static void omap_pwm_led_power_on(struct omap_pwm_led *led)
{
pr_debug("%s%s: \n", PASS1,__func__);
printk("!!!!!!!!!!%s the brightness is %d \n",__func__, led->brightness);
if (led->powered){
printk("!!!!!!!!!!LED powered, returning \n");
return;
}
led->powered = 1;
/* Select clock */
omap_dm_timer_enable(led->intensity_timer);
omap_dm_timer_set_source(led->intensity_timer, OMAP_TIMER_SRC_SYS_CLK);
omap_dm_timer_set_prescaler(led->intensity_timer, 0);
/* Turn voltage on */
if (led->pdata->set_power != NULL) {
printk("!!!!!!!!!!Turn voltage on \n");
led->pdata->set_power(led->pdata, 1);
}
/* Enable PWM timers */
if (led->blink_timer != NULL) {
printk("!!!!!!!!!!Enable PWM timers \n");
omap_dm_timer_enable(led->blink_timer);
omap_dm_timer_set_source(led->blink_timer,
OMAP_TIMER_SRC_32_KHZ);
omap_pwm_led_set_blink(led);
}
omap_dm_timer_set_load(led->intensity_timer, 1, 0xffffff00);
}
// Initialize the kernel module
static int __init gptimer_test_init(void)
{
int ret = 0;
struct clk *gt_fclk;
uint32_t gt_rate;
printk("gptimer test: starting moudle init\n");
// request a timer (we are asking for ANY open timer, see dmtimer.c for details on how this works)
timer_ptr = omap_dm_timer_request();
if(timer_ptr == NULL){
// oops, no timers available
printk("gptimer test: No more gp timers available, bailing out\n");
return -1;
}
// set the clock source to system clock
omap_dm_timer_set_source(timer_ptr, OMAP_TIMER_SRC_SYS_CLK);
// set prescalar to 1:1
omap_dm_timer_set_prescaler(timer_ptr, 32);
// figure out what IRQ our timer triggers
timer_irq = omap_dm_timer_get_irq(timer_ptr);
// install our IRQ handler for our timer
ret = request_irq(timer_irq, timer_irq_handler, IRQF_DISABLED | IRQF_TIMER , "gptimer test", timer_irq_handler);
if(ret){
printk("gptimer test: request_irq failed (on irq %d), bailing out\n", timer_irq);
return ret;
}
// get clock rate in Hz
gt_fclk = omap_dm_timer_get_fclk(timer_ptr);
gt_rate = clk_get_rate(gt_fclk);
// set preload, and autoreload
// we set it to the clock rate in order to get 1 overflow every second
omap_dm_timer_set_load(timer_ptr, 1, 0xFFFFFFFF - gt_rate);
// setup timer to trigger our IRQ on the overflow event
omap_dm_timer_set_int_enable(timer_ptr, OMAP_TIMER_INT_OVERFLOW);
// start the timer!
omap_dm_timer_start(timer_ptr);
// done!
printk("gptimer test: GP Timer initialized and started (%lu Hz, IRQ %d)\n", (long unsigned)gt_rate, timer_irq);
// return sucsess
return 0;
}
static int __init pwm_start(void) {
int ret = 0;
struct clk *timer_fclk;
uint32_t gt_rate;
printk(KERN_INFO "Loading PWM Module... \n");
// request any timer
timer_ptr = omap_dm_timer_request();
if(timer_ptr == NULL){
// no timers available
printk("pwm module: No more gp timers available, bailing out\n");
return -1;
}
// set the clock source to the system clock
ret = omap_dm_timer_set_source(timer_ptr, OMAP_TIMER_SRC_SYS_CLK);
if(ret) {
printk("pwm module: could not set source\n");
return -1;
}
// set prescalar to 1:1
omap_dm_timer_set_prescaler(timer_ptr, 0);
// figure out what IRQ our timer triggers
timer_irq = omap_dm_timer_get_irq(timer_ptr);
// install our IRQ handler for our timer
ret = request_irq(timer_irq, timer_irq_handler, IRQF_DISABLED | IRQF_TIMER , "pwm", timer_irq_handler);
if(ret){
printk("pwm module: request_irq failed (on irq %d), bailing out\n", timer_irq);
return ret;
}
// get clock rate in Hz and add it to struct
timer_fclk = omap_dm_timer_get_fclk(timer_ptr);
gt_rate = clk_get_rate(timer_fclk);
pwm_data_ptr.timer_rate = gt_rate;
// set preload, and autoreload
// we set it to a default of 1kHz
set_pwm_freq(1000);
// setup timer to trigger IRQ on the overflow
omap_dm_timer_set_int_enable(timer_ptr, OMAP_TIMER_INT_OVERFLOW);
// start the timer
omap_dm_timer_start(timer_ptr);
// done!
printk("pwm module: GP Timer initialized and started (%lu Hz, IRQ %d)\n", (long unsigned)gt_rate, timer_irq);
// setup a GPIO
pwm_setup_pin(38);
pwm_data_ptr.pin = 38;
set_pwm_dutycycle(1,150);
// return success
return 0;
}
