Esempio n. 1
1
void CTeris_1View::DrawXX(CDC *pDC)
{
	CRect   rect; 
	GetClientRect(&rect); 
	CDC dcMem;      //用于缓冲作图的内存DC 
	dcMem.CreateCompatibleDC(pDC);      //依附窗口DC创建兼容内存DC
	CBitmap     bmp; //内存中承载临时图象的位图
	bmp.CreateCompatibleBitmap(pDC, rect.Width() , rect.Height() ); //创建兼容位图 
	dcMem.SelectObject(&bmp); //将位图选择进内存DC 
	dcMem.FillSolidRect(rect, pDC->GetBkColor()); //
	
	CTeris_1Doc* pDoc = GetDocument();
	CBox *tmp=NULL;
	
	tmp=(CBox *)pDoc->box.GetAt(0);
	tmp->Draw(&dcMem);
	CString score;
	score.Format("得分:%d",pDoc->score);
	dcMem.SelectStockObject(NULL_BRUSH);
	CPen pen2(PS_SOLID,2,DARKGREEN);
	dcMem.SelectObject(&pen2);
	CString s;
	s.Format("最高记录:%s %d分",TopName,topNum);
	dcMem.TextOut(465,280,s);
	dcMem.TextOut(500,300,score);
	if(xmxxscore>0){
		
	s.Format("%d个 %d分",xmxxscore,xmxxscore*xmxxscore*5);
	dcMem.TextOut(150,100,s);
	}else if(xmxxscore<0){
		xmxxscore=-xmxxscore;
		s.Format("剩余%d个 ,额外奖励%d分",xmxxscore,GetXXOverScore(xmxxscore) );
	dcMem.TextOut(150,100,s);
	
	
	}
	dcMem.TextOut(500,500,"By yaolong.");
	dcMem.TextOut(500,520,"2013/12/28.");
	//dcMem.TextOut(465,400,"开始、暂停请按ENTER");
    s.Format("     本关要求:%d",(this->XMXXSCORE()));
	dcMem.TextOut(465,250,s);
	dcMem.Rectangle(450,0,620,200);
	dcMem.Rectangle(450,0,620,569);
	
	pDC->BitBlt(0,0,rect.Width(),rect.Height(), &dcMem ,0,0,SRCCOPY); 
	dcMem.DeleteDC(); //删除DC 
	bmp.DeleteObject(); //删除位图 
	
}
Esempio n. 2
1
void CTeris_1View::DrawBox(CDC *pDC)
{
	CRect   rect; 
	GetClientRect(&rect); 
	CDC dcMem;      //用于缓冲作图的内存DC 
	dcMem.CreateCompatibleDC(pDC);      //依附窗口DC创建兼容内存DC
	CBitmap     bmp; //内存中承载临时图象的位图
	bmp.CreateCompatibleBitmap(pDC, rect.Width() , rect.Height() ); //创建兼容位图 
	dcMem.SelectObject(&bmp); //将位图选择进内存DC 
	dcMem.FillSolidRect(rect, pDC->GetBkColor()); //
	
	CTeris_1Doc* pDoc = GetDocument();
	CBox *tmp=NULL;
	for(int i=0;i<pDoc->box.GetSize();i++){
		tmp=(CBox *)pDoc->box.GetAt(i);
		tmp->Draw(&dcMem);
	}
	CString score;
	score.Format("得分:%d",pDoc->score);
	dcMem.SelectStockObject(NULL_BRUSH);
	CPen pen2(PS_SOLID,2,DARKGREEN);
	dcMem.SelectObject(&pen2);
	CString s;
	s.Format("最高记录:%s %d分",TopName,topNum);
	dcMem.TextOut(465,280,s);
	//	dcMem.TextOut(500,290,topNum);
	dcMem.TextOut(500,300,score);
	dcMem.TextOut(500,500,"By yaolong.");
	dcMem.TextOut(500,520,"2013/12/21.");
	dcMem.TextOut(465,400,"开始、暂停请按ENTER");
    s.Format("     用时:%d",(GetDocument()->tick));
	dcMem.TextOut(465,250,s);
	dcMem.Rectangle(450,0,620,200);
	dcMem.Rectangle(450,0,620,569);
	if(GetDocument()->mode==CXY)
		dcMem.Rectangle(0,12*(  (CBox *)pDoc->box.GetAt(0)  )->LOCAL[0][0].halfSize,WNUMBER*2*(  (CBox *)pDoc->box.GetAt(0)  )->LOCAL[0][0].halfSize,12*(  (CBox *)pDoc->box.GetAt(0)  )->LOCAL[0][0].halfSize+1)
		;
	
	pDC->BitBlt(0,0,rect.Width(),rect.Height(), &dcMem ,0,0,SRCCOPY); 
	dcMem.DeleteDC(); //删除DC 
	bmp.DeleteObject(); //删除位图 
	
	
}
Esempio n. 3
0
void ChartWidget::paintEvent(QPaintEvent*)
{
    QPainter painter(this);
    painter.setWindow(0,0,width(),height());
    painter.eraseRect(0,0,width(),height());

    QPen pen0(Qt::SolidLine);
    pen0.setColor(palette().color(QPalette::Window));
    painter.setPen(pen0);
    painter.drawRect(0,0,width(),height());

    QPen pen1(Qt::DashDotLine);
    pen1.setColor(palette().color(QPalette::Mid));
    painter.setPen(pen1);
    painter.drawLine(0,height()/2,width(),height()/2);

    for (int i=10;i<m_polygon.count();i+=10)
    {
        painter.drawLine(m_polygon[i].x(),0,m_polygon[i].x(),height());
    }

    QPen pen2(Qt::SolidLine);
    pen2.setColor(palette().color(QPalette::Dark));
    painter.setPen(pen2);

    painter.drawEllipse(m_plyIndicator,height()/2-2,3,3);

    painter.setRenderHints(QPainter::Antialiasing);
    painter.drawPolyline(m_polygon);
}
Esempio n. 4
0
void Na2DViewer::paintCrosshair(QPainter& painter)
{
    float scale = defaultScale * cameraModel.scale();
    QBrush brush1(Qt::black);
    QBrush brush2(QColor(255, 255, 180));
    QPen pen1(brush1, 2.0/scale);
    QPen pen2(brush2, 1.0/scale);
    // qDebug() << "paint crosshair";
    // Q: Why all this complicated math instead of just [width()/2, height()/2]?
    // A: This helps debug/document placement of image focus
    qreal w2 = (pixmap.width() - 1.0) / 2.0; // origin at pixel center, not corner
    qreal h2 = (pixmap.height() - 1.0) / 2.0; // origin at pixel center, not corner
    qreal cx = w2 + flip_X * (cameraModel.focus().x() - w2) + 0.5;
    qreal cy = h2 + flip_Y * (cameraModel.focus().y() - h2) + 0.5;
    QPointF f(cx, cy);
    QPointF dx1(4.0 / scale, 0);
    QPointF dy1(0, 4.0 / scale);
    QPointF dx2(10.0 / scale, 0); // crosshair size is ten pixels
    QPointF dy2(0, 10.0 / scale);
    painter.setPen(pen1);
    painter.drawLine(f + dx1, f + dx2);
    painter.drawLine(f - dx1, f - dx2);
    painter.drawLine(f + dy1, f + dy2);
    painter.drawLine(f - dy1, f - dy2);
    painter.setPen(pen2);
    painter.drawLine(f + dx1, f + dx2);
    painter.drawLine(f - dx1, f - dx2);
    painter.drawLine(f + dy1, f + dy2);
    painter.drawLine(f - dy1, f - dy2);
}
Esempio n. 5
0
void ParupaintColorWheel::paintEvent(QPaintEvent * event)
{
	// QSS won't do much stuff.
	
	const qreal max_ratio = (qreal)(this->rect().width() > this->rect().height() ? this->rect().height() : this->rect().width())/2.0;
	QPoint rp = QPoint(max_ratio - wheel_width/2, max_ratio - wheel_width/2);
	QRect rr = QRect(this->rect().center() - rp, 
			this->rect().center() + rp);

	QPainter paint(this);
	QConicalGradient gradient;
	gradient.setCenter(this->rect().center());
	gradient.setAngle(-90);
	for(qreal i = 0; i <= 1; i += 0.1){
		gradient.setColorAt(i, QColor::fromHslF(1.0 - i, 1, 0.5));
	}
	QPen pen(QBrush(gradient), wheel_width);
	paint.setPen(pen);

	paint.drawArc(rr, 0, 360 * 16);

	qreal ttf = ((qreal(this->value()) / qreal(this->maximum()))*(M_PI*2) + M_PI/2);
	QPoint pp = this->rect().center() + QPoint(qCos(ttf) * (max_ratio), qSin(ttf) * (max_ratio));

	QPen pen2(Qt::black);
	pen2.setWidth(2);
	paint.setPen(pen2);
	paint.drawLine(this->rect().center(), pp);
	
// 	this->QDial::paintEvent(event);
}
void
SpinScanPolarPlot::configChanged(qint32)
{
    setCanvasBackground(GColor(CTRAINPLOTBACKGROUND));

    QColor col = GColor(CSPINSCANRIGHT);
    col.setAlpha(120);
    QBrush brush = QBrush(col);
    QPen pen(col);
    pen.setWidth(4); // thicker pen
    rightCurve->setBrush(Qt::NoBrush);
    rightCurve->setPen(pen);
    rightCurve->setStyle(QwtPlotCurve::Lines);
    rightCurve->setData(rightSpinScanPolarData);

    QColor col2 = GColor(CSPINSCANLEFT);
    col2.setAlpha(120);
    QBrush brush2 = QBrush(col2);
    QPen pen2(col2);
    pen2.setWidth(4); // thicker pen
    leftCurve->setBrush(Qt::NoBrush);
    leftCurve->setPen(pen2);
    leftCurve->setStyle(QwtPlotCurve::Lines);
    leftCurve->setData(leftSpinScanPolarData);
}
Esempio n. 7
0
void GEllipse::draw(CDC* dc)
{
	CPen pen(this->getPattern(), this->getThick(), this->getLineColor());
	dc->SelectObject(&pen);
	CBrush brush;
	brush.CreateHatchBrush(this->getFillPattern(), this->getFillColor());	
	
	dc->SelectObject(&brush);
	// 처음에 색이 NULL 이면 투명으로
	if (this->getFillColor() == NULL)
		dc->SelectStockObject(NULL_BRUSH);
			
	// 원 그리기는 여기서부터
	dc->MoveTo(getStartX(), getStartY());
	dc->Ellipse(this->getStartX(), this->getStartY(), GetEnd().x, GetEnd().y);
	if (this->getSelected() == TRUE){
		CPen pen2(PS_SOLID, 0, RGB(0, 0, 0));
		dc->SelectObject(&pen2);
		CBrush brush2(RGB(255, 255, 255));
		dc->SelectObject(&brush2);
		m_selectedRect[0] = new CRect(this->getStartX() - 5, this->getStartY() - 5, this->getStartX() + 5, this->getStartY() + 5);
		m_selectedRect[1] = new CRect(this->getEndX() - 5, this->getStartY() - 5, this->getEndX() + 5, this->getStartY() + 5);
		m_selectedRect[2] = new CRect(this->getStartX() - 5, this->getEndY() - 5, this->getStartX() + 5, this->getEndY() + 5);
		m_selectedRect[3] = new CRect(this->getEndX() - 5, this->getEndY() - 5, this->getEndX() + 5, this->getEndY() + 5); // 메모리 누수의 위험 있음. 수정바람!
		dc->Rectangle(m_selectedRect[0]);
		dc->Rectangle(m_selectedRect[1]);
		dc->Rectangle(m_selectedRect[2]);
		dc->Rectangle(m_selectedRect[3]);
	}
}
Esempio n. 8
0
void IndicatorItem::paint(QPainter *painter, const QStyleOptionGraphicsItem *, QWidget *) {
    painter->setRenderHint(QPainter::Antialiasing);

    QPen pen(color);
    pen.setWidthF(width);

    int baseX = qMin(start.x(), finish.x());
    int baseY = qMin(start.y(), finish.y());

    QLinearGradient linearGrad(start - QPoint(baseX, baseY),
        finish - QPoint(baseX, baseY));
    QColor start_color(255, 255, 255, 0);
    linearGrad.setColorAt(0, start_color);
    linearGrad.setColorAt(1, color.lighter());


    QBrush brush(linearGrad);
    pen.setBrush(brush);

    painter->setPen(pen);
    painter->drawLine(mapFromScene(start), mapFromScene(finish));

