static int rte_init(void)
{
int ret;
char *error = NULL;
char *contact_path, *jobfam_dir;
orte_job_t *jdata;
orte_node_t *node;
orte_proc_t *proc;
orte_app_context_t *app;
char **aliases, *aptr;
/* run the prolog */
if (ORTE_SUCCESS != (ret = orte_ess_base_std_prolog())) {
error = "orte_ess_base_std_prolog";
goto error;
}
/* setup callback for SIGPIPE */
setup_sighandler(SIGPIPE, &epipe_handler, epipe_signal_callback);
/** setup callbacks for abort signals - from this point
* forward, we need to abort in a manner that allows us
* to cleanup. However, we cannot directly use libevent
* to trap these signals as otherwise we cannot respond
* to them if we are stuck in an event! So instead use
* the basic POSIX trap functions to handle the signal,
* and then let that signal handler do some magic to
* avoid the hang
*
* NOTE: posix traps don't allow us to do anything major
* in them, so use a pipe tied to a libevent event to
* reach a "safe" place where the termination event can
* be created
*/
pipe(term_pipe);
/* setup an event to attempt normal termination on signal */
opal_event_set(orte_event_base, &term_handler, term_pipe[0], OPAL_EV_READ, clean_abort, NULL);
opal_event_set_priority(&term_handler, ORTE_ERROR_PRI);
opal_event_add(&term_handler, NULL);
/* Set both ends of this pipe to be close-on-exec so that no
children inherit it */
if (opal_fd_set_cloexec(term_pipe[0]) != OPAL_SUCCESS ||
opal_fd_set_cloexec(term_pipe[1]) != OPAL_SUCCESS) {
error = "unable to set the pipe to CLOEXEC";
goto error;
}
/* point the signal trap to a function that will activate that event */
signal(SIGTERM, abort_signal_callback);
signal(SIGINT, abort_signal_callback);
signal(SIGHUP, abort_signal_callback);
/** setup callbacks for signals we should foward */
setup_sighandler(SIGUSR1, &sigusr1_handler, signal_forward_callback);
setup_sighandler(SIGUSR2, &sigusr2_handler, signal_forward_callback);
setup_sighandler(SIGTSTP, &sigtstp_handler, signal_forward_callback);
setup_sighandler(SIGCONT, &sigcont_handler, signal_forward_callback);
signals_set = true;
#if OPAL_HAVE_HWLOC
{
hwloc_obj_t obj;
unsigned i, j;
/* get the local topology */
if (NULL == opal_hwloc_topology) {
if (OPAL_SUCCESS != opal_hwloc_base_get_topology()) {
error = "topology discovery";
goto error;
}
}
/* remove the hostname from the topology. Unfortunately, hwloc
* decided to add the source hostname to the "topology", thus
* rendering it unusable as a pure topological description. So
* we remove that information here.
*/
obj = hwloc_get_root_obj(opal_hwloc_topology);
for (i=0; i < obj->infos_count; i++) {
if (NULL == obj->infos[i].name ||
NULL == obj->infos[i].value) {
continue;
}
if (0 == strncmp(obj->infos[i].name, "HostName", strlen("HostName"))) {
free(obj->infos[i].name);
free(obj->infos[i].value);
/* left justify the array */
for (j=i; j < obj->infos_count-1; j++) {
obj->infos[j] = obj->infos[j+1];
}
obj->infos[obj->infos_count-1].name = NULL;
obj->infos[obj->infos_count-1].value = NULL;
obj->infos_count--;
break;
}
}
if (4 < opal_output_get_verbosity(orte_ess_base_framework.framework_output)) {
opal_output(0, "%s Topology Info:", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
opal_dss.dump(0, opal_hwloc_topology, OPAL_HWLOC_TOPO);
}
}
#endif
/* if we are using xml for output, put an mpirun start tag */
if (orte_xml_output) {
fprintf(orte_xml_fp, "<mpirun>\n");
fflush(orte_xml_fp);
}
/* open and setup the opal_pstat framework so we can provide
* process stats if requested
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_pstat_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "opal_pstat_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_pstat_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_pstat_base_select";
goto error;
}
/* open and setup the state machine */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_state_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_state_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_state_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_state_base_select";
goto error;
}
/* open the errmgr */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_errmgr_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_errmgr_base_open";
goto error;
}
/* Since we are the HNP, then responsibility for
* defining the name falls to the PLM component for our
* respective environment - hence, we have to open the PLM
* first and select that component.
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_plm_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_plm_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_base_select";
goto error;
}
/* if we were spawned by a singleton, our jobid was given to us */
if (NULL != orte_ess_base_jobid) {
if (ORTE_SUCCESS != (ret = orte_util_convert_string_to_jobid(&ORTE_PROC_MY_NAME->jobid, orte_ess_base_jobid))) {
ORTE_ERROR_LOG(ret);
error = "convert_string_to_jobid";
goto error;
}
ORTE_PROC_MY_NAME->vpid = 0;
} else {
if (ORTE_SUCCESS != (ret = orte_plm.set_hnp_name())) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_set_hnp_name";
goto error;
}
}
/* Setup the communication infrastructure */
/*
* OOB Layer
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_oob_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_oob_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_oob_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_oob_base_select";
goto error;
}
/*
* Runtime Messaging Layer
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rml_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rml_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_select";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_errmgr_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_errmgr_base_select";
goto error;
}
/* setup the global job and node arrays */
orte_job_data = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_job_data,
1,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
1))) {
ORTE_ERROR_LOG(ret);
error = "setup job array";
goto error;
}
orte_node_pool = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_pool,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node array";
goto error;
}
orte_node_topologies = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_topologies,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node topologies array";
goto error;
}
/* init the nidmap - just so we register that verbosity */
orte_util_nidmap_init(NULL);
/* Setup the job data object for the daemons */
/* create and store the job data object */
jdata = OBJ_NEW(orte_job_t);
jdata->jobid = ORTE_PROC_MY_NAME->jobid;
opal_pointer_array_set_item(orte_job_data, 0, jdata);
/* mark that the daemons have reported as we are the
* only ones in the system right now, and we definitely
* are running!
