/*--------------------------------------------------------------------------
* Procedure reorganize_data():
* This procedure reads the input multidimensional array that is organised
* in the order specified by array "X" and breaks it up into chunks of
* dimensions specified in "C".
*
* This is a very slow process, since reading and writing of LARGE files
* may be involved.
*
*-------------------------------------------------------------------------
*/
static void
_ConvertToChunkFile(int n,
int baseSize,
int dim[],
int C[],
int srcfd,
int destfd)
{
int max_chunks[MAXDIM], chunk_no[MAXDIM];
int PX[MAXDIM], dist[MAXDIM];
int csize = 1, i, temp;
for (i = 0; i < n; chunk_no[i++] = 0) {
max_chunks[i] = dim[i]/C[i];
csize *= C[i];
}
csize *= baseSize;
temp = csize + 4;
memmove(a_chunk, &temp, 4);
mda_get_prod(n, dim, PX);
mda_get_offset_values(n, dist, PX, C);
for (i = 0; i < n; dist[i] *= baseSize, i++)
;
do {
read_chunk(chunk_no, C, &(a_chunk[4]), srcfd, n, baseSize, PX, dist);
write_chunk((struct varlena*)a_chunk, destfd);
} while (next_tuple(n, chunk_no, max_chunks) != -1);
}
static struct srv *
next_tuple(void) {
struct srv_prio *pe;
struct srv *se;
uint16_t rnd;
unsigned csum = 0;
unsigned wsum = 0;
pe = ISC_LIST_HEAD(prio_list);
if (pe == NULL)
return (NULL);
for (se = ISC_LIST_HEAD(pe->srv_list);
se != NULL;
se = ISC_LIST_NEXT(se, link))
{
wsum += se->weight;
}
rnd = random() % (wsum + 1);
for (se = ISC_LIST_HEAD(pe->srv_list);
se != NULL;
se = ISC_LIST_NEXT(se, link))
{
csum += se->weight;
if (csum >= rnd) {
ISC_LIST_UNLINK(pe->srv_list, se, link);
break;
}
}
if (se == NULL) {
ISC_LIST_UNLINK(prio_list, pe, link);
free(pe);
return (next_tuple());
}
#ifdef DEBUG
fprintf(stderr, "rnd=%hu -> prio=%hu weight=%hu port=%hu tname=%s\n",
rnd, pe->prio, se->weight, se->port, se->tname);
#endif
return (se);
}
/**
* @brief Advance the row iterator until value changes in terms of the join
* clauses
* @return the end row number, [start_row, end_row) are the rows of the same
* value
* if the end_row == start_row, the subset is empty
*/
size_t MergeJoinExecutor::Advance(LogicalTile *tile, size_t start_row,
bool is_left) {
size_t end_row = start_row + 1;
size_t this_row = start_row;
size_t tuple_count = tile->GetTupleCount();
if (start_row >= tuple_count) return start_row;
while (end_row < tuple_count) {
expression::ContainerTuple<executor::LogicalTile> this_tuple(tile,
this_row);
expression::ContainerTuple<executor::LogicalTile> next_tuple(tile,
end_row);
bool diff = false;
for (auto &clause : *join_clauses_) {
// Go through each join clauses
auto expr = is_left ? clause.left_.get() : clause.right_.get();
peloton::Value this_value =
expr->Evaluate(&this_tuple, &this_tuple, executor_context_);
peloton::Value next_value =
expr->Evaluate(&next_tuple, &next_tuple, executor_context_);
if (this_value.Compare(next_value) != 0) {
diff = true;
break;
}
}
if (diff) {
break;
}
// the two tuples are the same, we advance by 1
this_row = end_row;
end_row++;
}
LOG_TRACE("Advanced %s with subset size %lu ", is_left ? "left" : "right",
end_row - start_row);
return end_row;
}
/*--------------------------------------------------------------------------
* read_chunk
* reads a chunk from the input files into a_chunk, the position of the
* chunk is specified by chunk_no
*--------------------------------------------------------------------------
*/
static void
read_chunk(int chunk_no[],
int C[],
char a_chunk[],
int srcfd,
int n,
int baseSize,
int PX[],
int dist[])
{
int i, j, cp, unit_transfer;
int start_pos, pos[MAXDIM];
int indx[MAXDIM];
int fpOff;
for ( i = start_pos = 0; i < n; i++) {
pos[i] = chunk_no[i] * C[i];
start_pos += pos[i]*PX[i];
}
start_pos *= baseSize;
/* Read a block of dimesion C starting at co-ordinates pos */
unit_transfer = C[n-1] * baseSize;
for (i = 0; i < n; indx[i++] = 0)
;
fpOff = start_pos;
seek_and_read(fpOff, unit_transfer, a_chunk, srcfd, SEEK_SET);
fpOff += unit_transfer;
cp = unit_transfer;
while ((j = next_tuple(n-1, indx, C)) != -1) {
fpOff += dist[j];
seek_and_read(fpOff, unit_transfer, &(a_chunk[cp]), srcfd, SEEK_SET);
cp += unit_transfer;
fpOff += unit_transfer;
}
}
static void
