/*ARGSUSED*/
static int
sbdp_suspend_devices_exit(dev_info_t *dip, void *arg)
{
struct dev_info *devi = DEVI(dip);
ndi_devi_exit(dip, devi->devi_circular);
return (DDI_WALK_CONTINUE);
}
/*
* vdds_find_node -- A common function to find a NIU nexus or NIU node.
*/
static dev_info_t *
vdds_find_node(uint64_t cookie, dev_info_t *sdip,
int (*match_func)(dev_info_t *dip, void *arg))
{
vdds_cb_arg_t arg;
dev_info_t *pdip;
int circ;
DBG1(NULL, "Called cookie=%lx\n", cookie);
arg.dip = NULL;
arg.cookie = cookie;
if (pdip = ddi_get_parent(sdip)) {
ndi_devi_enter(pdip, &circ);
}
ddi_walk_devs(sdip, match_func, (void *)&arg);
if (pdip != NULL) {
ndi_devi_exit(pdip, circ);
}
DBG1(NULL, "Returning dip=0x%p", arg.dip);
return (arg.dip);
}
/*
* check for a possible substitute node. This routine searches the
* children of parent_dip, looking for a node that:
* 1. is a prom node
* 2. binds to the same major number
* 3. there is no need to verify that the unit-address information
* match since it is likely that the substitute node
* will have none (e.g. disk) - this would be the reason the
* framework rejected it in the first place.
*
* assumes parent_dip is held
*/
static dev_info_t *
find_alternate_node(dev_info_t *parent_dip, major_t major)
{
int circ;
dev_info_t *child_dip;
/* lock down parent to keep children from being removed */
ndi_devi_enter(parent_dip, &circ);
for (child_dip = ddi_get_child(parent_dip); child_dip != NULL;
child_dip = ddi_get_next_sibling(child_dip)) {
/* look for obp node with matching major */
if ((ndi_dev_is_prom_node(child_dip) != 0) &&
(ddi_driver_major(child_dip) == major)) {
ndi_hold_devi(child_dip);
break;
}
}
ndi_devi_exit(parent_dip, circ);
return (child_dip);
}
/*
* translate a devfs pathname to one that will be acceptable
* by the prom. In most cases, there is no translation needed.
* For systems supporting generically named devices, the prom
* may support nodes such as 'disk' that do not have any unit
* address information (i.e. target,lun info). If this is the
* case, the ddi framework will reject the node as invalid and
* populate the devinfo tree with nodes froms the .conf file
* (e.g. sd). In this case, the names that show up in /devices
* are sd - since the prom only knows about 'disk' nodes, this
* routine detects this situation and does the conversion
* There are also cases such as pluto where the disk node in the
* prom is named "SUNW,ssd" but in /devices the name is "ssd".
*
* If MPxIO is enabled, the translation involves following
* pathinfo nodes to the "best" parent.
*
* return a 0 on success with the new device string in ret_buf.
* Otherwise return the appropriate error code as we may be called
* from the openprom driver.
*/
int
i_devname_to_promname(char *dev_name, char *ret_buf, size_t len)
{
dev_info_t *dip, *pdip, *cdip, *alt_dip = NULL;
mdi_pathinfo_t *pip = NULL;
char *dev_path, *prom_path;
char *unit_address, *minorname, *nodename;
major_t major;
char *rptr, *optr, *offline;
size_t olen, rlen;
int circ;
int ret = 0;
/* do some sanity checks */
if ((dev_name == NULL) || (ret_buf == NULL) ||
(strlen(dev_name) > MAXPATHLEN)) {
return (EINVAL);
}
/*
* Convert to a /devices name. Fail the translation if
* the name doesn't exist.
*/
dev_path = kmem_zalloc(MAXPATHLEN, KM_SLEEP);
if (resolve_devfs_name(dev_name, dev_path) != 0 ||
strncmp(dev_path, "/devices/", 9) != 0) {
kmem_free(dev_path, MAXPATHLEN);
return (EINVAL);
}
dev_name = dev_path + sizeof ("/devices") - 1;
bzero(ret_buf, len);
if (prom_finddevice(dev_name) != OBP_BADNODE) {
/* we are done */
(void) snprintf(ret_buf, len, "%s", dev_name);
kmem_free(dev_path, MAXPATHLEN);
return (0);
}
/*
* if we get here, then some portion of the device path is
* not understood by the prom. We need to look for alternate
* names (e.g. replace ssd by disk) and mpxio enabled devices.
