Esempio n. 1
0
/*
 * Set the MAC address for an XG port
 * Note that the passed-in value must already be in network byte order.
 */
int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter,
			      netxen_ethernet_macaddr_t addr)
{
	int phy = adapter->physical_port;
	u8 temp[4];
	u32 val;

	if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS))
		return -EIO;

	temp[0] = temp[1] = 0;
	switch (phy) {
	case 0:
	    memcpy(temp + 2, addr, 2);
	    val = le32_to_cpu(*(__le32 *)temp);
	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
				&val, 4))
		return -EIO;

	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
	    val = le32_to_cpu(*(__le32 *)temp);
	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
				&val, 4))
		return -EIO;
	    break;

	case 1:
	    memcpy(temp + 2, addr, 2);
	    val = le32_to_cpu(*(__le32 *)temp);
	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_1,
				&val, 4))
		return -EIO;

	    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
	    val = le32_to_cpu(*(__le32 *)temp);
	    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XG1_STATION_ADDR_0_HI,
				&val, 4))
		return -EIO;
	    break;

	default:
	    printk(KERN_ERR "Unknown port %d\n", phy);
	    break;
	}

	return 0;
}
Esempio n. 2
0
/*
 * Set the station MAC address.
 * Note that the passed-in value must already be in network byte order.
 */
int netxen_niu_macaddr_set(struct netxen_port *port,
                           netxen_ethernet_macaddr_t addr)
{
    u8 temp[4];
    u32 val;
    struct netxen_adapter *adapter = port->adapter;
    int phy = port->portnum;
    unsigned char mac_addr[6];
    int i;

    for (i = 0; i < 10; i++) {
        temp[0] = temp[1] = 0;
        memcpy(temp + 2, addr, 2);
        val = le32_to_cpu(*(__le32 *)temp);
        if (netxen_nic_hw_write_wx
                (adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy), &val, 4))
            return -EIO;

        memcpy(temp, ((u8 *) addr) + 2, sizeof(__le32));
        val = le32_to_cpu(*(__le32 *)temp);
        if (netxen_nic_hw_write_wx
                (adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4))
            return -2;

        netxen_niu_macaddr_get(adapter, phy,
                               (netxen_ethernet_macaddr_t *) mac_addr);
        if (memcmp(mac_addr, addr, 6) == 0)
            break;
    }

    if (i == 10) {
        printk(KERN_ERR "%s: cannot set Mac addr for %s\n",
               netxen_nic_driver_name, port->netdev->name);
        printk(KERN_ERR "MAC address set: "
               "%02x:%02x:%02x:%02x:%02x:%02x.\n",
               addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);

        printk(KERN_ERR "MAC address get: "
               "%02x:%02x:%02x:%02x:%02x:%02x.\n",
               mac_addr[0],
               mac_addr[1],
               mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
    }
    return 0;
}
Esempio n. 3
0
/* Set promiscuous mode for a GbE interface */
int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter,
				    netxen_niu_prom_mode_t mode)
{
	__u32 reg;
	u32 port = adapter->physical_port;

	if (port > NETXEN_NIU_MAX_GBE_PORTS)
		return -EINVAL;

	/* save previous contents */
	if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
				  &reg, 4))
		return -EIO;
	if (mode == NETXEN_NIU_PROMISC_MODE) {
		switch (port) {
		case 0:
			netxen_clear_gb_drop_gb0(reg);
			break;
		case 1:
			netxen_clear_gb_drop_gb1(reg);
			break;
		case 2:
			netxen_clear_gb_drop_gb2(reg);
			break;
		case 3:
			netxen_clear_gb_drop_gb3(reg);
			break;
		default:
			return -EIO;
		}
	} else {
		switch (port) {
		case 0:
			netxen_set_gb_drop_gb0(reg);
			break;
		case 1:
			netxen_set_gb_drop_gb1(reg);
			break;
		case 2:
			netxen_set_gb_drop_gb2(reg);
			break;
		case 3:
			netxen_set_gb_drop_gb3(reg);
			break;
		default:
			return -EIO;
		}
	}
	if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
				   &reg, 4))
		return -EIO;
	return 0;
}
Esempio n. 4
0
/*
 * Set the station MAC address.
 * Note that the passed-in value must already be in network byte order.
 */
int netxen_niu_macaddr_set(struct netxen_adapter *adapter,
			   netxen_ethernet_macaddr_t addr)
{
	u8 temp[4];
	u32 val;
	int phy = adapter->physical_port;
	unsigned char mac_addr[6];
	int i;
	DECLARE_MAC_BUF(mac);