dump_keyblob (tupledesc_t tuples)
{
size_t n;
unsigned int tag;
const void *value;
log_info ("keyblob dump:\n");
tag = KEYBLOB_TAG_BLOBVERSION;
value = find_tuple (tuples, tag, &n);
while (value)
{
log_info (" tag: %-5u len: %-2u value: ", tag, (unsigned int)n);
if (tag == KEYBLOB_TAG_ENCKEY
|| tag == KEYBLOB_TAG_MACKEY)
log_printf ("[confidential]\n");
else if (!n)
log_printf ("[none]\n");
else
log_printhex ("", value, n);
value = next_tuple (tuples, &tag, &n);
}
}
static int simple_config(dev_link_t *link)
{
static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
static int size_table[2] = { 8, 16 };
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
config_info_t config;
int i, j, try;
int s;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
/* If the card is already configured, look up the port and irq */
i = pcmcia_get_configuration_info(handle, &config);
if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
kio_addr_t port = 0;
if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
port = config.BasePort2;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
(config.NumPorts1 == 0x40)) {
port = config.BasePort1 + 0x28;
info->slave = 1;
}
if (info->slave) {
kfree(cfg_mem);
return setup_serial(handle, info, port, config.AssignedIRQ);
}
}
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (s = 0; s < 2; s++) {
for (try = 0; try < 2; try++) {
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
(cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(handle, tuple, parse);
}
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(handle, tuple, parse);
}
found_port:
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link->handle, RequestIO, i);
kfree(cfg_mem);
return -1;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
kfree(cfg_mem);
return -1;
}
kfree(cfg_mem);
return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
/*----------------------------------------------------------------------------
* _ReadChunkArray --
* returns the subarray specified bu the range indices "st" and "endp"
* from the chunked array stored in file "fp"
*---------------------------------------------------------------------------
*/
int
_ReadChunkArray(int st[],
int endp[],
int bsize,
int fp,
char *destfp,
ArrayType *array,
int isDestLO,
bool *isNull)
{
int i,j,jj;
int n, temp, words_read;
int chunk_span[MAXDIM], chunk_off[MAXDIM];
int chunk_st[MAXDIM], chunk_end[MAXDIM];
int block_seek;
int bptr, *C, csize, *dim, *lb;
int range_st[MAXDIM], range_end[MAXDIM],
range[MAXDIM], array_span[MAXDIM];
int PA[MAXDIM], PCHUNK[MAXDIM], PC[MAXDIM];
int to_read;
int cdist[MAXDIM], adist[MAXDIM];
int dist[MAXDIM], temp_seek;
int srcOff; /* Needed since LO don't understand SEEK_CUR*/
char *baseDestFp = (char *)destfp;
CHUNK_INFO *A = (CHUNK_INFO *) ARR_DATA_PTR(array);
n = ARR_NDIM(array);
dim = ARR_DIMS(array);
lb = ARR_LBOUND(array);
C = A->C;
csize = C[n-1];
PC[n-1] = 1;
temp = dim[n - 1]/C[n-1];
for (i = n-2; i >= 0; i--){
PC[i] = PC[i+1] * temp;
temp = dim[i] / C[i];
csize *= C[i];
}
for (i = 0; i < n; st[i] -= lb[i], endp[i] -= lb[i], i++)
;
mda_get_prod(n, C, PCHUNK);
mda_get_range(n, array_span, st, endp);
mda_get_prod(n, array_span, PA);
array2chunk_coord(n, C, st, chunk_st);
array2chunk_coord(n, C, endp, chunk_end);
mda_get_range(n, chunk_span, chunk_st, chunk_end);
mda_get_offset_values(n, dist, PC, chunk_span);
for (i = 0; i < n; i++) {
range_st[i] = st[i];
range_end[i] = min(chunk_st[i]*C[i]+C[i]-1, endp[i]);
}
for (i = j = 0; i < n; i++)
j+= chunk_st[i]*PC[i];
temp_seek = srcOff = j * csize * bsize;
if (lo_lseek(fp, srcOff, SEEK_SET) < 0) RETURN_NULL;
jj = n-1;
for (i = 0; i < n; chunk_off[i++] = 0)
;
words_read = 0; temp_seek = 0;
do {
/* Write chunk (chunk_st) to output buffer */
mda_get_range(n, array_span, range_st, range_end);
mda_get_offset_values(n, adist, PA, array_span);
mda_get_offset_values(n, cdist, PCHUNK, array_span);
for (i=0; i < n; range[i] = range_st[i]-st[i], i++);
bptr = tuple2linear(n, range, PA);
for (i = 0; i < n; range[i++] = 0);
j = n-1; bptr *= bsize;
if (isDestLO) {
if (lo_lseek(destfp, bptr, SEEK_SET) < 0)
RETURN_NULL;
}
else
destfp = baseDestFp + bptr;
for(i = 0, block_seek = 0; i < n; i++)