    QPen pen2(QColor(200, 200, 200, 30));
    pen2.setWidth(6);
    painter->setPen(pen2);
    painter->drawLine(mapFromScene(start), mapFromScene(finish));
}
void CPropertyGridCheckProperty::OnDrawValue(CDC* pDC, CRect rect)
{
	CPen pen(PS_SOLID,1,RGB(28,81,128));
	CPen *pOldPen=(CPen*)pDC->SelectObject(&pen);
	CRect rc=rect;
	rc.left+=3;
	rc.right=rc.left+rc.Height()-4;
	rc.bottom-=2;
	rc.top+=3;
	pDC->Rectangle(rc);
	if(m_bChecked)
	{
		CPen pen2(PS_SOLID,2,RGB(33,161,33));
		pDC->SelectObject(&pen2);
		CPoint pt1,pt2,pt3;
		pt1.x=rc.left+2;
		pt1.y=rc.top+rc.Height()*3/8;

		pt2.x=rc.left+rc.Width()*5/12;
		pt2.y=rc.top+rc.Height()*4/5-1;

		pt3.x=rc.right-2;
		pt3.y=rc.top+rc.Height()/4-1;

		pDC->MoveTo(pt1);
		pDC->LineTo(pt2);
		pDC->LineTo(pt3);
	}
	pDC->SelectObject(pOldPen);
}
Esempio n. 10
0
void MainWindow::paintEvent(QPaintEvent *) {
	int nelem = applist.count();
	int cols = nelem / ROWS + 1;

	QPainter painter(this);
	painter.setRenderHint(QPainter::Antialiasing);
	QSize sz = sizeHint();
	painter.fillRect(QRect(0, 0, sz.width(), sz.height()), QBrush(QColor(255, 20, 20)));

	int i = 0;
	int j = 0;
	for (; i < nelem; i++, j++) {
		if (j >= ROWS)
			j = 0;
			
		QIcon icon = applist[i].app_icon_;
		int sz = 64 ;
		if (active_index_ == i)
			sz -= animation_id_ * 3;
			
		QPixmap pixmap = icon.pixmap(QSize(sz, sz), QIcon::Normal, QIcon::On);
		painter.drawPixmap(QPoint(MARGIN * 2 + (64 - sz) / 2 + (i / ROWS) * 64, MARGIN *2 + j * 64 + TOP + (64 - sz) / 2), pixmap);
	}

	// vertical bars
	QPen pen1(Qt::black);
	painter.setPen(pen1);
	for (i = 0; i < cols; i++) {
		painter.drawLine(MARGIN * 2 + i * 64 + 21, MARGIN * 2 + TOP, MARGIN * 2 + i * 64 + 21, MARGIN * 2 + ROWS * 64 + TOP);
		painter.drawLine(MARGIN * 2 + i * 64 + 43, MARGIN * 2 + TOP, MARGIN * 2 + i * 64 + 43, MARGIN * 2 + ROWS * 64 + TOP);
		painter.drawLine(MARGIN * 2 + i * 64 + 64, MARGIN * 2 + TOP, MARGIN * 2 + i * 64 + 64, MARGIN * 2 + ROWS * 64 + TOP);
	}
	
	// horizontal bars
	for (i = 0; i < ROWS - 1; i++) {
		painter.drawLine(MARGIN * 2, MARGIN * 2 + 64 * (i + 1) - 1 + TOP,
			MARGIN * 2 + 64 * cols, MARGIN * 2 + 64 * (i + 1) - 1 + TOP);

	}

	// close button
	painter.fillRect(QRect(MARGIN * 2 + cols * 64 - 8, 8, 12, 3), QBrush(Qt::white));
	

	painter.setFont(QFont("Sans", TOP, QFont::Normal));
	QPen pen2(Qt::white);
	painter.setPen(pen2);
	painter.drawText(MARGIN * 2, TOP + MARGIN / 2, "Firetools");

	if (animation_id_ > 0) {
		animation_id_--;
		QTimer::singleShot(ADELAY, this, SLOT(update()));
	}
	
	
}
Esempio n. 11
0
void CFileDlg::OnPaint()
{
	CPaintDC dc(this); // device context for painting
	// TODO: 在此处添加消息处理程序代码
	// 不为绘图消息调用 CDialog::OnPaint()
 
 	CRect   rect;
 	GetClientRect(rect);
// 	dc.FillSolidRect(rect,RGB(255,255,255));

	CClientDC aDC(this); //CClientDC的构造函数需要一个参数,这个参数是指向绘图窗口的指针,我们用this指针就可以了

	CPoint startPoint;
	CPoint endPoint;

	startPoint.x = -1;
	startPoint.y = 38;
	endPoint.x = rect.Width()+1;
	endPoint.y = 38;

	COLORREF m_Color(RGB(160,160,255));

	CPen pen(PS_SOLID,1,m_Color); ////建立一个画笔类对象,构造时设置画笔属性
	aDC.SelectObject(&pen);
	aDC.MoveTo(startPoint);
	aDC.LineTo(endPoint);

	startPoint.x = -1;
	startPoint.y = 40;
	endPoint.x = rect.Width()+1;
	endPoint.y = 40;

	COLORREF m_Color3(RGB(255,255,255));

	CPen pen3(PS_SOLID,2,m_Color3); ////建立一个画笔类对象,构造时设置画笔属性
	aDC.SelectObject(&pen3);
	aDC.MoveTo(startPoint);
	aDC.LineTo(endPoint);



	startPoint.x = 218;
	startPoint.y = 38;
	endPoint.x = 218;
	endPoint.y = rect.Height()+2;


	COLORREF m_Color2(RGB(190,190,190));

	CPen pen2(PS_SOLID,1,m_Color2);
	aDC.SelectObject(&pen2);
	aDC.MoveTo(startPoint);
	aDC.LineTo(endPoint);
}
Esempio n. 12
0
void CttView::LineCai(const CPoint &x, const CPoint &y){
	int c[2][4];
	int cnum[2];
	CDC* pDC = GetWindowDC();
	CPen pen1(0, 0, RGB(255, 0, 0));
	CPen pen2(0, 3, RGB(0, 0, 0));
	CPen pen3(0, 2, RGB(0, 0, 0));
	GetC(c[0],cnum[0],x);
	GetC(c[1],cnum[1],y);
	if (cnum[0] & cnum[1]){
		pDC->SelectObject(&pen1);
		pDC->MoveTo(x);
		pDC->LineTo(y);
		return;
	}
	if ((cnum[0] | cnum[1])==0){
		pDC->SelectObject(&pen2);
		pDC->MoveTo(x);
		pDC->LineTo(y);
		return;
	}
	pDC->SelectObject(&pen1);
	pDC->MoveTo(x);
	pDC->LineTo(y);
	CPoint a[2];
	int an = 0;
	if (c[0][0] != c[1][0])//与下边有交
	{
		int jx = x.x + (1.0*m_d - x.y) / (y.y - x.y)  *(y.x - x.x);
		if (jx > m_l && jx < m_r) a[an++] = CPoint(jx, m_d);
	}
	if (c[0][1] != c[1][1])//与上边有交
	{
		int jx = x.x + (1.0*m_u - x.y) / (y.y - x.y)  *(y.x - x.x);
		if (jx > m_l && jx < m_r) a[an++] = CPoint(jx, m_u);
	}
	if (c[0][2] != c[1][2])//与右边有交
	{
		int jy = x.y + (1.0*m_r - x.x) / (y.x - x.x)  *(y.y - x.y);
		if (jy < m_d && jy > m_u) a[an++] = CPoint(m_r, jy);
	}
	if (c[0][3] != c[1][3])//与左边有交
	{
		int jy = x.y + (1.0*m_l - x.x) / (y.x - x.x)  *(y.y - x.y);
		if (jy < m_d && jy > m_u) a[an++] = CPoint(m_l, jy);
	}
	if (an == 1){
		if (cnum[0] == 0)a[an++] = x;
		else a[an++] = y;
	}
	pDC->SelectObject(&pen2);
	pDC->MoveTo(a[0]);
	pDC->LineTo(a[1]);
}
Esempio n. 13
0
void CFreqDial::drawDial()
{
	wxMemoryDC dc;
	dc.SelectObject(*m_bitmap);

#if defined(__WXMSW__)
	int major, minor;
	::wxGetOsVersion(&major, &minor);

	wxColour bgColour;
	if (major >= 6)
		bgColour = wxColour(0xF0, 0xF0, 0xF0);		// Windows Vista and newer
	else if (major == 5 && minor >= 1)
		bgColour = wxColour(0xEC, 0xE9, 0xD8);		// Windows XP
	else
		bgColour = wxColour(0xD4, 0xD0, 0xC8);		// Windows 2000 and earlier
#elif defined(__WXGTK__)
	wxColour bgColour(0xF0, 0xF1, 0xF2);
	// wxColour bgColour(0xED, 0xE9, 0xE3);
#elif defined(__WXMAC__)
	wxColour bgColour(0xF0, 0xF0, 0xF0);
#else
#error "Unknown platform"
#endif

	wxBrush brush0(bgColour);
	wxPen pen0(bgColour);

	dc.SetPen(pen0);
	dc.SetBrush(brush0);
	dc.DrawRectangle(0, 0, m_width, m_height);

	int middleX = m_width / 2;
	int middleY = m_height / 2;

	dc.SetBrush(*wxLIGHT_GREY_BRUSH);
	wxPen pen1(*wxBLACK, 2, wxSOLID);
	dc.SetPen(pen1);
	dc.DrawCircle(middleX, middleY, (m_width - 2) / 2);

	int x = m_width / 2 - int(double(m_width / 2 - 25) * ::sin(m_angle * (M_PI / 180.0)) + 0.5);
	int y = m_height / 2 + int(double(m_height / 2 - 25) * ::cos(m_angle * (M_PI / 180.0)) + 0.5);

	dc.SetBrush(*wxBLACK_BRUSH);
	wxPen pen2(*wxWHITE, 2, wxSOLID);
	dc.SetPen(pen2);
	dc.DrawCircle(x, y, 20);

	dc.SelectObject(wxNullBitmap);

	wxClientDC clientDC(this);
	show(clientDC);
}
Esempio n. 14
0
void CLrcMask::DrawBkMask()
{
	HDC hTempDc = GetDC(m_hWnd);
	HDC hMenDc = CreateCompatibleDC(hTempDc);

	DuiLib::CDuiRect rc;
	GetClientRect(&rc);

	HBITMAP hbmp;
	BITMAPINFO bitmapinfo;
	bitmapinfo.bmiHeader.biSize = sizeof(BITMAPINFOHEADER);
	bitmapinfo.bmiHeader.biBitCount = 32;
	bitmapinfo.bmiHeader.biHeight = rc.GetHeight();
	bitmapinfo.bmiHeader.biWidth = rc.GetWidth();
	bitmapinfo.bmiHeader.biPlanes = 1;
	bitmapinfo.bmiHeader.biCompression=BI_RGB;
	bitmapinfo.bmiHeader.biXPelsPerMeter=0;
	bitmapinfo.bmiHeader.biYPelsPerMeter=0;
	bitmapinfo.bmiHeader.biClrUsed=0;
	bitmapinfo.bmiHeader.biClrImportant=0;
	bitmapinfo.bmiHeader.biSizeImage = bitmapinfo.bmiHeader.biWidth * bitmapinfo.bmiHeader.biHeight * bitmapinfo.bmiHeader.biBitCount / 8;

	hbmp = CreateDIBSection(hMenDc,&bitmapinfo,0,NULL,0,0);
	SelectBitmap(hMenDc,hbmp);

	Graphics graphics(hMenDc);

	graphics.SetSmoothingMode(SmoothingModeAntiAlias);
	graphics.SetInterpolationMode(InterpolationModeHighQualityBicubic);
	SolidBrush brush(Color(50,200,200,200));
	Pen pen1(Color(155,223,223,223));
	Pen pen2(Color(55,223,223,223));
	LPRECT lpRect = &rc;
	RectF rect((Gdiplus::REAL)lpRect->left,(Gdiplus::REAL)lpRect->top,(Gdiplus::REAL)(lpRect->right-lpRect->left),(Gdiplus::REAL)(lpRect->bottom-lpRect->top));

	graphics.FillRectangle(&brush,rect);
	graphics.DrawRectangle(&pen1,rect.GetLeft()+2,rect.GetTop()+2,rect.Width - 4,rect.Height -4);
	graphics.DrawRectangle(&pen2,rect.GetLeft()+1,rect.GetTop()+1,rect.Width - 2,rect.Height -2);