*/
jdata->state = ORTE_JOB_STATE_DAEMONS_REPORTED;
/* every job requires at least one app */
app = OBJ_NEW(orte_app_context_t);
opal_pointer_array_set_item(jdata->apps, 0, app);
jdata->num_apps++;
/* create and store a node object where we are */
node = OBJ_NEW(orte_node_t);
node->name = strdup(orte_process_info.nodename);
node->index = opal_pointer_array_set_item(orte_node_pool, 0, node);
#if OPAL_HAVE_HWLOC
/* add it to the array of known topologies */
opal_pointer_array_add(orte_node_topologies, opal_hwloc_topology);
#endif
/* create and store a proc object for us */
proc = OBJ_NEW(orte_proc_t);
proc->name.jobid = ORTE_PROC_MY_NAME->jobid;
proc->name.vpid = ORTE_PROC_MY_NAME->vpid;
proc->pid = orte_process_info.pid;
proc->rml_uri = orte_rml.get_contact_info();
proc->state = ORTE_PROC_STATE_RUNNING;
OBJ_RETAIN(node); /* keep accounting straight */
proc->node = node;
opal_pointer_array_set_item(jdata->procs, proc->name.vpid, proc);
/* record that the daemon (i.e., us) is on this node
* NOTE: we do not add the proc object to the node's
* proc array because we are not an application proc.
* Instead, we record it in the daemon field of the
* node object
*/
OBJ_RETAIN(proc); /* keep accounting straight */
node->daemon = proc;
ORTE_FLAG_SET(node, ORTE_NODE_FLAG_DAEMON_LAUNCHED);
node->state = ORTE_NODE_STATE_UP;
/* if we are to retain aliases, get ours */
if (orte_retain_aliases) {
aliases = NULL;
opal_ifgetaliases(&aliases);
/* add our own local name to it */
opal_argv_append_nosize(&aliases, orte_process_info.nodename);
aptr = opal_argv_join(aliases, ',');
opal_argv_free(aliases);
orte_set_attribute(&node->attributes, ORTE_NODE_ALIAS, ORTE_ATTR_LOCAL, aptr, OPAL_STRING);
free(aptr);
}
/* record that the daemon job is running */
jdata->num_procs = 1;
jdata->state = ORTE_JOB_STATE_RUNNING;
/* obviously, we have "reported" */
jdata->num_reported = 1;
/*
* Routed system
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_routed_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_routed_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_routed_base_select";
goto error;
}
/* datastore - ensure we don't pickup the pmi component, but
* don't override anything set by user
*/
if (NULL == getenv("OMPI_MCA_dstore")) {
putenv("OMPI_MCA_dstore=^pmi");
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_dstore_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_dstore_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_select";
goto error;
}
/* create the handles */
if (0 > (opal_dstore_peer = opal_dstore.open("PEER"))) {
error = "opal dstore global";
ret = ORTE_ERR_FATAL;
goto error;
}
if (0 > (opal_dstore_internal = opal_dstore.open("INTERNAL"))) {
error = "opal dstore internal";
ret = ORTE_ERR_FATAL;
goto error;
}
if (0 > (opal_dstore_nonpeer = opal_dstore.open("NONPEER"))) {
error = "opal dstore nonpeer";
ret = ORTE_ERR_FATAL;
goto error;
}
/*
* Group communications
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_grpcomm_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_grpcomm_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_select";
goto error;
}
/* Now provide a chance for the PLM
* to perform any module-specific init functions. This
* needs to occur AFTER the communications are setup
* as it may involve starting a non-blocking recv
*/
if (ORTE_SUCCESS != (ret = orte_plm.init())) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_init";
goto error;
}
/*
* Setup the remaining resource
* management and errmgr frameworks - application procs
* and daemons do not open these frameworks as they only use
* the hnp proxy support in the PLM framework.
