unsigned int x86_pci_read_config16(pci_dev_t dev, unsigned where) { uint16_t value; pci_hose_read_config_word(get_hose(), dev, where, &value); return value; }
/* * Unlock the configuration bit so that the host system can begin booting * * This should be used after you have: * 1) Called mpc83xx_pci_init() * 2) Set up your inbound translation windows to the appropriate size */ void mpc83xx_pcislave_unlock(int bus) { struct pci_controller *hose = &pci_hose[bus]; u32 dev; u16 reg16; /* Unlock configuration lock in PCI function configuration register */ dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, ®16); reg16 &= ~(PCI_FUNCTION_CFG_LOCK); pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16); /* The configuration bit is now unlocked, so we can scan the bus */ hose->last_busno = pci_hose_scan(hose); }
void pci_mpc8250_init (struct pci_controller *hose) { u16 tempShort; volatile immap_t *immap = (immap_t *) CFG_IMMR; pci_dev_t host_devno = PCI_BDF (0, 0, 0); pci_setup_indirect (hose, CFG_IMMR + PCI_CFG_ADDR_REG, CFG_IMMR + PCI_CFG_DATA_REG); /* * Setting required to enable local bus for PCI (SIUMCR [LBPC]). */ #ifdef CONFIG_MPC8266ADS immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11) | SIUMCR_LBPC01; #elif defined CONFIG_MPC8272 immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_BBD & ~SIUMCR_ESE & ~SIUMCR_PBSE & ~SIUMCR_CDIS & ~SIUMCR_DPPC11 & ~SIUMCR_L2CPC11 & ~SIUMCR_LBPC11 & ~SIUMCR_APPC11 & ~SIUMCR_CS10PC11 & ~SIUMCR_BCTLC11 & ~SIUMCR_MMR11) | SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | SIUMCR_APPC10 | SIUMCR_CS10PC00 | SIUMCR_BCTLC00 | SIUMCR_MMR11; #elif defined(CONFIG_TQM8272) /* nothing to do for this Board here */ #else /* * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), * and local bus for PCI (SIUMCR [LBPC]). */ immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11 & ~SIUMCR_CS10PC11 & ~SIUMCR_LBPC11) | SIUMCR_LBPC01 | SIUMCR_CS10PC01 | SIUMCR_APPC10; #endif /* Make PCI lowest priority */ /* Each 4 bits is a device bus request and the MS 4bits is highest priority */ /* Bus 4bit value --- ---------- CPM high 0b0000 CPM middle 0b0001 CPM low 0b0010 PCI reguest 0b0011 Reserved 0b0100 Reserved 0b0101 Internal Core 0b0110 External Master 1 0b0111 External Master 2 0b1000 External Master 3 0b1001 The rest are reserved */ immap->im_siu_conf.sc_ppc_alrh = 0x61207893; /* Park bus on core while modifying PCI Bus accesses */ immap->im_siu_conf.sc_ppc_acr = 0x6; /* * Set up master windows that allow the CPU to access PCI space. These * windows are set up using the two SIU PCIBR registers. */ immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK; immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE; #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK; immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE; #endif /* Release PCI RST (by default the PCI RST signal is held low) */ immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN); /* give it some time */ { #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 /* Give the PCI cards more time to initialize before query This might be good for other boards also */ int i; for (i = 0; i < 1000; ++i) #endif udelay (1000); } /* * Set up master window that allows the CPU to access PCI Memory (prefetch) * space. This window is set up using the first set of Outbound ATU registers. */ immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */ immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */ immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */ /* * Set up master window that allows the CPU to access PCI Memory (non-prefetch) * space. This window is set up using the second set of Outbound ATU registers. */ immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */ immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */ immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */ /* * Set up master window that allows the CPU to access PCI IO space. This window * is set up using the third set of Outbound ATU registers. */ immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */ immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */ immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */ /* * Set up slave window that allows PCI masters to access MPC826x local memory. * This window is set up using the first set of Inbound ATU registers */ immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */ immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */ immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */ /* See above for description - puts PCI request as highest priority */ #ifdef CONFIG_MPC8272 immap->im_siu_conf.sc_ppc_alrh = 0x01236745; #else immap->im_siu_conf.sc_ppc_alrh = 0x03124567; #endif /* Park the bus on the PCI */ immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; /* Host mode - specify the bridge as a host-PCI bridge */ pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE, PCI_CLASS_BRIDGE_CTLR); /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */ pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort); pci_hose_write_config_word (hose, host_devno, PCI_COMMAND, tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); /* do some bridge init, should be done on all 8260 based bridges */ pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE, 0x08); pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER, 0xF8); hose->first_busno = 0; hose->last_busno = 0xff; /* System memory space */ #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826 pci_set_region (hose->regions + 0, PCI_SLV_MEM_BUS, PCI_SLV_MEM_LOCAL, gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY); #else pci_set_region (hose->regions + 0, CFG_SDRAM_BASE, CFG_SDRAM_BASE, 0x4000000, PCI_REGION_MEM | PCI_REGION_MEMORY); #endif /* PCI memory space */ #if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 pci_set_region (hose->regions + 1, PCI_MSTR_MEMIO_BUS, PCI_MSTR_MEMIO_LOCAL, PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM); #else pci_set_region (hose->regions + 1, PCI_MSTR_MEM_BUS, PCI_MSTR_MEM_LOCAL, PCI_MSTR_MEM_SIZE, PCI_REGION_MEM); #endif /* PCI I/O space */ pci_set_region (hose->regions + 2, PCI_MSTR_IO_BUS, PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO); hose->region_count = 3; pci_register_hose (hose); /* Mask off master abort machine checks */ immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP); eieio (); hose->last_busno = pci_hose_scan (hose); /* clear the error in the error status register */ immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP); /* unmask master abort machine checks */ immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP); }
static void pci_init_bus(int bus, struct pci_region *reg) { volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR; volatile pot83xx_t *pot = immr->ios.pot; volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus]; struct pci_controller *hose = &pci_hose[bus]; u32 dev; u16 reg16; int i; if (bus == 1) pot += 3; /* Setup outbound translation windows */ for (i = 0; i < 3; i++, reg++, pot++) { if (reg->size == 0) break; hose->regions[i] = *reg; hose->region_count++; pot->potar = reg->bus_start >> 12; pot->pobar = reg->phys_start >> 12; pot->pocmr = ~(reg->size - 1) >> 12; if (reg->flags & PCI_REGION_IO) pot->pocmr |= POCMR_IO; #ifdef CONFIG_83XX_PCI_STREAMING else if (reg->flags & PCI_REGION_PREFETCH) pot->pocmr |= POCMR_SE; #endif if (bus == 1) pot->pocmr |= POCMR_DST; pot->pocmr |= POCMR_EN; } /* Point inbound translation at RAM */ pci_ctrl->pitar1 = 0; pci_ctrl->pibar1 = 0; pci_ctrl->piebar1 = 0; pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1)); i = hose->region_count++; hose->regions[i].bus_start = 0; hose->regions[i].phys_start = 0; hose->regions[i].size = gd->ram_size; hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY; hose->first_busno = pci_last_busno() + 1; hose->last_busno = 0xff; pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80, CONFIG_SYS_IMMR + 0x8304 + bus * 0x80); pci_register_hose(hose); /* * Write to Command register */ reg16 = 0xff; dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); #ifdef CONFIG_PCI_SCAN_SHOW printf("PCI: Bus Dev VenId DevId Class Int\n"); #endif #ifndef CONFIG_PCISLAVE /* * Hose scan. */ hose->last_busno = pci_hose_scan(hose); #endif }