block_seek += (range_st[i]-(chunk_st[i] + chunk_off[i])
*C[i])*PCHUNK[i];
if (dist[jj] + block_seek + temp_seek) {
temp = (dist[jj]*csize+block_seek+temp_seek)*bsize;
srcOff += temp;
if (lo_lseek(fp, srcOff, SEEK_SET) < 0)
RETURN_NULL;
}
for (i = n-1, to_read = bsize; i >= 0;
to_read *= min(C[i], array_span[i]), i--)
if (cdist[i] || adist[i])
break;
do {
if (cdist[j]) {
srcOff += (cdist[j]*bsize);
if (lo_lseek(fp, srcOff, SEEK_SET) < 0)
RETURN_NULL;
}
block_seek += cdist[j];
bptr += adist[j]*bsize;
if (isDestLO) {
if (lo_lseek(destfp, bptr, SEEK_SET) < 0)
RETURN_NULL;
}
else
destfp = baseDestFp + bptr;
temp = _LOtransfer ((char**)&destfp, to_read, 1, (char**)&fp, 1, isDestLO);
if (temp < to_read)
RETURN_NULL;
srcOff += to_read;
words_read+=to_read;
bptr += to_read;
block_seek += (to_read/bsize);
/*
* compute next tuple in range[]
*/
{
int x;
if (!(i+1))
j = -1;
else {
range[i] = (range[i]+1)%array_span[i];
for (x = i; x*(!range[x]); x--)
range[x-1] = (range[x-1]+1)%array_span[x-1];
if (x)
j = x;
else {
if (range[0])
j = 0;
else
j = -1;
}
}
}
/*
* end of compute next tuple --
* j is set to -1 if tuple generation is over
*/
} while (j != -1);
block_seek = csize - block_seek;
temp_seek = block_seek;
jj = next_tuple(n, chunk_off, chunk_span);
if (jj == -1)
break;
range_st[jj] = (chunk_st[jj]+chunk_off[jj])*C[jj];
range_end[jj] = min(range_st[jj] + C[jj]-1, endp[jj]);
for (i = jj+1; i < n; i++) {
range_st[i] = st[i];
range_end[i] = min((chunk_st[i]+chunk_off[i])*C[i]+C[i]-1, endp[i]);
}
} while (jj != -1);
return(words_read);
}
static int multi_config(dev_link_t *link)
{
client_handle_t handle = link->handle;
serial_info_t *info = link->priv;
tuple_t tuple;
u_char buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i, base2 = 0;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
i = CardServices(RequestIO, link->handle, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS) break;
}
i = next_tuple(handle, &tuple, &parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
i = CardServices(RequestIO, link->handle, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS) break;
}
i = next_tuple(handle, &tuple, &parse);
}
}
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
return -1;
}
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
/* Socket Dual IO: this enables irq's for second port */
if (info->multi && (info->manfid == MANFID_SOCKET)) {
link->conf.Present |= PRESENT_EXT_STATUS;
link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
}
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
return -1;
}
setup_serial(info, link->io.BasePort1, link->irq.AssignedIRQ);
/* The Nokia cards are not really multiport cards */
if (info->manfid == MANFID_NOKIA)
return 0;
for (i = 0; i < info->multi-1; i++)
setup_serial(info, base2+(8*i), link->irq.AssignedIRQ);
return 0;
}
static int btuart_config(struct pcmcia_device *link)
{
static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
btuart_info_t *info = link->priv;
tuple_t tuple;
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i, j, try;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 2; try++) {
i = first_tuple(link, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(link, &tuple, &parse);
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(link, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
&& ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(link, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
BT_ERR("No usable port range found");
cs_error(link, RequestIO, i);
goto failed;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
if (btuart_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev_node = &info->node;
return 0;
failed:
btuart_release(link);
return -ENODEV;
}
/*
gpib_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
*/
static void ines_gpib_config( struct pcmcia_device *link )
{
tuple_t tuple;
cisparse_t parse;
local_info_t *dev;
int i;
u_char buf[64];
win_req_t req;
memreq_t mem;
void *virt;
dev = link->priv;
DEBUG(0, "ines_gpib_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = pcmcia_get_first_tuple(link, &tuple);
if (i != 0) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = pcmcia_get_tuple_data(link, &tuple);