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_ras_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_ras_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_ras_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_ras_base_find_available";
goto error;
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rmaps_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rmaps_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rmaps_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rmaps_base_find_available";
goto error;
}
#if OPAL_HAVE_HWLOC
{
char *coprocessors, **sns;
uint32_t h;
int idx;
/* if a topology file was given, then the rmaps framework open
* will have reset our topology. Ensure we always get the right
* one by setting our node topology afterwards
*/
node->topology = opal_hwloc_topology;
/* init the hash table, if necessary */
if (NULL == orte_coprocessors) {
orte_coprocessors = OBJ_NEW(opal_hash_table_t);
opal_hash_table_init(orte_coprocessors, orte_process_info.num_procs);
}
/* detect and add any coprocessors */
coprocessors = opal_hwloc_base_find_coprocessors(opal_hwloc_topology);
if (NULL != coprocessors) {
/* separate the serial numbers of the coprocessors
* on this host
*/
sns = opal_argv_split(coprocessors, ',');
for (idx=0; NULL != sns[idx]; idx++) {
/* compute the hash */
OPAL_HASH_STR(sns[idx], h);
/* mark that this coprocessor is hosted by this node */
opal_hash_table_set_value_uint32(orte_coprocessors, h, (void*)&(ORTE_PROC_MY_NAME->vpid));
}
opal_argv_free(sns);
free(coprocessors);
orte_coprocessors_detected = true;
}
/* see if I am on a coprocessor */
coprocessors = opal_hwloc_base_check_on_coprocessor();
if (NULL != coprocessors) {
orte_set_attribute(&node->attributes, ORTE_NODE_SERIAL_NUMBER, ORTE_ATTR_LOCAL, coprocessors, OPAL_STRING);
free(coprocessors);
orte_coprocessors_detected = true;
}
}
#endif
/* Open/select the odls */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_odls_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_odls_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_select";
goto error;
}
/* Open/select the rtc */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rtc_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_rtc_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rtc_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_rtc_base_select";
goto error;
}
/* enable communication with the rml */
if (ORTE_SUCCESS != (ret = orte_rml.enable_comm())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml.enable_comm";
goto error;
}
/* we are an hnp, so update the contact info field for later use */
orte_process_info.my_hnp_uri = orte_rml.get_contact_info();
proc->rml_uri = strdup(orte_process_info.my_hnp_uri);
/* we are also officially a daemon, so better update that field too */
orte_process_info.my_daemon_uri = strdup(orte_process_info.my_hnp_uri);
/* setup the orte_show_help system to recv remote output */
orte_rml.recv_buffer_nb(ORTE_NAME_WILDCARD, ORTE_RML_TAG_SHOW_HELP,
ORTE_RML_PERSISTENT, orte_show_help_recv, NULL);
/* setup my session directory */
if (orte_create_session_dirs) {
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s setting up session dir with\n\ttmpdir: %s\n\thost %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
(NULL == orte_process_info.tmpdir_base) ? "UNDEF" : orte_process_info.tmpdir_base,
orte_process_info.nodename));
/* take a pass thru the session directory code to fillin the
* tmpdir names - don't create anything yet
*/
if (ORTE_SUCCESS != (ret = orte_session_dir(false,
orte_process_info.tmpdir_base,
orte_process_info.nodename, NULL,
ORTE_PROC_MY_NAME))) {
ORTE_ERROR_LOG(ret);
error = "orte_session_dir define";
goto error;
}
/* clear the session directory just in case there are
* stale directories laying around
*/
orte_session_dir_cleanup(ORTE_JOBID_WILDCARD);
/* now actually create the directory tree */
if (ORTE_SUCCESS != (ret = orte_session_dir(true,
orte_process_info.tmpdir_base,
orte_process_info.nodename, NULL,
ORTE_PROC_MY_NAME))) {
ORTE_ERROR_LOG(ret);
error = "orte_session_dir";
goto error;
}
/* Once the session directory location has been established, set
the opal_output hnp file location to be in the
proc-specific session directory. */
opal_output_set_output_file_info(orte_process_info.proc_session_dir,
"output-", NULL, NULL);
/* save my contact info in a file for others to find */
jobfam_dir = opal_dirname(orte_process_info.job_session_dir);
contact_path = opal_os_path(false, jobfam_dir, "contact.txt", NULL);
free(jobfam_dir);
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s writing contact file %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
contact_path));
if (ORTE_SUCCESS != (ret = orte_write_hnp_contact_file(contact_path))) {
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s writing contact file failed with error %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME),
ORTE_ERROR_NAME(ret)));
} else {
OPAL_OUTPUT_VERBOSE((2, orte_debug_output,
"%s wrote contact file",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME)));
}
free(contact_path);
}
/* setup the routed info - the selected routed component
* will know what to do.
*/
if (ORTE_SUCCESS != (ret = orte_routed.init_routes(ORTE_PROC_MY_NAME->jobid, NULL))) {
ORTE_ERROR_LOG(ret);
error = "orte_routed.init_routes";
goto error;
}
/* setup I/O forwarding system - must come after we init routes */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_iof_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_iof_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_iof_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_iof_base_select";
goto error;
}
/* setup the FileM */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_filem_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_filem_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_select";
goto error;
}
#if OPAL_ENABLE_FT_CR == 1
/*
* Setup the SnapC
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_snapc_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_snapc_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_sstore_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_sstore_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_snapc_base_select(ORTE_PROC_IS_HNP, ORTE_PROC_IS_APP))) {
ORTE_ERROR_LOG(ret);
error = "orte_snapc_base_select";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_sstore_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_sstore_base_select";
goto error;
}
/* For HNP, ORTE doesn't need the OPAL CR stuff */
opal_cr_set_enabled(false);
#else
opal_cr_set_enabled(false);
#endif
/*
* Initalize the CR setup
* Note: Always do this, even in non-FT builds.
* If we don't some user level tools may hang.
*/
if (ORTE_SUCCESS != (ret = orte_cr_init())) {
ORTE_ERROR_LOG(ret);
error = "orte_cr_init";
goto error;
}
/* setup the dfs framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_dfs_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_dfs_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_select";
goto error;
}
/* if a tool has launched us and is requesting event reports,
* then set its contact info into the comm system
*/
if (orte_report_events) {
if (ORTE_SUCCESS != (ret = orte_util_comm_connect_tool(orte_report_events_uri))) {
error = "could not connect to tool";
goto error;
}
}
/* We actually do *not* want an HNP to voluntarily yield() the
processor more than necessary. Orterun already blocks when
it is doing nothing, so it doesn't use any more CPU cycles than
it should; but when it *is* doing something, we do not want it
to be unnecessarily delayed because it voluntarily yielded the
processor in the middle of its work.