	DuiLib::CDuiRect rtWnd;
	GetWindowRect(&rtWnd);

	DuiLib::CPoint dstPt(0,0);
	DuiLib::CPoint winPt(rtWnd.left,rtWnd.top);
	DuiLib::CSize size(rc.GetWidth(),rc.GetHeight());
	BLENDFUNCTION blend = {AC_SRC_OVER,0,255,AC_SRC_ALPHA};
	BOOL bret = ::UpdateLayeredWindow(m_hWnd,hTempDc,&winPt,&size,hMenDc,&dstPt,0,&blend,ULW_ALPHA);
	DeleteDC(hMenDc);
	ReleaseDC(m_hWnd,hTempDc);	

//	assert(bret);
}
Esempio n. 15
0
void GameWidget::paintEvent(QPaintEvent *e)
{
    QPainter p(this);

    if (m_bShowSoser)
    {
        p.drawPixmap(m_soserX, 0, m_soser);
    }

    for(TShips::const_iterator sit = m_ships.constBegin(); sit != m_ships.constEnd(); ++sit)
    {
        p.drawPixmap(sit->x, sit->y, *sit->pix);
    }

    QRadialGradient grad1(0, 0, 7);
    grad1.setColorAt(1, QColor(0,0,0));
    grad1.setColorAt(0, QColor(255,255,255));
    QPen pen1(QColor(0,0,0));
    QRadialGradient grad2(0, 0, 7);
    grad2.setColorAt(1, QColor(255,0,0));
    grad2.setColorAt(0, QColor(255,200,200));
    QPen pen2(QColor(255,0,0));
    
    p.setPen(pen1);
    p.setBrush(QBrush(grad1));
    int lastL = 1;

    for(TShots::const_iterator it = m_shots.constBegin(); it != m_shots.constEnd(); ++it)
    {
        int x = it->x, y = it->y, l = it->level;
        if (l != lastL)
        {
            p.setPen((l==1)?pen1:pen2);
            p.setBrush((l==1)?grad1:grad2);
            lastL = l;
        }
        p.setBrushOrigin(x, y);
        p.drawEllipse(x - 7, y - 7, 14, 14);
    }

    p.drawPixmap(m_gunX-32, m_gunY, PicBucket::instance().getPic(1, 2).pixmap);
    m_shotspreg = QRegion();

    if (m_lives == 0)
    {	
        p.setPen(QPen(Qt::NoPen));
        p.setBrush(QBrush(QColor(255,255,255,188)));
        p.drawRect(0, 0, sizeX, sizeY);
        QLabel::paintEvent(e);
        return;
    }
}
Esempio n. 16
0
//绘制K线图
void CHistoryView::DrawLineOfK(CDC *pDC)
{
	CHistoryDoc* pHistoryDoc = (CHistoryDoc*)GetDocument();
	int nSel = ( (CHistoryFrame*)GetParentFrame() )->GetSliderCtrlPos();

	int nCount = pHistoryDoc->m_arrayHistoryInfo.GetSize();
	double dbLeft = m_rectMid.left;//X起始位置
	double dbBottom = m_rectMid.bottom + m_nPenWidth;//Y起始位置
	CPen pen1( PS_SOLID,m_nPenWidth / 2,RGB(255,0,0) );
	CPen pen2( PS_SOLID,m_nPenWidth / 2,RGB(0,255,0) );
	CPen* pOldPen;
	for(int nI = 0;nI < m_nStockNumPerPage;nI++)
	{
		double dbHiPrice = pHistoryDoc->m_arrayHistoryInfo[nI + nSel]->m_dbHiPrice;//当日最高价
		double dbLowPrice = pHistoryDoc->m_arrayHistoryInfo[nI + nSel]->m_dbLowPrice;//当日最低价
		double dbOpenPrice = pHistoryDoc->m_arrayHistoryInfo[nI + nSel]->m_dbOpenPrice;//当日开盘价
		double dbClosePrice	= pHistoryDoc->m_arrayHistoryInfo[nI + nSel]->m_dbClosePrice;//当日收盘价
		double dbLowestPrice = pHistoryDoc->m_dbLowPrice;//历史最低价
		
		//绘制矩形
		dbLeft += m_dbXStep;
		CRect rect;
		rect.left = (int)dbLeft;
		rect.right = rect.left + int(m_dbXStep / 2);
		if(dbClosePrice >= dbOpenPrice)//收盘价高于开盘价
		{
			rect.top = int( (dbClosePrice - dbLowestPrice) * m_dbYPriceUnit + dbBottom );
			rect.bottom = int( (dbOpenPrice - dbLowestPrice) * m_dbYPriceUnit + dbBottom );
			CPen pen( PS_SOLID,m_nPenWidth / 2,RGB(255,0,0) );
			pOldPen = pDC->SelectObject(&pen1);
			pDC->Rectangle(&rect);
		}
		else//收盘价低于开盘价
		{
			rect.top = int( (dbOpenPrice - dbLowestPrice) * m_dbYPriceUnit + dbBottom );
			rect.bottom = int( (dbClosePrice - dbLowestPrice) * m_dbYPriceUnit + dbBottom );
			CBrush brush( RGB(0,255,0) );
			pDC->FillRect(&rect,&brush);
			pOldPen = pDC->SelectObject(&pen2);
		}	

		//绘制直线
		pDC->MoveTo( int(dbLeft + m_dbXStep / 4),rect.top);
		pDC->LineTo( int(dbLeft + m_dbXStep / 4),int( (dbHiPrice - dbLowestPrice) * m_dbYPriceUnit + dbBottom ) );
		pDC->MoveTo( int(dbLeft + m_dbXStep / 4),rect.bottom);
		pDC->LineTo( int(dbLeft + m_dbXStep / 4),int( (dbLowPrice - dbLowestPrice) * m_dbYPriceUnit + dbBottom ) );

		pDC->SelectObject(pOldPen);
	}

}
Esempio n. 17
0
void Viewport::drawOverlay(QPainter *painter)
{
	painter->save();
	QPolygonF poly = modelview.map(overlayPoints);
	QPen pen(QColor(0, 0, 0, 127));
	pen.setWidth(5);
	painter->setPen(pen);
	painter->drawPolyline(poly);
	QPen pen2(Qt::yellow);
	pen2.setWidth(2);
	painter->setPen(pen2);
	painter->drawPolyline(poly);
	painter->restore();
}
Esempio n. 18
0
void GraphicsScene::setupScene()
{
    ballCollection.append(ball);
    ballCollection.append(ballRouge);
    ballCollection.append(ballJaune);
    ballCollection.append(ballVerte);
    ballCollection.append(ballDefault);
    ballDefault->setStop(false);

    QPen pen2(Qt::white,1,Qt::SolidLine);
    QRectF rect(0,10,976,652);
    addRect(rect,pen2);

    prisme->setPos( width()/2-prisme->getPixmap()->width()/2, height()/2-prisme->getPixmap()->height()/2);
    addItem(prisme);

    //prismeForme->setPen(QPen(QBrush(QColor("red")),2,Qt::SolidLine));
    QPolygonF polygon;
    polygon << QPointF( width()/2,  height()/2-prisme->getPixmap()->height()/2) << QPointF( width()/2-prisme->getPixmap()->width()/2, this->height()/2+prisme->getPixmap()->height()/2)<<QPointF(this->width()/2+prisme->getPixmap()->width()/2,this->height()/2+prisme->getPixmap()->height()/2);
    prismeForme->setPolygon(polygon);
    addItem(prismeForme);

    barPlayer->setPos(-barPlayer->getPixmap()->width()/2,( height()/2)-(barPlayer->getPixmap()->height()/2));
    addItem(barPlayer);

    barIA->setPos( width()-barIA->getPixmap()->width()/2,( height()/2)-(barIA->getPixmap()->height()/2));
    addItem(barIA);

    scoreManager->getScoreView2()->setPos(670,560);
    addItem(scoreManager->getScoreView2());

    scoreManager->getScoreView1()->setPos(210,560);
    addItem(scoreManager->getScoreView1());

    initBallBlanche();

    timer = new QTimer( this );
    timer->setInterval( 20 );
    timer->start();
    connect( timer, SIGNAL(timeout()), this, SLOT(actualiserScene()) );

    timer2 = new QTimer(this);
    timer2->setInterval(1000);
    timer2->start();
    connect( timer2, SIGNAL(timeout()), this, SLOT(refreshLine()) );
    connect( barPlayer, SIGNAL(inactivite()), this, SLOT(stopScene()) );
    connect( this, SIGNAL(finPartie()), this, SLOT(stopScene()) );
}
Esempio n. 19
0
MapEditor::MapEditor(QGraphicsScene* scene)
    : scene_(scene)
{
    copypaste_items_.clear();

    selection_stage_ = 0;

    first_selection_x_ = 0;
    first_selection_y_ = 0;
    second_selection_x_ = 0;
    second_selection_y_ = 0;

    QPolygonF p;
    p.push_back(QPointF(0.0, 0.0));
    p.push_back(QPointF(0.0, 32.0));
    p.push_back(QPointF(32.0, 32.0));
    p.push_back(QPointF(32.0, 0.0));

    QPen pen(QColor(200, 0, 0));
    QBrush brush(QColor(100, 0, 100, 100));

    pointer_.image = scene->addPolygon(p, pen, brush);
    pointer_.image->setZValue(100);

    QPolygonF p2;
    p2.push_back(QPointF(0.0, 0.0));
    p2.push_back(QPointF(0.0, 10 * 32.0));
    p2.push_back(QPointF(10 * 32.0, 10 * 32.0));
    p2.push_back(QPointF(10 * 32.0, 0.0));

    QPen pen2(QColor(0, 100, 200));
    pen2.setWidth(2);

    border_image_ = scene->addPolygon(p2, pen2);
    border_image_->setZValue(99);
}
Esempio n. 20
0
void CTimeAxis::drawTimePoint(CDC* pDC, int idxYY, int idxLrc/*, COLORREF clr*/)
{
	if (pDC == NULL)
		return;

	if (m_pSyr == NULL)
		return;

	int num = m_pSyr->getYYerCount();
	if (num < 1)
		return;

	if (idxYY < 0 || idxYY >= num)
		return;

	int numLrc = m_pSyr->getYYerLrcsCount(idxYY);
	if (numLrc < 1)
		return;

	if (idxLrc < 0 || idxLrc >= numLrc)
		return;

	int time = m_pSyr->getYYerLrcTime(idxYY, idxLrc);
	if (time < m_minTime || time > m_maxTime)
		return;

	CRect rect;
	this->GetWindowRect(&rect);
	ScreenToClient(&rect);
	rect.top += TIME_BREV_H;

// 	int dy = rect.Height() / (num + 1);

	int x = rect.Width() * (time - m_minTime) / (m_maxTime - m_minTime) + rect.left;
	int y = rect.Height() * (idxYY + 1) / (num + 1) + rect.top;

	CPen *pOldPen = NULL;
	CPen pen1(PS_SOLID, 1, RGB(0, 255, 255));
	CPen pen2(PS_SOLID, 1, RGB(255, 0, 255));
	int state = m_pSyr->getYYerLrcState(idxYY, idxLrc);
	if (state == 0)
	{
		pOldPen = pDC->SelectObject(&pen1);
	}
	else if (state == 1)
	{
		pOldPen = pDC->SelectObject(&pen2);
	}

	int l = x - 2;
	int r = x + 2;
	int t = y - 5;
	int b = y + 5;
	if (l < rect.left)			l = rect.left;
	if (r > rect.right-1)		r = rect.right-1;
	if (t < rect.top+1)			t = rect.top+1;
	if (b > rect.bottom-1)		b = rect.bottom-1;
	pDC->MoveTo(l, t);
	pDC->LineTo(r, t);
	pDC->LineTo(r, b);
	pDC->LineTo(l, b);
	pDC->LineTo(l, t-1);

	t = rect.top - TIME_BREV_H + 3;
	b = t + 8;
	pDC->MoveTo(x, t);
	pDC->LineTo(x, b);

	pDC->SelectObject(pOldPen);
}
Esempio n. 21
0
void CMFCView::OnDraw(CDC* pDC)
{
	CMFCDoc* pDoc = GetDocument();
	ASSERT_VALID(pDoc);
	CRect r;
	GetClientRect(&r);
	// array of font name
	CString font[4]={"Arial","Tahoma","Times New Roman", "Consolas"};

