static int am33xx_pm_suspend(void)
{
int state, ret = 0;
struct omap_hwmod *cpgmac_oh, *gpmc_oh, *usb_oh;
cpgmac_oh = omap_hwmod_lookup("cpgmac0");
usb_oh = omap_hwmod_lookup("usb_otg_hs");
gpmc_oh = omap_hwmod_lookup("gpmc");
omap_hwmod_enable(cpgmac_oh);
omap_hwmod_enable(usb_oh);
omap_hwmod_enable(gpmc_oh);
omap_hwmod_idle(cpgmac_oh);
omap_hwmod_idle(usb_oh);
omap_hwmod_idle(gpmc_oh);
if (gfx_l3_clkdm && gfx_l4ls_clkdm) {
clkdm_sleep(gfx_l3_clkdm);
clkdm_sleep(gfx_l4ls_clkdm);
}
/* Try to put GFX to sleep */
if (gfx_pwrdm)
pwrdm_set_next_pwrst(gfx_pwrdm, PWRDM_POWER_OFF);
else
pr_err("Could not program GFX to low power state\n");
writel(0x0, AM33XX_CM_MPU_MPU_CLKCTRL);
ret = cpu_suspend(0, am33xx_do_sram_idle);
writel(0x2, AM33XX_CM_MPU_MPU_CLKCTRL);
if (gfx_pwrdm) {
state = pwrdm_read_pwrst(gfx_pwrdm);
if (state != PWRDM_POWER_OFF)
pr_err("GFX domain did not transition to low power state\n");
else
pr_info("GFX domain entered low power state\n");
}
/* XXX: Why do we need to wakeup the clockdomains? */
if(gfx_l3_clkdm && gfx_l4ls_clkdm) {
clkdm_wakeup(gfx_l3_clkdm);
clkdm_wakeup(gfx_l4ls_clkdm);
}
core_suspend_stat = ret;
return ret;
}
static void omap_clkevt_suspend(struct clock_event_device *unused)
{
if (!clockevent_gpt_hwmod)
return;
omap_hwmod_idle(clockevent_gpt_hwmod);
}
/* Setup free-running counter for clocksource */
static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
{
int ret;
struct device_node *np = NULL;
struct omap_hwmod *oh;
void __iomem *vbase;
const char *oh_name = "counter_32k";
/*
* If device-tree is present, then search the DT blob
* to see if the 32kHz counter is supported.
*/
if (of_have_populated_dt()) {
np = omap_get_timer_dt(omap_counter_match, NULL);
if (!np)
return -ENODEV;
of_property_read_string_index(np, "ti,hwmods", 0, &oh_name);
if (!oh_name)
return -ENODEV;
}
/*
* First check hwmod data is available for sync32k counter
*/
oh = omap_hwmod_lookup(oh_name);
if (!oh || oh->slaves_cnt == 0)
return -ENODEV;
omap_hwmod_setup_one(oh_name);
if (np) {
vbase = of_iomap(np, 0);
of_node_put(np);
} else {
vbase = omap_hwmod_get_mpu_rt_va(oh);
}
if (!vbase) {
pr_warn("%s: failed to get counter_32k resource\n", __func__);
return -ENXIO;
}
ret = omap_hwmod_enable(oh);
if (ret) {
pr_warn("%s: failed to enable counter_32k module (%d)\n",
__func__, ret);
return ret;
}
ret = omap_init_clocksource_32k(vbase);
if (ret) {
pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
__func__, ret);
omap_hwmod_idle(oh);
}
return ret;
}
static int ti_sysc_idle_module(struct device *dev,
const struct ti_sysc_cookie *cookie)
{
if (!cookie->data)
return -EINVAL;
return omap_hwmod_idle(cookie->data);
}
static void espresso10_lcd_set_gptimer_idle(void)
{
struct omap_hwmod *timer10_hwmod;
pr_debug("espresso10_lcd_set_gptimer_idle\n");
timer10_hwmod = omap_hwmod_lookup("timer10");
if (likely(timer10_hwmod))
omap_hwmod_idle(timer10_hwmod);
}
/**
* _omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
* @od: struct omap_device *od
*
* Idle all underlying hwmods. Returns 0.