For example: when a message arrives at orterun, we want the
OS to wake us up in a timely fashion (which most OS's
seem good about doing) and then we want orterun to process
the message as fast as possible. If orterun yields and lets
aggressive MPI applications get the processor back, it may be a
long time before the OS schedules orterun to run again
(particularly if there is no IO event to wake it up). Hence,
routed OOB messages (for example) may be significantly delayed
before being delivered to MPI processes, which can be
problematic in some scenarios (e.g., COMM_SPAWN, BTL's that
require OOB messages for wireup, etc.). */
opal_progress_set_yield_when_idle(false);
return ORTE_SUCCESS;
error:
if (ORTE_ERR_SILENT != ret && !orte_report_silent_errors) {
orte_show_help("help-orte-runtime.txt",
"orte_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
}
return ORTE_ERR_SILENT;
}
static int orcmd_init(void)
{
int ret = ORTE_ERROR;
char *error = NULL;
opal_buffer_t buf, *clusterbuf, *uribuf;
orte_job_t *jdata;
orte_node_t *node;
orte_proc_t *proc;
opal_list_t config;
orcm_scheduler_t *scheduler;
orcm_node_t *mynode=NULL;
int32_t n;
if (initialized) {
return ORCM_SUCCESS;
}
initialized = true;
/* Initialize the ORTE data type support */
if (ORTE_SUCCESS != (ret = orte_ess_base_std_prolog())) {
error = "orte_std_prolog";
goto error;
}
/* setup the global job and node arrays */
orte_job_data = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_job_data,
1,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
1))) {
ORTE_ERROR_LOG(ret);
error = "setup job array";
goto error;
}
orte_node_pool = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_pool,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node array";
goto error;
}
orte_node_topologies = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_topologies,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node topologies array";
goto error;
}
/* create a job tracker for the daemons */
jdata = OBJ_NEW(orte_job_t);
jdata->jobid = 0;
ORTE_PROC_MY_NAME->jobid = 0;
opal_pointer_array_set_item(orte_job_data, 0, jdata);
/* read the site configuration */
OBJ_CONSTRUCT(&config, opal_list_t);
if (ORCM_SUCCESS != (ret = orcm_cfgi.read_config(&config))) {
error = "getting config";
goto error;
}
/* define the cluster and collect contact info for all
* aggregators - we'll need to know how to talk to any
* of them in case of failures
*/
OBJ_CONSTRUCT(&buf, opal_buffer_t);
if (ORCM_SUCCESS != (ret = orcm_cfgi.define_system(&config,
&mynode,
&orte_process_info.num_procs,
&buf))) {
OBJ_DESTRUCT(&buf);
error = "define system";
goto error;
}
/* if my name didn't get set, then we didn't find our node
* in the config - report it and die
*/
if (NULL == mynode) {
orte_show_help("help-ess-orcm.txt", "node-not-found", true,
orcm_cfgi_base.config_file,
orte_process_info.nodename);
OBJ_DESTRUCT(&buf);
return ORTE_ERR_SILENT;
}
/* define a node and proc object for ourselves as some parts
* of ORTE and ORCM require it */
if (NULL == (node = OBJ_NEW(orte_node_t))) {
ret = ORTE_ERR_OUT_OF_RESOURCE;
error = "out of memory";
goto error;
}
node->name = strdup(orte_process_info.nodename);
opal_pointer_array_set_item(orte_node_pool, ORTE_PROC_MY_NAME->vpid, node);
if (NULL == (proc = OBJ_NEW(orte_proc_t))) {
ret = ORTE_ERR_OUT_OF_RESOURCE;
error = "out of memory";
goto error;
}
proc->name.jobid = ORTE_PROC_MY_NAME->jobid;
proc->name.vpid = ORTE_PROC_MY_NAME->vpid;
OBJ_RETAIN(proc);
node->daemon = proc;
OBJ_RETAIN(node);
proc->node = node;
opal_pointer_array_set_item(jdata->procs, ORTE_PROC_MY_NAME->vpid, proc);
/* For now, we only support a single scheduler daemon in the system.
* This *may* change someday in the future */
scheduler = (orcm_scheduler_t*)opal_list_get_first(orcm_schedulers);
/* If we are in test mode, then we don't *require* that a scheduler
* be defined in the system - otherwise, we do */
if (NULL == scheduler) {
if (mca_sst_orcmd_component.scheduler_reqd) {
error = "no scheduler found";
ret = ORTE_ERR_NOT_FOUND;
goto error;
}
} else {
ORTE_PROC_MY_SCHEDULER->jobid = scheduler->controller.daemon.jobid;
ORTE_PROC_MY_SCHEDULER->vpid = scheduler->controller.daemon.vpid;
}
/* register the ORTE-level params at this time now that the
* config has had a chance to push things into the environ
*/
if (ORTE_SUCCESS != (ret = orte_register_params())) {
OBJ_DESTRUCT(&buf);
error = "orte_register_params";
goto error;
}
/* setup callback for SIGPIPE */
setup_sighandler(SIGPIPE, &epipe_handler, epipe_signal_callback);
/* Set signal handlers to catch kill signals so we can properly clean up
* after ourselves.
