/*
* pg_fe_sendauth
* client demux routine for outgoing authentication information
*/
int
pg_fe_sendauth(AuthRequest areq, PGconn *conn, const char *hostname,
const char *password, char *PQerrormsg)
{
#ifndef KRB5
(void) hostname; /* not used */
#endif
switch (areq)
{
case AUTH_REQ_OK:
break;
case AUTH_REQ_KRB4:
snprintf(PQerrormsg, PQERRORMSG_LENGTH,
libpq_gettext("Kerberos 4 authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_KRB5:
#ifdef KRB5
pglock_thread();
if (pg_krb5_sendauth(PQerrormsg, conn->sock,
hostname, conn->krbsrvname) != STATUS_OK)
{
/* PQerrormsg already filled in */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
break;
#else
snprintf(PQerrormsg, PQERRORMSG_LENGTH,
libpq_gettext("Kerberos 5 authentication not supported\n"));
return STATUS_ERROR;
#endif
case AUTH_REQ_MD5:
case AUTH_REQ_CRYPT:
case AUTH_REQ_PASSWORD:
if (password == NULL || *password == '\0')
{
(void) snprintf(PQerrormsg, PQERRORMSG_LENGTH,
PQnoPasswordSupplied);
return STATUS_ERROR;
}
if (pg_password_sendauth(conn, password, areq) != STATUS_OK)
{
(void) snprintf(PQerrormsg, PQERRORMSG_LENGTH,
"fe_sendauth: error sending password authentication\n");
return STATUS_ERROR;
}
break;
case AUTH_REQ_SCM_CREDS:
if (pg_local_sendauth(PQerrormsg, conn) != STATUS_OK)
return STATUS_ERROR;
break;
default:
snprintf(PQerrormsg, PQERRORMSG_LENGTH,
libpq_gettext("authentication method %u not supported\n"), areq);
return STATUS_ERROR;
}
return STATUS_OK;
}
/*
* pg_fe_sendauth
* client demux routine for outgoing authentication information
*/
int
pg_fe_sendauth(AuthRequest areq, PGconn *conn)
{
switch (areq)
{
case AUTH_REQ_OK:
break;
case AUTH_REQ_KRB4:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 4 authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_KRB5:
#ifdef KRB5
pglock_thread();
if (pg_krb5_sendauth(conn) != STATUS_OK)
{
/* Error message already filled in */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
break;
#else
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 5 authentication not supported\n"));
return STATUS_ERROR;
#endif
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
case AUTH_REQ_GSS:
{
int r;
pglock_thread();
/*
* If we have both GSS and SSPI support compiled in, use SSPI
* support by default. This is overridable by a connection
* string parameter. Note that when using SSPI we still leave
* the negotiate parameter off, since we want SSPI to use the
* GSSAPI kerberos protocol. For actual SSPI negotiate
* protocol, we use AUTH_REQ_SSPI.
*/
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->gsslib && (pg_strcasecmp(conn->gsslib, "gssapi") == 0))
r = pg_GSS_startup(conn);
else
r = pg_SSPI_startup(conn, 0);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_startup(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_startup(conn, 0);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
case AUTH_REQ_GSS_CONT:
{
int r;
pglock_thread();
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->usesspi)
r = pg_SSPI_continue(conn);
else
r = pg_GSS_continue(conn);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_continue(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_continue(conn);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
#else
case AUTH_REQ_GSS:
case AUTH_REQ_GSS_CONT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("GSSAPI authentication not supported\n"));
return STATUS_ERROR;
#endif
#ifdef ENABLE_SSPI
case AUTH_REQ_SSPI:
/*
* SSPI has it's own startup message so libpq can decide which
* method to use. Indicate to pg_SSPI_startup that we want SSPI
* negotiation instead of Kerberos.