if (i != 0) break;
i = PCMCIA_PARSE_TUPLE(&tuple, &parse);
if (i != 0) break;
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
} while (0);
if (i != 0) {
cs_error(link, ParseTuple, i);
return;
}
/* Configure card */
do {
/*
* try to get manufacturer and card ID
*/
tuple.DesiredTuple = CISTPL_MANFID;
tuple.Attributes = TUPLE_RETURN_COMMON;
if( first_tuple(link,&tuple,&parse) == 0 ) {
dev->manfid = parse.manfid.manf;
dev->cardid = parse.manfid.card;
printk(KERN_DEBUG "ines_cs: manufacturer: 0x%x card: 0x%x\n",
dev->manfid, dev->cardid);
}
/* try to get board information from CIS */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
if( first_tuple(link,&tuple,&parse) == 0 ) {
while(1) {
if( parse.cftable_entry.io.nwin > 0) {
link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
link->io.NumPorts1 = 32;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
i = pcmcia_request_io(link, &link->io);
if (i == 0) {
printk( KERN_DEBUG "ines_cs: base=0x%x len=%d registered\n",
link->io.BasePort1, link->io.NumPorts1 );
link->conf.ConfigIndex = parse.cftable_entry.index;
break;
}
}
if ( next_tuple(link,&tuple,&parse) != 0 ) break;
}
if (i != 0) {
cs_error(link, RequestIO, i);
}
} else {
printk("ines_cs: can't get card information\n");
}
link->conf.Status = CCSR_IOIS8;
/* for the ines card we have to setup the configuration registers in
attribute memory here
*/
req.Attributes=WIN_MEMORY_TYPE_AM | WIN_DATA_WIDTH_8 | WIN_ENABLE;
req.Base=0;
req.Size=0x1000;
req.AccessSpeed=250;
i= pcmcia_request_window(&link, &req, &link->win);
if (i != 0) {
cs_error(link, RequestWindow, i);
break;
}
mem.CardOffset=0;
mem.Page=0;
i= pcmcia_map_mem_page(link->win, &mem);
if (i != 0) {
cs_error(link, MapMemPage, i);
break;
}
virt = ioremap( req.Base, req.Size );
writeb( ( link->io.BasePort1 >> 2 ) & 0xff, virt + 0xf0 ); // IOWindow base
iounmap( ( void* ) virt );
} while (0);
/*
Now allocate an interrupt line.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ)
{
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
cs_error(link, RequestIRQ, i);
}
printk(KERN_DEBUG "ines_cs: IRQ_Line=%d\n",link->irq.AssignedIRQ);
}
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0) {
cs_error(link, RequestConfiguration, i);
}
/* If any step failed, release any partially configured state */
if (i != 0) {
ines_gpib_release(link);
return;
}
printk(KERN_DEBUG "ines gpib device loaded\n");
} /* gpib_config */
int
main(int argc, char **argv) {
char *qname;
ns_msg msg;
int len, rc = 0;
unsigned char answer[NS_MAXMSG];
unsigned rcode;
struct srv *se;
if (argc < 3)
usage();
ISC_LIST_INIT(prio_list);
srandom(time(NULL));
res_init();
qname = argv[1];
len = res_query(qname, ns_c_in, ns_t_srv, answer, sizeof answer);
if (len < 0) {
herror("res_query");
return (EXIT_FAILURE);
}
if (ns_initparse(answer, len, &msg) < 0) {
perror("ns_initparse");
return (EXIT_FAILURE);
}
rcode = ns_msg_getflag(msg, ns_f_rcode);
if (rcode != ns_r_noerror) {
fprintf(stderr, "wrapsrv: query for %s returned rcode %u\n",
qname, rcode);
return (EXIT_FAILURE);
}
if (ns_msg_count(msg, ns_s_an) == 0) {
fprintf(stderr, "wrapsrv: query for %s returned no answers\n",
qname);
return (EXIT_FAILURE);
}
parse_answer_section(&msg);
#ifdef DEBUG
print_tuples();
fprintf(stderr, "\n");
#endif
while ((se = next_tuple()) != NULL) {
if ((rc = do_cmd(se, argc, argv)) == 0)
break;
#ifdef DEBUG
fprintf(stderr, "\n");
#endif
}
free_tuples();
return (rc);
}
static int multi_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
int i, rc, base2 = 0;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(link, tuple, parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(link, tuple, parse);
}
}
if (i != CS_SUCCESS) {
cs_error(link, RequestIO, i);
rc = -1;
goto free_cfg_mem;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
/*
* Apply any configuration quirks.
*/
if (info->quirk && info->quirk->config)
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
rc = -1;
goto free_cfg_mem;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
* 8 registers are for the UART, the others are extra registers.
* Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
