode = 0; /* put us back to the default state */
break;
}
/* we always accept a DONT */
set_my_want_state_wont(option);
if (my_state_is_will(option))
send_wont(option, 0);
setconnmode(0); /* Set new tty mode */
}
set_my_state_wont(option);
}
/*
* localstat
*
* This function handles all management of linemode.
*
* Linemode allows the client to do the local editing of data
* and send only complete lines to the server. Linemode state is
* based on the state of the pty driver. If the pty is set for
* external processing, then we can use linemode. Further, if we
* can use real linemode, then we can look at the edit control bits
* in the pty to determine what editing the client should do.
*
* Linemode support uses the following state flags to keep track of
* current and desired linemode state.
* alwayslinemode : true if -l was specified on the telnetd
* command line. It means to have linemode on as much as
* possible.
*
* lmodetype: signifies whether the client can
* handle real linemode, or if use of kludgeomatic linemode
* is preferred. It will be set to one of the following:
* REAL_LINEMODE : use linemode option
* NO_KLUDGE : don't initiate kludge linemode.
* KLUDGE_LINEMODE : use kludge linemode
* NO_LINEMODE : client is ignorant of linemode
*
* linemode, uselinemode : linemode is true if linemode
* is currently on, uselinemode is the state that we wish
* to be in. If another function wishes to turn linemode
* on or off, it sets or clears uselinemode.
*
* editmode, useeditmode : like linemode/uselinemode, but
* these contain the edit mode states (edit and trapsig).
*
* The state variables correspond to some of the state information
* in the pty.
* linemode:
* In real linemode, this corresponds to whether the pty
* expects external processing of incoming data.
* In kludge linemode, this more closely corresponds to the
* whether normal processing is on or not. (ICANON in
* system V, or COOKED mode in BSD.)
* If the -l option was specified (alwayslinemode), then
* an attempt is made to force external processing on at
* all times.
*
* The following heuristics are applied to determine linemode
* handling within the server.
* 1) Early on in starting up the server, an attempt is made
* to negotiate the linemode option. If this succeeds
* then lmodetype is set to REAL_LINEMODE and all linemode
* processing occurs in the context of the linemode option.
* 2) If the attempt to negotiate the linemode option failed,
* and the "-k" (don't initiate kludge linemode) isn't set,
* then we try to use kludge linemode. We test for this
* capability by sending "do Timing Mark". If a positive
* response comes back, then we assume that the client
* understands kludge linemode (ech!) and the
* lmodetype flag is set to KLUDGE_LINEMODE.
* 3) Otherwise, linemode is not supported at all and
* lmodetype remains set to NO_LINEMODE (which happens
* to be 0 for convenience).
* 4) At any time a command arrives that implies a higher
* state of linemode support in the client, we move to that
* linemode support.
*
* A short explanation of kludge linemode is in order here.
* 1) The heuristic to determine support for kludge linemode
* is to send a do timing mark. We assume that a client
* that supports timing marks also supports kludge linemode.
* A risky proposition at best.
* 2) Further negotiation of linemode is done by changing the
* the server's state regarding SGA. If server will SGA,
* then linemode is off, if server won't SGA, then linemode
* is on.
*/
void
localstat(void)
{
int need_will_echo = 0;
/*
* Check for changes to flow control if client supports it.
*/
flowstat();
/*
* Check linemode on/off state
*/
uselinemode = tty_linemode();
/*
* If alwayslinemode is on, and pty is changing to turn it off, then
* force linemode back on.
*/
if (alwayslinemode && linemode && !uselinemode) {
uselinemode = 1;
tty_setlinemode(uselinemode);
}
if (uselinemode) {
/*
* Check for state of BINARY options.
*
* We only need to do the binary dance if we are actually going
* to use linemode. As this confuses some telnet clients
* that don't support linemode, and doesn't gain us
* anything, we don't do it unless we're doing linemode.