*/
setup_sighandler(SIGTERM, &term_handler, shutdown_signal);
setup_sighandler(SIGINT, &int_handler, shutdown_signal);
/** setup callbacks for signals we should ignore */
setup_sighandler(SIGUSR1, &sigusr1_handler, signal_callback);
setup_sighandler(SIGUSR2, &sigusr2_handler, signal_callback);
signals_set = true;
#if OPAL_HAVE_HWLOC
{
hwloc_obj_t obj;
unsigned i, j;
/* get the local topology */
if (NULL == opal_hwloc_topology) {
if (OPAL_SUCCESS != opal_hwloc_base_get_topology()) {
OBJ_DESTRUCT(&buf);
error = "topology discovery";
goto error;
}
}
/* remove the hostname from the topology. Unfortunately, hwloc
* decided to add the source hostname to the "topology", thus
* rendering it unusable as a pure topological description. So
* we remove that information here.
*/
obj = hwloc_get_root_obj(opal_hwloc_topology);
for (i=0; i < obj->infos_count; i++) {
if (NULL == obj->infos[i].name ||
NULL == obj->infos[i].value) {
continue;
}
if (0 == strncmp(obj->infos[i].name, "HostName", strlen("HostName"))) {
free(obj->infos[i].name);
free(obj->infos[i].value);
/* left justify the array */
for (j=i; j < obj->infos_count-1; j++) {
obj->infos[j] = obj->infos[j+1];
}
obj->infos[obj->infos_count-1].name = NULL;
obj->infos[obj->infos_count-1].value = NULL;
obj->infos_count--;
break;
}
}
if (15 < opal_output_get_verbosity(orcm_sst_base_framework.framework_output)) {
opal_output(0, "%s Topology Info:", ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
opal_dss.dump(0, opal_hwloc_topology, OPAL_HWLOC_TOPO);
}
/* if we were asked to bind to specific core(s), do so now */
if (NULL != orte_daemon_cores) {
char **cores=NULL, tmp[128];
hwloc_obj_t pu;
hwloc_cpuset_t ours, pucpus, res;
int core;
/* could be a collection of comma-delimited ranges, so
* use our handy utility to parse it
*/
orte_util_parse_range_options(orte_daemon_cores, &cores);
if (NULL != cores) {
ours = hwloc_bitmap_alloc();
hwloc_bitmap_zero(ours);
pucpus = hwloc_bitmap_alloc();
res = hwloc_bitmap_alloc();
for (i=0; NULL != cores[i]; i++) {
core = strtoul(cores[i], NULL, 10);
if (NULL == (pu = opal_hwloc_base_get_pu(opal_hwloc_topology, core, OPAL_HWLOC_LOGICAL))) {
orte_show_help("help-orted.txt", "orted:cannot-bind",
true, orte_process_info.nodename,
orte_daemon_cores);
ret = ORTE_ERR_NOT_SUPPORTED;
OBJ_DESTRUCT(&buf);
error = "cannot bind";
goto error;
}
hwloc_bitmap_and(pucpus, pu->online_cpuset, pu->allowed_cpuset);
hwloc_bitmap_or(res, ours, pucpus);
hwloc_bitmap_copy(ours, res);
}
/* if the result is all zeros, then don't bind */
if (!hwloc_bitmap_iszero(ours)) {
(void)hwloc_set_cpubind(opal_hwloc_topology, ours, 0);
if (opal_hwloc_report_bindings) {
opal_hwloc_base_cset2mapstr(tmp, sizeof(tmp), opal_hwloc_topology, ours);
opal_output(0, "Daemon %s is bound to cores %s",
ORTE_NAME_PRINT(ORTE_PROC_MY_NAME), tmp);
}
}
/* cleanup */
hwloc_bitmap_free(ours);
hwloc_bitmap_free(pucpus);
hwloc_bitmap_free(res);
opal_argv_free(cores);
}
}
}
#endif
/* open and select the pstat framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_pstat_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "opal_pstat_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_pstat_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "opal_pstat_base_select";
goto error;
}
/* open and setup the state machine */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_state_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_state_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_state_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_state_base_select";
goto error;
}
/* open the notifier */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_notifier_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_notifier_base_open";
goto error;
}
/* open the errmgr */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_errmgr_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_errmgr_base_open";
goto error;
}
/* Setup the communication infrastructure */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_oob_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_oob_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_oob_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_oob_base_select";
goto error;
}
if (!opal_list_get_size(&orte_oob_base.actives)) {
ret = ORTE_ERROR;
error = "orte_oob: Found 0 active transports";
goto error;
}
/* Runtime Messaging Layer */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rml_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rml_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_rml_base_select";
goto error;
}
/* select the notifier*/
if (ORTE_SUCCESS != (ret = orte_notifier_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_notifier_base_select";
goto error;
}
/* select the errmgr */
if (ORTE_SUCCESS != (ret = orte_errmgr_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_errmgr_base_select";
goto error;
}
/* Routed system */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_routed_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_routed_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_routed_base_select";
goto error;
}
/* database */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orcm_db_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orcm_db_base_open";
goto error;
}
/* always restrict daemons to local database components */
if (ORTE_SUCCESS != (ret = orcm_db_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orcm_db_base_select";
goto error;
}
/* datastore - ensure we don't pickup the pmi component, but
* don't override anything set by user
*/
if (NULL == getenv(OPAL_MCA_PREFIX"dstore")) {
putenv(OPAL_MCA_PREFIX"dstore=^pmi");
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_dstore_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_dstore_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_select";
goto error;
}
/* create the handle */
if (0 > (opal_dstore_internal = opal_dstore.open("INTERNAL", NULL, NULL))) {
error = "opal dstore internal";
ret = ORTE_ERR_FATAL;
goto error;
}
/* extract the cluster description and setup the routed info - the orcm routed component
* will know what to do. */
n = 1;
if (OPAL_SUCCESS != (ret = opal_dss.unpack(&buf, &clusterbuf, &n, OPAL_BUFFER))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "extract cluster buf";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_routed.init_routes(ORTE_PROC_MY_NAME->jobid, clusterbuf))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
OBJ_RELEASE(clusterbuf);
error = "orte_routed.init_routes";
goto error;
}
OBJ_RELEASE(clusterbuf);
/* extract the uri buffer and load the hash tables */
n = 1;
if (OPAL_SUCCESS != (ret = opal_dss.unpack(&buf, &uribuf, &n, OPAL_BUFFER))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "extract uri buffer";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rml_base_update_contact_info(uribuf))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
OBJ_RELEASE(uribuf);
error = "load hash tables";
goto error;
}
OBJ_DESTRUCT(&buf);
OBJ_RELEASE(uribuf);
/*
* Group communications
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_grpcomm_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_grpcomm_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_select";
goto error;
}
/* Open/select the odls */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_odls_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_odls_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_select";
goto error;
}
/* enable communication with the rml */
if (ORTE_SUCCESS != (ret = orte_rml.enable_comm())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml.enable_comm";
goto error;
}
/* setup the FileM */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_filem_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_filem_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_select";
goto error;
}
/*
* Initalize the CR setup
* Note: Always do this, even in non-FT builds.
