/*
* Prepare controller for a transaction and call omap_i2c_xfer_msg
* to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int r;
/*
* hwspinlock is used to time share the I2C module between A9 and Ducati
* on OMAP4. To avoid spurious IRQ due to I2C transaction initiated on
* Ducati sub system I2C IRQ is enabled and disabled on i2c transfers.
*/
omap_i2c_hwspinlock_lock(dev);
omap_i2c_unidle(dev);
enable_irq(dev->irq);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
goto out;
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
if (r != 0)
break;
}
if (r == 0)
r = num;
out:
disable_irq_nosync(dev->irq);
omap_i2c_idle(dev);
omap_i2c_hwspinlock_unlock(dev);
return r;
}
/*
* Prepare controller for a transaction and call omap_i2c_xfer_msg
* to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int r;
struct platform_device *pdev;
struct omap_i2c_bus_platform_data *pdata;
pdev = container_of(dev->dev, struct platform_device, dev);
pdata = pdev->dev.platform_data;
/*
* hwspinlock is used to time share the I2C module between A9 and Ducati
* on OMAP4. To avoid spurious IRQ due to I2C transaction initiated on
* Ducati sub system I2C IRQ is enabled and disabled on i2c transfers.
*/
omap_i2c_hwspinlock_lock(dev);
spin_lock(&dev->dpll_lock);
if (dev->dpll_entry == 1) {
dev->dpll_entry = 0;
/*
* FIXME: Speed > 1000 can not be supported
* in DPLL cascading mode.
*/
if (dev->speed > 1000)
return -1;
omap_i2c_dpll_configure(dev, pdata, OMAP_I2C_DPLL_CLOCK / 1000);
} else if (dev->dpll_exit == 1) {
dev->dpll_exit = 0;
omap_i2c_dpll_configure(dev, pdata, dev->i2c_fclk_rate);
}
spin_unlock(&dev->dpll_lock);
omap_i2c_unidle(dev);
enable_irq(dev->irq);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
goto out;
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
if (r != 0)
break;
}
if (r == 0)
r = num;
out:
disable_irq_nosync(dev->irq);
omap_i2c_idle(dev);
omap_i2c_hwspinlock_unlock(dev);
return r;
}
/*
* Prepare controller for a transaction and call omap_i2c_xfer_msg
* to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int r;
if (dev == NULL)
return -EINVAL;
if (dev->shutdown)
return -EPERM;
r = omap_i2c_hwspinlock_lock(dev);
/* To-Do: if we are unable to acquire the lock, we must
try to recover somehow */
if (r != 0)
return r;
/* We have the bus, enable IRQ */
omap_i2c_unidle(dev);
enable_irq(dev->irq);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
r = omap_i2c_bus_clear(dev);
if (r < 0)
goto out;
/*
* When waiting for completion of a i2c transfer, we need to
* set a wake up latency constraint for the MPU. This is to
* ensure quick enough wakeup from idle, when transfer
* completes.
*/
if (dev->pm_qos)
pm_qos_update_request(dev->pm_qos, dev->latency);
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
if (r != 0)
break;
}
if (dev->pm_qos)
pm_qos_update_request(dev->pm_qos, PM_QOS_DEFAULT_VALUE);
if (r == 0)
r = num;
omap_i2c_wait_for_bb(dev);
out:
disable_irq(dev->irq);
omap_i2c_idle(dev);
omap_i2c_hwspinlock_unlock(dev);
return r;
}
/*
* Prepare controller for a transaction and call omap_i2c_xfer_msg
* to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int r;
//--[[ LGE_UBIQUIX_MODIFIED_START : [email protected] [2011.11.16] - In case a peripheral is holding the DATA bus low, reset the I2C controller
u16 val;
//--]] LGE_UBIQUIX_MODIFIED_END : [email protected] [2011.11.16]- In case a peripheral is holding the DATA bus low, reset the I2C controller
/*
* hwspinlock is used to time share the I2C module between A9 and Ducati
* on OMAP4. To avoid spurious IRQ due to I2C transaction initiated on
* Ducati sub system I2C IRQ is enabled and disabled on i2c transfers.
*/
omap_i2c_hwspinlock_lock(dev);
omap_i2c_unidle(dev);
enable_irq(dev->irq);
r = omap_i2c_wait_for_bb(dev);
//--[[ LGE_UBIQUIX_MODIFIED_START : [email protected] [2011.11.16] - In case a peripheral is holding the DATA bus low, reset the I2C controller
/* If timeout, try to again check after soft reset of I2C block */
if (WARN_ON(r == -ETIMEDOUT)) {
/* Provide a permanent clock to recover the peripheral */
val = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
val |= (OMAP_I2C_SYSTEST_ST_EN |
OMAP_I2C_SYSTEST_FREE |
(2 << OMAP_I2C_SYSTEST_TMODE_SHIFT));
omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, val);
msleep(1);
omap_i2c_init(dev);
r = omap_i2c_wait_for_bb(dev);
}
//--]] LGE_UBIQUIX_MODIFIED_END : [email protected] [2011.11.16]- In case a peripheral is holding the DATA bus low, reset the I2C controller
if (r < 0)
goto out;
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
if (r != 0)
break;
}
if (r == 0)
r = num;
omap_i2c_wait_for_bb(dev);
out:
disable_irq_nosync(dev->irq);
omap_i2c_idle(dev);
omap_i2c_hwspinlock_unlock(dev);
return r;
}
/*
* Prepare controller for a transaction and call omap_i2c_xfer_msg
* to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int r;
#ifdef CONFIG_OMAP4_DPLL_CASCADING
struct platform_device *pdev;
struct omap_i2c_bus_platform_data *pdata;
#endif
if (dev == NULL)
return -EINVAL;
#ifdef CONFIG_OMAP4_DPLL_CASCADING
pdev = container_of(dev->dev, struct platform_device, dev);
pdata = pdev->dev.platform_data;
#endif
if (dev->shutdown)
return -EPERM;
r = omap_i2c_hwspinlock_lock(dev);
/* To-Do: if we are unable to acquire the lock, we must
try to recover somehow */
if (r != 0)
return r;
dev->got_lock = true;
r = omap_i2c_unidle(dev);
if ((r < 0) && (r != -ETIMEDOUT))
goto out_unlock;
/* We have the bus, enable IRQ */
enable_irq(dev->irq);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
r = omap_i2c_bus_clear(dev);
if (r < 0)
goto out;
/*
* When waiting for completion of a i2c transfer, we need to
* set a wake up latency constraint for the MPU. This is to
* ensure quick enough wakeup from idle, when transfer
* completes.