* -Crh ([email protected])
*/
if (tty_isbinaryin()) {
if (his_want_state_is_wont(TELOPT_BINARY))
send_do(TELOPT_BINARY, 1);
} else {
if (his_want_state_is_will(TELOPT_BINARY))
send_dont(TELOPT_BINARY, 1);
}
if (tty_isbinaryout()) {
if (my_want_state_is_wont(TELOPT_BINARY))
send_will(TELOPT_BINARY, 1);
} else {
if (my_want_state_is_will(TELOPT_BINARY))
send_wont(TELOPT_BINARY, 1);
}
}
#ifdef ENCRYPTION
/*
* If the terminal is not echoing, but editing is enabled,
* something like password input is going to happen, so
* if we the other side is not currently sending encrypted
* data, ask the other side to start encrypting.
*/
if (his_state_is_will(TELOPT_ENCRYPT)) {
static int enc_passwd = 0;
if (uselinemode && !tty_isecho() && tty_isediting()
&& (enc_passwd == 0) && !decrypt_input) {
encrypt_send_request_start();
enc_passwd = 1;
} else if (enc_passwd) {
encrypt_send_request_end();
enc_passwd = 0;
}
}
#endif /* ENCRYPTION */
/*
* Do echo mode handling as soon as we know what the
* linemode is going to be.
* If the pty has echo turned off, then tell the client that
* the server will echo. If echo is on, then the server
* will echo if in character mode, but in linemode the
* client should do local echoing. The state machine will
* not send anything if it is unnecessary, so don't worry
* about that here.
*
* If we need to send the WILL ECHO (because echo is off),
* then delay that until after we have changed the MODE.
* This way, when the user is turning off both editing
* and echo, the client will get editing turned off first.
* This keeps the client from going into encryption mode
* and then right back out if it is doing auto-encryption
* when passwords are being typed.
*/
if (uselinemode) {
if (tty_isecho())
send_wont(TELOPT_ECHO, 1);
else
need_will_echo = 1;
#ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_OK)
lmodetype = KLUDGE_LINEMODE;
#endif
}
/*
* If linemode is being turned off, send appropriate
* command and then we're all done.
*/
if (!uselinemode && linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_dont(TELOPT_LINEMODE, 1);
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE)
send_will(TELOPT_SGA, 1);
# endif /* KLUDGELINEMODE */
send_will(TELOPT_ECHO, 1);
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* If using real linemode check edit modes for possible later use.
* If we are in kludge linemode, do the SGA negotiation.
*/
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
useeditmode = 0;
if (tty_isediting())
useeditmode |= MODE_EDIT;
if (tty_istrapsig())
useeditmode |= MODE_TRAPSIG;
if (tty_issofttab())
useeditmode |= MODE_SOFT_TAB;
if (tty_islitecho())
useeditmode |= MODE_LIT_ECHO;
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE) {
if (tty_isediting() && uselinemode)
send_wont(TELOPT_SGA, 1);
else
send_will(TELOPT_SGA, 1);
}
# endif /* KLUDGELINEMODE */
/*
* Negotiate linemode on if pty state has changed to turn it on.
* Send appropriate command and send along edit mode, then all done.
*/
if (uselinemode && !linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_LINEMODE) {
send_wont(TELOPT_SGA, 1);
} else if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_do(TELOPT_LINEMODE, 1);
/* send along edit modes */
output_data("%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
editmode = useeditmode;
# ifdef KLUDGELINEMODE
}
# endif /* KLUDGELINEMODE */
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* None of what follows is of any value if not using
* real linemode.
*/
if (lmodetype < REAL_LINEMODE)
goto done;
# endif /* KLUDGELINEMODE */
if (linemode && his_state_is_will(TELOPT_LINEMODE)) {
/*
* If edit mode changed, send edit mode.
*/
if (useeditmode != editmode) {
/*
* Send along appropriate edit mode mask.
*/
output_data("%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
editmode = useeditmode;
}
/*
* Check for changes to special characters in use.
*/
start_slc(0);
check_slc();
(void) end_slc(0);
}
done:
if (need_will_echo)
send_will(TELOPT_ECHO, 1);
/*
* Some things should be deferred until after the pty state has
* been set by the local process. Do those things that have been
* deferred now. This only happens once.