*/
dip = e_ddi_hold_devi_by_path(dev_name, 0);
if (dip == NULL) {
cmn_err(CE_NOTE, "cannot find dip for %s", dev_name);
kmem_free(dev_path, MAXPATHLEN);
return (EINVAL);
}
prom_path = kmem_zalloc(MAXPATHLEN, KM_SLEEP);
rlen = len;
rptr = ret_buf;
if (!MDI_CLIENT(dip)) {
ret = i_devi_to_promname(dip, prom_path, &alt_dip);
if (ret == 0) {
minorname = strrchr(dev_name, ':');
if (minorname && (minorname[1] != '\0')) {
(void) strcat(prom_path, minorname);
}
(void) snprintf(rptr, rlen, "%s", prom_path);
}
} else {
/*
* if get to here, means dip is a vhci client
*/
offline = kmem_zalloc(len, KM_SLEEP); /* offline paths */
olen = len;
optr = offline;
/*
* The following code assumes that the phci client is at leaf
* level.
*/
ndi_devi_enter(dip, &circ);
while ((pip = mdi_get_next_phci_path(dip, pip)) != NULL) {
/*
* walk all paths associated to the client node
*/
bzero(prom_path, MAXPATHLEN);
/*
* replace with mdi_hold_path() when mpxio goes into
* genunix
*/
MDI_PI_LOCK(pip);
MDI_PI_HOLD(pip);
MDI_PI_UNLOCK(pip);
if (mdi_pi_pathname_obp(pip, prom_path) != NULL) {
/*
* The path has different obp path
*/
goto minor_pathinfo;
}
pdip = mdi_pi_get_phci(pip);
ndi_hold_devi(pdip);
/*
* Get obp path name of the phci node firstly.
* NOTE: if the alternate node of pdip exists,
* the third argument of the i_devi_to_promname()
* would be set to the alternate node.
*/
(void) i_devi_to_promname(pdip, prom_path, &alt_dip);
if (alt_dip != NULL) {
ndi_rele_devi(pdip);
pdip = alt_dip;
ndi_hold_devi(pdip);
}
nodename = ddi_node_name(dip);
unit_address = MDI_PI(pip)->pi_addr;
major = ddi_driver_major(dip);
cdip = find_alternate_node(pdip, major);
if (cdip) {
nodename = ddi_node_name(cdip);
}
/*
* node name + unitaddr to the prom_path
*/
(void) strcat(prom_path, "/");
(void) strcat(prom_path, nodename);
if (unit_address && (*unit_address)) {
(void) strcat(prom_path, "@");
(void) strcat(prom_path, unit_address);
}
if (cdip) {
/* hold from find_alternate_node */
ndi_rele_devi(cdip);
}
ndi_rele_devi(pdip);
minor_pathinfo:
minorname = strrchr(dev_name, ':');
if (minorname && (minorname[1] != '\0')) {
(void) strcat(prom_path, minorname);
}
if (MDI_PI_IS_ONLINE(pip)) {
(void) snprintf(rptr, rlen, "%s", prom_path);
rlen -= strlen(rptr) + 1;
rptr += strlen(rptr) + 1;
if (rlen <= 0) /* drop paths we can't store */
break;
} else { /* path is offline */
(void) snprintf(optr, olen, "%s", prom_path);
olen -= strlen(optr) + 1;
if (olen > 0) /* drop paths we can't store */
optr += strlen(optr) + 1;
}
MDI_PI_LOCK(pip);
MDI_PI_RELE(pip);
if (MDI_PI(pip)->pi_ref_cnt == 0)
cv_broadcast(&MDI_PI(pip)->pi_ref_cv);
MDI_PI_UNLOCK(pip);
}
ndi_devi_exit(dip, circ);
ret = 0;
if (rlen > 0) {
/* now add as much of offline to ret_buf as possible */
bcopy(offline, rptr, rlen);
}
kmem_free(offline, len);
}
/* release hold from e_ddi_hold_devi_by_path() */
ndi_rele_devi(dip);
ret_buf[len - 1] = '\0';
ret_buf[len - 2] = '\0';
kmem_free(dev_path, MAXPATHLEN);
kmem_free(prom_path, MAXPATHLEN);
return (ret);
}
/*
* Search for cached entries matching a devid
* Return two lists:
* a list of dev_info nodes, for those devices in the attached state
* a list of pathnames whose instances registered the given devid
* If the lists passed in are not sufficient to return the matching
* references, return the size of lists required.
