Esempi in C++ (Cpp) per omap3_pm_init_cpuidle

Esempio n. 1

File: board-3430sdp.c Progetto: AdiPat/i9003_Kernel

static void __init omap_3430sdp_init_irq(void)
{
	omap_board_config = sdp3430_config;
	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
	omap_init_irq();
}

Esempio n. 2

File: board-rx51.c Progetto: 0-t/samsung-kernel-msm7x30

static void __init rx51_init_irq(void)
{
	struct omap_sdrc_params *sdrc_params;

	omap_board_config = rx51_config;
	omap_board_config_size = ARRAY_SIZE(rx51_config);
	omap3_pm_init_cpuidle(rx51_cpuidle_params);
	sdrc_params = rx51_get_sdram_timings();
	omap2_init_common_hw(sdrc_params, sdrc_params);
	omap_init_irq();
	omap_gpio_init();
}

Esempio n. 3

File: board-rx51.c Progetto: 303750856/linux-3.1

static void __init rx51_init(void)
{
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	omap_board_config = rx51_config;
	omap_board_config_size = ARRAY_SIZE(rx51_config);
	omap3_pm_init_cpuidle(rx51_cpuidle_params);
	omap_serial_init();
	usb_musb_init(&musb_board_data);
	rx51_peripherals_init();

	/* Ensure SDRC pins are mux'd for self-refresh */
	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);

	platform_device_register(&leds_gpio);
}

Esempio n. 4

File: board-mapphone.c Progetto: Bdaman80/BDA-ACTV

static void __init mapphone_init_irq(void)
{
	if (cpu_is_omap3630()) {
		omap2_init_common_hw(JEDEC_JESD209A_sdrc_params,
			JEDEC_JESD209A_sdrc_params,
			mapphone_omap3630_mpu_rate_table,
			mapphone_omap3630_dsp_rate_table,
			mapphone_omap3630_l3_rate_table);
	} else{
		omap2_init_common_hw(JEDEC_JESD209A_sdrc_params,
			JEDEC_JESD209A_sdrc_params,
			mapphone_omap3430_mpu_rate_table,
			mapphone_omap3430_dsp_rate_table,
			mapphone_omap3430_l3_rate_table);
	}
	omap3_pm_init_cpuidle(mapphone_cpuidle_params_table);
	omap_init_irq();
#ifdef CONFIG_OMAP3_PM
	scm_clk_init();
#endif
	omap_gpio_init();
}

Esempio n. 5

File: board-3430sdp.c Progetto: IngenicC/linux-linaro-natty

static void __init omap_3430sdp_init(void)
{
	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
	omap_board_config = sdp3430_config;
	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
	omap3430_i2c_init();
	omap_display_init(&sdp3430_dss_data);
	if (omap_rev() > OMAP3430_REV_ES1_0)
		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;
	else
		ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1;
	sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
	spi_register_board_info(sdp3430_spi_board_info,
				ARRAY_SIZE(sdp3430_spi_board_info));
	ads7846_dev_init();
	board_serial_init();
	usb_musb_init(&musb_board_data);
	board_smc91x_init();
	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
	sdp3430_display_init();
	enable_board_wakeup_source();
	usbhs_init(&usbhs_bdata);
}