*/
if (dev->pm_qos)
pm_qos_update_request(dev->pm_qos, dev->latency);
#ifdef CONFIG_OMAP4_DPLL_CASCADING
spin_lock(&dev->dpll_lock);
if (dev->dpll_entry == 1) {
dev->dpll_entry = 0;
/*
* FIXME: Speed > 1000 can not be supported
* in DPLL cascading mode.
*/
if (dev->speed > 1000) {
spin_unlock(&dev->dpll_lock);
return -1;
}
omap_i2c_dpll_configure(dev, pdata, OMAP_I2C_DPLL_CLOCK / 1000);
} else if (dev->dpll_exit == 1) {
dev->dpll_exit = 0;
omap_i2c_dpll_configure(dev, pdata, dev->i2c_fclk_rate);
}
spin_unlock(&dev->dpll_lock);
#endif
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
if (r != 0)
break;
}
if (dev->pm_qos)
pm_qos_update_request(dev->pm_qos, PM_QOS_DEFAULT_VALUE);
if (r == 0)
r = num;
omap_i2c_wait_for_bb(dev);
out:
disable_irq(dev->irq);
omap_i2c_idle(dev);
out_unlock:
omap_i2c_hwspinlock_unlock(dev);
return r;
}
/*
* Prepare controller for a transaction and call omap_i2c_xfer_msg
* to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int r;
u16 val;
if (dev == NULL)
return -EINVAL;
r = omap_i2c_hwspinlock_lock(dev);
/* To-Do: if we are unable to acquire the lock, we must
try to recover somehow */
if (r != 0)
return r;
omap_i2c_unidle(dev);
r = omap_i2c_wait_for_bb(dev);
/* If timeout, try to again check after soft reset of I2C block */
if (WARN_ON(r == -ETIMEDOUT)) {
/* Provide a permanent clock to recover the peripheral */
val = omap_i2c_read_reg(dev, OMAP_I2C_SYSTEST_REG);
val |= (OMAP_I2C_SYSTEST_ST_EN |
OMAP_I2C_SYSTEST_FREE |
(2 << OMAP_I2C_SYSTEST_TMODE_SHIFT));
omap_i2c_write_reg(dev, OMAP_I2C_SYSTEST_REG, val);
msleep(1);
omap_i2c_init(dev);
r = omap_i2c_wait_for_bb(dev);
}
if (r < 0)
goto out;
/*
* When waiting for completion of a i2c transfer, we need to
* set a wake up latency constraint for the MPU. This is to
* ensure quick enough wakeup from idle, when transfer
* completes.
*/
if (dev->pm_qos)
pm_qos_update_request(dev->pm_qos, dev->latency);
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
if (r != 0)
break;
}
if (dev->pm_qos)
pm_qos_update_request(dev->pm_qos, PM_QOS_DEFAULT_VALUE);
if (r == 0)
r = num;
omap_i2c_wait_for_bb(dev);
out:
omap_i2c_idle(dev);
omap_i2c_hwspinlock_unlock(dev);
return r;
}
/*
* Prepare controller for a transaction and call omap_i2c_xfer_msg
* to do the work during IRQ processing.
*/
static int
omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
int i;
int r;
/* Sanity check */
if (!dev) {
dev_err(&adap->dev, "%s: invalid omap_i2c_dev\n", __func__);
return -EINVAL;
}
if (dev->suspended) {
WARN(true, "%s: Access denied - device already suspended\n",
dev_name(dev->dev));
return -EACCES;
}
r = omap_i2c_hwspinlock_lock(dev);
/* To-Do: if we are unable to acquire the lock, we must
try to recover somehow */
if (r != 0)
return r;
r = pm_runtime_get_sync(dev->dev);
if (r < 0) {
goto err_pm;
}
/* We have the bus, enable IRQ */
enable_irq(dev->irq);
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
r = omap_i2c_bus_clear(dev);
if (r < 0)
goto out;
/*
* When waiting for completion of a i2c transfer, we need to
* set a wake up latency constraint for the MPU. This is to
* ensure quick enough wakeup from idle, when transfer
* completes.
*/
if (dev->latency)
pm_qos_update_request(&dev->pm_qos_request, dev->latency);
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
if (r != 0)
break;
}
if (dev->latency)
pm_qos_update_request(&dev->pm_qos_request,
PM_QOS_DEFAULT_VALUE);
if (r == 0)
r = num;
omap_i2c_wait_for_bb(dev);
out:
disable_irq(dev->irq);
err_pm:
pm_runtime_put_sync(dev->dev);
omap_i2c_hwspinlock_unlock(dev);
return r;
}