* The dev_info nodes are returned with a hold that the caller must release.
*/
static int
e_devid_cache_devi_path_lists(ddi_devid_t devid, int retmax,
int *retndevis, dev_info_t **retdevis, int *retnpaths, char **retpaths)
{
nvp_devid_t *np;
int ndevis, npaths;
dev_info_t *dip, *pdip;
int circ;
int maxdevis = 0;
int maxpaths = 0;
ndevis = 0;
npaths = 0;
for (np = NVF_DEVID_LIST(dcfd); np; np = NVP_DEVID_NEXT(np)) {
if (np->nvp_devid == NULL)
continue;
if (ddi_devid_valid(np->nvp_devid) != DDI_SUCCESS) {
DEVIDERR((CE_CONT,
"find: invalid devid %s\n",
np->nvp_devpath));
continue;
}
if (ddi_devid_compare(devid, np->nvp_devid) == 0) {
DEVID_DEBUG2((CE_CONT,
"find: devid match: %s 0x%x\n",
np->nvp_devpath, np->nvp_flags));
DEVID_LOG_MATCH(("find", devid, np->nvp_devpath));
DEVID_LOG_PATHS((CE_CONT, "%s\n", np->nvp_devpath));
/*
* Check if we have a cached devinfo reference for this
* devid. Place a hold on it to prevent detach
* Otherwise, use the path instead.
* Note: returns with a hold on each dev_info
* node in the list.
*/
dip = NULL;
if (np->nvp_flags & NVP_DEVID_DIP) {
pdip = ddi_get_parent(np->nvp_dip);
if (ndi_devi_tryenter(pdip, &circ)) {
dip = np->nvp_dip;
ndi_hold_devi(dip);
ndi_devi_exit(pdip, circ);
ASSERT(!DEVI_IS_ATTACHING(dip));
ASSERT(!DEVI_IS_DETACHING(dip));
} else {
DEVID_LOG_DETACH((CE_CONT,
"may be detaching: %s\n",
np->nvp_devpath));
}
}
if (dip) {
if (ndevis < retmax) {
retdevis[ndevis++] = dip;
} else {
ndi_rele_devi(dip);
}
maxdevis++;
} else {
if (npaths < retmax)
retpaths[npaths++] = np->nvp_devpath;
maxpaths++;
}
}
}
*retndevis = ndevis;
*retnpaths = npaths;
return (maxdevis > maxpaths ? maxdevis : maxpaths);
}
static void
dr_resume_devices(dev_info_t *start, dr_sr_handle_t *srh)
{
dr_handle_t *handle;
dev_info_t *dip, *next, *last = NULL;
major_t major;
char *bn;
int circ;
major = (major_t)-1;
/* attach in reverse device tree order */
while (last != start) {
dip = start;
next = ddi_get_next_sibling(dip);
while (next != last && dip != srh->sr_failed_dip) {
dip = next;
next = ddi_get_next_sibling(dip);
}
if (dip == srh->sr_failed_dip) {
/* release hold acquired in dr_suspend_devices() */
srh->sr_failed_dip = NULL;
ndi_rele_devi(dip);
} else if (dr_is_real_device(dip) &&
srh->sr_failed_dip == NULL) {
if ((bn = ddi_binding_name(dip)) != NULL) {
major = ddi_name_to_major(bn);
} else {
bn = "<null>";
}
if (!dr_bypass_device(bn) &&
!drmach_verify_sr(dip, 0)) {
char d_name[40], d_alias[40], *d_info;
d_name[0] = 0;
d_info = ddi_get_name_addr(dip);
if (d_info == NULL)
d_info = "<null>";
if (!dr_resolve_devname(dip, d_name,
d_alias)) {
if (d_alias[0] != 0) {
prom_printf("\tresuming "
"%s@%s (aka %s)\n",
d_name, d_info,
d_alias);
} else {
prom_printf("\tresuming "
"%s@%s\n",
d_name, d_info);
}
} else {
prom_printf("\tresuming %s@%s\n",
bn, d_info);
}
if (devi_attach(dip, DDI_RESUME) !=
DDI_SUCCESS) {
/*
* Print a console warning,
* set an e_code of ESBD_RESUME,
* and save the driver major
* number in the e_rsc.
