/**
* bus->driver->(*read_end)
*
*/
static uint32_t
sharc_21065L_bus_read_end( bus_t *bus )
{
part_t *p = PART;
chain_t *chain = CHAIN;
if (LAST_ADR < UINT32_C(0x080000)) {
int i;
uint32_t d = 0;
bus_area_t area;
sharc_21065L_bus_area( bus, LAST_ADR, &area );
part_set_signal( p, BMS, 1, 1 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 1 );
chain_shift_data_registers( chain, 1 );
for (i = 0; i < area.width; i++)
d |= (uint32_t) (part_get_signal( p, MD[i] ) << i);
return d;
}
return 0;
}
/**
* bus->driver->(*read_end)
*
*/
static uint32_t
jopcyc_bus_read_end( bus_t *bus )
{
part_t *p = PART;
chain_t *chain = CHAIN;
int i;
uint32_t d = 0;
bus_area_t area;
component_t *comp;
/* use last address of access to determine component */
comp_bus_area( bus, LAST_ADDR, &area, &comp );
if (!comp) {
printf( _("Address out of range\n") );
return 0;
}
part_set_signal( p, nCS, 1, 1 );
part_set_signal( p, nOE, 1, 1 );
if (comp->ctype == RAM) {
part_set_signal( p, nLB, 1, 1 );
part_set_signal( p, nUB, 1, 1 );
}
chain_shift_data_registers( chain, 1 );
for (i = 0; i < area.width; i++)
d |= (uint32_t) (part_get_signal( p, D[i] ) << i);
return d;
}
/**
* bus->driver->(*read_start)
*
*/
static void
jopcyc_bus_read_start( bus_t *bus, uint32_t adr )
{
part_t *p = PART;
chain_t *chain = CHAIN;
bus_area_t area;
component_t *comp;
comp_bus_area( bus, adr, &area, &comp );
if (!comp) {
printf( _("Address out of range\n") );
LAST_ADDR = adr;
return;
}
part_set_signal( p, nCS, 1, 0 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 0 );
if (comp->ctype == RAM) {
part_set_signal( p, nLB, 1, 0 );
part_set_signal( p, nUB, 1, 0 );
}
setup_address( bus, adr, comp );
set_data_in( bus, comp );
chain_shift_data_registers( chain, 0 );
}
/**
* bus->driver->(*read_end)
*
*/
static uint32_t
sh7750r_bus_read_end( bus_t *bus )
{
part_t *p = PART;
int cs[8];
int i;
uint32_t d = 0;
for (i = 0; i < 8; i++)
cs[i] = 1;
part_set_signal( p, CS[0], 1, cs[0] );
part_set_signal( p, CS[1], 1, cs[1] );
part_set_signal( p, CS[2], 1, cs[2] );
part_set_signal( p, CS[3], 1, cs[3] );
part_set_signal( p, CS[4], 1, cs[4] );
part_set_signal( p, CS[5], 1, cs[5] );
part_set_signal( p, CS[6], 1, cs[6] );
part_set_signal( p, RD, 1, 1 );
part_set_signal( p, RD2, 1, 1 );
chain_shift_data_registers( CHAIN, 1 );
for (i = 0; i < 32; i++)
d |= (uint32_t) (part_get_signal( p, D[i] ) << i);
return d;
}
static void
ppc440gx_ebc8_bus_read_start( bus_t *bus, uint32_t adr )
{
part_t *p = PART;
chain_t *chain = CHAIN;
part_set_signal( p, nCS, 1, 0 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 0 );
setup_address( bus, adr );
set_data_in( bus );
chain_shift_data_registers( chain, 0 );
}
/**
* bus->driver->(*read_start)
*
*/
static void
bf533_ezkit_bus_read_start( bus_t *bus, uint32_t adr )
{
part_t *p = PART;
chain_t *chain = CHAIN;
select_flash( bus );
part_set_signal( p, AOE, 1, 0 );
part_set_signal( p, AWE, 1, 1 );
setup_address( bus, adr );
set_data_in( bus );