	for (i = 0; i < 10; i++) {
		temp[0] = temp[1] = 0;
		memcpy(temp + 2, addr, 2);
		val = le32_to_cpu(*(__le32 *)temp);
		if (netxen_nic_hw_write_wx
		    (adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy), &val, 4))
			return -EIO;

		memcpy(temp, ((u8 *) addr) + 2, sizeof(__le32));
		val = le32_to_cpu(*(__le32 *)temp);
		if (netxen_nic_hw_write_wx
		    (adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy), &val, 4))
			return -2;

		netxen_niu_macaddr_get(adapter,
				       (netxen_ethernet_macaddr_t *) mac_addr);
		if (memcmp(mac_addr, addr, 6) == 0)
			break;
	}

	if (i == 10) {
		printk(KERN_ERR "%s: cannot set Mac addr for %s\n",
		       netxen_nic_driver_name, adapter->netdev->name);
		printk(KERN_ERR "MAC address set: %s.\n",
		       print_mac(mac, addr));
		printk(KERN_ERR "MAC address get: %s.\n",
		       print_mac(mac, mac_addr));
	}
	return 0;
}
Esempio n. 5
0
/*
 * Set the MAC address for an XG port
 * Note that the passed-in value must already be in network byte order.
 */
int netxen_niu_xg_macaddr_set(struct netxen_port *port,
                              netxen_ethernet_macaddr_t addr)
{
    u8 temp[4];
    u32 val;
    struct netxen_adapter *adapter = port->adapter;

    temp[0] = temp[1] = 0;
    memcpy(temp + 2, addr, 2);
    val = le32_to_cpu(*(__le32 *)temp);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
                               &val, 4))
        return -EIO;

    memcpy(&temp, ((u8 *) addr) + 2, sizeof(__le32));
    val = le32_to_cpu(*(__le32 *)temp);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
                               &val, 4))
        return -EIO;

    return 0;
}
Esempio n. 6
0
/* Disable an XG interface */
int netxen_niu_disable_xg_port(struct netxen_adapter *adapter, int port)
{
    __u32 mac_cfg;

    if (port != 0)
        return -EINVAL;

    mac_cfg = 0;
    netxen_xg_soft_reset(mac_cfg);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_CONFIG_0,
                               &mac_cfg, 4))
        return -EIO;
    return 0;
}
Esempio n. 7
0
/* Disable a GbE interface */
int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter, int port)
{
    __u32 mac_cfg0;

    if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
        return -EINVAL;

    mac_cfg0 = 0;
    netxen_gb_soft_reset(mac_cfg0);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
                               &mac_cfg0, 4))
        return -EIO;
    return 0;
}
Esempio n. 8
0
/* Disable an XG interface */
int netxen_niu_disable_xg_port(struct netxen_adapter *adapter)
{
	__u32 mac_cfg;
	u32 port = adapter->physical_port;

	if (port > NETXEN_NIU_MAX_XG_PORTS)
		return -EINVAL;