* If we don't some user level tools may hang.
*/
opal_cr_set_enabled(false);
if (ORTE_SUCCESS != (ret = orte_cr_init())) {
ORTE_ERROR_LOG(ret);
error = "orte_cr_init";
goto error;
}
/* setup the ANALYTICS framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orcm_analytics_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orcm_analytics_base_open";
goto error;
}
/* setup the EVGEN framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orcm_evgen_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orcm_evgen_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orcm_evgen_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orcm_evgen_select";
goto error;
}
/* setup the SENSOR framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orcm_sensor_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orcm_sensor_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orcm_sensor_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orcm_sensor_select";
goto error;
}
/* start the local sensors */
orcm_sensor.start(ORTE_PROC_MY_NAME->jobid);
/* setup the PWRMGMT framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orcm_pwrmgmt_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orcm_pwrmgmt_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orcm_pwrmgmt_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orcm_pwrmgmt_select";
goto error;
}
/* setup the DFS framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_dfs_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_dfs_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_select";
goto error;
}
/* open and setup the DIAG framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orcm_diag_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orcm_diag_base_open";
goto error;
}
if (ORCM_SUCCESS != (ret = orcm_diag_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orcm_diag_select";
goto error;
}
return ORTE_SUCCESS;
error:
orte_show_help("help-orcm-runtime.txt",
"orcm_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
return ORTE_ERR_SILENT;
}
int orte_init(int* pargc, char*** pargv, orte_proc_type_t flags)
{
int ret;
char *error = NULL;
if (0 < orte_initialized) {
/* track number of times we have been called */
orte_initialized++;
return ORTE_SUCCESS;
}
orte_initialized++;
/* initialize the opal layer */
if (ORTE_SUCCESS != (ret = opal_init(pargc, pargv))) {
error = "opal_init";
goto error;
}
/* Convince OPAL to use our naming scheme */
opal_process_name_print = _process_name_print_for_opal;
opal_vpid_print = _vpid_print_for_opal;
opal_jobid_print = _jobid_print_for_opal;
opal_compare_proc = _process_name_compare;
opal_convert_string_to_process_name = _convert_string_to_process_name;
/* ensure we know the type of proc for when we finalize */
orte_process_info.proc_type = flags;
/* setup the locks */
if (ORTE_SUCCESS != (ret = orte_locks_init())) {
error = "orte_locks_init";
goto error;
}
/* Register all MCA Params */
if (ORTE_SUCCESS != (ret = orte_register_params())) {
error = "orte_register_params";
goto error;
}
/* setup the orte_show_help system */
if (ORTE_SUCCESS != (ret = orte_show_help_init())) {
error = "opal_output_init";
goto error;
}
/* register handler for errnum -> string conversion */
opal_error_register("ORTE", ORTE_ERR_BASE, ORTE_ERR_MAX, orte_err2str);
/* Ensure the rest of the process info structure is initialized */
if (ORTE_SUCCESS != (ret = orte_proc_info())) {
error = "orte_proc_info";
goto error;
}
/* we may have modified the local nodename according to
* request to retain/strip the FQDN and prefix, so update
* it here. The OPAL layer will strdup the hostname, so
* we have to free it first to avoid a memory leak */
if (NULL != opal_process_info.nodename) {
free(opal_process_info.nodename);
}
/* opal_finalize_util will call free on this pointer so set from strdup */
opal_process_info.nodename = strdup (orte_process_info.nodename);
/* setup the dstore framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_dstore_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_dstore_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_select";
goto error;
}
/* create the handle */
if (0 > (opal_dstore_internal = opal_dstore.open("INTERNAL", "hash", NULL))) {
error = "opal dstore internal";
ret = ORTE_ERR_FATAL;
goto error;
}
if (ORTE_PROC_IS_APP) {
if (0 > (opal_dstore_modex = opal_dstore.open("MODEX", "sm,hash", NULL))) {
error = "opal dstore modex";
ret = ORTE_ERR_FATAL;
goto error;
}
}
if (ORTE_PROC_IS_DAEMON || ORTE_PROC_IS_HNP) {
/* let the pmix server register params */
pmix_server_register();
}
/* open the ESS and select the correct module for this environment */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_ess_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_ess_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_ess_base_select())) {