*/
if (_terminit == 0) {
_terminit = 1;
defer_terminit();
}
netflush();
set_termbuf();
return;
} /* end of localstat */
void
optionstatus (void)
{
register int i;
extern char will_wont_resp[], do_dont_resp[];
for (i = 0; i < 256; i++)
{
if (do_dont_resp[i])
{
if (TELOPT_OK (i))
printf ("resp DO_DONT %s: %d\n", TELOPT (i), do_dont_resp[i]);
else if (TELCMD_OK (i))
printf ("resp DO_DONT %s: %d\n", TELCMD (i), do_dont_resp[i]);
else
printf ("resp DO_DONT %d: %d\n", i, do_dont_resp[i]);
if (my_want_state_is_do (i))
{
if (TELOPT_OK (i))
printf ("want DO %s\n", TELOPT (i));
else if (TELCMD_OK (i))
printf ("want DO %s\n", TELCMD (i));
else
printf ("want DO %d\n", i);
}
else
{
if (TELOPT_OK (i))
printf ("want DONT %s\n", TELOPT (i));
else if (TELCMD_OK (i))
printf ("want DONT %s\n", TELCMD (i));
else
printf ("want DONT %d\n", i);
}
}
else
{
if (my_state_is_do (i))
{
if (TELOPT_OK (i))
printf (" DO %s\n", TELOPT (i));
else if (TELCMD_OK (i))
printf (" DO %s\n", TELCMD (i));
else
printf (" DO %d\n", i);
}
}
if (will_wont_resp[i])
{
if (TELOPT_OK (i))
printf ("resp WILL_WONT %s: %d\n", TELOPT (i), will_wont_resp[i]);
else if (TELCMD_OK (i))
printf ("resp WILL_WONT %s: %d\n", TELCMD (i), will_wont_resp[i]);
else
printf ("resp WILL_WONT %d: %d\n", i, will_wont_resp[i]);
if (my_want_state_is_will (i))
{
if (TELOPT_OK (i))
printf ("want WILL %s\n", TELOPT (i));
else if (TELCMD_OK (i))
printf ("want WILL %s\n", TELCMD (i));
else
printf ("want WILL %d\n", i);
}
else
{
if (TELOPT_OK (i))
printf ("want WONT %s\n", TELOPT (i));
else if (TELCMD_OK (i))
printf ("want WONT %s\n", TELCMD (i));
else
printf ("want WONT %d\n", i);
}
}
else
{
if (my_state_is_will (i))
{
if (TELOPT_OK (i))
printf (" WILL %s\n", TELOPT (i));
else if (TELCMD_OK (i))
printf (" WILL %s\n", TELCMD (i));
else
printf (" WILL %d\n", i);
}
}
}
}
void dontoption(int option) {
/*
* Process client input.
*/
DIAG(TD_OPTIONS, printoption("td: recv dont", option));
if (will_wont_resp[option]) {
will_wont_resp[option]--;
if (will_wont_resp[option] && my_state_is_wont(option))
will_wont_resp[option]--;
}
if ((will_wont_resp[option] == 0) && (my_want_state_is_will(option))) {
switch (option) {
case TELOPT_BINARY:
init_termbuf();
tty_binaryout(0);
set_termbuf();
break;
case TELOPT_ECHO: /* we should stop echoing */
#ifdef LINEMODE
#ifdef KLUDGELINEMODE
if (lmodetype == NO_LINEMODE)
#else
if (his_state_is_wont(TELOPT_LINEMODE))
#endif
#endif
{
init_termbuf();
tty_setecho(0);
set_termbuf();
}
break;
case TELOPT_SGA:
#if defined(LINEMODE) && defined(KLUDGELINEMODE)
/*
* If kludge linemode is in use, then we
* must process an incoming do SGA for
* linemode purposes.
*/
if (lmodetype == KLUDGE_LINEMODE) {
/*
* The client is asking us to turn
* linemode on.
*/
clientstat(TELOPT_LINEMODE, WILL, 0);
/*
* If we did not turn line mode on,
* then what do we say? Will SGA?
* This violates design of telnet.
* Gross. Very Gross.