*/
if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
info->prodid == PRODID_POSSIO_GCC)) {
int err;
if (cf->index == 1 || cf->index == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
base2 = link->io.BasePort1;
} else {
err = setup_serial(link, info, link->io.BasePort1,
link->irq.AssignedIRQ);
}
info->c950ctrl = base2;
/*
* FIXME: We really should wake up the port prior to
* handing it over to the serial layer.
*/
if (info->quirk && info->quirk->wakeup)
info->quirk->wakeup(link);
rc = 0;
goto free_cfg_mem;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
rc = 0;
free_cfg_mem:
kfree(cfg_mem);
return rc;
}
static int elsa_cs_config(struct pcmcia_device *link)
{
tuple_t tuple;
cisparse_t parse;
local_info_t *dev;
int i, j, last_fn;
u_short buf[128];
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
IsdnCard_t icard;
DEBUG(0, "elsa_config(0x%p)\n", link);
dev = link->priv;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(link, &tuple, &parse);
while (i == CS_SUCCESS) {
if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) break;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
link->conf.ConfigIndex = cf->index;
for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
link->io.BasePort1 = j;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) break;
}
break;
}
i = next_tuple(link, &tuple, &parse);
}
if (i != CS_SUCCESS) {
last_fn = RequestIO;
goto cs_failed;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
link->irq.AssignedIRQ = 0;
last_fn = RequestIRQ;
goto cs_failed;
}
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
last_fn = RequestConfiguration;
goto cs_failed;
}
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. *//* */
sprintf(dev->node.dev_name, "elsa");
dev->node.major = dev->node.minor = 0x0;
link->dev_node = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
if (link->io.NumPorts2)
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
icard.para[0] = link->irq.AssignedIRQ;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
if (i < 0) {
printk(KERN_ERR "elsa_cs: failed to initialize Elsa PCMCIA %d at i/o %#x\n",
i, link->io.BasePort1);
elsa_cs_release(link);
} else
((local_info_t*)link->priv)->cardnr = i;
return 0;
cs_failed:
cs_error(link, last_fn, i);
elsa_cs_release(link);
return -ENODEV;
} /* elsa_cs_config */
static void avma1cs_config(dev_link_t *link)
{
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u8 buf[64];
char devname[128];
int busy = 0;
handle = link->handle;
dev = link->priv;
DEBUG(0, "avma1cs_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = CardServices(GetFirstTuple, handle, &tuple);
if (i != CS_SUCCESS) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = CardServices(GetTupleData, handle, &tuple);
if (i != CS_SUCCESS) break;
i = CardServices(ParseTuple, handle, &tuple, &parse);
if (i != CS_SUCCESS) break;
link->conf.ConfigBase = parse.config.base;
} while (0);
if (i != CS_SUCCESS) {
cs_error(link->handle, ParseTuple, i);
link->state &= ~DEV_CONFIG_PENDING;
return;
}
/* Configure card */
link->state |= DEV_CONFIG;
do {
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 254;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_VERS_1;
devname[0] = 0;
if( !first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 1 ) {
strlcpy(devname,parse.version_1.str + parse.version_1.ofs[1],
sizeof(devname));
}
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(handle, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1 - 1);
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
CardServices(ReleaseIO, link->handle, &link->io);
break;
}
/*
* configure the PCMCIA socket
*/
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
CardServices(ReleaseIO, link->handle, &link->io);
CardServices(ReleaseIRQ, link->handle, &link->irq);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
strcpy(dev->node.dev_name, "A1");
dev->node.major = 45;
dev->node.minor = 0;
link->dev = &dev->node;
link->state &= ~DEV_CONFIG_PENDING;
/* If any step failed, release any partially configured state */
if (i != 0) {
avma1cs_release(link);
return;
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
link->io.BasePort1, link->irq.AssignedIRQ);