error = "orte_ess_base_select";
goto error;
}
if (!ORTE_PROC_IS_APP) {
/* ORTE tools "block" in their own loop over the event
* base, so no progress thread is required - apps will
* start their progress thread in ess_base_std_app.c
* at the appropriate point
*/
orte_event_base = opal_event_base;
}
/* initialize the RTE for this environment */
if (ORTE_SUCCESS != (ret = orte_ess.init())) {
error = "orte_ess_init";
goto error;
}
/* set the remaining opal_process_info fields. Note that
* the OPAL layer will have initialized these to NULL, and
* anyone between us would not have strdup'd the string, so
* we cannot free it here */
opal_process_info.job_session_dir = orte_process_info.job_session_dir;
opal_process_info.proc_session_dir = orte_process_info.proc_session_dir;
opal_process_info.num_local_peers = (int32_t)orte_process_info.num_local_peers;
opal_process_info.my_local_rank = (int32_t)orte_process_info.my_local_rank;
#if OPAL_HAVE_HWLOC
opal_process_info.cpuset = orte_process_info.cpuset;
#endif /* OPAL_HAVE_HWLOC */
#if OPAL_ENABLE_TIMING
opal_timing_set_jobid(ORTE_NAME_PRINT(ORTE_PROC_MY_NAME));
#endif
/* All done */
return ORTE_SUCCESS;
error:
if (ORTE_ERR_SILENT != ret) {
orte_show_help("help-orte-runtime",
"orte_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
}
return ret;
}
static int tool_init(void)
{
int ret = ORTE_ERROR;
char *error = NULL;
opal_buffer_t buf, *clusterbuf, *uribuf;
orte_job_t *jdata;
orte_node_t *node;
orte_proc_t *proc;
opal_list_t config;
orcm_scheduler_t *scheduler;
orcm_node_t *mynode=NULL;
int32_t n;
if (initialized) {
return ORCM_SUCCESS;
}
initialized = true;
/* Initialize the ORTE data type support */
if (ORTE_SUCCESS != (ret = orte_ess_base_std_prolog())) {
error = "orte_std_prolog";
goto error;
}
/* setup the global job and node arrays */
orte_job_data = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_job_data,
1,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
1))) {
ORTE_ERROR_LOG(ret);
error = "setup job array";
goto error;
}
orte_node_pool = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_pool,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node array";
goto error;
}
orte_node_topologies = OBJ_NEW(opal_pointer_array_t);
if (ORTE_SUCCESS != (ret = opal_pointer_array_init(orte_node_topologies,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE,
ORTE_GLOBAL_ARRAY_MAX_SIZE,
ORTE_GLOBAL_ARRAY_BLOCK_SIZE))) {
ORTE_ERROR_LOG(ret);
error = "setup node topologies array";
goto error;
}
/* create a job tracker for the daemons */
jdata = OBJ_NEW(orte_job_t);
jdata->jobid = 0;
ORTE_PROC_MY_NAME->jobid = 0;
opal_pointer_array_set_item(orte_job_data, 0, jdata);
/* read the site configuration */
OBJ_CONSTRUCT(&config, opal_list_t);
if (ORCM_SUCCESS != (ret = orcm_cfgi.read_config(&config))) {
error = "getting config";
goto error;
}
/* define the cluster and collect contact info for all
* aggregators - we'll need to know how to talk to any
* of them in case of failures
*/
OBJ_CONSTRUCT(&buf, opal_buffer_t);
if (ORCM_SUCCESS != (ret = orcm_cfgi.define_system(&config,
&mynode,
&orte_process_info.num_procs,
&buf))) {
OBJ_DESTRUCT(&buf);
error = "define system";
goto error;
}
/* define a name for myself */
if (ORTE_SUCCESS != (ret = orte_plm_base_set_hnp_name())) {
ORTE_ERROR_LOG(ret);
error = "orte_plm_base_set_hnp_name";
goto error;
}
/* define a node and proc object for ourselves as some parts
* of ORTE and ORCM require it */
if (NULL == (node = OBJ_NEW(orte_node_t))) {
ret = ORTE_ERR_OUT_OF_RESOURCE;
error = "out of memory";
goto error;
}
node->name = strdup(orte_process_info.nodename);
opal_pointer_array_set_item(orte_node_pool, ORTE_PROC_MY_NAME->vpid, node);
if (NULL == (proc = OBJ_NEW(orte_proc_t))) {
ret = ORTE_ERR_OUT_OF_RESOURCE;
error = "out of memory";
goto error;
}
proc->name.jobid = ORTE_PROC_MY_NAME->jobid;
proc->name.vpid = ORTE_PROC_MY_NAME->vpid;
OBJ_RETAIN(proc);
node->daemon = proc;
OBJ_RETAIN(node);
proc->node = node;
opal_pointer_array_set_item(jdata->procs, ORTE_PROC_MY_NAME->vpid, proc);
/* For now, we only support a single scheduler daemon in the system.
* This *may* change someday in the future */
scheduler = (orcm_scheduler_t*)opal_list_get_first(orcm_schedulers);
ORTE_PROC_MY_SCHEDULER->jobid = scheduler->controller.daemon.jobid;
ORTE_PROC_MY_SCHEDULER->vpid = scheduler->controller.daemon.vpid;
/* register the ORTE-level params at this time now that the
* config has had a chance to push things into the environ
*/
if (ORTE_SUCCESS != (ret = orte_register_params())) {
OBJ_DESTRUCT(&buf);
error = "orte_register_params";
goto error;
}
/* setup callback for SIGPIPE */
setup_sighandler(SIGPIPE, &epipe_handler, epipe_signal_callback);
/* Set signal handlers to catch kill signals so we can properly clean up
* after ourselves.