chain_shift_data_registers( chain, 0 );
}
/**
* bus->driver->(*read_end)
*
*/
static uint32_t
sh7727_bus_read_end( bus_t *bus )
{
part_t *p = PART;
int i;
uint32_t d = 0;
bus_area_t area;
sh7727_bus_area( bus, 0, &area );
part_set_signal( p, CS[0], 1, 1 );
part_set_signal( p, CS[2], 1, 1 );
part_set_signal( p, CS[3], 1, 1 );
part_set_signal( p, CS[4], 1, 1 );
part_set_signal( p, CS[5], 1, 1 );
part_set_signal( p, CS[6], 1, 1 );
part_set_signal( p, RD, 1, 1 );
chain_shift_data_registers( CHAIN, 1 );
for (i = 0; i < area.width; i++)
d |= (uint32_t) (part_get_signal( p, D[i] ) << i);
return d;
}
static void
unselect_flash( bus_t *bus )
{
part_t *p = PART;
part_set_signal( p, AMS[0], 1, 1 );
part_set_signal( p, AMS[1], 1, 1 );
part_set_signal( p, AMS[2], 1, 1 );
part_set_signal( p, AMS[3], 1, 1 );
part_set_signal( p, ABE[0], 1, 1 );
part_set_signal( p, ABE[1], 1, 1 );
part_set_signal( p, SRAS, 1, 1 );
part_set_signal( p, SCAS, 1, 1 );
part_set_signal( p, SWE, 1, 1 );
part_set_signal( p, SMS, 1, 1 );
}
static void
set_data_in( bus_t *bus )
{
int i;
part_t *p = PART;
for (i = 0; i < 16; i++)
part_set_signal( p, DATA[i], 0, 0 );
}
static void
set_data_in( bus_t *bus )
{
int i;
part_t *p = PART;
for (i = 0; i < dbus_width; i++)
part_set_signal( p, D[i], 0, 0 );
}
static void s3c4510_bus_setup_ctrl( bus_t *bus, int mode )
{
int k;
part_t *p = PART;
for (k = 0; k < 6; k++)
part_set_signal( p, nRCS[k], 1, (mode & (1 << k)) ? 1 : 0 );
for (k = 0; k < 4; k++)
part_set_signal( p, nECS[k], 1, 1 );
for (k = 0; k < 4; k++)
part_set_signal( p, nSDCS[k], 1, 1 );
for (k = 0; k < 4; k++)
part_set_signal( p, nWBE[k], 1, (mode & (1 << (k + 8))) ? 1 : 0 );
part_set_signal( p, nOE, 1, (mode & (1 << 16)) ? 1 : 0 );
}
/**
* bus->driver->(*read_end)
*
*/
static uint32_t
bf533_ezkit_bus_read_end( bus_t *bus )
{
part_t *p = PART;
chain_t *chain = CHAIN;
int i;
uint32_t d = 0;
unselect_flash( bus );
part_set_signal( p, AOE, 1, 1 );
part_set_signal( p, AWE, 1, 1 );
chain_shift_data_registers( chain, 1 );
for (i = 0; i < 16; i++)
d |= (uint32_t) (part_get_signal( p, DATA[i] ) << i);
return d;
}
/**
* bus->driver->(*read_start)
*
*/
static void
sharc_21065L_bus_read_start( bus_t *bus, uint32_t adr )
{
chain_t *chain = CHAIN;
part_t *p = PART;
LAST_ADR = adr;
if (adr >= 0x080000)
return;
part_set_signal( p, BMS, 1, 0 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 0 );
setup_address( bus, adr );
set_data_in( bus, adr );
chain_shift_data_registers( chain, 0 );
}
static uint32_t
ppc440gx_ebc8_bus_read_end( bus_t *bus )
{
part_t *p = PART;
chain_t *chain = CHAIN;
int i;
uint32_t d = 0;
bus_area_t area;
ppc440gx_ebc8_bus_area( bus, 0, &area );
part_set_signal( p, nCS, 1, 1 );
part_set_signal( p, nOE, 1, 1 );
chain_shift_data_registers( chain, 1 );
for (i = 0; i < area.width; i++)
d |= (uint32_t) (part_get_signal( p, D[PPC440GX_DATA_LINES-1-i] ) << i);
return d;
}
static void
set_data_in( part *p )
{
int i;
char buff[10];
for (i = 0; i < 32; i++) {
sprintf( buff, "D%d", i );
