Esempio n. 1
0
LOCAL int advance_front2d(
	double    dt,
	double    *dt_frac,
	Front    *front,
	Front    **newfront,
	POINTER  wave)
{
	CURVE      *oldc,*tempc,*newc;
	CURVE	   **c;
	INTERFACE  *tempintfc;
	NODE 	   *oldn,*tempn,*newn;
	NODE_FLAG  flag;
	RPROBLEM   *rp;
	RPROBLEM   *rp1;
	boolean	   scatter_normally_propagated_front = YES;
	boolean	   scatter_tangentially_propagated_front = YES;
	boolean	   stat;
	boolean       do_redist;
	int        status;
	long       intfc_modified;
	long       redo_advance_front;
	static const char *fname = "advance_front2d()";
	int	   debug_flag = NO;

	debug_print("front","Entered %s(step %d time %g dt %g)\n",fname,
	        	        front->step,front->time,dt);
	debug_front("old_front","into advance front",front);

	*newfront = copy_front(front);
	Interface_redistributed(*newfront) = NO;
	do_redist = (front->num_mts == 0) ? YES : NO;

begin_advance_front2d:
	redo_advance_front = 0;
	tempintfc = NULL;
	rp = NULL;
	set_to_next_node_only(flag);

	set_node_doubly_linked_list(front->interf);

	        /* Initialize Newfront */

	start_clock("init_new_front");
	capture_waves(front);
	print_storage("before init_new_front","ADV_storage");
	        /* TODO: Remove this option!!!!! */
	if (front->init_topology_of_new_interface)
	    status = (*front->init_topology_of_new_interface)(front,*newfront);
	else 
	{
	    set_size_of_intfc_state(size_of_state(front->interf));
	    set_copy_intfc_states(NO);
	    set_add_to_correspond_list(YES);
	    (*newfront)->interf = pp_copy_interface(front->interf);
	    reset_hs_flags_on_intfc((*newfront)->interf);
	    status = ((*newfront)->interf != NULL) ? GOOD_STEP : ERROR_IN_STEP;
	    set_copy_intfc_states(YES);
	}
	if (front->pp_grid)
	    status = syncronize_time_step_status(status,front->pp_grid);
	if (status != GOOD_STEP) 
	{
	    (void) printf("WARNING in advance_front2d(), "
	                  "unable to copy interface\n");
	    status = ERROR_IN_STEP;
	    stop_clock("init_new_front");
	    return return_advance_front(front,newfront,status,fname);
	}
	print_storage("after init_new_front","ADV_storage");
	stop_clock("init_new_front");

	        /* Set Default Propagation Limits */

	set_propagation_limits(front,*newfront);

	        /* Propagate the Curves */

	if (front->intfc_propagate != NULL)
	{
	    start_clock("intfc_propagate");
	    intfc_propagate(front,wave,front->interf,(*newfront)->interf,dt);
	    debug_front("cp_front","after intfc prop",*newfront);
	    stop_clock("curve_propagate");
	}
	else if (front->curve_propagate != NULL) 
	{
	    start_clock("curve_propagate");
	    if (debugging("front"))
	    	(void) printf("Loop over Curves\n");
	    for (c = front->interf->curves; c && *c; ++c)
	    {
	        oldc = *c;
	        if (((newc = correspond_curve(oldc)) != NULL) &&
	    	     (correspond_curve(newc) != NULL))
	        {
	    	    if (debugging("propagate"))
	                (void) printf("\t\tpropagating curve %llu\n",
		                      (long long unsigned int)curve_number(oldc));
		    curve_propagate(front,wave,oldc,newc,dt);
		    /*f_curve_propagate2d */
		}
	    }
	    debug_front("cp_front","after curve prop",*newfront);
	    stop_clock("curve_propagate");
	}