	mac_cfg = 0;
	if (netxen_nic_hw_write_wx(adapter,
		NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), &mac_cfg, 4))
		return -EIO;
	return 0;
}
Esempio n. 9
0
/*
 * netxen_niu_gbe_phy_read - read a register from the GbE PHY via
 * mii management interface.
 *
 * Note: The MII management interface goes through port 0.
 *	Individual phys are addressed as follows:
 * @param phy  [15:8]  phy id
 * @param reg  [7:0]   register number
 *
 * @returns  0 on success
 *	  -1 on error
 *
 */
int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long phy,
                            long reg, __u32 * readval)
{
    long timeout = 0;
    long result = 0;
    long restore = 0;
    __u32 address;
    __u32 command;
    __u32 status;
    __u32 mac_cfg0;

    if (phy_lock(adapter) != 0) {
        return -1;
    }

    /*
     * MII mgmt all goes through port 0 MAC interface,
     * so it cannot be in reset
     */

    if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
                              &mac_cfg0, 4))
        return -EIO;
    if (netxen_gb_get_soft_reset(mac_cfg0)) {
        __u32 temp;
        temp = 0;
        netxen_gb_tx_reset_pb(temp);
        netxen_gb_rx_reset_pb(temp);
        netxen_gb_tx_reset_mac(temp);
        netxen_gb_rx_reset_mac(temp);
        if (netxen_nic_hw_write_wx(adapter,
                                   NETXEN_NIU_GB_MAC_CONFIG_0(0),
                                   &temp, 4))
            return -EIO;
        restore = 1;
    }

    address = 0;
    netxen_gb_mii_mgmt_reg_addr(address, reg);
    netxen_gb_mii_mgmt_phy_addr(address, phy);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
                               &address, 4))
        return -EIO;
    command = 0;		/* turn off any prior activity */
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
                               &command, 4))
        return -EIO;
    /* send read command */
    netxen_gb_mii_mgmt_set_read_cycle(command);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
                               &command, 4))
        return -EIO;

    status = 0;
    do {
        if (netxen_nic_hw_read_wx(adapter,
                                  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
                                  &status, 4))
            return -EIO;
        timeout++;
    } while ((netxen_get_gb_mii_mgmt_busy(status)
              || netxen_get_gb_mii_mgmt_notvalid(status))
             && (timeout++ < NETXEN_NIU_PHY_WAITMAX));

    if (timeout < NETXEN_NIU_PHY_WAITMAX) {
        if (netxen_nic_hw_read_wx(adapter,
                                  NETXEN_NIU_GB_MII_MGMT_STATUS(0),
                                  readval, 4))
            return -EIO;
        result = 0;
    } else
        result = -1;

    if (restore)
        if (netxen_nic_hw_write_wx(adapter,
                                   NETXEN_NIU_GB_MAC_CONFIG_0(0),
                                   &mac_cfg0, 4))
            return -EIO;
    phy_unlock(adapter);
    return result;
}
Esempio n. 10
0
/* Enable a GbE interface */
int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
                               int port, netxen_niu_gbe_ifmode_t mode)
{
    __u32 mac_cfg0;
    __u32 mac_cfg1;
    __u32 mii_cfg;

    if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
        return -EINVAL;

    mac_cfg0 = 0;
    netxen_gb_soft_reset(mac_cfg0);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
                               &mac_cfg0, 4))
        return -EIO;
    mac_cfg0 = 0;
    netxen_gb_enable_tx(mac_cfg0);
    netxen_gb_enable_rx(mac_cfg0);
    netxen_gb_unset_rx_flowctl(mac_cfg0);
    netxen_gb_tx_reset_pb(mac_cfg0);
    netxen_gb_rx_reset_pb(mac_cfg0);
    netxen_gb_tx_reset_mac(mac_cfg0);
    netxen_gb_rx_reset_mac(mac_cfg0);

    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
                               &mac_cfg0, 4))
        return -EIO;
    mac_cfg1 = 0;
    netxen_gb_set_preamblelen(mac_cfg1, 0xf);
    netxen_gb_set_duplex(mac_cfg1);
    netxen_gb_set_crc_enable(mac_cfg1);
    netxen_gb_set_padshort(mac_cfg1);
    netxen_gb_set_checklength(mac_cfg1);
    netxen_gb_set_hugeframes(mac_cfg1);

    if (mode == NETXEN_NIU_10_100_MB) {
        netxen_gb_set_intfmode(mac_cfg1, 1);
        if (netxen_nic_hw_write_wx(adapter,
                                   NETXEN_NIU_GB_MAC_CONFIG_1(port),
                                   &mac_cfg1, 4))
            return -EIO;