if (avm_a1_init_pcmcia((void *)(int)link->io.BasePort1,
link->irq.AssignedIRQ,
&busy, isdnprot) != 0) {
printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
return;
}
i = 0; /* no returncode for cardnr :-( */
dev->node.minor = i;
} /* avma1cs_config */
static int multi_config(dev_link_t * link)
{
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
config_info_t config;
int i, rc, base2 = 0;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
i = pcmcia_get_configuration_info(handle, &config);
if (i != CS_SUCCESS) {
cs_error(handle, GetConfigurationInfo, i);
rc = -1;
goto free_cfg_mem;
}
link->conf.Vcc = config.Vcc;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(handle, tuple, parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(handle, tuple, parse);
}
}
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
rc = -1;
goto free_cfg_mem;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
/* Socket Dual IO: this enables irq's for second port */
if (info->multi && (info->manfid == MANFID_SOCKET)) {
link->conf.Present |= PRESENT_EXT_STATUS;
link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
}
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
rc = -1;
goto free_cfg_mem;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
8 registers are for the UART, the others are extra registers */
if (info->manfid == MANFID_OXSEMI) {
if (cf->index == 1 || cf->index == 3) {
setup_serial(handle, info, base2, link->irq.AssignedIRQ);
outb(12, link->io.BasePort1 + 1);
} else {
setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
outb(12, base2 + 1);
}
rc = 0;
goto free_cfg_mem;
}
setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
/* The Nokia cards are not really multiport cards */
if (info->manfid == MANFID_NOKIA) {
rc = 0;
goto free_cfg_mem;
}
for (i = 0; i < info->multi - 1; i++)
setup_serial(handle, info, base2 + (8 * i),
link->irq.AssignedIRQ);
rc = 0;
free_cfg_mem:
kfree(cfg_mem);
return rc;
}
static void btuart_config(dev_link_t *link)
{
static ioaddr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
client_handle_t handle = link->handle;
btuart_info_t *info = link->priv;
tuple_t tuple;
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, j, try, last_ret, last_fn;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
/* Get configuration register information */
tuple.DesiredTuple = CISTPL_CONFIG;
last_ret = first_tuple(handle, &tuple, &parse);
if (last_ret != CS_SUCCESS) {
last_fn = ParseTuple;
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/* Configure card */
link->state |= DEV_CONFIG;
i = pcmcia_get_configuration_info(handle, &config);
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 2; try++) {
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(handle, &tuple, &parse);
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
&& ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
BT_ERR("No usable port range found");
cs_error(link->handle, RequestIO, i);
goto failed;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
goto failed;
}
if (btuart_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
return;
cs_failed:
cs_error(link->handle, last_fn, last_ret);
failed:
btuart_release(link);
}
static int avma1cs_config(struct pcmcia_device *link)
{
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u_char buf[64];
char devname[128];
IsdnCard_t icard;
int busy = 0;
dev = link->priv;
DEBUG(0, "avma1cs_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = pcmcia_get_first_tuple(link, &tuple);
if (i != CS_SUCCESS) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = pcmcia_get_tuple_data(link, &tuple);
if (i != CS_SUCCESS) break;
i = pcmcia_parse_tuple(link, &tuple, &parse);
if (i != CS_SUCCESS) break;
link->conf.ConfigBase = parse.config.base;
} while (0);
if (i != CS_SUCCESS) {
cs_error(link, ParseTuple, i);
return -ENODEV;
}
do {
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 254;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_VERS_1;
devname[0] = 0;
if( !first_tuple(link, &tuple, &parse) && parse.version_1.ns > 1 ) {
strlcpy(devname,parse.version_1.str + parse.version_1.ofs[1],
sizeof(devname));
}