*/
prom_printf("\tFAILED to resume %s@%s",
d_name[0] ? d_name : bn, d_info);
srh->sr_err_idx =
dr_add_int(srh->sr_err_ints,
srh->sr_err_idx, DR_MAX_ERR_INT,
(uint64_t)major);
handle = srh->sr_dr_handlep;
dr_op_err(CE_IGNORE, handle,
ESBD_RESUME, "%s@%s",
d_name[0] ? d_name : bn, d_info);
}
}
}
/* Hold parent busy while walking its children */
ndi_devi_enter(dip, &circ);
dr_resume_devices(ddi_get_child(dip), srh);
ndi_devi_exit(dip, circ);
last = dip;
}
}
/*
* The "dip" argument's parent (if it exists) must be held busy.
*/
static int
dr_suspend_devices(dev_info_t *dip, dr_sr_handle_t *srh)
{
dr_handle_t *handle;
major_t major;
char *dname;
int circ;
/*
* If dip is the root node, it has no siblings and it is
* always held. If dip is not the root node, dr_suspend_devices()
* will be invoked with the parent held busy.
*/
for (; dip != NULL; dip = ddi_get_next_sibling(dip)) {
char d_name[40], d_alias[40], *d_info;
ndi_devi_enter(dip, &circ);
if (dr_suspend_devices(ddi_get_child(dip), srh)) {
ndi_devi_exit(dip, circ);
return (ENXIO);
}
ndi_devi_exit(dip, circ);
if (!dr_is_real_device(dip))
continue;
major = (major_t)-1;
if ((dname = ddi_binding_name(dip)) != NULL)
major = ddi_name_to_major(dname);
if (dr_bypass_device(dname)) {
PR_QR(" bypassed suspend of %s (major# %d)\n", dname,
major);
continue;
}
if (drmach_verify_sr(dip, 1)) {
PR_QR(" bypassed suspend of %s (major# %d)\n", dname,
major);
continue;
}
if ((d_info = ddi_get_name_addr(dip)) == NULL)
d_info = "<null>";
d_name[0] = 0;
if (dr_resolve_devname(dip, d_name, d_alias) == 0) {
if (d_alias[0] != 0) {
prom_printf("\tsuspending %s@%s (aka %s)\n",
d_name, d_info, d_alias);
} else {
prom_printf("\tsuspending %s@%s\n",
d_name, d_info);
}
} else {
prom_printf("\tsuspending %s@%s\n", dname, d_info);
}
if (devi_detach(dip, DDI_SUSPEND) != DDI_SUCCESS) {
prom_printf("\tFAILED to suspend %s@%s\n",
d_name[0] ? d_name : dname, d_info);
srh->sr_err_idx = dr_add_int(srh->sr_err_ints,
srh->sr_err_idx, DR_MAX_ERR_INT,
(uint64_t)major);
ndi_hold_devi(dip);
srh->sr_failed_dip = dip;
handle = srh->sr_dr_handlep;
dr_op_err(CE_IGNORE, handle, ESBD_SUSPEND, "%s@%s",
d_name[0] ? d_name : dname, d_info);
return (DDI_FAILURE);
}
}
return (DDI_SUCCESS);
}
static void
sbdp_resume_devices(dev_info_t *start, sbdp_sr_handle_t *srh)
{
int circ;
dev_info_t *dip, *next, *last = NULL;
char *bn;
sbd_error_t *sep;
sep = &srh->sep;
/* attach in reverse device tree order */
while (last != start) {
dip = start;
next = ddi_get_next_sibling(dip);
while (next != last && dip != SR_FAILED_DIP(srh)) {
dip = next;
next = ddi_get_next_sibling(dip);
}
if (dip == SR_FAILED_DIP(srh)) {
/* Release hold acquired in sbdp_suspend_devices() */
ndi_rele_devi(dip);
SR_FAILED_DIP(srh) = NULL;
} else if (sbdp_is_real_device(dip) &&
SR_FAILED_DIP(srh) == NULL) {
if (DEVI(dip)->devi_binding_name != NULL) {
bn = ddi_binding_name(dip);
}
#ifdef DEBUG
if (!sbdp_bypass_device(bn)) {
#else
{
#endif
char d_name[40], d_alias[40], *d_info;