        /* set mii mode */
        netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE +
                                    (port << 3), 0);
        netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE +
                                    (port << 3), 1);

    } else if (mode == NETXEN_NIU_1000_MB) {
        netxen_gb_set_intfmode(mac_cfg1, 2);
        if (netxen_nic_hw_write_wx(adapter,
                                   NETXEN_NIU_GB_MAC_CONFIG_1(port),
                                   &mac_cfg1, 4))
            return -EIO;
        /* set gmii mode */
        netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE +
                                    (port << 3), 0);
        netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE +
                                    (port << 3), 1);
    }
    mii_cfg = 0;
    netxen_gb_set_mii_mgmt_clockselect(mii_cfg, 7);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port),
                               &mii_cfg, 4))
        return -EIO;
    mac_cfg0 = 0;
    netxen_gb_enable_tx(mac_cfg0);
    netxen_gb_enable_rx(mac_cfg0);
    netxen_gb_unset_rx_flowctl(mac_cfg0);
    netxen_gb_unset_tx_flowctl(mac_cfg0);

    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
                               &mac_cfg0, 4))
        return -EIO;
    return 0;
}
Esempio n. 11
0
/*
 * netxen_niu_gbe_phy_write - write a register to the GbE PHY via
 * mii management interface.
 *
 * Note: The MII management interface goes through port 0.
 *	Individual phys are addressed as follows:
 * @param phy      [15:8]  phy id
 * @param reg      [7:0]   register number
 *
 * @returns  0 on success
 *	  -1 on error
 *
 */
int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
                             long phy, long reg, __u32 val)
{
    long timeout = 0;
    long result = 0;
    long restore = 0;
    __u32 address;
    __u32 command;
    __u32 status;
    __u32 mac_cfg0;

    /*
     * MII mgmt all goes through port 0 MAC interface, so it
     * cannot be in reset
     */

    if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
                              &mac_cfg0, 4))
        return -EIO;
    if (netxen_gb_get_soft_reset(mac_cfg0)) {
        __u32 temp;
        temp = 0;
        netxen_gb_tx_reset_pb(temp);
        netxen_gb_rx_reset_pb(temp);
        netxen_gb_tx_reset_mac(temp);
        netxen_gb_rx_reset_mac(temp);

        if (netxen_nic_hw_write_wx(adapter,
                                   NETXEN_NIU_GB_MAC_CONFIG_0(0),
                                   &temp, 4))
            return -EIO;
        restore = 1;
    }

    command = 0;		/* turn off any prior activity */
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
                               &command, 4))
        return -EIO;

    address = 0;
    netxen_gb_mii_mgmt_reg_addr(address, reg);
    netxen_gb_mii_mgmt_phy_addr(address, phy);
    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
                               &address, 4))
        return -EIO;

    if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0),
                               &val, 4))
        return -EIO;

    status = 0;
    do {
        if (netxen_nic_hw_read_wx(adapter,
                                  NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
                                  &status, 4))
            return -EIO;
        timeout++;
    } while ((netxen_get_gb_mii_mgmt_busy(status))
             && (timeout++ < NETXEN_NIU_PHY_WAITMAX));

    if (timeout < NETXEN_NIU_PHY_WAITMAX)
        result = 0;
    else
        result = -EIO;

    /* restore the state of port 0 MAC in case we tampered with it */
    if (restore)
        if (netxen_nic_hw_write_wx(adapter,
                                   NETXEN_NIU_GB_MAC_CONFIG_0(0),
                                   &mac_cfg0, 4))
            return -EIO;

    return result;
}