Esempio n. 1
0
int mlx5_sriov_init(struct mlx5_core_dev *dev)
{
	struct mlx5_core_sriov *sriov = &dev->priv.sriov;
	struct pci_dev *pdev = dev->pdev;
	int cur_vfs;

	if (!mlx5_core_is_pf(dev))
		return 0;

	if (!sync_required(dev->pdev))
		return 0;

	cur_vfs = pci_num_vf(pdev);
	sriov->vfs_ctx = kcalloc(cur_vfs, sizeof(*sriov->vfs_ctx), GFP_KERNEL);
	if (!sriov->vfs_ctx)
		return -ENOMEM;

	sriov->enabled_vfs = cur_vfs;

	mlx5_core_init_vfs(dev, cur_vfs);
#ifdef CONFIG_MLX5_CORE_EN
	if (cur_vfs)
		mlx5_eswitch_enable_sriov(dev->priv.eswitch, cur_vfs,
					  SRIOV_LEGACY);
#endif

	enable_vfs(dev, cur_vfs);

	return 0;
}
Esempio n. 2
0
static int nitrox_sriov_enable(struct pci_dev *pdev, int num_vfs)
{
	struct nitrox_device *ndev = pci_get_drvdata(pdev);
	int err;

	if (!num_vfs_valid(num_vfs)) {
		dev_err(DEV(ndev), "Invalid num_vfs %d\n", num_vfs);
		return -EINVAL;
	}

	if (pci_num_vf(pdev) == num_vfs)
		return num_vfs;

	err = pci_enable_sriov(pdev, num_vfs);
	if (err) {
		dev_err(DEV(ndev), "failed to enable PCI sriov %d\n", err);
		return err;
	}
	dev_info(DEV(ndev), "Enabled VF(s) %d\n", num_vfs);

	ndev->num_vfs = num_vfs;
	ndev->mode = num_vfs_to_mode(num_vfs);
	/* set bit in flags */
	set_bit(__NDEV_SRIOV_BIT, &ndev->flags);

	/* cleanup PF resources */
	pf_sriov_cleanup(ndev);

	config_nps_core_vfcfg_mode(ndev, ndev->mode);

	return num_vfs;
}
Esempio n. 3
0
static int sync_required(struct pci_dev *pdev)
{
	struct mlx5_core_dev *dev  = pci_get_drvdata(pdev);
	struct mlx5_core_sriov *sriov = &dev->priv.sriov;
	int cur_vfs = pci_num_vf(pdev);

	if (cur_vfs != sriov->num_vfs) {
		pr_info("current VFs %d, registered %d - sync needed\n", cur_vfs, sriov->num_vfs);
		return 1;
	}

	return 0;
}
Esempio n. 4
0
File: sriov.c Progetto: Lyude/linux
static int mlx5_pci_enable_sriov(struct pci_dev *pdev, int num_vfs)
{
	struct mlx5_core_dev *dev  = pci_get_drvdata(pdev);
	int err = 0;

	if (pci_num_vf(pdev)) {
		mlx5_core_warn(dev, "Unable to enable pci sriov, already enabled\n");
		return -EBUSY;
	}

	err = pci_enable_sriov(pdev, num_vfs);
	if (err)
		mlx5_core_warn(dev, "pci_enable_sriov failed : %d\n", err);

	return err;
}
Esempio n. 5
0
File: sriov.c Progetto: Lyude/linux
int mlx5_sriov_init(struct mlx5_core_dev *dev)
{
	struct mlx5_core_sriov *sriov = &dev->priv.sriov;
	struct pci_dev *pdev = dev->pdev;
	int total_vfs;

	if (!mlx5_core_is_pf(dev))
		return 0;

	total_vfs = pci_sriov_get_totalvfs(pdev);
	sriov->num_vfs = pci_num_vf(pdev);
	sriov->vfs_ctx = kcalloc(total_vfs, sizeof(*sriov->vfs_ctx), GFP_KERNEL);
	if (!sriov->vfs_ctx)
		return -ENOMEM;