		/* Propagate the Nodes */

	if (debugging("front"))
	{
	    print_correspond_hyper_surf_list(front->interf);
	    print_correspond_hyper_surf_list((*newfront)->interf);
	}
	if (front->node_propagate != NULL) 
	{
	    start_clock("node_propagate");
	    set_corresponds_for_node_prop(front->interf,(*newfront)->interf);
	    oldn = first_node(front->interf);
	    while (oldn != NULL) 
	    {
	        newn = correspond_node(oldn);
	        if (debugging("crx_status"))
	            print_linked_node_list((*newfront)->interf);
	        status = (newn != NULL) ?
	            (*front->node_propagate)(front,wave,oldn,newn,&rp,
	        			     dt,dt_frac,flag,NULL) : GOOD_NODE;

	        if (debugging("crx_status"))
	        if (is_bad_status(status) &&
	          (point_in_buffer(Coords(oldn->posn),front->rect_grid) == YES))
	        {
	            print_node_status("WARNING in advance_front2d(), "
	                              "node_propagation returns ",status,"\n");
	            (void) printf("Problem occurs in buffer zone - ignoring\n");
	            if (set_node_states_and_continue(oldn,newn,front))
	                status = GOOD_NODE;
	        }

	        switch (status) 
	        {
	        case GOOD_NODE:
	            oldn = adv_node_loop_after_good_prop(oldn,newn,&rp);
	            break;
	        case PSEUDOCROSS_NODE_NODE:
	            debug_print("PSEUDOCROSS","PSEUDOCROSS case\n");
	            oldn = reorder_node_loop(oldn,newn);
	            break;
	        case CROSS_NODE_NODE:
	        case BIFURCATION_NODE:
	            debug_print("CROSS","CROSS case\n");
	            oldn = next_node(oldn);
	            break;
	        case CROSS_PAST_CURVE_NODE:
	            print_node_status("WARNING in advance_front2d(), "
	                              "node_propagate failed with status ",
				      status,"\n");
	            print_node(oldn);
	            if (debugging("CROSS_PAST"))
	            {
	                (void) printf("Cross past curve case\n"
	                              "dt_frac = %g\n",*dt_frac);
	                (void) printf("Reducing time step\n");
	            }
		    status = node_modify_time_step(oldn,front,dt_frac,
					           MODIFY_TIME_STEP);
	            free_rp_list(&rp);
	            goto sync_prop_stat1;
	        case MODIFY_TIME_STEP_NODE:
	            (void) printf("WARNING in advance_front2d(), "
	                          "node_propagate returns "
	                          "MODIFY_TIME_STEP_NODE\n");
	            free_rp_list(&rp);
		    status = node_modify_time_step(oldn,front,NULL,
						   MODIFY_TIME_STEP);
	            goto sync_prop_stat1;
	        case REPEAT_TIME_STEP_NODE:
	            (void) printf("WARNING in advance_front2d(), "
	                          "node_propagate returns "
	                          "REPEAT_TIME_STEP_NODE\n");
	            free_rp_list(&rp);
		    status = node_modify_time_step(oldn,front,NULL,
					           REPEAT_TIME_STEP);
	            goto sync_prop_stat1;
	        case NO_CROSS_NODE:
	            print_node_status("WARNING in advance_front2d(), "
	                              "node_propagate failed with status ",
	                              status,"\n");
	            print_node(oldn);
	            if (debugging("NO_CROSS"))
	            {
	                (void) printf("No cross case\n");
	                (void) printf("dt_frac = %g\n",*dt_frac);
	                (void) printf("Reducing time step\n");
	            }
	            free_rp_list(&rp);
		    status = node_modify_time_step(oldn,front,dt_frac,
					           MODIFY_TIME_STEP);
	            goto sync_prop_stat1;
	        case ERROR_NODE:
	        default:
	            print_node_status("WARNING in advance_front2d(), "
	                              "node_propagate failed with status ",
	                              status,"\n");
	            print_node(oldn);
	            if (debugging("ERROR_NODE"))
	            {
	                (void) printf("Old interface:\n");
	                print_interface(front->interf);
	                print_correspond_hyper_surf_list(front->interf);
	                (void) printf("New interface:\n");
	                print_interface((*newfront)->interf);
	                print_correspond_hyper_surf_list((*newfront)->interf);
	            }
		    status = node_modify_time_step(oldn,front,dt_frac,
					           ERROR_IN_STEP);
	            free_rp_list(&rp);
	            goto sync_prop_stat1;
	        }
	    } /* end of while (oldn != NULL) */
	    set_correspond_hyper_surf_bdrys_to_NULL(front->interf);
	    set_correspond_hyper_surf_bdrys_to_NULL((*newfront)->interf);
	    if (rp && (front->twodrproblem != NULL)) 
	    {
	        for (rp1 = rp; rp1; rp1 = rp1->prev) 
	        {
	            debug_front("2drp_front",
	                "new between node loop and rp loop",*newfront);
	                    