void pciauto_setup_device(struct pci_controller *hose, pci_dev_t dev, int bars_num, struct pci_region *mem, struct pci_region *prefetch, struct pci_region *io) { u32 bar_response; pci_size_t bar_size; u16 cmdstat = 0; int bar, bar_nr = 0; #ifndef CONFIG_PCI_ENUM_ONLY pci_addr_t bar_value; struct pci_region *bar_res; int found_mem64 = 0; #endif pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat); cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER; for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) { /* Tickle the BAR and get the response */ #ifndef CONFIG_PCI_ENUM_ONLY pci_hose_write_config_dword(hose, dev, bar, 0xffffffff); #endif pci_hose_read_config_dword(hose, dev, bar, &bar_response); /* If BAR is not implemented go to the next BAR */ if (!bar_response) continue; #ifndef CONFIG_PCI_ENUM_ONLY found_mem64 = 0; #endif /* Check the BAR type and set our address mask */ if (bar_response & PCI_BASE_ADDRESS_SPACE) { bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK)) & 0xffff) + 1; #ifndef CONFIG_PCI_ENUM_ONLY bar_res = io; #endif DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size); } else { if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == PCI_BASE_ADDRESS_MEM_TYPE_64) { u32 bar_response_upper; u64 bar64; #ifndef CONFIG_PCI_ENUM_ONLY pci_hose_write_config_dword(hose, dev, bar + 4, 0xffffffff); #endif pci_hose_read_config_dword(hose, dev, bar + 4, &bar_response_upper); bar64 = ((u64)bar_response_upper << 32) | bar_response; bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1; #ifndef CONFIG_PCI_ENUM_ONLY found_mem64 = 1; #endif } else { bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1); } #ifndef CONFIG_PCI_ENUM_ONLY if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH)) bar_res = prefetch; else bar_res = mem; #endif DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size); } #ifndef CONFIG_PCI_ENUM_ONLY if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) { /* Write it out and update our limit */ pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value); if (found_mem64) { bar += 4; #ifdef CONFIG_SYS_PCI_64BIT pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32)); #else /* * If we are a 64-bit decoder then increment to the * upper 32 bits of the bar and force it to locate * in the lower 4GB of memory. */ pci_hose_write_config_dword(hose, dev, bar, 0x00000000); #endif } } #endif cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ? PCI_COMMAND_IO : PCI_COMMAND_MEMORY; DEBUGF("\n"); bar_nr++; }
/************************************************************************** * pci_init_board() * * NOTICE: PCI2 is not supported. There is only one * physical PCI slot on the board. * */ void pci_init_board(void) { volatile immap_t * immr; volatile clk83xx_t * clk; volatile law83xx_t * pci_law; volatile pot83xx_t * pci_pot; volatile pcictrl83xx_t * pci_ctrl; volatile pciconf83xx_t * pci_conf; u16 reg16; u32 reg32; u32 dev; struct pci_controller * hose; immr = (immap_t *)CONFIG_SYS_IMMR; clk = (clk83xx_t *)&immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; pci_conf = immr->pci_conf; hose = &pci_hose[0]; /* * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode */ reg32 = clk->occr; udelay(2000); clk->occr = 0xff000000; udelay(2000); /* * Release PCI RST Output signal */ pci_ctrl[0].gcr = 0; udelay(2000); pci_ctrl[0].gcr = 1; #ifdef CONFIG_MPC83XX_PCI2 pci_ctrl[1].gcr = 0; udelay(2000); pci_ctrl[1].gcr = 1; #endif /* We need to wait at least a 1sec based on PCI specs */ { int i; for (i = 0; i < 1000; ++i) udelay (1000); } /* * Configure PCI Local Access Windows */ pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M; /* * Configure PCI Outbound Translation Windows */ /* PCI1 mem space - prefetch */ pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); /* PCI1 IO space */ pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); /* PCI1 mmio - non-prefetch mem space */ pci_pot[2].potar = (CONFIG_SYS_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK; pci_pot[2].pobar = (CONFIG_SYS_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK); /* * Configure PCI Inbound Translation Windows */ /* we need RAM mapped to PCI space for the devices to * access main memory */ pci_ctrl[0].pitar1 = 0x0; pci_ctrl[0].pibar1 = 0x0; pci_ctrl[0].piebar1 = 