	CBrush brush; // init
	brush.CreateSolidBrush(RGB(255,0,0)); // red brush
	CBrush *pTempBrush = NULL;
	CBrush origBrush;
	pTempBrush = (CBrush*) pDC->SelectObject(&brush);
	// save original brush
	origBrush.FromHandle((HBRUSH)pTempBrush);
	// paint upper left corner with red brush
	pDC->Rectangle(0,0,r.Width()/2, r.Height()/2);

	try
	{
		CBrush brush2(RGB(rand()%255,rand()%255,rand()%255));
		CBrush brush3(RGB(rand()%255,rand()%255,rand()%255));
		CBrush brush4(RGB(rand()%255,rand()%255,rand()%255));
	
		pTempBrush = (CBrush*)pDC->SelectObject(&brush2);
		// Paint upper right corner with red brush.
		pDC->Rectangle(r.Width() / 2, 0, r.Width(), r.Height() / 2);
		pTempBrush = (CBrush*)pDC->SelectObject(&brush3);
		// Paint lower left corner with green hatched brush.
		pDC->Rectangle(0, r.Height() / 2, r.Width() / 2, r.Height());
		pTempBrush = (CBrush*)pDC->SelectObject(&brush4);
		// Paint lower right corner with resource brush.
		pDC->Rectangle(r.Width() / 2, r.Height() / 2, r.Width(), r.Height());
	}
	catch(CResourceException* e)
	{
		e->ReportError();
		e->Delete();
	}
	pDC->SelectObject(&origBrush);

	// set font for every times we create new single view
	CFont *oldf, f;
	// select a random font in font array.
	f.CreateFont(rand()%80, rand()%30, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, font[rand()%4]);
	oldf= pDC->SelectObject(&f);
	
	pDC->SetTextAlign(TA_CENTER); // align text to the center of the screen
	pDC->SetTextColor(RGB(rand()%255,rand()%255,rand()%255));
	pDC->TextOut(r.CenterPoint().x, r.CenterPoint().y, "hello world");
	
	// draw new rectangle
	CPen pen(PS_SOLID, 10, RGB(rand()%255,rand()%255,rand()%255));
	CPen *pOldPen = pDC->SelectObject(&pen);
	pDC->Rectangle(50, 50, 250, 250);
	pDC->SelectObject(pOldPen);
	
	// draw new ellipse
	CPen pen2(PS_SOLID, 10, RGB(rand()%255,rand()%255,rand()%255));
	CPen *pOldPen2 = pDC->SelectObject(&pen2);
	pDC->Ellipse(50, 50, 250, 250);
	pDC->SelectObject(pOldPen2);
	
	// duong cheo chinh
	CPen pen3(PS_SOLID, 10, RGB(rand()%255,rand()%255,rand()%255));
	CPen *pOldPen3 = pDC->SelectObject(&pen3);
	pDC->MoveTo(50, 50);
	pDC->LineTo(250, 250);
	pDC->SelectObject(pOldPen3);
	
	// duong cheo phu
	CPen pen4(PS_SOLID, 10, RGB(rand()%255,rand()%255,rand()%255));
	CPen *pOldPen4 = pDC->SelectObject(&pen4);
	pDC->MoveTo(250, 50);
	pDC->LineTo(50, 250);
	pDC->SelectObject(pOldPen4);
	
	// release object when it is no longer in use
	f.DeleteObject();
	pen.DeleteObject();
	pen2.DeleteObject();
	pen3.DeleteObject();
	pen4.DeleteObject();
}
Esempio n. 22
0
void Plot::paintEvent(QPaintEvent *event)
{
    QWidget::paintEvent(event);

    if (softMinimum == softMaximum)
        return;

    for (const auto l : legend)
        if (l->pen() != Qt::transparent)
            goto draw;

    return;

    draw:

    QPainter painter(this);

    // set coordinate system
    QSize s;
    s.setHeight(height() - padding_top - padding_bottom);

    // TODO bug - wykres nie działa, jeśli wartości brzegowe nie są całkowite - problem z setWindow
    double minval = 0;//double minval = qFloor(minimax.minimum(softMinimum, softMaximum));
    double maxval = 0;//qCeil(minimax.maximum(softMinimum, softMaximum));
    for (auto i : session->chart->series())
        if (legend[i]->pen() != Qt::transparent)
            for (int j = softMinimum; j <= softMaximum && j < reinterpret_cast<QtCharts::QLineSeries*>(i)->count(); j++)
                maxval = qMax(maxval, reinterpret_cast<QtCharts::QLineSeries*>(i)->at(j).y());

    if (minval == maxval)
        minval--;

    double delta = tickSpan(minval, maxval, s.height(), 24);
    /* TODO do pewnej wysokości nie powinno się rozrzedzać podziałki, tylko ją zwyczajnie skalować */

    double ut = maxval = qCeil(maxval / delta) * delta;//double ut = qFloor(maxval / delta) * delta;
    double lt = qCeil(minval / delta) * delta;

    int scale = 1;

    while (delta * scale < 1)
        scale *= 10;

    s.setWidth(width() - 50 - 20);

    painter.setViewport(50 + 10, height() - padding_bottom, s.width(), -s.height());
    painter.setWindow(softMinimum, minval, softMaximum - softMinimum, (maxval - minval) * scale);

    auto transform = painter.combinedTransform();

    // draw axis
    painter.setRenderHint(QPainter::Antialiasing);

    QPen pen1(QBrush("#808080"), 1.);
    pen1.setCosmetic(true);

    painter.setPen(pen1);

    painter.drawLine(softMinimum, minval * scale, softMaximum, minval * scale);

    int gap = tickSpan(painter.fontMetrics().width(QString::number(softMaximum)) + 20, width() - 50);

    painter.setViewTransformEnabled(false);

    for (int i = softMinimum + (gap - (softMinimum % gap)) % gap; i <= softMaximum; i += gap)
    {
        auto tick = transform.map(QPointF(i, minval)).toPoint();

        painter.drawLine(tick, tick + QPoint(0, 5));
        painter.drawText(QRect(tick + QPoint(0, 9), QSize()), Qt::AlignHCenter | Qt::AlignTop | Qt::TextDontClip, QString::number(i));
    }

    for (qreal i = lt; i <= ut; i += delta)
        painter.drawText(QRect(transform.map(QPointF(softMinimum, i * scale)).toPoint() - QPoint(9, 0), QSize()), Qt::AlignRight | Qt::AlignVCenter | Qt::TextDontClip, QString::number(i));

    painter.setViewTransformEnabled(true);

    pen1.setStyle(Qt::DashLine);
    pen1.setColor("#333333");

    painter.setPen(pen1);

    for (qreal i = (lt != minval ? lt : lt + delta); i <= ut; i += delta)
        painter.drawLine(softMinimum, i * scale, softMaximum, i * scale);

    painter.save();
    painter.scale(1, scale);

    // plot data
    for (auto i : session->chart->series())
    {
        auto interval = reinterpret_cast<QtCharts::QLineSeries*>(i)->pointsVector().mid(softMinimum, softMaximum - softMinimum + 1);
        if (interval.isEmpty()) continue;
        interval.prepend({interval.first().x(), 0});
        interval.append({interval.last().x(), 0});

        QLinearGradient gradient(0, minval, 0, maxval);
        gradient.setColorAt(0, Qt::transparent);
        gradient.setColorAt(1, legend[i]->brush());

        painter.setPen(Qt::NoPen);
        painter.setBrush(gradient);

        painter.drawPolygon(interval);

        QPen pen2(legend[i]->pen(), 2.);
        pen2.setCosmetic(true);

        painter.setPen(pen2);

        painter.drawPolyline(&interval[1], interval.size() - 2);
    }

    painter.restore();

    if (softMinimum <= value() && value() <= softMaximum)
    {
        painter.setViewTransformEnabled(false);

        int crs = transform.map(QPointF(value(), 0)).x();

        QPen pen3(Qt::white, 2.);
        pen3.setJoinStyle(Qt::MiterJoin);

        painter.setPen(pen3);
        painter.setBrush(QBrush(Qt::white));
        painter.drawLine(crs, padding_top - 5, crs, height() - padding_bottom);
        painter.drawConvexPolygon(QPolygon({{crs, padding_top - 2}, {crs - 3, padding_top - 5}, {crs + 3, padding_top - 5}}));
    }
}
Esempio n. 23
0
void GraphView::DrawPoint(int index, wxRegion *region, bool maybe_repaint_cursor) {

	bool repaint_cursor = false;
	int current_index = 0;

	if (index < 0)
		return;

	if (!m_draw->GetValuesTable().at(index).IsData())
		return;

	wxDC* dc = m_dc;
	if (!dc->Ok())
		return;

	int x, y;

	GetPointPosition(dc, index, &x , &y);

	bool wide = m_draw->GetSelected() && m_draw->GetDoubleCursor();

	int line_width = wide ? 3 : 1;

	m_sdc.SetLineWidth(wide ? 3 : 1);
	m_sdc.SetWhiteForeground();	

	wxPen pen1(m_draw->GetDrawInfo()->GetDrawColor(), line_width, wxSOLID);
	wxPen pen2(alt_color, line_width, wxSOLID);
	dc->SetPen(pen1);

    	dc->SetBrush(wxBrush(wxColour(0,0,0), wxTRANSPARENT));

	int i = index;

	const Draw::VT& vt = m_draw->GetValuesTable();

	bool is_alternate = AlternateColor(index);

	if (i - 1 >= 0 && vt.at(i-1).IsData()) {
		int x1, y1;

		GetPointPosition(dc, i - 1, &x1, &y1);

		bool ac = AlternateColor(i - 1);

		if (ac && is_alternate)  {
			dc->SetPen(pen2);
		} else {
			dc->SetPen(pen1);
		}

		dc->DrawLine(x1, y1, x, y);
		m_sdc.DrawLine(x1, y1, x, y);

		if (ac)
			dc->SetPen(pen2);
		else
			dc->SetPen(pen1);

		DrawDot(x1, y1, dc, &m_sdc, region);

		if (region)
			region->Union(x1 , std::min(y, y1) - line_width, abs(x - x1) + 2 * line_width, abs(y - y1) + 2 * line_width);

		if (maybe_repaint_cursor && 
			m_draw->GetCurrentIndex() != -1  &&
			m_draw->GetCurrentIndex() == i) {

			repaint_cursor = true;
			current_index = i - 1;
		}

	}

	if ((i + 1) < (int)vt.size() && vt.at(i + 1).IsData()) {
		int x2, y2;

		bool ac = AlternateColor(i + 1);
		
		if (ac && is_alternate) {
			dc->SetPen(pen2);
		} else {
			dc->SetPen(pen1);
		}

		GetPointPosition(dc, i + 1, &x2 , &y2);

		dc->DrawLine(x, y, x2, y2);
		m_sdc.DrawLine(x, y, x2, y2);

		if (ac)
			dc->SetPen(pen2);
		else
			dc->SetPen(pen1);

		DrawDot(x2, y2, dc, &m_sdc, region);

		if (region)
			region->Union(x, std::min(y, y2) - line_width, abs(x - x2) + 2 * line_width, abs(y - y2) + 2 * line_width);

		if (maybe_repaint_cursor && 
			m_draw->GetCurrentIndex() != -1 &&
			m_draw->GetCurrentIndex() == i) {
			repaint_cursor = true;
			current_index = i + 1;
		}

	}
	

	if (is_alternate) 
		dc->SetPen(pen2);
	else
		dc->SetPen(pen1);

	DrawDot(x, y, dc, &m_sdc, region);

	m_sdc.SetLineWidth(1);
	pen1.SetWidth(1);
	pen2.SetWidth(1);


	if (repaint_cursor)
		DrawCursor(current_index, region);

	dc->SetPen(wxNullPen);
	dc->SetBrush(wxNullBrush);

}
Esempio n. 24
0
void CElcStatic::OnPaint()
{
	CPaintDC dc(this);

	DWORD dwStyle = GetStyle();
	DWORD dwStaticType = (dwStyle & SS_TYPEMASK);

	CRect rect;
	GetClientRect(rect);