d_name[0] = 0;
d_info = ddi_get_name_addr(dip);
if (d_info == NULL)
d_info = "<null>";
if (!sbdp_resolve_devname(dip, d_name,
d_alias)) {
if (d_alias[0] != 0) {
SBDP_DBG_QR("\tresuming "
"%s@%s (aka %s)\n",
d_name, d_info,
d_alias);
} else {
SBDP_DBG_QR("\tresuming "
"%s@%s\n",
d_name, d_info);
}
} else {
SBDP_DBG_QR("\tresuming %s@%s\n",
bn, d_info);
}
if (devi_attach(dip, DDI_RESUME) !=
DDI_SUCCESS) {
/*
* Print a console warning,
* set an errno of ESGT_RESUME,
* and save the driver major
* number in the e_str.
*/
(void) sprintf(sbdp_get_err_buf(sep),
"%s@%s",
d_name[0] ? d_name : bn, d_info);
SBDP_DBG_QR("\tFAILED to resume "
"%s\n", sbdp_get_err_buf(sep));
sbdp_set_err(sep,
ESGT_RESUME, NULL);
}
}
}
ndi_devi_enter(dip, &circ);
sbdp_resume_devices(ddi_get_child(dip), srh);
ndi_devi_exit(dip, circ);
last = dip;
}
}
/*
* True if thread is virtually stopped. Similar to CPR_VSTOPPED
* but from DR point of view. These user threads are waiting in
* the kernel. Once they return from kernel, they will process
* the stop signal and stop.
*/
#define SBDP_VSTOPPED(t) \
((t)->t_state == TS_SLEEP && \
(t)->t_wchan != NULL && \
(t)->t_astflag && \
((t)->t_proc_flag & TP_CHKPT))
static int
sbdp_stop_user_threads(sbdp_sr_handle_t *srh)
{
int count;
char cache_psargs[PSARGSZ];
kthread_id_t cache_tp;
uint_t cache_t_state;
int bailout;
sbd_error_t *sep;
kthread_id_t tp;
extern void add_one_utstop();
extern void utstop_timedwait(clock_t);
extern void utstop_init(void);
#define SBDP_UTSTOP_RETRY 4
#define SBDP_UTSTOP_WAIT hz
if (sbdp_skip_user_threads)
return (DDI_SUCCESS);
sep = &srh->sep;
ASSERT(sep);
utstop_init();
/* we need to try a few times to get past fork, etc. */
for (count = 0; count < SBDP_UTSTOP_RETRY; count++) {
/* walk the entire threadlist */
mutex_enter(&pidlock);
for (tp = curthread->t_next; tp != curthread; tp = tp->t_next) {
proc_t *p = ttoproc(tp);
/* handle kernel threads separately */
if (p->p_as == &kas || p->p_stat == SZOMB)
continue;
mutex_enter(&p->p_lock);
thread_lock(tp);
if (tp->t_state == TS_STOPPED) {
/* add another reason to stop this thread */
tp->t_schedflag &= ~TS_RESUME;
} else {
tp->t_proc_flag |= TP_CHKPT;
thread_unlock(tp);
mutex_exit(&p->p_lock);
add_one_utstop();
mutex_enter(&p->p_lock);
thread_lock(tp);
aston(tp);
if (ISWAKEABLE(tp) || ISWAITING(tp)) {
setrun_locked(tp);
}
}
/* grab thread if needed */
if (tp->t_state == TS_ONPROC && tp->t_cpu != CPU)
poke_cpu(tp->t_cpu->cpu_id);
thread_unlock(tp);
mutex_exit(&p->p_lock);
}
mutex_exit(&pidlock);
/* let everything catch up */
utstop_timedwait(count * count * SBDP_UTSTOP_WAIT);
/* now, walk the threadlist again to see if we are done */
mutex_enter(&pidlock);
for (tp = curthread->t_next, bailout = 0;
tp != curthread; tp = tp->t_next) {
proc_t *p = ttoproc(tp);
/* handle kernel threads separately */
if (p->p_as == &kas || p->p_stat == SZOMB)
continue;
/*
* If this thread didn't stop, and we don't allow
* unstopped blocked threads, bail.