*/
pglock_thread();
if (pg_SSPI_startup(conn, 1) != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
break;
#else
case AUTH_REQ_SSPI:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("SSPI authentication not supported\n"));
return STATUS_ERROR;
#endif
case AUTH_REQ_CRYPT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Crypt authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_MD5:
case AUTH_REQ_PASSWORD:
conn->password_needed = true;
if (conn->pgpass == NULL || conn->pgpass[0] == '\0')
{
printfPQExpBuffer(&conn->errorMessage,
PQnoPasswordSupplied);
return STATUS_ERROR;
}
if (pg_password_sendauth(conn, conn->pgpass, areq) != STATUS_OK)
{
printfPQExpBuffer(&conn->errorMessage,
"fe_sendauth: error sending password authentication\n");
return STATUS_ERROR;
}
break;
case AUTH_REQ_SCM_CREDS:
if (pg_local_sendauth(conn) != STATUS_OK)
return STATUS_ERROR;
break;
default:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("authentication method %u not supported\n"), areq);
return STATUS_ERROR;
}
return STATUS_OK;
}
/*
* pg_fe_sendauth
* client demux routine for outgoing authentication information
*/
int
pg_fe_sendauth(AuthRequest areq, PGconn *conn)
{
switch (areq)
{
case AUTH_REQ_OK:
break;
case AUTH_REQ_KRB4:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 4 authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_KRB5:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Kerberos 5 authentication not supported\n"));
return STATUS_ERROR;
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
case AUTH_REQ_GSS:
#if !defined(ENABLE_SSPI)
/* no native SSPI, so use GSSAPI library for it */
case AUTH_REQ_SSPI:
#endif
{
int r;
pglock_thread();
/*
* If we have both GSS and SSPI support compiled in, use SSPI
* support by default. This is overridable by a connection
* string parameter. Note that when using SSPI we still leave
* the negotiate parameter off, since we want SSPI to use the
* GSSAPI kerberos protocol. For actual SSPI negotiate
* protocol, we use AUTH_REQ_SSPI.
*/
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->gsslib && (pg_strcasecmp(conn->gsslib, "gssapi") == 0))
r = pg_GSS_startup(conn);
else
r = pg_SSPI_startup(conn, 0);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_startup(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_startup(conn, 0);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
case AUTH_REQ_GSS_CONT:
{
int r;
pglock_thread();
#if defined(ENABLE_GSS) && defined(ENABLE_SSPI)
if (conn->usesspi)
r = pg_SSPI_continue(conn);
else
r = pg_GSS_continue(conn);
#elif defined(ENABLE_GSS) && !defined(ENABLE_SSPI)
r = pg_GSS_continue(conn);
#elif !defined(ENABLE_GSS) && defined(ENABLE_SSPI)
r = pg_SSPI_continue(conn);
#endif
if (r != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
}
break;
#else /* defined(ENABLE_GSS) || defined(ENABLE_SSPI) */
/* No GSSAPI *or* SSPI support */
case AUTH_REQ_GSS:
case AUTH_REQ_GSS_CONT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("GSSAPI authentication not supported\n"));
return STATUS_ERROR;
#endif /* defined(ENABLE_GSS) || defined(ENABLE_SSPI) */
#ifdef ENABLE_SSPI
case AUTH_REQ_SSPI:
/*
* SSPI has it's own startup message so libpq can decide which
* method to use. Indicate to pg_SSPI_startup that we want SSPI
* negotiation instead of Kerberos.
*/
pglock_thread();
if (pg_SSPI_startup(conn, 1) != STATUS_OK)
{
/* Error message already filled in. */
pgunlock_thread();
return STATUS_ERROR;
}
pgunlock_thread();
break;
#else
/*
* No SSPI support. However, if we have GSSAPI but not SSPI
* support, AUTH_REQ_SSPI will have been handled in the codepath
* for AUTH_REQ_GSSAPI above, so don't duplicate the case label in
* that case.
*/
#if !defined(ENABLE_GSS)
case AUTH_REQ_SSPI:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("SSPI authentication not supported\n"));
return STATUS_ERROR;
#endif /* !define(ENABLE_GSSAPI) */
#endif /* ENABLE_SSPI */
case AUTH_REQ_CRYPT:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("Crypt authentication not supported\n"));
return STATUS_ERROR;
case AUTH_REQ_MD5:
case AUTH_REQ_PASSWORD:
{
char *password = conn->connhost[conn->whichhost].password;
if (password == NULL)
password = conn->pgpass;
conn->password_needed = true;
if (password == NULL || password[0] == '\0')
{
printfPQExpBuffer(&conn->errorMessage,
PQnoPasswordSupplied);
return STATUS_ERROR;
}
if (pg_password_sendauth(conn, password, areq) != STATUS_OK)
{
printfPQExpBuffer(&conn->errorMessage,
"fe_sendauth: error sending password authentication\n");
return STATUS_ERROR;
}
break;
}
case AUTH_REQ_SCM_CREDS:
if (pg_local_sendauth(conn) != STATUS_OK)
return STATUS_ERROR;
break;
default:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("authentication method %u not supported\n"), areq);
return STATUS_ERROR;
}
return STATUS_OK;
}