*/
static int _omap_device_idle_hwmods(struct omap_device *od)
{
int ret = 0;
int i;
for (i = 0; i < od->hwmods_cnt; i++)
ret |= omap_hwmod_idle(od->hwmods[i]);
return ret;
}
static void omap_clkevt_suspend(struct clock_event_device *unused)
{
struct omap_hwmod *oh;
oh = omap_hwmod_lookup(clockevent_gpt.name);
if (!oh)
return;
omap_hwmod_idle(oh);
}
/**
* omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
* @od: struct omap_device *od
*
* Idle all underlying hwmods. Returns 0.
*/
int omap_device_idle_hwmods(struct omap_device *od)
{
int i;
for (i = 0; i < od->hwmods_cnt; i++)
omap_hwmod_idle(od->hwmods[i]);
/* XXX pass along return value here? */
return 0;
}
/**
* omap_device_idle_hwmods - call omap_hwmod_idle() on all hwmods
* @od: struct omap_device *od
*
* Idle all underlying hwmods. Returns 0.
*/
int omap_device_idle_hwmods(struct omap_device *od)
{
struct omap_hwmod *oh;
int i;
for (i = 0, oh = *od->hwmods; i < od->hwmods_cnt; i++, oh++)
omap_hwmod_idle(oh);
/* XXX pass along return value here? */
return 0;
}
static void omap2_gptimer_clksrc_suspend(struct clocksource *unused)
{
struct omap_hwmod *oh;
omap2_gptimer_clksrc_load =
__omap_dm_timer_read_counter(&clksrc, OMAP_TIMER_NONPOSTED);
oh = omap_hwmod_lookup(clocksource_gpt.name);
if (!oh)
return;
omap_hwmod_idle(oh);
}
static void save_secure_all(void)
{
u32 ret;
omap_hwmod_enable(l3_main_3_oh);
ret = omap_secure_dispatcher(secure_hal_save_all_api_index,
FLAG_START_CRITICAL,
1, omap_secure_ram_mempool_base(),
0, 0, 0);
omap_hwmod_idle(l3_main_3_oh);
if (ret != API_HAL_RET_VALUE_OK)
pr_err("Secure all context save failed\n");
}
static int omap2_disable_wdt(struct omap_hwmod *oh, void *unused)
{
void __iomem *base;
int ret;
if (!oh) {
pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
return -EINVAL;
}
base = omap_hwmod_get_mpu_rt_va(oh);
if (!base) {
pr_err("%s: Could not get the base address for %s\n",
oh->name, __func__);
return -EINVAL;
}
/* Enable the clocks before accessing the WDT registers */
ret = omap_hwmod_enable(oh);
if (ret) {
pr_err("%s: Could not enable clocks for %s\n",
oh->name, __func__);
return ret;
}
/* sequence required to disable watchdog */
__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
cpu_relax();
__raw_writel(0x5555, base + OMAP_WDT_SPR);
while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
cpu_relax();
ret = omap_hwmod_idle(oh);
if (ret)
pr_err("%s: Could not disable clocks for %s\n",
oh->name, __func__);
return ret;
}
/* Setup free-running counter for clocksource */
static int __init omap2_sync32k_clocksource_init(void)
{
int ret;
struct omap_hwmod *oh;
void __iomem *vbase;
const char *oh_name = "counter_32k";
/*
* First check hwmod data is available for sync32k counter
*/
oh = omap_hwmod_lookup(oh_name);
if (!oh || oh->slaves_cnt == 0)
return -ENODEV;
omap_hwmod_setup_one(oh_name);
vbase = omap_hwmod_get_mpu_rt_va(oh);
if (!vbase) {
pr_warn("%s: failed to get counter_32k resource\n", __func__);
return -ENXIO;
}
ret = omap_hwmod_enable(oh);
if (ret) {
pr_warn("%s: failed to enable counter_32k module (%d)\n",