	            status = (*front->twodrproblem)(front,*newfront,wave,&rp1);

	            /* At this point, rp is nothing more than a valid element
	             * of the list which provides a starting point
	             * for deleting the list.  If we delete an element of
	             * the list in front->twodrproblem (presumably due to
	             * merging two RPROBLEM's), then rp may point to freed
	             * storage and will need to be updated.  rp1 should still
	             * be a valid element of the list.
	             */
	            rp = rp1;

		    if (status != GOOD_STEP)
		    {
	                print_time_step_status("WARNING in advance_front2d(), "
					       "rp failed with status = ",
					       status,"\n");
	                switch (status) 
	                {
	                case GOOD_STEP:
			    break;

		        case REPEAT_TIME_STEP:
	                    break;

	                case MODIFY_TIME_STEP:
		            status = rp_modify_time_step(rp1,front,status);
			    if (status == MODIFY_TIME_STEP)
			    {
	                        *dt_frac = rp1->dt_frac;
	                        if (debugging("2drp"))
	                        {
	                            print_rproblem(rp1);
	                            (void) printf("dt_frac %g\n",*dt_frac);
	                            (void) printf("Reducing time step\n");
	                        }
			        *dt_frac = limit_dt_frac(*dt_frac,front);
			    }
	                    break;

	                case ERROR_IN_STEP:
	                default:
	                    print_rproblem(rp1);
	                    /* Try reducing the time step */
		            status = rp_modify_time_step(rp1,front,status);
	                    if (status == MODIFY_TIME_STEP)
	                        *dt_frac *=
				    TIME_STEP_REDUCTION_FACTOR(front->interf);
	                    break;
	                }
		    }
	            if (status != GOOD_STEP)
			break;
	        }
	        free_rp_list(&rp);
	        debug_front("2drp_front","after 2drp loop",*newfront);
	    }
	    else if (rp) 
	    {
	        for (rp1 = rp; rp1; rp1 = rp1->prev) 
	            print_rproblem(rp1);
	        free_rp_list(&rp);
	        (void) printf("WARNING in advance_front2d(), "
	                      "CROSS code needed\n");
	        status = ERROR_IN_STEP;
	    }

sync_prop_stat1:
	    stop_clock("node_propagate");
	    if (front->pp_grid)
	    	status = syncronize_time_step_status(status,front->pp_grid);
	    if (status != GOOD_STEP)
	        return return_advance_front(front,newfront,status,fname);
	}
	if (*front->max_scaled_propagation > 0.5)
	{
	    (void) printf("WARNING in advance_front2d(), "
	                  "front->max_scaled_propagation = %f\n",
			  *(front->max_scaled_propagation));
	    *dt_frac = 0.4/(*front->max_scaled_propagation);
	    status = MODIFY_TIME_STEP;
	    goto sync_prop_stat2;
	}