*/
}
break;
#else
set_my_want_state_wont(option);
if (my_state_is_will(option))
send_wont(option, 0);
set_my_state_wont(option);
if (turn_on_sga ^= 1) send_will(option,1);
return;
#endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */
default:
break;
}
set_my_want_state_wont(option);
if (my_state_is_will(option))
send_wont(option, 0);
}
set_my_state_wont(option);
}
/*
* localstat
*
* This function handles all management of linemode.
*
* Linemode allows the client to do the local editing of data
* and send only complete lines to the server. Linemode state is
* based on the state of the pty driver. If the pty is set for
* external processing, then we can use linemode. Further, if we
* can use real linemode, then we can look at the edit control bits
* in the pty to determine what editing the client should do.
*
* Linemode support uses the following state flags to keep track of
* current and desired linemode state.
* alwayslinemode : true if -l was specified on the telnetd
* command line. It means to have linemode on as much as
* possible.
*
* lmodetype: signifies whether the client can
* handle real linemode, or if use of kludgeomatic linemode
* is preferred. It will be set to one of the following:
* REAL_LINEMODE : use linemode option
* NO_KLUDGE : don't initiate kludge linemode.
* KLUDGE_LINEMODE : use kludge linemode
* NO_LINEMODE : client is ignorant of linemode
*
* linemode, uselinemode : linemode is true if linemode
* is currently on, uselinemode is the state that we wish
* to be in. If another function wishes to turn linemode
* on or off, it sets or clears uselinemode.
*
* editmode, useeditmode : like linemode/uselinemode, but
* these contain the edit mode states (edit and trapsig).
*
* The state variables correspond to some of the state information
* in the pty.
* linemode:
* In real linemode, this corresponds to whether the pty
* expects external processing of incoming data.
* In kludge linemode, this more closely corresponds to the
* whether normal processing is on or not. (ICANON in
* system V, or COOKED mode in BSD.)
* If the -l option was specified (alwayslinemode), then
* an attempt is made to force external processing on at
* all times.
*
* The following heuristics are applied to determine linemode
* handling within the server.
* 1) Early on in starting up the server, an attempt is made
* to negotiate the linemode option. If this succeeds
* then lmodetype is set to REAL_LINEMODE and all linemode
* processing occurs in the context of the linemode option.
* 2) If the attempt to negotiate the linemode option failed,
* and the "-k" (don't initiate kludge linemode) isn't set,
* then we try to use kludge linemode. We test for this
* capability by sending "do Timing Mark". If a positive
* response comes back, then we assume that the client
* understands kludge linemode (ech!) and the
* lmodetype flag is set to KLUDGE_LINEMODE.
* 3) Otherwise, linemode is not supported at all and
* lmodetype remains set to NO_LINEMODE (which happens
* to be 0 for convenience).
* 4) At any time a command arrives that implies a higher
* state of linemode support in the client, we move to that
* linemode support.
*
* A short explanation of kludge linemode is in order here.
* 1) The heuristic to determine support for kludge linemode
* is to send a do timing mark. We assume that a client
* that supports timing marks also supports kludge linemode.
* A risky proposition at best.
* 2) Further negotiation of linemode is done by changing the
* the server's state regarding SGA. If server will SGA,
* then linemode is off, if server won't SGA, then linemode
* is on.
*/
void
localstat()
{
int need_will_echo = 0;
#if defined(CRAY2) && defined(UNICOS5)
/*
* Keep track of that ol' CR/NL mapping while we're in the
* neighborhood.
*/
newmap = tty_isnewmap();
#endif /* defined(CRAY2) && defined(UNICOS5) */
/*
* Check for state of BINARY options.
*/
if (tty_isbinaryin()) {
if (his_want_state_is_wont(TELOPT_BINARY))
send_do(TELOPT_BINARY, 1);
} else {
if (his_want_state_is_will(TELOPT_BINARY))
send_dont(TELOPT_BINARY, 1);
}
if (tty_isbinaryout()) {
if (my_want_state_is_wont(TELOPT_BINARY))
send_will(TELOPT_BINARY, 1);
} else {
if (my_want_state_is_will(TELOPT_BINARY))
send_wont(TELOPT_BINARY, 1);
}
/*
* Check for changes to flow control if client supports it.