__func__, ret);
return ret;
}
ret = omap_init_clocksource_32k(vbase);
if (ret) {
pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
__func__, ret);
omap_hwmod_idle(oh);
}
return ret;
}
static int _omap_mstandby_pm_notifier(struct notifier_block *self,
unsigned long action, void *dev)
{
struct omap_hwmod_list *oh_list_item = NULL;
struct platform_device *pdev;
struct omap_device *od;
switch (action) {
case PM_POST_SUSPEND:
list_for_each_entry(oh_list_item,
omap_hwmod_force_mstandby_list_get(), oh_list) {
pdev = to_platform_device(
omap_device_get_by_hwmod_name(
oh_list_item->oh->name));
od = to_omap_device(pdev);
if (od && od->_driver_status !=
BUS_NOTIFY_BOUND_DRIVER) {
omap_hwmod_enable(oh_list_item->oh);
omap_hwmod_idle(oh_list_item->oh);
}
}
}
static int am33xx_pm_suspend(void)
{
int state, ret = 0;
struct omap_hwmod *gpmc_oh, *usb_oh, *gpio1_oh;
usb_oh = omap_hwmod_lookup("usb_otg_hs");
gpmc_oh = omap_hwmod_lookup("gpmc");
gpio1_oh = omap_hwmod_lookup("gpio1"); /* WKUP domain GPIO */
omap_hwmod_enable(usb_oh);
omap_hwmod_enable(gpmc_oh);
/*
* Keep USB module enabled during standby
* to enable USB remote wakeup
* Note: This will result in hard-coding USB state
* during standby
*/
if (suspend_state != PM_SUSPEND_STANDBY)
omap_hwmod_idle(usb_oh);
omap_hwmod_idle(gpmc_oh);
/*
* Disable the GPIO module. This ensure that
* only sWAKEUP interrupts to Cortex-M3 get generated
*
* XXX: EVM_SK uses a GPIO0 pin for VTP control
* in suspend and hence we can't do this for EVM_SK
* alone. The side-effect of this is that GPIO wakeup
* might have issues. Refer to commit 672639b for the
* details
*/
/*
* Keep GPIO0 module enabled during standby to
* support wakeup via GPIO0 keys.
*/
if ((suspend_cfg_param_list[EVM_ID] != EVM_SK) &&
(suspend_state != PM_SUSPEND_STANDBY))
omap_hwmod_idle(gpio1_oh);
/*
* Update Suspend_State value to be used in sleep33xx.S to keep
* GPIO0 module enabled during standby for EVM-SK
*/
if (suspend_state == PM_SUSPEND_STANDBY)
suspend_cfg_param_list[SUSPEND_STATE] = PM_STANDBY;
else
suspend_cfg_param_list[SUSPEND_STATE] = PM_DS0;
/*
* Keep Touchscreen module enabled during standby
* to enable wakeup from standby.
*/
if (suspend_state == PM_SUSPEND_STANDBY)
writel(0x2, AM33XX_CM_WKUP_ADC_TSC_CLKCTRL);
if (gfx_l3_clkdm && gfx_l4ls_clkdm) {
clkdm_sleep(gfx_l3_clkdm);
clkdm_sleep(gfx_l4ls_clkdm);
}
/* Try to put GFX to sleep */
if (gfx_pwrdm)
pwrdm_set_next_pwrst(gfx_pwrdm, PWRDM_POWER_OFF);
else
pr_err("Could not program GFX to low power state\n");
omap3_intc_suspend();
writel(0x0, AM33XX_CM_MPU_MPU_CLKCTRL);
ret = cpu_suspend(0, am33xx_do_sram_idle);
writel(0x2, AM33XX_CM_MPU_MPU_CLKCTRL);
if (gfx_pwrdm) {
state = pwrdm_read_pwrst(gfx_pwrdm);
if (state != PWRDM_POWER_OFF)
pr_err("GFX domain did not transition to low power state\n");
else
pr_info("GFX domain entered low power state\n");
}
/* XXX: Why do we need to wakeup the clockdomains? */
if(gfx_l3_clkdm && gfx_l4ls_clkdm) {
clkdm_wakeup(gfx_l3_clkdm);
clkdm_wakeup(gfx_l4ls_clkdm);
}
/*
* Touchscreen module was enabled during standby
* Disable it here.