	CElcMemDC dcMem(&dc, rect);

	if (m_bUseBackgndColor) {
		dcMem.FillSolidRect(rect, m_crBackgnd);
	}
	else if (GetParent()) {
		HBRUSH hBrush = (HBRUSH)GetParent()->SendMessage(WM_CTLCOLORSTATIC, (WPARAM)dcMem.GetSafeHdc(), (LPARAM)m_hWnd);
		if (hBrush)
			::FillRect(dcMem.GetSafeHdc(), rect, hBrush);
	}

	if (m_bUseTextColor) {
		dcMem.SetTextColor(m_crText);
	}

	if (m_pImage) {
		Graphics g(dcMem.GetSafeHdc());

		Rect rcImage(0, 0, m_pImage->GetWidth(), m_pImage->GetHeight());
		Rect rcDest;
		if (dwStyle & SS_CENTERIMAGE) {
			rcDest.X = rect.left + (rect.Width() - rcImage.Width) / 2;
			rcDest.Y = rect.top + (rect.Height() - rcImage.Height) / 2;
			rcDest.Width = rcImage.Width;
			rcDest.Height = rcImage.Height;
		}
		else {
			rcDest.X = rect.left;
			rcDest.Y = rect.top;
			rcDest.Width = rect.Width();
			rcDest.Height = rect.Height();
		}

		thePainter.DrawStretchImage(&g, m_pImage, &rcDest, &rcImage, 0);
	}
	else if (dwStaticType == SS_ICON
		|| dwStaticType == SS_BITMAP
		|| dwStaticType == SS_OWNERDRAW
		|| dwStaticType == SS_USERITEM
		|| dwStaticType == SS_ENHMETAFILE) 
	{
		// not support type
		// pls use SetImage() to replace
		ASSERT(0);
		return;
	}
	else if (dwStaticType == SS_BLACKRECT
		|| dwStaticType == SS_GRAYRECT
		|| dwStaticType == SS_WHITERECT
		|| dwStaticType == SS_BLACKFRAME
		|| dwStaticType == SS_GRAYFRAME
		|| dwStaticType == SS_WHITEFRAME)
	{
		// not support
		// pls use Standard MFC class : CStatic
		ASSERT(0);
		return;
	}
	else { 
		if (dwStaticType == SS_ETCHEDHORZ) {
			CPen pen1(PS_SOLID, 1, m_crEtched1);
			CPen * pOld = dcMem.SelectObject(&pen1);
			dcMem.MoveTo(rect.left, rect.top);
			dcMem.LineTo(rect.right - 2, rect.top);

			CPen pen2(PS_SOLID, 1, m_crEtched2);
			dcMem.SelectObject(&pen2);
			dcMem.MoveTo(rect.left + 2, rect.top+1);
			dcMem.LineTo(rect.right, rect.top+1);

			dcMem.SelectObject(&pOld);
		}
		else if (dwStaticType == SS_ETCHEDVERT) {
			CPen pen1(PS_SOLID, 1, m_crEtched1);
			CPen * pOld = dcMem.SelectObject(&pen1);
			dcMem.MoveTo(rect.left, rect.top);
			dcMem.LineTo(rect.left, rect.bottom - 2);

			CPen pen2(PS_SOLID, 1, m_crEtched2);
			dcMem.SelectObject(&pen2);
			dcMem.MoveTo(rect.left + 1, rect.top + 2);
			dcMem.LineTo(rect.left + 1, rect.bottom);

			dcMem.SelectObject(&pOld);
		}
		else if (dwStaticType == SS_ETCHEDFRAME) {
			// not implement
			// support later...
			ASSERT(0);
		}
		else {
			CFont* pOldFont = dcMem.SelectObject(GetFont());
			UINT nFormat = 0;
			
			if (dwStaticType == SS_LEFT) {
				nFormat = DT_LEFT | DT_NOFULLWIDTHCHARBREAK | DT_WORDBREAK;
			}
			else if (dwStaticType == SS_CENTER) {
				nFormat = DT_CENTER | DT_NOFULLWIDTHCHARBREAK | DT_WORDBREAK;
			}
			else if (dwStaticType == SS_RIGHT) {
				nFormat = DT_RIGHT | DT_NOFULLWIDTHCHARBREAK | DT_WORDBREAK;
			}
			else if (dwStaticType == SS_SIMPLE) {
				nFormat = DT_SINGLELINE | DT_VCENTER;
			}
			else if (dwStaticType == SS_LEFTNOWORDWRAP) {
				nFormat = DT_SINGLELINE;
			}

			/*
			// these codes are been commented because something errors are not been fiexd yet
			if (dwStyle & SS_ENDELLIPSIS) {
				nFormat |= DT_MODIFYSTRING | DT_END_ELLIPSIS | DT_WORD_ELLIPSIS;
			}
			if (dwStyle & SS_PATHELLIPSIS) {
				nFormat |= DT_MODIFYSTRING | DT_PATH_ELLIPSIS | DT_WORD_ELLIPSIS;
			}*/

			if (dwStyle & SS_NOPREFIX) {
				nFormat |= DT_NOPREFIX;
			}

			if (dwStyle & SS_EDITCONTROL) {
				nFormat |= DT_EDITCONTROL;
			}

			CString strText;
			GetWindowText(strText);
			dcMem.DrawText(strText, rect, nFormat);

			dcMem.SelectObject(pOldFont);
		}
	}

	dcMem.DrawMe();
}
Esempio n. 25
0
void QtGradientWidget::paintEvent(QPaintEvent *e)
{
    Q_UNUSED(e)

    QPainter p(this);

    if (d_ptr->m_backgroundCheckered) {
        int pixSize = 40;
        QPixmap pm(2 * pixSize, 2 * pixSize);

        QPainter pmp(&pm);
        pmp.fillRect(0, 0, pixSize, pixSize, Qt::white);
        pmp.fillRect(pixSize, pixSize, pixSize, pixSize, Qt::white);
        pmp.fillRect(0, pixSize, pixSize, pixSize, Qt::black);
        pmp.fillRect(pixSize, 0, pixSize, pixSize, Qt::black);

        p.setBrushOrigin((size().width() % pixSize + pixSize) / 2, (size().height() % pixSize + pixSize) / 2);
        p.fillRect(rect(), pm);
        p.setBrushOrigin(0, 0);
    }

    QGradient *gradient = 0;
    switch (d_ptr->m_gradientType) {
    case QGradient::LinearGradient:
        gradient = new QLinearGradient(d_ptr->m_startLinear, d_ptr->m_endLinear);
        break;
    case QGradient::RadialGradient:
        gradient = new QRadialGradient(d_ptr->m_centralRadial, d_ptr->m_radiusRadial, d_ptr->m_focalRadial);
        break;
    case QGradient::ConicalGradient:
        gradient = new QConicalGradient(d_ptr->m_centralConical, d_ptr->m_angleConical);
        break;
    default:
        break;
    }
    if (!gradient)
        return;

    gradient->setStops(d_ptr->m_gradientStops);
    gradient->setSpread(d_ptr->m_gradientSpread);

    p.save();
    p.scale(size().width(), size().height());
    p.fillRect(QRect(0, 0, 1, 1), *gradient);
    p.restore();

    p.setRenderHint(QPainter::Antialiasing);

    QColor c = QColor::fromRgbF(0.5, 0.5, 0.5, 0.5);
    QBrush br(c);
    p.setBrush(br);
    QPen pen(Qt::white);
    pen.setWidthF(1);
    p.setPen(pen);
    QPen dragPen = pen;
    dragPen.setWidthF(2);
    if (d_ptr->m_gradientType == QGradient::LinearGradient) {
        p.save();
        if (d_ptr->m_dragHandle == QtGradientWidgetPrivate::StartLinearHandle)
            p.setPen(dragPen);
        d_ptr->paintPoint(&p, d_ptr->m_startLinear, d_ptr->m_handleSize);
        p.restore();

        p.save();
        if (d_ptr->m_dragHandle == QtGradientWidgetPrivate::EndLinearHandle)
            p.setPen(dragPen);
        d_ptr->paintPoint(&p, d_ptr->m_endLinear, d_ptr->m_handleSize);
        p.restore();
    } else if (d_ptr->m_gradientType == QGradient::RadialGradient) {
        QPointF central = d_ptr->toViewport(d_ptr->m_centralRadial);

        p.save();
        QRectF r = d_ptr->pointRect(central, 2 * d_ptr->m_handleSize / 3);
        QRectF r1(0, r.y(), size().width(), r.height());
        QRectF r2(r.x(), 0, r.width(), r.y());
        QRectF r3(r.x(), r.y() + r.height(), r.width(), size().height() - r.y() - r.height());
        p.fillRect(r1, c);
        p.fillRect(r2, c);
        p.fillRect(r3, c);
        p.setBrush(Qt::NoBrush);
        p.save();
        if (d_ptr->m_dragHandle == QtGradientWidgetPrivate::CentralRadialHandle)
            p.setPen(dragPen);
        d_ptr->paintPoint(&p, d_ptr->m_centralRadial, d_ptr->m_handleSize);
        p.restore();

        QRectF rect = QRectF(central.x() - d_ptr->m_radiusRadial * size().width(),
                             central.y() - d_ptr->m_radiusRadial * size().height(),
                             2 * d_ptr->m_radiusRadial * size().width(),
                             2 * d_ptr->m_radiusRadial * size().height());
        p.setClipRect(r1);
        p.setClipRect(r2, Qt::UniteClip);
        p.setClipRect(r3, Qt::UniteClip);
        p.drawEllipse(rect);
        if (d_ptr->m_dragHandle == QtGradientWidgetPrivate::RadiusRadialHandle) {
            p.save();
            p.setPen(dragPen);
            QRectF rect = QRectF(central.x() - d_ptr->m_radiusRadial / d_ptr->m_radiusFactor * size().width(),
                                 central.y() - d_ptr->m_radiusRadial / d_ptr->m_radiusFactor * size().height(),
                                 2 * d_ptr->m_radiusRadial / d_ptr->m_radiusFactor * size().width(),
                                 2 * d_ptr->m_radiusRadial / d_ptr->m_radiusFactor * size().height());
            p.drawEllipse(rect);

            p.restore();
        }
        p.restore();

        p.save();
        if (d_ptr->m_dragHandle == QtGradientWidgetPrivate::FocalRadialHandle)
            p.setPen(dragPen);
        d_ptr->paintPoint(&p, d_ptr->m_focalRadial, 2 * d_ptr->m_handleSize / 3);
        p.restore();
    } else if (d_ptr->m_gradientType == QGradient::ConicalGradient) {
        double radius = size().width();
        if (size().height() < radius)
            radius = size().height();
        radius /= 2;
        double corr = d_ptr->m_handleSize / 3;
        radius -= corr;
        QPointF central = d_ptr->toViewport(d_ptr->m_centralConical);

        p.save();
        p.setBrush(Qt::NoBrush);
        QPen pen2(c);
        pen2.setWidthF(2 * d_ptr->m_handleSize / 3);
        p.setPen(pen2);
        p.drawEllipse(d_ptr->pointRect(central, 2 * radius));
        p.restore();

        p.save();
        p.setBrush(Qt::NoBrush);
        int pointCount = 2;
        for (int i = 0; i < pointCount; i++) {
            QPointF ang(cos(M_PI * (i * 180.0 / pointCount + d_ptr->m_angleConical) / 180) * size().width() / 2,
                        -sin(M_PI * (i * 180.0 / pointCount + d_ptr->m_angleConical) / 180) * size().height() / 2);
            double mod = sqrt(ang.x() * ang.x() + ang.y() * ang.y());
            p.drawLine(QPointF(central.x() + ang.x() * (radius - corr) / mod,
                               central.y() + ang.y() * (radius - corr) / mod),
                       QPointF(central.x() + ang.x() * (radius + corr) / mod,
                               central.y() + ang.y() * (radius + corr) / mod));
            p.drawLine(QPointF(central.x() - ang.x() * (radius - corr) / mod,
                               central.y() - ang.y() * (radius - corr) / mod),
                       QPointF(central.x() - ang.x() * (radius + corr) / mod,
                               central.y() - ang.y() * (radius + corr) / mod));
        }
        if (d_ptr->m_dragHandle == QtGradientWidgetPrivate::AngleConicalHandle) {
            p.save();
            p.setPen(dragPen);
            QPointF ang(cos(M_PI * (d_ptr->m_angleConical - d_ptr->m_angleOffset) / 180) * size().width() / 2,
                        -sin(M_PI * (d_ptr->m_angleConical - d_ptr->m_angleOffset) / 180) * size().height() / 2);
            double mod = sqrt(ang.x() * ang.x() + ang.y() * ang.y());
            p.drawLine(QPointF(central.x() + ang.x() * (radius - corr) / mod,
                               central.y() + ang.y() * (radius - corr) / mod),
                       QPointF(central.x() + ang.x() * (radius + corr) / mod,
                               central.y() + ang.y() * (radius + corr) / mod));
            p.restore();
        }

        p.restore();

        p.save();
        if (d_ptr->m_dragHandle == QtGradientWidgetPrivate::CentralConicalHandle)
            p.setPen(dragPen);
        d_ptr->paintPoint(&p, d_ptr->m_centralConical, d_ptr->m_handleSize);
        p.restore();