	stat = consistent_propagated_loop_orientations(dt,dt_frac,front,wave);
	if (stat == NO)
	{
	    (void) printf("WARNING in advance_front2d(), "
		          "Inconsistent orientation of propagated loop "
	                  "detected after point and node propagations");
	    if (pp_numnodes() > 1)
		(void) printf(" on processor %d\n",pp_mynode());
	    else
		(void) printf("\n");
	}
	if (pp_min_status(stat) == NO)
	{
	    if (stat == YES)
	    {
	        (void) printf("WARNING in advance_front2d(), "
		              "Inconsistent orientation of propagated loop "
	                      "detected on a remote processor "
			      "after point and node propagations ");
	    }
	    status = MODIFY_TIME_STEP;
	    goto sync_prop_stat2;
	}

	/* Make Temp Interface for Tangential Propagation */

	set_node_doubly_linked_list((*newfront)->interf);
	if (front->snd_node_propagate) 
	{
	    start_clock("snd_copy_interface");
	    print_storage("before snd_copy_interface","ADV_storage");
	    tempintfc = (*newfront)->interf;
	    set_size_of_intfc_state(size_of_state(tempintfc));
	    set_add_to_correspond_list(YES);
	    if (((*newfront)->interf = pp_copy_interface(tempintfc)) == NULL)
	    {
	    	(void) printf("WARNING in advance_front2d(), "
		              "unable to copy interface\n");
		status = ERROR_IN_STEP;
		goto sync_prop_stat2;
	    }
	    copy_hypersurface_flags((*newfront)->interf);
	    print_storage("after snd_copy_interface","ADV_storage");
	    stop_clock("snd_copy_interface");
	}
	interpolate_intfc_states((*newfront)->interf) = YES;

	/* Second Propagation for the States Around the Nodes */

	if (front->snd_node_propagate) 
	{
	    start_clock("snd_node_propagate");
	    if (debugging("front"))
	    	(void) printf("Second Loop over Nodes\n");

	    tempn = first_node(tempintfc);
	    newn = first_node((*newfront)->interf);
	    while (newn != NULL)
	    {
	    	(*front->snd_node_propagate)(front,*newfront,wave,
	    				     tempintfc,tempn,newn,dt);
	    	tempn = next_node(tempn);
	    	newn = next_node(newn);
	    }

	    debug_front("snd_front","after snd_node prop",*newfront);
	    stop_clock("snd_node_propagate");
	}

	if (tempintfc)
	    (void) delete_interface(tempintfc);
	print_storage("after delete tempintfc","ADV_storage");

		/* Redistribute the New Front */

	switch (redistribute(*newfront,do_redist,NO)) 
	{
	case	GOOD_REDISTRIBUTION:
	    status = GOOD_STEP;
	    break;
	
	case	UNABLE_TO_UNTANGLE:
	    (void) printf("WARNING in advance_front2d(), "
	                  "redistribution of front failed\n"
	                  "Restarting advance_front2d()\n");
	    *dt_frac = Min_time_step_modification_factor(front);
	    status = MODIFY_TIME_STEP;
	    break;

	case	MODIFY_TIME_STEP_REDISTRIBUTE:
	    (void) printf("WARNING in advance_front2d(), "
	                  "redistribute returns\n"
	                  "\t\tMODIFY_TIME_STEP_REDISTRIBUTE, dt_frac = %g\n",
			  *dt_frac);
	    *dt_frac = Min_time_step_modification_factor(front);
	    status = MODIFY_TIME_STEP;
	    break;
		
	case	BAD_REDISTRIBUTION:
	default:
	    (void) printf("WARNING in advance_front2d(), "
	                  "redistribution of front failed\n");
	    debug_front("ERROR_front","after error",*newfront);
	    *dt_frac = Min_time_step_modification_factor(front);
	    status = MODIFY_TIME_STEP;
	    break;
	}
	if (front->pp_grid)
	    status = syncronize_time_step_status(status,front->pp_grid);
	if (status != GOOD_STEP)
	    return return_advance_front(front,newfront,status,fname);