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(link, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1 - 1);
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(link, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
break;
}
/*
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
strcpy(dev->node.dev_name, "A1");
dev->node.major = 45;
dev->node.minor = 0;
link->dev_node = &dev->node;
/* If any step failed, release any partially configured state */
if (i != 0) {
avma1cs_release(link);
return -ENODEV;
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
link->io.BasePort1, link->irq.AssignedIRQ);
icard.para[0] = link->irq.AssignedIRQ;
icard.para[1] = link->io.BasePort1;
icard.protocol = isdnprot;
icard.typ = ISDN_CTYPE_A1_PCMCIA;
i = hisax_init_pcmcia(link, &busy, &icard);
if (i < 0) {
printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
avma1cs_release(link);
return -ENODEV;
}
dev->node.minor = i;
return 0;
} /* avma1cs_config */
static void elsa_cs_config(dev_link_t *link)
{
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
local_info_t *dev;
int i, j, last_fn;
u_short buf[128];
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
DEBUG(0, "elsa_config(0x%p)\n", link);
handle = link->handle;
dev = link->priv;
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleDataMax = 255;
tuple.TupleOffset = 0;
tuple.Attributes = 0;
i = first_tuple(handle, &tuple, &parse);
if (i != CS_SUCCESS) {
last_fn = ParseTuple;
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/* Configure card */
link->state |= DEV_CONFIG;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(handle, &tuple, &parse);
while (i == CS_SUCCESS) {
if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) break;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
link->conf.ConfigIndex = cf->index;
for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
link->io.BasePort1 = j;
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) break;
}
break;
}
i = next_tuple(handle, &tuple, &parse);
}
if (i != CS_SUCCESS) {
last_fn = RequestIO;
goto cs_failed;
}
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
link->irq.AssignedIRQ = 0;
last_fn = RequestIRQ;
goto cs_failed;
}
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
last_fn = RequestConfiguration;
goto cs_failed;
}
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. *//* */
sprintf(dev->node.dev_name, "elsa");
dev->node.major = dev->node.minor = 0x0;
link->dev = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev->node.dev_name, link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
if (link->io.NumPorts2)
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
link->state &= ~DEV_CONFIG_PENDING;
elsa_init_pcmcia(link->io.BasePort1, link->irq.AssignedIRQ,
&(((local_info_t*)link->priv)->busy),
protocol);
return;
cs_failed:
cs_error(link->handle, last_fn, i);
elsa_cs_release((u_long)link);
} /* elsa_cs_config */
static int avmcs_config(struct pcmcia_device *link)
{
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u_char buf[64];
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
dev = link->priv;
do {
devname[0] = 0;
if (link->prod_id[1])
strlcpy(devname, link->prod_id[1], sizeof(devname));
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(link, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(link, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
break;
}
/*
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
if (devname[0]) {
char *s = strrchr(devname, ' ');
if (!s)
s = devname;
else s++;
strcpy(dev->node.dev_name, s);
if (strcmp("M1", s) == 0) {
cardtype = AVM_CARDTYPE_M1;
} else if (strcmp("M2", s) == 0) {
cardtype = AVM_CARDTYPE_M2;
} else {
cardtype = AVM_CARDTYPE_B1;
}
} else {
strcpy(dev->node.dev_name, "b1");
cardtype = AVM_CARDTYPE_B1;
}
dev->node.major = 64;
dev->node.minor = 0;
link->dev_node = &dev->node;
/* If any step failed, release any partially configured state */
if (i != 0) {
avmcs_release(link);
return -ENODEV;
}
switch (cardtype) {
case AVM_CARDTYPE_M1: addcard = b1pcmcia_addcard_m1; break;
case AVM_CARDTYPE_M2: addcard = b1pcmcia_addcard_m2; break;
default:
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