*/
thread_lock(tp);
if (!CPR_ISTOPPED(tp) &&
!(sbdp_allow_blocked_threads &&
SBDP_VSTOPPED(tp))) {
/* nope, cache the details for later */
bcopy(p->p_user.u_psargs, cache_psargs,
sizeof (cache_psargs));
cache_tp = tp;
cache_t_state = tp->t_state;
bailout = 1;
}
thread_unlock(tp);
}
mutex_exit(&pidlock);
/* were all the threads stopped? */
if (!bailout)
break;
}
/* were we unable to stop all threads after a few tries? */
if (bailout) {
cmn_err(CE_NOTE, "process: %s id: %p state: %x\n",
cache_psargs, cache_tp, cache_t_state);
(void) sprintf(sbdp_get_err_buf(sep), "%s", cache_psargs);
sbdp_set_err(sep, ESGT_UTHREAD, NULL);
return (ESRCH);
}
return (DDI_SUCCESS);
}
/*
* Setup resource map for the pci bus node based on the "available"
* property and "bus-range" property.
*/
int
pci_resource_setup(dev_info_t *dip)
{
pci_regspec_t *regs;
int rlen, rcount, i;
char bus_type[16] = "(unknown)";
int len;
struct busnum_ctrl ctrl;
int circular_count;
int rval = NDI_SUCCESS;
/*
* If this is a pci bus node then look for "available" property
* to find the available resources on this bus.
*/
len = sizeof (bus_type);
if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF,
DDI_PROP_CANSLEEP | DDI_PROP_DONTPASS, "device_type",
(caddr_t)&bus_type, &len) != DDI_SUCCESS)
return (NDI_FAILURE);
/* it is not a pci/pci-ex bus type */
if ((strcmp(bus_type, "pci") != 0) && (strcmp(bus_type, "pciex") != 0))
return (NDI_FAILURE);
/*
* The pci-hotplug project addresses adding the call
* to pci_resource_setup from pci nexus driver.
* However that project would initially be only for x86,
* so for sparc pcmcia-pci support we still need to call
* pci_resource_setup in pcic driver. Once all pci nexus drivers
* are updated to call pci_resource_setup this portion of the
* code would really become an assert to make sure this
* function is not called for the same dip twice.
*/
{
if (ra_map_exist(dip, NDI_RA_TYPE_MEM) == NDI_SUCCESS) {
return (NDI_FAILURE);
}
}
/*
* Create empty resource maps first.
*
* NOTE: If all the allocated resources are already assigned to
* device(s) in the hot plug slot then "available" property may not
* be present. But, subsequent hot plug operation may unconfigure
* the device in the slot and try to free up it's resources. So,
* at the minimum we should create empty maps here.