	Redistribution_count(front) = Redistribution_count(*newfront);
	(*newfront)->step = front->step + 1;
	(*newfront)->time = front->time + dt;
	debug_front("redist_front","after redistribution",*newfront);

	/* Communicate topologically propagated front */
	if (scatter_normally_propagated_front == YES)
	{
	    start_clock("scatter_front");
	    if (!scatter_front(*newfront))
	    {
	    	(void) printf("WARNING in advance_front2d(), "
	    	              "scatter_front() failed for "
	    	              "normally propagated front\n");
	    	scatter_normally_propagated_front = NO;
	    	scatter_tangentially_propagated_front = NO;
	    	(void) delete_interface((*newfront)->interf);
	    	(*newfront)->interf = NULL;
	    	goto begin_advance_front2d;
	    }
	    stop_clock("scatter_front");
	}

	debug_front("node_front","after node loop",*newfront);
	if (debugging("front"))
	{
	    print_correspond_hyper_surf_list(front->interf);
	    print_correspond_hyper_surf_list((*newfront)->interf);
	}

	if (front->mass_consv_diagn_driver)
	    (*front->mass_consv_diagn_driver)(front,wave,dt);

	if (debugging("bond_lengths"))
	    check_bond_lengths((*newfront)->interf);

	/* Check for the geometric orientation of loops */

	/* ONLY check loops that will not be deleted !!!! */
	delete_small_loops(*newfront);

		/* Delete non-boundary curves that lie  */
		/* fully on or exterior to the boundary */

	delete_exterior_curves(*newfront,front->interf);
	intfc_delete_fold_back_bonds(*newfront);
	debug_front("dec_front","after delete_exterior_curves:",*newfront);

	interpolate_intfc_states((*newfront)->interf) = YES;

	/* Make Temp Interface for Tangential Propagation */

	if (front->tan_curve_propagate) 
	{
	    start_clock("snd_copy_interface");
	    print_storage("before snd_copy_interface","ADV_storage");
	    tempintfc = (*newfront)->interf;
	    set_size_of_intfc_state(size_of_state(tempintfc));
	    set_add_to_correspond_list(YES);
	    if (((*newfront)->interf = pp_copy_interface(tempintfc)) == NULL)
	    {
	    	(void) printf("WARNING in advance_front2d(), "
		              "unable to copy interface\n");
		status = ERROR_IN_STEP;
		goto sync_prop_stat2;
	    }
	    copy_hypersurface_flags((*newfront)->interf);
	    interpolate_intfc_states((*newfront)->interf) = YES;
	    print_storage("after snd_copy_interface","ADV_storage");
	    stop_clock("snd_copy_interface");
	}

	/* Tangential Sweep for States on the Curves */

	if (front->tan_curve_propagate) 
	{
	    start_clock("tan_curve_propagate");
	    if (debugging("front"))
	    	(void) printf("Second Loop over Curves\n");
	    for (c = tempintfc->curves; c && *c; ++c)
	    {
	    	tempc = *c;
	    	newc = correspond_curve(tempc);
	    	(*front->tan_curve_propagate)(front,*newfront,
	    				      tempintfc,tempc,newc,dt);
	    }
	    debug_front("tcp_front","after tan_curve_propagate:",*newfront);
	    stop_clock("tan_curve_propagate");
	}
	if (tempintfc)
	    (void) delete_interface(tempintfc);
	print_storage("after delete tempintfc","ADV_storage");