part_set_signal( p, buff, 0, 0 );
}
}
static void
set_data_in( bus_t *bus )
{
int i;
part_t *p = PART;
bus_area_t area;
ppc440gx_ebc8_bus_area( bus, 0, &area );
for (i = 0; i < area.width; i++)
part_set_signal( p, D[i], 0, 0 );
}
static void
set_data_in( bus_t *bus, uint32_t adr )
{
int i;
part_t *p = PART;
bus_area_t area;
sharc_21065L_bus_area( bus, adr, &area );
for (i = 0; i < area.width; i++)
part_set_signal( p, MD[i], 0, 0 );
}
static void
setup_data( bus_t *bus, uint32_t d )
{
int i;
part_t *p = PART;
for (i = 0; i < dbus_width; i++)
part_set_signal( p, D[i], 1, (d >> i) & 1 );
/* Set other bits as 0 */
for (i = dbus_width; i < 32; i++)
part_set_signal( p, D[i], 1, 0 );
}
static void
set_data_in( bus_t *bus, component_t *comp )
{
int i;
part_t *p = PART;
int width;
width = detect_data_width( comp );
for (i = 0; i < width; i++)
part_set_signal( p, D[i], 0, 0 );
}
/**
* bus->driver->(*write)
*
*/
static void
bf533_ezkit_bus_write( bus_t *bus, uint32_t adr, uint32_t data )
{
part_t *p = PART;
chain_t *chain = CHAIN;
// printf("Writing %04X to %08X...\n", data, adr);
select_flash( bus );
part_set_signal( p, AOE, 1, 1 );
setup_address( bus, adr );
setup_data( bus, data );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, AWE, 1, 0 );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, AWE, 1, 1 );
unselect_flash( bus );
chain_shift_data_registers( chain, 0 );
}
uint32_t
sa1110_bus_read_end( parts *ps )
{
/* see Figure 10-12 in SA doc */
part *p = ps->parts[0];
part_set_signal( p, "nCS0", 1, 1 );
part_set_signal( p, "nOE", 1, 1 );
parts_shift_data_registers( ps );
{
int i;
char buff[10];
uint32_t d = 0;
for (i = 0; i < 32; i++) {
sprintf( buff, "D%d", i );
d |= (uint32_t) (part_get_signal( p, buff ) << i);
}
return d;
}
}
/**
* bus->driver->(*write)
*
*/
static void
sharc_21065L_bus_write( bus_t *bus, uint32_t adr, uint32_t data )
{
part_t *p = PART;
chain_t *chain = CHAIN;
if (adr >= 0x080000)
return;
part_set_signal( p, BMS, 1, 0 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 1 );
setup_address( bus, adr );
setup_data( bus, adr, data );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, nWE, 1, 0 );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, nWE, 1, 1 );
chain_shift_data_registers( chain, 0 );
}
void
sa1110_bus_read_start( parts *ps, uint32_t adr )
{
/* see Figure 10-12 in SA doc */
part *p = ps->parts[0];
part_set_signal( p, "nCS0", 1, 0 );
part_set_signal( p, "nCS1", 1, 1 );
part_set_signal( p, "nCS2", 1, 1 );
part_set_signal( p, "nCS3", 1, 1 );
part_set_signal( p, "nCS4", 1, 1 );
part_set_signal( p, "nCS5", 1, 1 );
part_set_signal( p, "RD_nWR", 1, 1 );
part_set_signal( p, "nWE", 1, 1 );
part_set_signal( p, "nOE", 1, 0 );
setup_address( p, adr );
set_data_in( p );
parts_shift_data_registers( ps );
}
/**
* bus->driver->(*read_start)
*
*/
static void
sh7727_bus_read_start( bus_t *bus, uint32_t adr )
{
part_t *p = PART;
int cs[8];
int i;
for (i = 0; i < 8; i++)
cs[i] = 1;
