/*
* AP cpu's call this to sync up protected mode.
*
* WARNING! We must ensure that the cpu is sufficiently initialized to
* be able to use to the FP for our optimized bzero/bcopy code before
* we enter more mainstream C code.
*
* WARNING! %fs is not set up on entry. This routine sets up %fs.
*/
void
init_secondary(void)
{
int gsel_tss;
int x, myid = bootAP;
u_int cr0;
struct mdglobaldata *md;
struct privatespace *ps;
ps = &CPU_prvspace[myid];
gdt_segs[GPRIV_SEL].ssd_base = (int)ps;
gdt_segs[GPROC0_SEL].ssd_base =
(int) &ps->mdglobaldata.gd_common_tss;
ps->mdglobaldata.mi.gd_prvspace = ps;
for (x = 0; x < NGDT; x++) {
ssdtosd(&gdt_segs[x], &gdt[myid * NGDT + x].sd);
}
r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
r_gdt.rd_base = (int) &gdt[myid * NGDT];
lgdt(&r_gdt); /* does magic intra-segment return */
lidt(&r_idt);
lldt(_default_ldt);
mdcpu->gd_currentldt = _default_ldt;
gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
gdt[myid * NGDT + GPROC0_SEL].sd.sd_type = SDT_SYS386TSS;
md = mdcpu; /* loaded through %fs:0 (mdglobaldata.mi.gd_prvspace)*/
md->gd_common_tss.tss_esp0 = 0; /* not used until after switch */
md->gd_common_tss.tss_ss0 = GSEL(GDATA_SEL, SEL_KPL);
md->gd_common_tss.tss_ioopt = (sizeof md->gd_common_tss) << 16;
md->gd_tss_gdt = &gdt[myid * NGDT + GPROC0_SEL].sd;
md->gd_common_tssd = *md->gd_tss_gdt;
ltr(gsel_tss);
/*
* Set to a known state:
* Set by mpboot.s: CR0_PG, CR0_PE
* Set by cpu_setregs: CR0_NE, CR0_MP, CR0_TS, CR0_WP, CR0_AM
*/
cr0 = rcr0();
cr0 &= ~(CR0_CD | CR0_NW | CR0_EM);
load_cr0(cr0);
pmap_set_opt(); /* PSE/4MB pages, etc */
/* set up CPU registers and state */
cpu_setregs();
/* set up FPU state on the AP */
npxinit(__INITIAL_NPXCW__);
/* set up SSE registers */
enable_sse();
}
/*
* AP cpu's call this to sync up protected mode.
*
* WARNING! %gs is not set up on entry. This routine sets up %gs.
*/
void
init_secondary(void)
{
int gsel_tss;
int x, myid = bootAP;
u_int64_t msr, cr0;
struct mdglobaldata *md;
struct privatespace *ps;
ps = &CPU_prvspace[myid];
gdt_segs[GPROC0_SEL].ssd_base =
(long) &ps->mdglobaldata.gd_common_tss;
ps->mdglobaldata.mi.gd_prvspace = ps;
/* We fill the 32-bit segment descriptors */
for (x = 0; x < NGDT; x++) {
if (x != GPROC0_SEL && x != (GPROC0_SEL + 1))
ssdtosd(&gdt_segs[x], &gdt[myid * NGDT + x]);
}
/* And now a 64-bit one */
ssdtosyssd(&gdt_segs[GPROC0_SEL],
(struct system_segment_descriptor *)&gdt[myid * NGDT + GPROC0_SEL]);
r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1;
r_gdt.rd_base = (long) &gdt[myid * NGDT];
lgdt(&r_gdt); /* does magic intra-segment return */
/* lgdt() destroys the GSBASE value, so we load GSBASE after lgdt() */
wrmsr(MSR_FSBASE, 0); /* User value */
wrmsr(MSR_GSBASE, (u_int64_t)ps);
wrmsr(MSR_KGSBASE, 0); /* XXX User value while we're in the kernel */
lidt(&r_idt_arr[mdcpu->mi.gd_cpuid]);
#if 0
lldt(_default_ldt);
mdcpu->gd_currentldt = _default_ldt;
#endif
gsel_tss = GSEL(GPROC0_SEL, SEL_KPL);
gdt[myid * NGDT + GPROC0_SEL].sd_type = SDT_SYSTSS;
md = mdcpu; /* loaded through %gs:0 (mdglobaldata.mi.gd_prvspace)*/
md->gd_common_tss.tss_rsp0 = 0; /* not used until after switch */
#if 0 /* JG XXX */
md->gd_common_tss.tss_ioopt = (sizeof md->gd_common_tss) << 16;
#endif
md->gd_tss_gdt = &gdt[myid * NGDT + GPROC0_SEL];
md->gd_common_tssd = *md->gd_tss_gdt;
/* double fault stack */
md->gd_common_tss.tss_ist1 =
(long)&md->mi.gd_prvspace->idlestack[
sizeof(md->mi.gd_prvspace->idlestack)];
ltr(gsel_tss);
/*
* Set to a known state:
* Set by mpboot.s: CR0_PG, CR0_PE
* Set by cpu_setregs: CR0_NE, CR0_MP, CR0_TS, CR0_WP, CR0_AM
*/
cr0 = rcr0();
cr0 &= ~(CR0_CD | CR0_NW | CR0_EM);
load_cr0(cr0);
/* Set up the fast syscall stuff */
msr = rdmsr(MSR_EFER) | EFER_SCE;
wrmsr(MSR_EFER, msr);
wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall));
wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32));
msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) |
((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48);
wrmsr(MSR_STAR, msr);
wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D|PSL_IOPL);
pmap_set_opt(); /* PSE/4MB pages, etc */
pmap_init_pat(); /* Page Attribute Table */
/* set up CPU registers and state */
cpu_setregs();
/* set up SSE/NX registers */
initializecpu(myid);
/* set up FPU state on the AP */
npxinit(__INITIAL_FPUCW__);
/* disable the APIC, just to be SURE */
lapic->svr &= ~APIC_SVR_ENABLE;
}