0x0; pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); hose->first_busno = 0; hose->last_busno = 0xff; /* PCI memory prefetch space */ pci_set_region(hose->regions + 0, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM|PCI_REGION_PREFETCH); /* PCI memory space */ pci_set_region(hose->regions + 1, CONFIG_SYS_PCI1_MMIO_BASE, CONFIG_SYS_PCI1_MMIO_PHYS, CONFIG_SYS_PCI1_MMIO_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose->regions + 2, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose->regions + 3, CONFIG_PCI_SYS_MEM_BUS, CONFIG_PCI_SYS_MEM_PHYS, gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); hose->region_count = 4; pci_setup_indirect(hose, (CONFIG_SYS_IMMR+0x8300), (CONFIG_SYS_IMMR+0x8304)); pci_register_hose(hose); /* * Write to Command register */ reg16 = 0xff; dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); #ifdef CONFIG_PCI_SCAN_SHOW printf("PCI: Bus Dev VenId DevId Class Int\n"); #endif /* * Hose scan. */ hose->last_busno = pci_hose_scan(hose); #ifdef CONFIG_MPC83XX_PCI2 hose = &pci_hose[1]; /* * Configure PCI Outbound Translation Windows */ /* PCI2 mem space - prefetch */ pci_pot[3].potar = (CONFIG_SYS_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[3].pobar = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK); /* PCI2 IO space */ pci_pot[4].potar = (CONFIG_SYS_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[4].pobar = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK); /* PCI2 mmio - non-prefetch mem space */ pci_pot[5].potar = (CONFIG_SYS_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK; pci_pot[5].pobar = (CONFIG_SYS_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK); /* * Configure PCI Inbound Translation Windows */ /* we need RAM mapped to PCI space for the devices to * access main memory */ pci_ctrl[1].pitar1 = 0x0; pci_ctrl[1].pibar1 = 0x0; pci_ctrl[1].piebar1 = 0x0; pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); hose->first_busno = pci_hose[0].last_busno + 1; hose->last_busno = 0xff; /* PCI memory prefetch space */ pci_set_region(hose->regions + 0, CONFIG_SYS_PCI2_MEM_BASE, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_SIZE, PCI_REGION_MEM|PCI_REGION_PREFETCH); /* PCI memory space */ pci_set_region(hose->regions + 1, CONFIG_SYS_PCI2_MMIO_BASE, CONFIG_SYS_PCI2_MMIO_PHYS, CONFIG_SYS_PCI2_MMIO_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose->regions + 2, CONFIG_SYS_PCI2_IO_BASE, CONFIG_SYS_PCI2_IO_PHYS, CONFIG_SYS_PCI2_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose->regions + 3, CONFIG_PCI_SYS_MEM_BUS, CONFIG_PCI_SYS_MEM_PHYS, gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); hose->region_count = 4; pci_setup_indirect(hose, (CONFIG_SYS_IMMR+0x8380), (CONFIG_SYS_IMMR+0x8384)); pci_register_hose(hose); /* * Write to Command register */ reg16 = 0xff; dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); /* * Hose scan. */ hose->last_busno = pci_hose_scan(hose); #endif }
void pci_mpc83xx_init(volatile struct pci_controller *hose) { volatile immap_t * immr; volatile clk8349_t * clk; volatile law8349_t * pci_law; volatile pot8349_t * pci_pot; volatile pcictrl8349_t * pci_ctrl; volatile pciconf8349_t * pci_conf; u8 val8,tmp8,ret; u16 reg16,tmp16; u32 val32,tmp32; immr = (immap_t *)CFG_IMMRBAR; clk = (clk8349_t *)&immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; pci_conf = immr->pci_conf; /* * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode */ val32 = clk->occr; udelay(2000); clk->occr = 0xff000000; udelay(2000); /* * Configure PCI Local Access Windows */ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; /* * Configure PCI Outbound Translation Windows */ pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK); /* mapped to PCI1 IO space 0x0 to local 0xe2000000 */ pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK); pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[3].pocmr = POCMR_EN | POCMR_DST | (POCMR_CM_512M & POCMR_CM_MASK); /* mapped to PCI2 IO space 0x0 to local 0xe3000000 */ pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[4].pocmr = POCMR_EN | POCMR_DST | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK); /* * Configure PCI Inbound Translation Windows */ pci_ctrl[0].pitar1 = 0x0; pci_ctrl[0].pibar1 = 0x0; pci_ctrl[0].piebar1 = 0x0; pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; pci_ctrl[1].pitar1 = 0x0; pci_ctrl[1].pibar1 = 0x0; pci_ctrl[1].piebar1 = 0x0; pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; /* * Assign PIB PMC slot to desired PCI bus */ #ifdef CONFIG_MPC8349ADS mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET); i2c_init(CFG_I2C_SPEED,CFG_I2C_SLAVE); #endif val8 = 0; ret = i2c_write(0x23,0x6,1,&val8,1); ret = i2c_write(0x23,0x7,1,&val8,1); val8 = 0xff; ret = i2c_write(0x23,0x2,1,&val8,1); ret = i2c_write(0x23,0x3,1,&val8,1); val8 = 0; ret = i2c_write(0x26,0x6,1,&val8,1); val8 = 0x34; ret = i2c_write(0x26,0x7,1,&val8,1); #if defined(PCI_64BIT) val8 = 0xf4; /* PMC2<->PCI1 64bit */ #elif defined(PCI_ALL_PCI1) val8 = 0xf3; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI1 32bit */ #elif defined(PCI_ONE_PCI1) val8 = 0xf9; /* PMC1<->PCI1,PMC2<->PCI2,PMC3<->PCI2 32bit */ #elif defined(PCI_TWO_PCI1) val8 = 0xf5; /* PMC1<->PCI1,PMC2<->PCI1,PMC3<->PCI2 32bit */ #else val8 = 0xf5; #endif ret = i2c_write(0x26,0x2,1,&val8,1); val8 = 0xff; ret = i2c_write(0x26,0x3,1,&val8,1); val8 = 0; ret = i2c_write(0x27,0x6,1,&val8,1); ret = i2c_write(0x27,0x7,1,&val8,1); val8 = 0xff; ret = i2c_write(0x27,0x2,1,&val8,1); val8 = 0xef; ret = i2c_write(0x27,0x3,1,&val8,1); asm("eieio"); /* * Release PCI RST Output signal */ udelay(2000); pci_ctrl[0].gcr = 1; #ifndef PCI_64BIT pci_ctrl[1].gcr = 1; #endif udelay(2000); hose[0].first_busno = 0; hose[0].last_busno = 0xff; pci_set_region(hose[0].regions + 0, CFG_PCI1_MEM_BASE, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose[0].regions + 1, CFG_PCI1_IO_BASE, CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO); hose[0].region_count = 2; pci_setup_indirect(&hose[0], (CFG_IMMRBAR+0x8300), (CFG_IMMRBAR+0x8304)); #define PCI_CLASS_BRIDGE 0x06 reg16 = 0xff; tmp32 = 0xffff; pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE); pci_hose_read_config_word (&hose[0],PCI_BDF(0,0,0),PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(&hose[0],PCI_BDF(0,0,0), PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(&hose[0],PCI_BDF(0,0,0), PCI_STATUS, 0xffff); pci_hose_write_config_byte(&hose[0],PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80); #ifndef PCI_64BIT hose[1].first_busno = 0; hose[1].last_busno = 0xff; pci_set_region(hose[1].regions + 0, CFG_PCI2_MEM_BASE, CFG_PCI2_MEM_PHYS, CFG_PCI2_MEM_SIZE, PCI_REGION_MEM); pci_set_region(hose[1].regions + 1, CFG_PCI2_IO_BASE, CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO); hose[1].region_count = 2; pci_setup_indirect(&hose[1], (CFG_IMMRBAR+0x8380), (CFG_IMMRBAR+0x8384)); pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0),PCI_CLASS_CODE,PCI_CLASS_BRIDGE); pci_hose_read_config_word (&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(&hose[1],PCI_BDF(0,0,0), PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(&hose[1],PCI_BDF(0,0,0), PCI_STATUS, 0xffff); pci_hose_write_config_byte(&hose[1],PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80); #endif #if defined(PCI_64BIT) printf("PCI1 64bit on PMC2\n"); #elif defined(PCI_ALL_PCI1) printf("PCI1 32bit on PMC1 & PMC2 & PMC3\n"); #elif defined(PCI_ONE_PCI1) printf("PCI1 32bit on PMC1,PCI2 32bit on PMC2 & PMC3\n"); #else printf("PCI1 32bit on PMC1 & PMC2 & PMC3 in default\n"); #endif #if 1 /* * Hose scan. */ pci_register_hose(hose); hose->last_busno = pci_hose_scan(hose); #endif }
/************************************************************************** * pci_init_board() * */ void pci_init_board(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile law512x_t *pci_law; volatile pot512x_t *pci_pot; volatile pcictrl512x_t *pci_ctrl; volatile pciconf512x_t *pci_conf; u16 reg16; u32 reg32; u32 dev; int i; struct pci_controller *hose; /* Set PCI divider for 33MHz */ reg32 = in_be32(&im->clk.scfr[0]); reg32 &= ~(SCFR1_PCI_DIV_MASK); reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT; out_be32(&im->clk.scfr[0], reg32); clrsetbits_be32(&im->clk.scfr[0], SCFR1_PCI_DIV_MASK, SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT ); pci_law = im->sysconf.pcilaw; pci_pot = im->ios.pot; pci_ctrl = &im->pci_ctrl; pci_conf = &im->pci_conf; hose = &pci_hose; /* * Release PCI RST Output signal */ out_be32(&pci_ctrl->gcr, 0); udelay(2000); out_be32(&pci_ctrl->gcr, 1); /* We need to wait at least a 1sec based on PCI specs */ for (i = 0; i < 1000; i++) udelay(1000); /* * Configure PCI Local Access Windows */ out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR); out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M); out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR); out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M); /* * Configure PCI Outbound Translation Windows */ /* PCI mem space - prefetch */ out_be32(&pci_pot[0].potar, (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK); out_be32(&pci_pot[0].pobar, (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK); out_be32(&pci_pot[0].pocmr, POCMR_EN | POCMR_PRE | POCMR_CM_256M); /* PCI IO space */ out_be32(&pci_pot[1].potar, (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK); out_be32(&pci_pot[1].pobar, (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK); out_be32(&pci_pot[1].pocmr, POCMR_EN | POCMR_IO | POCMR_CM_16M); /* PCI mmio - non-prefetch mem space */ out_be32(&pci_pot[2].potar, (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK); out_be32(&pci_pot[2].pobar, (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK); out_be32(&pci_pot[2].pocmr, POCMR_EN | POCMR_CM_256M); /* * Configure PCI Inbound Translation Windows */ /* we need RAM mapped to PCI space for the devices to * access main memory */ out_be32(&pci_ctrl[0].pitar1, 0x0); out_be32(&pci_ctrl[0].pibar1, 0x0); out_be32(&pci_ctrl[0].piebar1, 0x0); out_be32(&pci_ctrl[0].piwar1, PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1)); hose->first_busno = 0; hose->last_busno = 0xff; /* PCI memory prefetch space */ pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BASE, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM|PCI_REGION_PREFETCH); /* PCI memory space */ pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_MMIO_BASE, CONFIG_SYS_PCI_MMIO_PHYS, CONFIG_SYS_PCI_MMIO_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_IO_BASE, CONFIG_SYS_PCI_IO_PHYS, CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose->regions + 3, CONFIG_PCI_SYS_MEM_BUS, CONFIG_PCI_SYS_MEM_PHYS, gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); hose->region_count = 4; pci_setup_indirect(hose, (CONFIG_SYS_IMMR + 0x8300), (CONFIG_SYS_IMMR + 0x8304)); pci_register_hose(hose); /* * Write to Command register */ reg16 = 0xff; dev = PCI_BDF(hose->first_busno, 0, 0); pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); #ifdef CONFIG_PCI_SCAN_SHOW printf("PCI: Bus Dev VenId DevId Class Int\n"); #endif /* * Hose scan. */ hose->last_busno = pci_hose_scan(hose); }
/********************************************************************** * pci_init_board() *********************************************************************/ void pci_init_board(void) #ifdef CONFIG_PCISLAVE { u16 reg16; volatile immap_t *immr; volatile law83xx_t *pci_law; volatile pot83xx_t *pci_pot; volatile pcictrl83xx_t *pci_ctrl; volatile pciconf83xx_t *pci_conf; immr = (immap_t *) CFG_IMMR; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; pci_conf = immr->pci_conf; /* * Configure PCI Inbound Translation Windows */ pci_ctrl[0].pitar0 = 0x0; pci_ctrl[0].pibar0 = 0x0; pci_ctrl[0].piwar0 = PIWAR_EN | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_4K; pci_ctrl[0].pitar1 = 0x0; pci_ctrl[0].pibar1 = 0x0; pci_ctrl[0].piebar1 = 0x0; pci_ctrl[0].piwar1 &= ~PIWAR_EN; pci_ctrl[0].pitar2 = 0x0; pci_ctrl[0].pibar2 = 0x0; pci_ctrl[0].piebar2 = 0x0; pci_ctrl[0].piwar2 &= ~PIWAR_EN; hose[0].first_busno = 0; hose[0].last_busno = 0xff; pci_setup_indirect(&hose[0], (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304)); reg16 = 0xff; pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MEMORY; pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), PCI_STATUS, 0xffff); pci_hose_write_config_byte(&hose[0], PCI_BDF(0, 0, 0), PCI_LATENCY_TIMER, 0x80); /* * Unlock configuration lock in PCI function configuration register. */ pci_hose_read_config_word(&hose[0], PCI_BDF(0, 0, 0), PCI_FUNCTION_CONFIG, ®16); reg16 &= ~(PCI_FUNCTION_CFG_LOCK); pci_hose_write_config_word(&hose[0], PCI_BDF(0, 0, 0), PCI_FUNCTION_CONFIG, reg16); printf("Enabled PCI 32bit Agent Mode\n"); }