		/* Provide robustness for untangle algorithms */

		/*   delete remnants of scalar physical   */
		/*  curves sticking to NEUMANN boundaries */
		/* Add to delete_exterior_curves()? */

	if (pp_min_status(delete_phys_remn_on_bdry(*newfront)) == NO)
	{
	    (void) printf("WARNING in advance_front2d(), "
	                  "delete_phys_remn_on_bdry() detected error\n");
	    debug_front("ERROR_front","after error",*newfront);
	    *dt_frac = Min_time_step_modification_factor(front);
	    status = MODIFY_TIME_STEP;
	    goto sync_prop_stat2;
	}
	debug_front("dspr_front",
		    "after 1st delete_phys_remn_on_bdry():",*newfront);

sync_prop_stat2:
	if (front->pp_grid)
	    status = syncronize_time_step_status(status,front->pp_grid);
	if (status != GOOD_STEP)
	    return return_advance_front(front,newfront,status,fname);

	/* Communicate tangentially propagated front */
	if (scatter_tangentially_propagated_front == YES)
	{
	    start_clock("scatter_front");
	    if (!scatter_front(*newfront))
	    {
	    	(void) printf("WARNING in advance_front2d(), "
	    	              "scatter_front() failed for "
	    	              "tangentially propagated front\n");
	    	scatter_normally_propagated_front = NO;
	    	scatter_tangentially_propagated_front = NO;
	    	(void) delete_interface((*newfront)->interf);
	    	(*newfront)->interf = NULL;
	    	goto begin_advance_front2d;
	    }
	    stop_clock("scatter_front");
	}

	if (status != GOOD_STEP)
	    return return_advance_front(front,newfront,status,fname);


		/* 	Post-process newfront->interf	   */
		/* Provide robustness after redistribution */
		/*   for node propagate on next time step  */

		/* Delete non-boundary curves that lie  */
		/* fully on or exterior to the boundary */

	delete_exterior_curves(*newfront,front->interf);
	debug_front("dec_front","after delete_exterior_curves:",*newfront);

		/*  delete remnants of scalar physical    */
		/* curves sticking to NEUMANN boundaries  */
		/* Add to delete_exterior_curves()? */

	if (pp_min_status(delete_phys_remn_on_bdry(*newfront)) == NO)
	{
	    (void) printf("WARNING in advance_front2d(), "
	                  "delete_phys_remn_on_bdry() detected error\n");
	    debug_front("ERROR_front","after error",*newfront);
	    *dt_frac = Min_time_step_modification_factor(front);
	    status = MODIFY_TIME_STEP;
	    return return_advance_front(front,newfront,status,fname);
	}
	debug_front("dspr_front",
		    "after 2nd delete_phys_remn_on_bdry():",*newfront);


	/* These guys keep sneaking through !! */
	/* This should be the most effective place for this call */
	/* Brent - I believe it is better to have the function at
	*  the end of advance_front2d() applied to the newfront
	*  instead of at the beginning applied to front.
	*  In general our policy should be never to modify the
	*  old interface data.
	*/
	delete_small_loops(*newfront);
	debug_front("dsloop_front","after delete_small_loops():",*newfront);

	test_for_mono_comp_curves((*newfront)->interf);

	/* Check if post processing has changed topology */

	intfc_modified = (*newfront)->interf->modified;
	pp_global_lmax(&intfc_modified,1L);
	if (intfc_modified)
	{
	    if (!scatter_front(*newfront))
	    {
	    	(void) printf("WARNING in advance_front2d(), "
	    	              "final scatter_front() failed\n");
	    	*dt_frac = Max_time_step_modification_factor(front);
	        return return_advance_front(front,newfront,
		                            MODIFY_TIME_STEP,fname);
	    }
	    stat = make_bond_comp_lists((*newfront)->interf);
	    if (pp_min_status(stat) == FUNCTION_FAILED)
	    {
	    	screen("ERROR in advance_front2d(), "
	    	       "make_bond_comp_lists() failed\n");
	    	clean_up(ERROR);
	    }
	}

	return return_advance_front(front,newfront,GOOD_STEP,fname);
}		/*end advance_front2d*/
Esempio n. 2
0
EXPORT int normal_advance_front2d(
	float    dt,
	float    *dt_frac,
	Front    *front,
	Front    **newfront,
	POINTER  wave)
{
	CURVE      *oldc,*newc;
	CURVE	   **c;
	NODE 	   *oldn,*newn;
	RPROBLEM   *rp,*rp1;
	int        status, node_stat;
        NODE_FLAG  flag;  
	const char *fname = "normal_advance_front2d()";

	debug_print("front","Entered %s(step %d time %g dt %g)\n",fname,
	        	        front->step,front->time,dt);
	debug_front("old_front","into advance front",front);