    }

    delete gradient;
}
void SceneImageExporter::PageGraphicsSceneToPrinter(QGraphicsScene *scene, QPrinter &printer,
                                                    QList<SectorRectHolder>& pageRegions, QString fileName,
                                                    QString documentName __attribute__((unused)))
{
    PrintingPreferences &pref  __attribute__ ((unused))  = PrintingPreferences::prefs();
    //qDebug()  << pref.yDivisions();
    //qDebug()  << pref.selectedMeasure();
    //qDebug() << pref.measures();

    if (!fileName.isEmpty() && fileName != "" && fileName.endsWith(".pdf",Qt::CaseInsensitive))
    {
        printer.setOutputFormat(QPrinter::PdfFormat);
        printer.setOutputFileName(fileName);
    }

    // When printing, use full page mode, IE ignore hardware margins. It's up
    // to users to set them as they desire.
    printer.setFullPage(true);
    printer.setPaperSize(QSizeF(PrintingPreferences::prefs().selectedMeasure().width(),
                                PrintingPreferences::prefs().selectedMeasure().height()),
                         QPrinter::Millimeter);
    printer.setPageMargins(PrintingPreferences::prefs().leftMargin(),
                           PrintingPreferences::prefs().topMargin(),
                           PrintingPreferences::prefs().rightMargin(),
                           PrintingPreferences::prefs().bottomMargin(),
                           QPrinter::Millimeter);

    //here, I print using selected sheets and divisions.
    QPainter painter(&printer);
    qreal left,top,right,bottom;
    printer.getPageMargins(&left,&top,&right,&bottom,QPrinter::DevicePixel);

    // get the FULL PAGE RECTANGLE and adjust margins.
    QRectF pageRect = printer.paperRect();
    pageRect.adjust(left,top,-right, -bottom);


    QColor transparent(0,0,0,0);
    QColor transBorder (0,0,0,128);
    QPen pen (transBorder);
    pen.setStyle(Qt::DotLine);
    QBrush brush;

    QGraphicsScene sceneFirst;
    QPen pen2 (QColor(0,0,0));
    pen2.setStyle(Qt::DotLine);
    pen2.setWidthF(2.0);
    QBrush brush2;
    for (int h = 0; h < pageRegions.count(); h++)
    {
        QRectF rect = pageRegions[h].rectInner();
        sceneFirst.addRect (rect.left(), rect.top(), rect.width(),rect.height(),pen2, brush2);
        rect = pageRegions[h].rectOuter();
        sceneFirst.addRect (rect.left(), rect.top(), rect.width(),rect.height(),pen2, brush2);
    }
    scene->render(&painter, pageRect, scene->itemsBoundingRect(),Qt::KeepAspectRatio);
    sceneFirst.render(&painter,pageRect, sceneFirst.sceneRect(),Qt::KeepAspectRatio);


    for (int h = 0; h < pageRegions.count(); h++)
    {
        QRectF rect = pageRegions[h].rectOuter();
        double ratio = rect.width()/rect.height();
        QRectF rectTarget = QRectF(pageRect.left(), pageRect.top(), pageRect.width(), pageRect.width()/ratio);
        printer.newPage();
        scene->render(&painter,rectTarget, rect);
        painter.setPen(pen2);
        painter.setBrush(brush);
        painter.drawRect(rectTarget);
        QRectF rect2 = pageRegions[h].rectInner();
        double ratioX = rectTarget.width()/rect.width();
        double ratioY = rectTarget.height()/rect.height();

        double dy = rect2.top()-rect.top();
        double dx = rect2.left() - rect.left();

        //qDebug() << "rect outer: " << rect
        //        <<  "\nrect inner: " << rect2
        //        << "\nrect target: " << rectTarget
        //        << "\nx: " << dx << ",y:" << dy;

        QRectF rectTarget2 (rectTarget.top()+ dx*ratioX,
                            rectTarget.left()+dy*ratioY,
                            rect2.width()*ratioX,
                            rect2.height()*ratioY);
        painter.drawRect(rectTarget2);

    }
    painter.end();
}
Esempio n. 27
0
void Hokuyo::paintEvent(QPaintEvent *event)
// display the data on the winder
{

    flag = 0;
	int center_h = (int) (this->parentWidget()->height() /2);
	int center_w = (int) (this->parentWidget()->width() /2);
    QPainter painter(this);

    //***************************************************************

        QPen pen2(Qt::black, 2, Qt::SolidLine);
        painter.setPen(pen2);
        painter.setBrush(Qt::red);
        QRectF rectangle(center_w - 2, center_h-2, 4, 4);
        painter.drawEllipse(rectangle);
    //*******************************************************

    if(showLRF) // if show laser range finder
    {
        QPen pen(Qt::black, 2, Qt::DashDotDotLine);

        painter.setPen(pen);

        painter.drawLine(20, 40, 120, 40);
    }

    else if(showIR) // if show small infrared sensor
    {
        QPen pen(Qt::black, 2, Qt::SolidLine);

        painter.setPen(pen);

        painter.drawLine(20, 40, 20 + center_h, 40);

    }
//**************************************************************
    if(showIR)
    {
        painter.setBrush(Qt::cyan);

        QPen pen1(Qt::black, 2, Qt::SolidLine);
	
	QPointF points_front[3];
	QPointF points_back[3];


	points_front[0] = QPointF(center_w,center_h);
	points_front[1] = QPointF(center_w - 50, center_h + (float)this->IR01_update * center_h);
	points_front[2] = QPointF(center_w + 50, center_h + (float)this->IR01_update * center_h);

    	painter.setPen(pen1);
    	painter.drawPolygon(points_front,3);

    	painter.setBrush(Qt::darkCyan);

	points_back[0] = QPointF(center_w, center_h);
	points_back[1] = QPointF(center_w - 50, center_h - (float)this->IR02_update * center_h);
	points_back[2] = QPointF(center_w + 50, center_h - (float)this->IR02_update * center_h);

    	painter.drawPolygon(points_back,3);
    }


    else if(showLRF)
    {
        QPen pen3(Qt::black, 2, Qt::DashDotDotLine);
        painter.setPen(pen3);

        int count = 0;

        if(hokuyo_points!=NULL)
        {
            for(int it=0;it<683;it++)
            {
                painter.drawPoint(hokuyo_points[it].x * 100 + 300, -(hokuyo_points[it].y * 100) + 300);
                if(showlines)
                painter.drawLine(300,300,hokuyo_points[it].x * 100 + 300, -(hokuyo_points[it].y * 100) + 300);
                count ++;
            }
        }

        flag = 1;
   }


}
void MyZKbMain::paintEvent(QPaintEvent * pe)
{	

  
  ZConfig Num(QString("numeros.cfg"), true);
  ZConfig ini(QString("skin.ini"), false);
  /*************/

  int X1 = ini.readNumEntry(QString("UBICACION"), QString("1_X"), 2);
  int X2 = ini.readNumEntry(QString("UBICACION"), QString("2_X"), 2);
  int X3 = ini.readNumEntry(QString("UBICACION"), QString("3_X"), 2);
  int X4 = ini.readNumEntry(QString("UBICACION"), QString("4_X"), 2);
  int X5 = ini.readNumEntry(QString("UBICACION"), QString("5_X"), 2);
  int X6 = ini.readNumEntry(QString("UBICACION"), QString("6_X"), 2);
  int X7 = ini.readNumEntry(QString("UBICACION"), QString("7_X"), 2);
  int X8 = ini.readNumEntry(QString("UBICACION"), QString("8_X"), 2);
  int X9 = ini.readNumEntry(QString("UBICACION"), QString("9_X"), 2);
  int X10 = ini.readNumEntry(QString("UBICACION"), QString("10_X"), 2);
  int X11 = ini.readNumEntry(QString("UBICACION"), QString("11_X"), 2);
  int X12 = ini.readNumEntry(QString("UBICACION"), QString("12_X"), 2);
  int X13 = ini.readNumEntry(QString("UBICACION"), QString("13_X"), 2);
  int X14 = ini.readNumEntry(QString("UBICACION"), QString("14_X"), 2);
  int X15 = ini.readNumEntry(QString("UBICACION"), QString("15_X"), 2);
  int X16 = ini.readNumEntry(QString("UBICACION"), QString("16_X"), 2);
  int X17 = ini.readNumEntry(QString("UBICACION"), QString("17_X"), 2);
  int X18 = ini.readNumEntry(QString("UBICACION"), QString("18_X"), 2);
  int X19 = ini.readNumEntry(QString("UBICACION"), QString("19_X"), 2);
  int X20 = ini.readNumEntry(QString("UBICACION"), QString("20_X"), 2);
  int X21 = ini.readNumEntry(QString("UBICACION"), QString("21_X"), 2);
  int X22 = ini.readNumEntry(QString("UBICACION"), QString("22_X"), 2);
  int X23 = ini.readNumEntry(QString("UBICACION"), QString("23_X"), 2);
  int X24 = ini.readNumEntry(QString("UBICACION"), QString("24_X"), 2);
  int X25 = ini.readNumEntry(QString("UBICACION"), QString("25_X"), 2);
  int X26 = ini.readNumEntry(QString("UBICACION"), QString("26_X"), 2);
  int X27 = ini.readNumEntry(QString("UBICACION"), QString("27_X"), 2);
  int X28 = ini.readNumEntry(QString("UBICACION"), QString("28_X"), 2);
  int X29 = ini.readNumEntry(QString("UBICACION"), QString("29_X"), 2);
  int X30 = ini.readNumEntry(QString("UBICACION"), QString("30_X"), 2);
  int X31 = ini.readNumEntry(QString("UBICACION"), QString("31_X"), 2);
  int X32 = ini.readNumEntry(QString("UBICACION"), QString("32_X"), 2);
  int X33 = ini.readNumEntry(QString("UBICACION"), QString("33_X"), 2);
  int X34 = ini.readNumEntry(QString("UBICACION"), QString("34_X"), 2);
  int X35 = ini.readNumEntry(QString("UBICACION"), QString("35_X"), 2);
  int X36 = ini.readNumEntry(QString("UBICACION"), QString("36_X"), 2);

  /*************/

  int Y1 = ini.readNumEntry(QString("UBICACION"), QString("1_Y"), 2);
  int Y2 = ini.readNumEntry(QString("UBICACION"), QString("2_Y"), 2);
  int Y3 = ini.readNumEntry(QString("UBICACION"), QString("3_Y"), 2);
  int Y4 = ini.readNumEntry(QString("UBICACION"), QString("4_Y"), 2);
  int Y5 = ini.readNumEntry(QString("UBICACION"), QString("5_Y"), 2);
  int Y6 = ini.readNumEntry(QString("UBICACION"), QString("6_Y"), 2);
  int Y7 = ini.readNumEntry(QString("UBICACION"), QString("7_Y"), 2);
  int Y8 = ini.readNumEntry(QString("UBICACION"), QString("8_Y"), 2);
  int Y9 = ini.readNumEntry(QString("UBICACION"), QString("9_Y"), 2);
  int Y10 = ini.readNumEntry(QString("UBICACION"), QString("10_Y"), 2);
  int Y11 = ini.readNumEntry(QString("UBICACION"), QString("11_Y"), 2);
  int Y12 = ini.readNumEntry(QString("UBICACION"), QString("12_Y"), 2);
  int Y13 = ini.readNumEntry(QString("UBICACION"), QString("13_Y"), 2);
  int Y14 = ini.readNumEntry(QString("UBICACION"), QString("14_Y"), 2);
  int Y15 = ini.readNumEntry(QString("UBICACION"), QString("15_Y"), 2);
  int Y16 = ini.readNumEntry(QString("UBICACION"), QString("16_Y"), 2);
  int Y17 = ini.readNumEntry(QString("UBICACION"), QString("17_Y"), 2);
  int Y18 = ini.readNumEntry(QString("UBICACION"), QString("18_Y"), 2);
  int Y19 = ini.readNumEntry(QString("UBICACION"), QString("19_Y"), 2);
  int Y20 = ini.readNumEntry(QString("UBICACION"), QString("20_Y"), 2);
  int Y21 = ini.readNumEntry(QString("UBICACION"), QString("21_Y"), 2);
  int Y22 = ini.readNumEntry(QString("UBICACION"), QString("22_Y"), 2);
  int Y23 = ini.readNumEntry(QString("UBICACION"), QString("23_Y"), 2);
  int Y24 = ini.readNumEntry(QString("UBICACION"), QString("24_Y"), 2);
  int Y25 = ini.readNumEntry(QString("UBICACION"), QString("25_Y"), 2);
  int Y26 = ini.readNumEntry(QString("UBICACION"), QString("26_Y"), 2);
  int Y27 = ini.readNumEntry(QString("UBICACION"), QString("27_Y"), 2);
  int Y28 = ini.readNumEntry(QString("UBICACION"), QString("28_Y"), 2);
  int Y29 = ini.readNumEntry(QString("UBICACION"), QString("29_Y"), 2);
  int Y30 = ini.readNumEntry(QString("UBICACION"), QString("30_Y"), 2);
  int Y31 = ini.readNumEntry(QString("UBICACION"), QString("31_Y"), 2);
  int Y32 = ini.readNumEntry(QString("UBICACION"), QString("32_Y"), 2);
  int Y33 = ini.readNumEntry(QString("UBICACION"), QString("33_Y"), 2);
  int Y34 = ini.readNumEntry(QString("UBICACION"), QString("34_Y"), 2);
  int Y35 = ini.readNumEntry(QString("UBICACION"), QString("35_Y"), 2);
  int Y36 = ini.readNumEntry(QString("UBICACION"), QString("36_Y"), 2);