if ((i = (*addcard)(link->io.BasePort1, link->irq.AssignedIRQ)) < 0) {
printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n",
dev->node.dev_name, link->io.BasePort1, link->irq.AssignedIRQ);
avmcs_release(link);
return -ENODEV;
}
dev->node.minor = i;
return 0;
} /* avmcs_config */
static void avmcs_config(dev_link_t *link)
{
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u_char buf[64];
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
handle = link->handle;
dev = link->priv;
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = pcmcia_get_first_tuple(handle, &tuple);
if (i != CS_SUCCESS) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = pcmcia_get_tuple_data(handle, &tuple);
if (i != CS_SUCCESS) break;
i = pcmcia_parse_tuple(handle, &tuple, &parse);
if (i != CS_SUCCESS) break;
link->conf.ConfigBase = parse.config.base;
} while (0);
if (i != CS_SUCCESS) {
cs_error(link->handle, ParseTuple, i);
link->state &= ~DEV_CONFIG_PENDING;
return;
}
/* Configure card */
link->state |= DEV_CONFIG;
do {
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 254;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_VERS_1;
devname[0] = 0;
if( !first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 1 ) {
strlcpy(devname,parse.version_1.str + parse.version_1.ofs[1],
sizeof(devname));
}
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(handle, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
pcmcia_release_io(link->handle, &link->io);
break;
}
/*
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
pcmcia_release_io(link->handle, &link->io);
pcmcia_release_irq(link->handle, &link->irq);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
if (devname[0]) {
char *s = strrchr(devname, ' ');
if (!s)
s = devname;
else s++;
strcpy(dev->node.dev_name, s);
if (strcmp("M1", s) == 0) {
cardtype = AVM_CARDTYPE_M1;
} else if (strcmp("M2", s) == 0) {
cardtype = AVM_CARDTYPE_M2;
} else {
cardtype = AVM_CARDTYPE_B1;
}
} else {
strcpy(dev->node.dev_name, "b1");
cardtype = AVM_CARDTYPE_B1;
}
dev->node.major = 64;
dev->node.minor = 0;
link->dev = &dev->node;
link->state &= ~DEV_CONFIG_PENDING;
/* If any step failed, release any partially configured state */
if (i != 0) {
avmcs_release(link);
return;
}
switch (cardtype) {
case AVM_CARDTYPE_M1: addcard = b1pcmcia_addcard_m1; break;
case AVM_CARDTYPE_M2: addcard = b1pcmcia_addcard_m2; break;
default:
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
if ((i = (*addcard)(link->io.BasePort1, link->irq.AssignedIRQ)) < 0) {
printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n",
dev->node.dev_name, link->io.BasePort1, link->irq.AssignedIRQ);
avmcs_release(link);
return;
}
dev->node.minor = i;
} /* avmcs_config */
static int simple_config(dev_link_t *link)
{
static ioaddr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
client_handle_t handle = link->handle;
serial_info_t *info = link->priv;
tuple_t tuple;
u_char buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, j, try;
/* If the card is already configured, look up the port and irq */
i = CardServices(GetConfigurationInfo, handle, &config);
if ((i == CS_SUCCESS) &&
(config.Attributes & CONF_VALID_CLIENT)) {
ioaddr_t port = 0;
if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
port = config.BasePort2;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
(config.NumPorts1 == 0x40)) {
port = config.BasePort1 + 0x28;
info->slave = 1;
}
if (info->slave)
return setup_serial(info, port, config.AssignedIRQ);
}
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 2; try++) {
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS) goto next_entry;
if (cf->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
cf->vpp1.param[CISTPL_POWER_VNOM]/10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
next_entry:
i = next_tuple(handle, &tuple, &parse);
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = CardServices(RequestIO, link->handle,
&link->io);
if (i == CS_SUCCESS) goto found_port;
}
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
return -1;
}
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
return -1;
}
return setup_serial(info, link->io.BasePort1, link->irq.AssignedIRQ);
}