cs[(adr & 0x1C000000) >> 26] = 0;
part_set_signal( p, CS[0], 1, cs[0] );
part_set_signal( p, CS[2], 1, cs[2] );
part_set_signal( p, CS[3], 1, cs[3] );
part_set_signal( p, CS[4], 1, cs[4] );
part_set_signal( p, CS[5], 1, cs[5] );
part_set_signal( p, CS[6], 1, cs[6] );
part_set_signal( p, RDWR, 1, 1 );
part_set_signal( p, WE[0], 1, 1 );
part_set_signal( p, WE[1], 1, 1 );
part_set_signal( p, WE[2], 1, 1 );
part_set_signal( p, WE[3], 1, 1 );
part_set_signal( p, RD, 1, 0 );
setup_address( bus, adr );
set_data_in( bus );
chain_shift_data_registers( CHAIN, 0 );
}
/**
* bus->driver->(*write)
*
*/
static void
sh7750r_bus_write( bus_t *bus, uint32_t adr, uint32_t data )
{
chain_t *chain = CHAIN;
part_t *p = PART;
int cs[8];
int i;
for (i = 0; i < 8 ; i++)
cs[i] = 1;
cs[(adr & 0x1C000000) >> 26] = 0;
part_set_signal( p, CS[0], 1, cs[0] );
part_set_signal( p, CS[1], 1, cs[1] );
part_set_signal( p, CS[2], 1, cs[2] );
part_set_signal( p, CS[3], 1, cs[3] );
part_set_signal( p, CS[4], 1, cs[4] );
part_set_signal( p, CS[5], 1, cs[5] );
part_set_signal( p, CS[6], 1, cs[6] );
part_set_signal( p, RDWR, 1, 0 );
part_set_signal( p, RDWR2, 1, 0 );
part_set_signal( p, WE[0], 1, 1 );
part_set_signal( p, WE[1], 1, 1 );
part_set_signal( p, WE[2], 1, 1 );
part_set_signal( p, WE[3], 1, 1 );
part_set_signal( p, RD, 1, 1 );
part_set_signal( p, RD2, 1, 1 );
setup_address( bus, adr );
setup_data( bus, data );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, WE[0], 1, 0 );
part_set_signal( p, WE[1], 1, 0 );
part_set_signal( p, WE[2], 1, 0 );
part_set_signal( p, WE[3], 1, 0 );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, WE[0], 1, 1 );
part_set_signal( p, WE[1], 1, 1 );
part_set_signal( p, WE[2], 1, 1 );
part_set_signal( p, WE[3], 1, 1 );
chain_shift_data_registers( chain, 0 );
}
static uint32_t
s3c4510_bus_read_end( bus_t *bus )
{
/* see Figure 4-19 in [1] */
part_t *p = PART;
chain_t *chain = CHAIN;
int i;
uint32_t d = 0;
part_set_signal( p, nRCS[0], 1, 1 );
part_set_signal( p, nRCS[1], 1, 1 );
part_set_signal( p, nRCS[2], 1, 1 );
part_set_signal( p, nRCS[3], 1, 1 );
part_set_signal( p, nRCS[4], 1, 1 );
part_set_signal( p, nRCS[5], 1, 1 );
part_set_signal( p, nWBE[0], 1, 1 );
part_set_signal( p, nWBE[1], 1, 1 );
part_set_signal( p, nWBE[2], 1, 1 );
part_set_signal( p, nWBE[3], 1, 1 );
part_set_signal( p, nOE, 1, 1 );
chain_shift_data_registers( chain, 1 );
for (i = 0; i < dbus_width; i++)
d |= (uint32_t) (part_get_signal( p, D[i] ) << i);
return d;
}
/**
* bus->driver->(*init)
*
*/
static int
jopcyc_bus_init( bus_t *bus )
{
part_t *p = PART;
chain_t *chain = CHAIN;
component_t *comp;
if (tap_state(chain) != Run_Test_Idle) {
/* silently skip initialization if TAP isn't in RUNTEST/IDLE state
this is required to avoid interfering with detect when initbus
is contained in the part description file
bus_init() will be called latest by bus_prepare() */
return URJTAG_STATUS_OK;
}
/* Preload update registers
See AN039, "Guidelines for IEEE Std. 1149.1 Boundary Scan Testing */