  /*************/


  if(!flag_loading)
    {
	QPixmap	pix;
	pix=myimg;
	QRect ur(0,0,240,320);
	ur=pe->rect();
	QPainter p(&pix);
	p.begin(&pix);
	QPainter p2(&pix);
	p2.begin(&pix);

	QPen pen(QColor(255,0,0) ); p.setPen(pen);
	QPen pen2(QColor(255,255,255) ); p2.setPen(pen2);

	if ( current == 1 ) { p.drawRect(X1, Y1, 40, 27); } 
	if ( current == 2 ) { p.drawRect(X2, Y2, 40, 27); } 
	if ( current == 3 ) { p.drawRect(X3, Y3, 40, 27); } 
	if ( current == 4 ) { p.drawRect(X4, Y4, 40, 27); } 
	if ( current == 5 ) { p.drawRect(X5, Y5, 40, 27); } 
	if ( current == 6 ) { p.drawRect(X6, Y6, 40, 27); } 
	if ( current == 7 ) { p.drawRect(X7, Y7, 40, 27); } 
	if ( current == 8 ) { p.drawRect(X8, Y8, 40, 27); } 
	if ( current == 9 ) { p.drawRect(X9, Y9, 40, 27); } 
	if ( current == 10 ) { p.drawRect(X10, Y10, 40, 27); } 
	if ( current == 11 ) { p.drawRect(X11, Y11, 40, 27); } 
	if ( current == 12 ) { p.drawRect(X12, Y12, 40, 27); } 
	if ( current == 13 ) { p.drawRect(X13, Y13, 40, 27); } 
	if ( current == 14 ) { p.drawRect(X14, Y14, 40, 27); } 
	if ( current == 15 ) { p.drawRect(X15, Y15, 40, 27); } 
	if ( current == 16 ) { p.drawRect(X16, Y16, 40, 27); } 
	if ( current == 17 ) { p.drawRect(X17, Y17, 40, 27); } 
	if ( current == 18 ) { p.drawRect(X18, Y18, 40, 27); } 
	if ( current == 19 ) { p.drawRect(X19, Y19, 40, 27); } 
	if ( current == 20 ) { p.drawRect(X20, Y20, 40, 27); } 
	if ( current == 21 ) { p.drawRect(X21, Y21, 40, 27); } 
	if ( current == 22 ) { p.drawRect(X22, Y22, 40, 27); } 
	if ( current == 23 ) { p.drawRect(X23, Y23, 40, 27); } 
	if ( current == 24 ) { p.drawRect(X24, Y24, 40, 27); } 
	if ( current == 25 ) { p.drawRect(X25, Y25, 40, 27); } 
	if ( current == 26 ) { p.drawRect(X26, Y26, 40, 27); } 
	if ( current == 27 ) { p.drawRect(X27, Y27, 40, 27); } 
	if ( current == 28 ) { p.drawRect(X28, Y28, 40, 27); } 
	if ( current == 29 ) { p.drawRect(X29, Y29, 40, 27); } 
	if ( current == 30 ) { p.drawRect(X30, Y30, 40, 27); } 
	if ( current == 31 ) { p.drawRect(X31, Y31, 40, 27); } 
	if ( current == 32 ) { p.drawRect(X32, Y32, 40, 27); } 
	if ( current == 33 ) { p.drawRect(X33, Y33, 40, 27); } 
	if ( current == 34 ) { p.drawRect(X34, Y34, 40, 27); } 
	if ( current == 35 ) { p.drawRect(X35, Y35, 40, 27); } 
	if ( current == 36 ) { p.drawRect(X36, Y36, 40, 27); } 

	if ( calcular==1 ) 
	{
		int valx; lista.clear();
		valx=1; Probabilidad(valx);
		valx=2; Probabilidad(valx);
		valx=4; Probabilidad(valx);
		valx=5; Probabilidad(valx);
		valx=7; Probabilidad(valx);
		valx=8; Probabilidad(valx);
		valx=10; Probabilidad(valx);
		valx=11; Probabilidad(valx);
		valx=13; Probabilidad(valx);
		valx=14; Probabilidad(valx);
		valx=16; Probabilidad(valx);
		valx=17; Probabilidad(valx);
		valx=19; Probabilidad(valx);
		valx=20; Probabilidad(valx);
		valx=22; Probabilidad(valx);
		valx=23; Probabilidad(valx);
		valx=25; Probabilidad(valx);
		valx=26; Probabilidad(valx);
		valx=28; Probabilidad(valx);
		valx=29; Probabilidad(valx);
		valx=31; Probabilidad(valx);
		valx=32; Probabilidad(valx);
		calcular=0;
	}

	int i=1; int j=1; QString stop="NO"; QString numero;
	while ( j<36 )
	{
		update();
		int number = Num.readNumEntry(QString("NUMEROS"), QString("%1").arg(j), 0 ); numero=""; for(int k=0;k<number;++k) { numero+=QString("."); }
		if ( number != 0 ) { p2.drawText(22, (25*i)+i*2/3+3, QString("%1").arg(numero), 50, QPainter::NONE); }
		j++;
		number = Num.readNumEntry(QString("NUMEROS"), QString("%1").arg(j), 0 ); numero=""; for(int k=0;k<number;++k) { numero+=QString("."); }
		if ( number != 0 ) { p2.drawText(61, (25*i)+i*2/3+3, QString("%1").arg(numero), 50, QPainter::NONE); }
		j++;
		number = Num.readNumEntry(QString("NUMEROS"), QString("%1").arg(j), 0 ); numero=""; for(int k=0;k<number;++k) { numero+=QString("."); }
		if ( number != 0 ) { p2.drawText(99, (25*i)+i*2/3+3, QString("%1").arg(numero), 50, QPainter::NONE); }
		i++; j++;
		if ( j==36 ) { stop="YES"; }
	}
	
	QString pr1,pr2,pr3,pr4; int cp=1;
	for ( int j=0 ; j < lista.count(); ++j ) { 
	  if ( cp <= 4 ) { pr1 += QString("%1 ").arg(lista[j]); }
	  else if ( (cp>=5) && (cp<=8) ) { pr2 += QString("%1 ").arg(lista[j]); }
	  else if ( (cp>=9) && (cp<=12) ) { pr3 += QString("%1 ").arg(lista[j]); }
	  else if ( (cp>=13) && (cp<=16) ) { pr4 += QString("%1 ").arg(lista[j]); }
	  ++cp;
	}
	p2.drawText(136, 240, QString("%1").arg(pr1), 50, QPainter::NONE);
	p2.drawText(136, 265, QString("%1").arg(pr2), 50, QPainter::NONE);
	p2.drawText(136, 290, QString("%1").arg(pr3), 50, QPainter::NONE);
	p2.drawText(136, 315, QString("%1").arg(pr4), 50, QPainter::NONE);

	jugadas=0;
	for ( int k=1 ; k < 37; ++k ) { int number = Num.readNumEntry(QString("NUMEROS"), QString("%1").arg(k), 0 ); jugadas +=number; }
	p2.drawText(136, 165, QString("%1").arg(jugadas), 50, QPainter::NONE);

	p.end();
	p2.end();


	setWFlags(getWFlags() | Qt::WRepaintNoErase);
	bitBlt(   this,  start_x , start_y  ,  &pix,   0,   0,   -1,   -1   ); 
    }
	QWidget::paintEvent( pe);
}
Esempio n. 29
0
void CSkinButton2::DrawFrame(Gdiplus::Graphics& gdi,CRect& rect)
{
	if( m_enmuDrawType == NO_FRAME )
	{
		Gdiplus::Pen pen1( m_colFrame1 );
		gdi.DrawLine( &pen1, rect.left+1, rect.top, rect.right-2, rect.top );
		gdi.DrawLine( &pen1, rect.left+1, rect.bottom-1, rect.right-2, rect.bottom-1 );
		gdi.DrawLine( &pen1, rect.left, rect.top+1, rect.left, rect.bottom-2 );
		gdi.DrawLine( &pen1, rect.right-1, rect.top+1, rect.right-1, rect.bottom-2 );

		Gdiplus::Color colpix;
		pen1.GetColor( &colpix );
		colpix.SetValue( Gdiplus::Color::MakeARGB(colpix.GetA()/2,colpix.GetR(),colpix.GetG(),colpix.GetB() ) );
		Gdiplus::Pen penPix1( colpix );
		gdi.DrawLine( &penPix1, rect.left, rect.top, rect.left+1, rect.top );
		gdi.DrawLine( &penPix1, rect.right-1, rect.top, rect.right-1, rect.top+1 );
		gdi.DrawLine( &penPix1, rect.right-1, rect.bottom-1, rect.right-2, rect.bottom-1 );
		gdi.DrawLine( &penPix1, rect.left,  rect.bottom-1, rect.left+1,  rect.bottom-1 );

		CRect rect2 = rect;
		::InflateRect( &rect2, -1,-1 );
		if( !m_bMouseDown )
		{
			Gdiplus::Pen pen2(m_colFrame2);
			if( m_bMouseDown )
				pen2.SetColor(m_colFrame1);
			else
				pen2.SetColor(m_colFrame2);

			gdi.DrawLine( &pen2, rect2.left+1, rect2.top, rect2.right-2, rect2.top );
			gdi.DrawLine( &pen2, rect2.left+1, rect2.bottom-1, rect2.right-2, rect2.bottom-1 );
			gdi.DrawLine( &pen2, rect2.left, rect2.top+1, rect2.left, rect2.bottom-2 );
			gdi.DrawLine( &pen2, rect2.right-1, rect2.top+1, rect2.right-1, rect2.bottom-2 );

			Gdiplus::Color colpix2;
			pen2.GetColor( &colpix2 );
			colpix2.SetValue( Gdiplus::Color::MakeARGB(colpix2.GetA()/2,colpix2.GetR(),colpix2.GetG(),colpix2.GetB() ) );
			Gdiplus::Pen penPix2( colpix2 );
			gdi.DrawLine( &penPix2, rect2.left, rect2.top, rect2.left+1, rect2.top );
			gdi.DrawLine( &penPix2, rect2.right-1, rect2.top, rect2.right-1, rect2.top+1 );
			gdi.DrawLine( &penPix2, rect2.right-1, rect2.bottom-1, rect2.right-2, rect2.bottom-1 );
			gdi.DrawLine( &penPix2, rect2.left,  rect2.bottom-1, rect2.left+1,  rect2.bottom-1 );
		}

		if( m_bMouseDown )
		{
			Gdiplus::RectF rc( rect2.left, rect2.top, rect2.Width(), rect2.Height()/3 );
			Gdiplus::Color colBrush1,colBrush2;
			colBrush1.SetValue( Gdiplus::Color::MakeARGB(15,1,1,1)  );
			colBrush2.SetValue( Gdiplus::Color::MakeARGB(0,1,1,1)  );