/************************************************************************** * pci_init_board() * * NOTICE: MPC8349 internally has two PCI controllers (PCI1 and PCI2) but since * per TQM834x design physical connections to external devices (PCI sockets) * are routed only to the PCI1 we do not account for the second one - this code * supports PCI1 module only. Should support for the PCI2 be required in the * future it needs a separate pci_controller structure (above) and handling - * please refer to other boards' implementation for dual PCI host controllers, * for example board/Marvell/db64360/pci.c, pci_init_board() * */ void pci_init_board(void) { volatile immap_t * immr; volatile clk83xx_t * clk; volatile law83xx_t * pci_law; volatile pot83xx_t * pci_pot; volatile pcictrl83xx_t * pci_ctrl; volatile pciconf83xx_t * pci_conf; u16 reg16; u32 reg32; struct pci_controller * hose; immr = (immap_t *)CONFIG_SYS_IMMR; clk = (clk83xx_t *)&immr->clk; pci_law = immr->sysconf.pcilaw; pci_pot = immr->ios.pot; pci_ctrl = immr->pci_ctrl; pci_conf = immr->pci_conf; hose = &pci1_hose; /* * Configure PCI controller and PCI_CLK_OUTPUT */ /* * WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one * line actually used for clocking all external PCI devices in TQM83xx. * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for * unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7 * are known to hang the board; this issue is under investigation * (13 oct 05) */ reg32 = OCCR_PCICOE1; #if 0 /* enabling all PCI_CLK_OUTPUT lines HANGS the board... */ reg32 = 0xff000000; #endif if (clk->spmr & SPMR_CKID) { /* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR * fields accordingly */ reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR); reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \ | OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \ | OCCR_PCICD6 | OCCR_PCICD7); } clk->occr = reg32; udelay(2000); /* * Release PCI RST Output signal */ pci_ctrl[0].gcr = 0; udelay(2000); pci_ctrl[0].gcr = 1; udelay(2000); /* * Configure PCI Local Access Windows */ pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR; pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M; /* * Configure PCI Outbound Translation Windows */ /* PCI1 mem space */ pci_pot[0].potar = (CONFIG_SYS_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; pci_pot[0].pobar = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK); /* PCI1 IO space */ pci_pot[1].potar = (CONFIG_SYS_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; pci_pot[1].pobar = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK); /* * Configure PCI Inbound Translation Windows */ /* we need RAM mapped to PCI space for the devices to * access main memory */ pci_ctrl[0].pitar1 = 0x0; pci_ctrl[0].pibar1 = 0x0; pci_ctrl[0].piebar1 = 0x0; pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_256M; hose->first_busno = 0; hose->last_busno = 0xff; /* PCI memory space */ pci_set_region(hose->regions + 0, CONFIG_SYS_PCI1_MEM_BASE, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM); /* PCI IO space */ pci_set_region(hose->regions + 1, CONFIG_SYS_PCI1_IO_BASE, CONFIG_SYS_PCI1_IO_PHYS, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO); /* System memory space */ pci_set_region(hose->regions + 2, CONFIG_PCI_SYS_MEM_BUS, CONFIG_PCI_SYS_MEM_PHYS, CONFIG_PCI_SYS_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY); hose->region_count = 3; pci_setup_indirect(hose, (CONFIG_SYS_IMMR+0x8300), (CONFIG_SYS_IMMR+0x8304)); pci_register_hose(hose); /* * Write to Command register */ reg16 = 0xff; pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND, ®16); reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND, reg16); /* * Clear non-reserved bits in status register. */ pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS, 0xffff); pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER, 0x80); #ifdef CONFIG_PCI_SCAN_SHOW printf("PCI: Bus Dev VenId DevId Class Int\n"); #endif /* * Hose scan. */ hose->last_busno = pci_hose_scan(hose); }