*/
setup_sighandler(SIGTERM, &term_handler, shutdown_signal);
setup_sighandler(SIGINT, &int_handler, shutdown_signal);
/** setup callbacks for signals we should ignore */
setup_sighandler(SIGUSR1, &sigusr1_handler, signal_callback);
setup_sighandler(SIGUSR2, &sigusr2_handler, signal_callback);
signals_set = true;
/* open and select the pstat framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_pstat_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "opal_pstat_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_pstat_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "opal_pstat_base_select";
goto error;
}
/* open and setup the state machine */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_state_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_state_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_state_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_state_base_select";
goto error;
}
/* open the errmgr */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_errmgr_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_errmgr_base_open";
goto error;
}
/* Setup the communication infrastructure */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_oob_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_oob_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_oob_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_oob_base_select";
goto error;
}
/* Runtime Messaging Layer */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_rml_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rml_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_rml_base_select";
goto error;
}
/* select the errmgr */
if (ORTE_SUCCESS != (ret = orte_errmgr_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_errmgr_base_select";
goto error;
}
/* Routed system */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_routed_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_rml_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_routed_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_routed_base_select";
goto error;
}
/* database */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orcm_db_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orcm_db_base_open";
goto error;
}
/* always restrict daemons to local database components */
if (ORTE_SUCCESS != (ret = orcm_db_base_select())) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orcm_db_base_select";
goto error;
}
/* datastore - ensure we don't pickup the pmi component, but
* don't override anything set by user
*/
if (NULL == getenv("OMPI_MCA_dstore")) {
putenv("OMPI_MCA_dstore=^pmi");
}
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&opal_dstore_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = opal_dstore_base_select())) {
ORTE_ERROR_LOG(ret);
error = "opal_dstore_base_select";
goto error;
}
/* create the handles */
if (0 > (opal_dstore_peer = opal_dstore.open("PEER"))) {
error = "opal dstore global";
ret = ORTE_ERR_FATAL;
goto error;
}
if (0 > (opal_dstore_internal = opal_dstore.open("INTERNAL"))) {
error = "opal dstore internal";
ret = ORTE_ERR_FATAL;
goto error;
}
if (0 > (opal_dstore_nonpeer = opal_dstore.open("NONPEER"))) {
error = "opal dstore nonpeer";
ret = ORTE_ERR_FATAL;
goto error;
}
/* initialize the nidmaps */
if (ORTE_SUCCESS != (ret = orte_util_nidmap_init(NULL))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "orte_util_nidmap_init";
goto error;
}
/* extract the cluster description and setup the routed info - the orcm routed component
* will know what to do. */
n = 1;
if (OPAL_SUCCESS != (ret = opal_dss.unpack(&buf, &clusterbuf, &n, OPAL_BUFFER))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "extract cluster buf";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_routed.init_routes(ORTE_PROC_MY_NAME->jobid, clusterbuf))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
OBJ_RELEASE(clusterbuf);
error = "orte_routed.init_routes";
goto error;
}
OBJ_RELEASE(clusterbuf);
/* extract the uri buffer and load the hash tables */
n = 1;
if (OPAL_SUCCESS != (ret = opal_dss.unpack(&buf, &uribuf, &n, OPAL_BUFFER))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
error = "extract uri buffer";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_rml_base_update_contact_info(uribuf))) {
ORTE_ERROR_LOG(ret);
OBJ_DESTRUCT(&buf);
OBJ_RELEASE(uribuf);
error = "load hash tables";
goto error;
}
OBJ_DESTRUCT(&buf);
OBJ_RELEASE(uribuf);
/* construct the thread object */
OBJ_CONSTRUCT(&progress_thread, opal_thread_t);
/* fork off a thread to progress it */
progress_thread.t_run = progress_thread_engine;
progress_thread_running = true;
if (OPAL_SUCCESS != (ret = opal_thread_start(&progress_thread))) {
error = "progress thread start";
progress_thread_running = false;
goto error;
}
/*
* Group communications
*/
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_grpcomm_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_grpcomm_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_grpcomm_base_select";
goto error;
}
/* Open/select the odls */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_odls_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_odls_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_odls_base_select";
goto error;
}
/* enable communication with the rml */
if (ORTE_SUCCESS != (ret = orte_rml.enable_comm())) {
ORTE_ERROR_LOG(ret);
error = "orte_rml.enable_comm";
goto error;
}
/* setup the FileM */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_filem_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_filem_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_filem_base_select";
goto error;
}
/*
* Initalize the CR setup
* Note: Always do this, even in non-FT builds.
* If we don't some user level tools may hang.
*/
opal_cr_set_enabled(false);
if (ORTE_SUCCESS != (ret = orte_cr_init())) {
ORTE_ERROR_LOG(ret);
error = "orte_cr_init";
goto error;
}
/* setup the DFS framework */
if (ORTE_SUCCESS != (ret = mca_base_framework_open(&orte_dfs_base_framework, 0))) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_base_open";
goto error;
}
if (ORTE_SUCCESS != (ret = orte_dfs_base_select())) {
ORTE_ERROR_LOG(ret);
error = "orte_dfs_select";
goto error;
}
return ORTE_SUCCESS;
error:
orte_show_help("help-orte-runtime.txt",
"orte_init:startup:internal-failure",
true, error, ORTE_ERROR_NAME(ret), ret);
return ORTE_ERR_SILENT;
}