			LinearGradientBrush brush( rc, colBrush1, colBrush2,LinearGradientModeVertical );
			gdi.FillRectangle( &brush, rc );
		}
		else
		{
			Gdiplus::RectF rc( rect2.left, rect2.top, rect2.Width(), rect2.Height()/2 );
			rc.Inflate(-1,-1);
			LinearGradientBrush brush( rc, m_colBrush1, m_colBrush2,LinearGradientModeVertical );
			gdi.FillRectangle( &brush, rc );
		}

		return;
	}
	else if( m_enmuDrawType == NO_FRAME_SELECT )
	{
		Gdiplus::Pen pen1( m_colFrame1 );
		gdi.DrawLine( &pen1, rect.left+1, rect.top, rect.right-2, rect.top );
		gdi.DrawLine( &pen1, rect.left+1, rect.bottom-1, rect.right-2, rect.bottom-1 );
		gdi.DrawLine( &pen1, rect.left, rect.top+1, rect.left, rect.bottom-2 );
		gdi.DrawLine( &pen1, rect.right-1, rect.top+1, rect.right-1, rect.bottom-2 );

		Gdiplus::Color colpix;
		pen1.GetColor( &colpix );
		colpix.SetValue( Gdiplus::Color::MakeARGB(colpix.GetA()/2,colpix.GetR(),colpix.GetG(),colpix.GetB() ) );
		Gdiplus::Pen penPix1( colpix );
		gdi.DrawLine( &penPix1, rect.left, rect.top, rect.left+1, rect.top );
		gdi.DrawLine( &penPix1, rect.right-1, rect.top, rect.right-1, rect.top+1 );
		gdi.DrawLine( &penPix1, rect.right-1, rect.bottom-1, rect.right-2, rect.bottom-1 );
		gdi.DrawLine( &penPix1, rect.left,  rect.bottom-1, rect.left+1,  rect.bottom-1 );

		CRect rect2 = rect;
		::InflateRect( &rect2, -1,-1 );
		if( !m_bMouseDown )
		{
			Gdiplus::Pen pen2(m_colFrame2);
			if( m_bMouseDown )
				pen2.SetColor(m_colFrame1);
			else
				pen2.SetColor(m_colFrame2);

			gdi.DrawLine( &pen2, rect2.left+1, rect2.top, rect2.right-2, rect2.top );
			gdi.DrawLine( &pen2, rect2.left+1, rect2.bottom-1, rect2.right-2, rect2.bottom-1 );
			gdi.DrawLine( &pen2, rect2.left, rect2.top+1, rect2.left, rect2.bottom-2 );
			gdi.DrawLine( &pen2, rect2.right-1, rect2.top+1, rect2.right-1, rect2.bottom-2 );

			Gdiplus::Color colpix2;
			pen2.GetColor( &colpix2 );
			colpix2.SetValue( Gdiplus::Color::MakeARGB(colpix2.GetA()/2,colpix2.GetR(),colpix2.GetG(),colpix2.GetB() ) );
			Gdiplus::Pen penPix2( colpix2 );
			gdi.DrawLine( &penPix2, rect2.left, rect2.top, rect2.left+1, rect2.top );
			gdi.DrawLine( &penPix2, rect2.right-1, rect2.top, rect2.right-1, rect2.top+1 );
			gdi.DrawLine( &penPix2, rect2.right-1, rect2.bottom-1, rect2.right-2, rect2.bottom-1 );
			gdi.DrawLine( &penPix2, rect2.left,  rect2.bottom-1, rect2.left+1,  rect2.bottom-1 );
		}

	/*	if( m_bMouseDown )
		{
			Gdiplus::RectF rc( rect2.left, rect2.top, rect2.Width(), rect2.Height()/3 );
			Gdiplus::Color colBrush1,colBrush2;
			colBrush1.SetValue( Gdiplus::Color::MakeARGB(15,1,1,1)  );
			colBrush2.SetValue( Gdiplus::Color::MakeARGB(0,1,1,1)  );

			LinearGradientBrush brush( rc, colBrush1, colBrush2,LinearGradientModeVertical );
			gdi.FillRectangle( &brush, rc );
		}
		else
		{
			Gdiplus::RectF rc( rect2.left, rect2.top, rect2.Width(), rect2.Height()/2 );
			rc.Inflate(-1,-1);
			LinearGradientBrush brush( rc, m_colBrush1, m_colBrush2,LinearGradientModeVertical );
			gdi.FillRectangle( &brush, rc );
		}*/

		CRect rect3 = rect2;
		::InflateRect( &rect3, -1,-1 );
		Gdiplus::RectF rc( rect3.left, rect3.top, rect3.Width(), rect3.Height() );
		LinearGradientBrush brush( rc, m_colBK, m_colBK,LinearGradientModeVertical );
		gdi.FillRectangle( &brush, rc );

		Gdiplus::Color colBlack1 = Gdiplus::Color::MakeARGB(30,50,50,50);
		Gdiplus::Color colBlack2 = Gdiplus::Color::MakeARGB(15,50,50,50);
	    Gdiplus::RectF rc1( rect3.left, rect3.top+rect3.Height()/2, rect3.Width(), rect3.Height()/2 );
		LinearGradientBrush brush2( rc1, colBlack1, colBlack2,LinearGradientModeVertical );
		gdi.FillRectangle( &brush2, rc1 );
		return;
	}
	if( m_enmuDrawType == TOP_ARC )
	{
		Gdiplus::Pen pen1( m_colFrame1 );
		gdi.DrawLine( &pen1, rect.left+5, rect.top, rect.right-7, rect.top );
		gdi.DrawLine( &pen1, rect.left, rect.bottom-1, rect.right, rect.bottom-1 );
		gdi.DrawLine( &pen1, rect.left, rect.top+5, rect.left, rect.bottom-2 );
		gdi.DrawLine( &pen1, rect.right-1, rect.top+5, rect.right-1, rect.bottom-2 );

		CRect rect2 = rect;
		::InflateRect( &rect2, -1,-1 );
		if( !m_bMouseDown )
		{
			Gdiplus::Pen pen2(m_colFrame2);
			gdi.DrawLine( &pen2, rect2.left+4, rect2.top, rect2.right-5, rect2.top );
			gdi.DrawLine( &pen2, rect2.left, rect2.bottom-1, rect2.right-1, rect2.bottom-1 );
			gdi.DrawLine( &pen2, rect2.left, rect2.top+4, rect2.left, rect2.bottom-2 );
			gdi.DrawLine( &pen2, rect2.right-1, rect2.top+4, rect2.right-1, rect2.bottom-2 );

			Gdiplus::RectF rectLeftTop2;
			rectLeftTop2.X = rect2.left;
			rectLeftTop2.Y  = rect2.top;
			rectLeftTop2.Width = 6;
			rectLeftTop2.Height  = 6;
			gdi.DrawArc(  &pen2, rectLeftTop2,180,90 );

			Gdiplus::RectF rectRightTop2;
			rectRightTop2.X = rect2.right-7;
			rectRightTop2.Y  = rect2.top;
			rectRightTop2.Width = 6;
			rectRightTop2.Height  = 6;
			gdi.DrawArc(  &pen2, rectRightTop2,270,90 );
		}

		Gdiplus::RectF rectLeftTop;
		rectLeftTop.X = rect.left;
		rectLeftTop.Y  = rect.top;
		rectLeftTop.Width = 9;
		rectLeftTop.Height  = 9;
		gdi.DrawArc(  &pen1, rectLeftTop,180,90 );

		Gdiplus::RectF rectRightTop;
		rectRightTop.X = rect.right-10;
		rectRightTop.Y  = rect.top;
		rectRightTop.Width = 9;
		rectRightTop.Height  = 9;
		gdi.DrawArc(  &pen1, rectRightTop,270,90 );

		/*Gdiplus::SolidBrush sb( m_colBrush );
		Gdiplus::Brush *pbrush = sb.Clone();*/
		if( m_bMouseDown )
		{
			Gdiplus::RectF rc( rect2.left, rect2.top, rect2.Width(), rect2.Height()/3 );
			Gdiplus::Color colBrush1,colBrush2;
			colBrush1.SetValue( Gdiplus::Color::MakeARGB(15,1,1,1)  );
			colBrush2.SetValue( Gdiplus::Color::MakeARGB(0,1,1,1)  );

			LinearGradientBrush brush( rc, colBrush1, colBrush2,LinearGradientModeVertical );
			gdi.FillRectangle( &brush, rc );
		}
		else
		{
			Gdiplus::RectF rc( rect2.left, rect2.top, rect2.Width(), rect2.Height()/2 );
			rc.Inflate(-1,-1);
			LinearGradientBrush brush( rc, m_colBrush1, m_colBrush2,LinearGradientModeVertical );
			gdi.FillRectangle( &brush, rc );
		}
	}
	else if( m_enmuDrawType == BOTTON_ARC )
	{
	}
	else if( m_enmuDrawType == RIGHT_ARC )
	{
	}
	else if( m_enmuDrawType == LEFT_ARC )
	{
	}
	else if( m_enmuDrawType & (TOP_ARC|BOTTON_ARC) || m_enmuDrawType & (RIGHT_ARC|LEFT_ARC) )
	{
		// 四角都有弧线
	}

	//gdi.DrawString(
}
Esempio n. 30
0
void CTextToolView::OnDraw(CDC* pDC)
{
  CTextToolDoc* pDoc = GetDocument();
  ASSERT_VALID(pDoc);
  // TODO: add draw code for native data here

  if (iLogicalPixelsY == -1) {
    iLogicalPixelsY = pDC->GetDeviceCaps(LOGPIXELSY);

    LOGFONT rLogFont;
    m_pFont->GetLogFont(&rLogFont);
    m_iFontPointSize = -((rLogFont.lfHeight*72)/iLogicalPixelsY);
  }

  CBrush brush(RGB(0,0,0));

  pDC->SetBkMode(OPAQUE);
  RECT	rect;
  GetWindowRect(&rect);
//pDC->GetBoundsRect(&rect,0);
  pDC->FillRect(&rect,&brush);

  // just in case
  rect.top = 0;
  rect.bottom = 1024;
  rect.left = 0;
  rect.right = 1024;
  pDC->FillRect(&rect,&brush);

  pDC->SetBkMode(TRANSPARENT );
  pDC->SetTextColor(RGB(255,255,255));
  pDC->SetBkColor(RGB(0,0,0));
  pDC->SelectObject(m_pFont);

  CPen pen(PS_SOLID,1,RGB(128,128,128));
  CPen pen2(PS_SOLID,1,RGB(64,64,255));
  pDC->SelectObject(pen);

  CString szString = " !\"#$%'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ{\\]^_`abcdefghijklmnopqrstuvwxyz{|}~";
  pDC->GetCharABCWidths(' ','~',m_aWidths);

  LOGFONT rLogFont;

  m_pFont->GetLogFont(&rLogFont);

  CSize size = pDC->GetTextExtent(szString);

  m_iCharacterHeight = abs(rLogFont.lfHeight);
  m_iTextureZStep = size.cy; //-rLogFont.lfHeight+2;

  int iXPos = 0;
  int iYPos = 0;

  int iXCount = 0;
  for (int iChar = ' '; iChar <= '~'; iChar++) {
    int iThisItem = iChar - ' ';
    int iThisPos = iXPos - m_aWidths[iThisItem].abcA;
    int iEndPos = iXCount + m_iTextureZStep; //m_aWidths[iChar-' '].abcB;

    if (iEndPos >= m_iMaxTextureWidth) {
      iXPos = 0;
      iXCount = 0;
      iThisPos = iXPos - m_aWidths[iThisItem].abcA;
      iEndPos = iXCount + m_iTextureZStep; //m_aWidths[iChar-' '].abcB;
      iYPos += m_iTextureZStep;
    }

    CString string = (char)iChar;

    pDC->TextOut(iThisPos, iYPos, string);

    m_arGlyphExtents[iThisItem].iStartX = iXCount;
    m_arGlyphExtents[iThisItem].iEndX = iXCount + m_aWidths[iThisItem].abcB;
    m_arGlyphExtents[iThisItem].iStartY = iYPos;
    m_arGlyphExtents[iThisItem].iEndY = iYPos + m_iTextureZStep;

    pDC->SelectObject(pen);

    iXPos = iEndPos;
    iXCount += m_iTextureZStep;
  }

  m_iMaxY = iYPos +m_iTextureZStep;
  pDC->SelectStockObject(SYSTEM_FONT);
  pDC->SelectStockObject(WHITE_PEN);
}