	return 0;
}
Esempio n. 6
0
static ssize_t
store_max_vfs(struct device *dev, struct device_attribute *attr,
	      const char *buf, size_t count)
{
	int err = 0;
	unsigned long max_vfs;
	struct pci_dev *pdev = to_pci_dev(dev);

	if (0 != kstrtoul(buf, 0, &max_vfs))
		return -EINVAL;

	if (0 == max_vfs)
		pci_disable_sriov(pdev);
	else if (0 == pci_num_vf(pdev))
		err = pci_enable_sriov(pdev, max_vfs);
	else /* do nothing if change max_vfs number */
		err = -EINVAL;

	return err ? err : count;
}
Esempio n. 7
0
void efx_ef10_sriov_fini(struct efx_nic *efx)
{
#ifdef CONFIG_SFC_SRIOV
	struct efx_ef10_nic_data *nic_data = efx->nic_data;
	unsigned int i;
	int rc;

	if (!nic_data->vf) {
		/* Remove any un-assigned orphaned VFs */
#if !defined(EFX_USE_KCOMPAT) || defined(EFX_HAVE_PCI_DEV_FLAGS_ASSIGNED)
		if (pci_num_vf(efx->pci_dev) && !pci_vfs_assigned(efx->pci_dev))
#endif
			pci_disable_sriov(efx->pci_dev);
		return;
	}

	/* Remove any VFs in the host */
	for (i = 0; i < efx->vf_count; ++i) {
		struct efx_nic *vf_efx = nic_data->vf[i].efx;

		if (vf_efx) {
			efx_device_detach_sync(vf_efx);
			rtnl_lock();
			efx_net_stop(vf_efx->net_dev);
			rtnl_unlock();
			down_write(&vf_efx->filter_sem);
			vf_efx->type->filter_table_remove(vf_efx);
			up_write(&vf_efx->filter_sem);
			efx_ef10_vadaptor_free(vf_efx, EVB_PORT_ID_ASSIGNED);
			vf_efx->pci_dev->driver->remove(vf_efx->pci_dev);
		}
	}

	rc = efx_ef10_pci_sriov_disable(efx, true);
	if (rc)
		netif_dbg(efx, drv, efx->net_dev, "Disabling SRIOV was not successful rc=%d\n", rc);
	else
		netif_dbg(efx, drv, efx->net_dev, "SRIOV disabled\n");
#endif
}
Esempio n. 8
0
void bnxt_sriov_disable(struct bnxt *bp)
{
	u16 num_vfs = pci_num_vf(bp->pdev);

	if (!num_vfs)
		return;

	if (pci_vfs_assigned(bp->pdev)) {
		netdev_warn(bp->dev, "Unable to free %d VFs because some are assigned to VMs.\n",
			    num_vfs);
	} else {
		pci_disable_sriov(bp->pdev);
		/* Free the HW resources reserved for various VF's */
		bnxt_hwrm_func_vf_resource_free(bp, num_vfs);
	}

	bnxt_free_vf_resources(bp);

	bp->pf.active_vfs = 0;
	/* Reclaim all resources for the PF. */
	bnxt_hwrm_func_qcaps(bp);
}
Esempio n. 9
0
static int mlx5_core_create_vfs(struct pci_dev *pdev, int num_vfs)
{
	struct mlx5_core_dev *dev  = pci_get_drvdata(pdev);
	int err;

	if (pci_num_vf(pdev))
		pci_disable_sriov(pdev);

	enable_vfs(dev, num_vfs);

	err = pci_enable_sriov(pdev, num_vfs);
	if (err) {
		dev_warn(&pdev->dev, "enable sriov failed %d\n", err);
		goto ex;
	}

	return 0;

ex:
	disable_vfs(dev, num_vfs);
	return err;
}