part_set_instruction( p, "SAMPLE/PRELOAD" );
chain_shift_instructions( chain );
/* RAMA */
comp = COMP_RAMA;
set_data_in( bus, comp );
part_set_signal( p, nCS, 1, 1 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 1 );
part_set_signal( p, nLB, 1, 1 );
part_set_signal( p, nUB, 1, 1 );
/* RAMB */
comp = COMP_RAMB;
set_data_in( bus, comp );
part_set_signal( p, nCS, 1, 1 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 1 );
part_set_signal( p, nLB, 1, 1 );
part_set_signal( p, nUB, 1, 1 );
/* FLASH */
comp = COMP_FLASH;
set_data_in( bus, comp );
part_set_signal( p, nCS, 1, 1 );
part_set_signal( p, nWE, 1, 1 );
part_set_signal( p, nOE, 1, 1 );
part_set_signal( p, nCS2, 1, 1 );
part_set_signal( p, nRDY, 0, 0 );
/* Serial Port */
part_set_signal( p, SER_RXD, 0, 0 );
part_set_signal( p, SER_NRTS, 1, 1 );
part_set_signal( p, SER_TXD, 1, 1 );
part_set_signal( p, SER_NCTS, 0, 0 );
chain_shift_data_registers( chain, 0 );
INITIALIZED = 1;
return URJTAG_STATUS_OK;
}
/**
** @brief
** ROM/SRAM/FlashPage Write Access Timing
*/
static void
s3c4510_bus_write( bus_t *bus, uint32_t adr, uint32_t data )
{
/* see Figure 4-21 in [1] */
part_t *p = PART;
chain_t *chain = CHAIN;
part_set_signal( p, nRCS[0], 1, 0 );
part_set_signal( p, nRCS[1], 1, 1 );
part_set_signal( p, nRCS[2], 1, 1 );
part_set_signal( p, nRCS[3], 1, 1 );
part_set_signal( p, nRCS[4], 1, 1 );
part_set_signal( p, nRCS[5], 1, 1 );
part_set_signal( p, nWBE[0], 1, 1 );
part_set_signal( p, nWBE[1], 1, 1 );
part_set_signal( p, nWBE[2], 1, 1 );
part_set_signal( p, nWBE[3], 1, 1 );
part_set_signal( p, nOE, 1, 1 );
setup_address( bus, adr );
setup_data( bus, data );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, nWBE[0], 1, 0 );
chain_shift_data_registers( chain, 0 );
part_set_signal( p, nWBE[0], 1, 1 );
part_set_signal( p, nRCS[0], 1, 1 );
part_set_signal( p, nRCS[1], 1, 1 );
part_set_signal( p, nRCS[2], 1, 1 );
part_set_signal( p, nRCS[3], 1, 1 );
part_set_signal( p, nRCS[4], 1, 1 );
part_set_signal( p, nRCS[5], 1, 1 );
chain_shift_data_registers( chain, 0 );
}
void
sa1110_bus_write( parts *ps, uint32_t adr, uint32_t data )
{
/* see Figure 10-16 in SA doc */
part *p = ps->parts[0];
if ( (adr==0x49000000) && (data==1) ) {
part_set_signal( p, "nCS0", 1, 1 );
part_set_signal( p, "nCS5", 1, 0 );
} else {
part_set_signal( p, "nCS0", 1, 0 );
part_set_signal( p, "nCS5", 1, 1 );
}
part_set_signal( p, "nCS1", 1, 1 );
part_set_signal( p, "nCS2", 1, 1 );
part_set_signal( p, "nCS3", 1, 1 );
part_set_signal( p, "nCS4", 1, 1 );
part_set_signal( p, "RD_nWR", 1, 0 );
part_set_signal( p, "nWE", 1, 1 );
part_set_signal( p, "nOE", 1, 1 );
setup_address( p, adr );
setup_data( p, data );
parts_shift_data_registers( ps );
part_set_signal( p, "nWE", 1, 0 );
parts_shift_data_registers( ps );
part_set_signal( p, "nWE", 1, 1 );
parts_shift_data_registers( ps );
part_set_signal( p, "nCS0", 1, 1 );
part_set_signal( p, "nCS5", 1, 1 );
parts_shift_data_registers( ps );
}