*/
flowstat();
/*
* Check linemode on/off state
*/
uselinemode = tty_linemode();
/*
* If alwayslinemode is on, and pty is changing to turn it off, then
* force linemode back on.
*/
if (alwayslinemode && linemode && !uselinemode) {
uselinemode = 1;
tty_setlinemode(uselinemode);
}
/*
* Do echo mode handling as soon as we know what the
* linemode is going to be.
* If the pty has echo turned off, then tell the client that
* the server will echo. If echo is on, then the server
* will echo if in character mode, but in linemode the
* client should do local echoing. The state machine will
* not send anything if it is unnecessary, so don't worry
* about that here.
*
* If we need to send the WILL ECHO (because echo is off),
* then delay that until after we have changed the MODE.
* This way, when the user is turning off both editing
* and echo, the client will get editing turned off first.
* This keeps the client from going into encryption mode
* and then right back out if it is doing auto-encryption
* when passwords are being typed.
*/
if (uselinemode) {
if (tty_isecho())
send_wont(TELOPT_ECHO, 1);
else
need_will_echo = 1;
#ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_OK)
lmodetype = KLUDGE_LINEMODE;
#endif
}
/*
* If linemode is being turned off, send appropriate
* command and then we're all done.
*/
if (!uselinemode && linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_dont(TELOPT_LINEMODE, 1);
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE)
send_will(TELOPT_SGA, 1);
# endif /* KLUDGELINEMODE */
send_will(TELOPT_ECHO, 1);
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* If using real linemode check edit modes for possible later use.
* If we are in kludge linemode, do the SGA negotiation.
*/
if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
useeditmode = 0;
if (tty_isediting())
useeditmode |= MODE_EDIT;
if (tty_istrapsig())
useeditmode |= MODE_TRAPSIG;
if (tty_issofttab())
useeditmode |= MODE_SOFT_TAB;
if (tty_islitecho())
useeditmode |= MODE_LIT_ECHO;
# ifdef KLUDGELINEMODE
} else if (lmodetype == KLUDGE_LINEMODE) {
if (tty_isediting() && uselinemode)
send_wont(TELOPT_SGA, 1);
else
send_will(TELOPT_SGA, 1);
}
# endif /* KLUDGELINEMODE */
/*
* Negotiate linemode on if pty state has changed to turn it on.
* Send appropriate command and send along edit mode, then all done.
*/
if (uselinemode && !linemode) {
# ifdef KLUDGELINEMODE
if (lmodetype == KLUDGE_LINEMODE) {
send_wont(TELOPT_SGA, 1);
} else if (lmodetype == REAL_LINEMODE) {
# endif /* KLUDGELINEMODE */
send_do(TELOPT_LINEMODE, 1);
/* send along edit modes */
(void) sprintf(nfrontp, "%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
nfrontp += 7;
editmode = useeditmode;
# ifdef KLUDGELINEMODE
}
# endif /* KLUDGELINEMODE */
linemode = uselinemode;
goto done;
}
# ifdef KLUDGELINEMODE
/*
* None of what follows is of any value if not using
* real linemode.
*/
if (lmodetype < REAL_LINEMODE)
goto done;
# endif /* KLUDGELINEMODE */
if (linemode && his_state_is_will(TELOPT_LINEMODE)) {
/*
* If edit mode changed, send edit mode.
*/
if (useeditmode != editmode) {
/*
* Send along appropriate edit mode mask.
*/
(void) sprintf(nfrontp, "%c%c%c%c%c%c%c", IAC, SB,
TELOPT_LINEMODE, LM_MODE, useeditmode,
IAC, SE);
nfrontp += 7;
editmode = useeditmode;
}
/*
* Check for changes to special characters in use.
*/
start_slc(0);
check_slc();
(void) end_slc(0);
}
done:
if (need_will_echo)
send_will(TELOPT_ECHO, 1);
/*
* Some things should be deferred until after the pty state has
* been set by the local process. Do those things that have been
* deferred now. This only happens once.
*/
if (_terminit == 0) {
_terminit = 1;
defer_terminit();
}
netflush();
set_termbuf();
return;
} /* end of localstat */