*/
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_MEM) == NDI_FAILURE) {
return (NDI_FAILURE);
}
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_IO) == NDI_FAILURE) {
return (NDI_FAILURE);
}
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_BUSNUM) == NDI_FAILURE) {
return (NDI_FAILURE);
}
if (ndi_ra_map_setup(dip, NDI_RA_TYPE_PCI_PREFETCH_MEM) ==
NDI_FAILURE) {
return (NDI_FAILURE);
}
/* read the "available" property if it is available */
if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"available", (caddr_t)®s, &rlen) == DDI_SUCCESS) {
/*
* create the available resource list for both memory and
* io space
*/
rcount = rlen / sizeof (pci_regspec_t);
for (i = 0; i < rcount; i++) {
switch (PCI_REG_ADDR_G(regs[i].pci_phys_hi)) {
case PCI_REG_ADDR_G(PCI_ADDR_MEM32):
(void) ndi_ra_free(dip,
(uint64_t)regs[i].pci_phys_low,
(uint64_t)regs[i].pci_size_low,
(regs[i].pci_phys_hi & PCI_REG_PF_M) ?
NDI_RA_TYPE_PCI_PREFETCH_MEM : NDI_RA_TYPE_MEM,
0);
break;
case PCI_REG_ADDR_G(PCI_ADDR_MEM64):
(void) ndi_ra_free(dip,
((uint64_t)(regs[i].pci_phys_mid) << 32) |
((uint64_t)(regs[i].pci_phys_low)),
((uint64_t)(regs[i].pci_size_hi) << 32) |
((uint64_t)(regs[i].pci_size_low)),
(regs[i].pci_phys_hi & PCI_REG_PF_M) ?
NDI_RA_TYPE_PCI_PREFETCH_MEM : NDI_RA_TYPE_MEM,
0);
break;
case PCI_REG_ADDR_G(PCI_ADDR_IO):
(void) ndi_ra_free(dip,
(uint64_t)regs[i].pci_phys_low,
(uint64_t)regs[i].pci_size_low,
NDI_RA_TYPE_IO,
0);
break;
case PCI_REG_ADDR_G(PCI_ADDR_CONFIG):
break;
default:
cmn_err(CE_WARN,
"pci_resource_setup: bad addr type: %x\n",
PCI_REG_ADDR_G(regs[i].pci_phys_hi));
break;
}
}
kmem_free((caddr_t)regs, rlen);
}
/*
* update resource map for available bus numbers if the node
* has available-bus-range or bus-range property.
*/
len = sizeof (struct bus_range);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
"available-bus-range", (caddr_t)&pci_bus_range, &len) ==
DDI_SUCCESS) {
/*
* Add bus numbers in the range to the free list.
*/
(void) ndi_ra_free(dip, (uint64_t)pci_bus_range.lo,
(uint64_t)pci_bus_range.hi - (uint64_t)pci_bus_range.lo +
1, NDI_RA_TYPE_PCI_BUSNUM, 0);
} else {
/*
* We don't have an available-bus-range property. If, instead,
* we have a bus-range property we add all the bus numbers
* in that range to the free list but we must then scan
* for pci-pci bridges on this bus to find out the if there
* are any of those bus numbers already in use. If so, we can
* reclaim them.
*/
len = sizeof (struct bus_range);
if (ddi_getlongprop_buf(DDI_DEV_T_ANY, dip,
DDI_PROP_DONTPASS, "bus-range", (caddr_t)&pci_bus_range,
&len) == DDI_SUCCESS) {
if (pci_bus_range.lo != pci_bus_range.hi) {
/*
* Add bus numbers other than the secondary
* bus number to the free list.
*/
(void) ndi_ra_free(dip,
(uint64_t)pci_bus_range.lo + 1,
(uint64_t)pci_bus_range.hi -
(uint64_t)pci_bus_range.lo,
NDI_RA_TYPE_PCI_BUSNUM, 0);
/* scan for pci-pci bridges */
ctrl.rv = DDI_SUCCESS;
ctrl.dip = dip;
ctrl.range = &pci_bus_range;
ndi_devi_enter(dip, &circular_count);
ddi_walk_devs(ddi_get_child(dip),
claim_pci_busnum, (void *)&ctrl);
ndi_devi_exit(dip, circular_count);
if (ctrl.rv != DDI_SUCCESS) {
/* failed to create the map */
(void) ndi_ra_map_destroy(dip,
NDI_RA_TYPE_PCI_BUSNUM);
rval = NDI_FAILURE;
}
}
}
}
#ifdef BUSRA_DEBUG
if (busra_debug) {
(void) ra_dump_all(NULL, dip);
}
#endif
return (rval);
}