*/
if (suspend_state == PM_SUSPEND_STANDBY)
writel(0x0, AM33XX_CM_WKUP_ADC_TSC_CLKCTRL);
/*
* Put USB module to idle on resume from standby
*/
if (suspend_state == PM_SUSPEND_STANDBY)
omap_hwmod_idle(usb_oh);
ret = am33xx_verify_lp_state(ret);
/*
* Enable the GPIO module. Once the driver is
* fully adapted to runtime PM this will go away
*/
/*
* During standby, GPIO was not disabled. Hence no
* need to enable it here.
*/
if ((suspend_cfg_param_list[EVM_ID] != EVM_SK) &&
(suspend_state != PM_SUSPEND_STANDBY))
omap_hwmod_enable(gpio1_oh);
return ret;
}
static int serial_omap_probe(struct platform_device *pdev)
{
struct uart_omap_port *up = NULL;
struct resource *mem, *irq, *dma_tx, *dma_rx;
struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
struct omap_device *od;
int ret = -ENOSPC;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(&pdev->dev, "no mem resource?\n");
return -ENODEV;
}
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq) {
dev_err(&pdev->dev, "no irq resource?\n");
return -ENODEV;
}
if (!request_mem_region(mem->start, (mem->end - mem->start) + 1,
pdev->dev.driver->name)) {
dev_err(&pdev->dev, "memory region already claimed\n");
return -EBUSY;
}
dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
if (!dma_rx) {
ret = -EINVAL;
goto err;
}
dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
if (!dma_tx) {
ret = -EINVAL;
goto err;
}
up = kzalloc(sizeof(*up), GFP_KERNEL);
if (up == NULL) {
ret = -ENOMEM;
goto do_release_region;
}
sprintf(up->name, "OMAP UART%d", pdev->id);
up->pdev = pdev;
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
up->port.iotype = UPIO_MEM;
up->port.irq = irq->start;
up->port.regshift = 2;
up->port.fifosize = 64;
up->port.ops = &serial_omap_pops;
up->port.line = pdev->id;
up->port.mapbase = mem->start;
up->port.membase = ioremap(mem->start, mem->end - mem->start);
if (!up->port.membase) {
dev_err(&pdev->dev, "can't ioremap UART\n");
ret = -ENOMEM;
goto err1;
}
up->port.flags = omap_up_info->flags;
up->port.uartclk = omap_up_info->uartclk;
up->uart_dma.uart_base = mem->start;
up->errata = omap_up_info->errata;
up->enable_wakeup = omap_up_info->enable_wakeup;
up->wer = omap_up_info->wer;
up->chk_wakeup = omap_up_info->chk_wakeup;
up->wake_peer = omap_up_info->wake_peer;
up->rts_mux_driver_control = omap_up_info->rts_mux_driver_control;
up->rts_pullup_in_suspend = 0;
up->wer_restore = 0;
if (omap_up_info->use_dma) {
up->uart_dma.uart_dma_tx = dma_tx->start;
up->uart_dma.uart_dma_rx = dma_rx->start;
up->use_dma = 1;
up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size;
up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout;
up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate;
spin_lock_init(&(up->uart_dma.tx_lock));
spin_lock_init(&(up->uart_dma.rx_lock));
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
omap_up_info->auto_sus_timeout);
if (device_may_wakeup(&pdev->dev))
pm_runtime_enable(&pdev->dev);
pm_runtime_irq_safe(&pdev->dev);
if (omap_up_info->console_uart) {
od = to_omap_device(up->pdev);
omap_hwmod_idle(od->hwmods[0]);
serial_omap_port_enable(up);
serial_omap_port_disable(up);
}
ui[pdev->id] = up;
serial_omap_add_console_port(up);
ret = uart_add_one_port(&serial_omap_reg, &up->port);
if (ret != 0)
goto err1;
dev_set_drvdata(&pdev->dev, up);
platform_set_drvdata(pdev, up);
return 0;
err:
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
pdev->id, __func__, ret);
err1:
kfree(up);
do_release_region:
release_mem_region(mem->start, (mem->end - mem->start) + 1);
return ret;
}
static int uart_idle_hwmod(struct omap_device *od)
{
omap_hwmod_idle(od->hwmods[0]);
return 0;
}