	*newfront = copy_front(front);
	Interface_redistributed(*newfront) = NO;

        if(front->interf->nodes == NULL)
        {
            bool       sav_copy;
            INTERFACE  *sav_intfc;  
            sav_intfc = current_interface();
            sav_copy = copy_intfc_states();
            set_size_of_intfc_state(size_of_state(front->interf));
            set_copy_intfc_states(YES);
            (*newfront)->interf = copy_interface(front->interf);
            set_current_interface(sav_intfc);
            set_copy_intfc_states(sav_copy);
            return return_advance_front(front,newfront,GOOD_STEP,fname);  
        }

	rp = NULL;

        set_to_next_node_only(flag);  

	set_node_doubly_linked_list(front->interf);

	        /* Initialize Newfront */

	start_clock("init_new_front");
	capture_waves(front);
	print_storage("before init_new_front","ADV_storage");
	        /* TODO: Remove this option!!!!! */
	if (front->init_topology_of_new_interface)
	    status = (*front->init_topology_of_new_interface)(front,*newfront);
	else 
	{
	    set_size_of_intfc_state(size_of_state(front->interf));
	    set_copy_intfc_states(NO);
	    set_add_to_correspond_list(YES);
            /* 
            If USE_OVERTURE, can not syncronize_time_step at here 
	    (*newfront)->interf = pp_copy_interface(front->interf);
            */ 
	    (*newfront)->interf = copy_interface(front->interf);
	    reset_hs_flags_on_intfc((*newfront)->interf);
	    status = ((*newfront)->interf != NULL) ? GOOD_STEP : ERROR_IN_STEP;
	    set_copy_intfc_states(YES);
	}
        if (status != GOOD_STEP)
        {
            (void) printf("ERROR in normal_advance_front2d(), "
                          "unable to copy interface\n");
            print_storage("after init_new_front","ADV_storage");
            clean_up(ERROR);
        }
	print_storage("after init_new_front","ADV_storage");
	stop_clock("init_new_front");

	        /* Set Default Propagation Limits */

	set_propagation_limits(front,*newfront);

	        /* Propagate the Curves */

	if (front->curve_propagate != NULL) 
	{
	    start_clock("curve_propagate");
	    if (debugging("front"))
	    	(void) printf("Loop over Curves\n");
	    for (c = front->interf->curves; c && *c; c++)
	    {
	        oldc = *c;
	        if (((newc = correspond_curve(oldc)) != NULL) &&
	    	     (correspond_curve(newc) != NULL))
	        {
	    	    if (debugging("propagate"))
	                (void) printf("\t\tpropagating curve %lu\n",
		                      curve_number(oldc));
		    curve_propagate(front,wave,oldc,newc,dt);
		}
	    }
	    debug_front("cp_front","after curve prop",*newfront);
	    stop_clock("curve_propagate");
	}

		/* Propagate the Nodes */

	if (debugging("front"))
	{
	    print_correspond_hyper_surf_list(front->interf);
	    print_correspond_hyper_surf_list((*newfront)->interf);
	}
	if (front->node_propagate != NULL) 
	{
	    start_clock("node_propagate");
	    set_corresponds_for_node_prop(front->interf,(*newfront)->interf);
	    oldn = first_node(front->interf);
	    while (oldn != NULL) 
	    {
	        newn = correspond_node(oldn);
	        if (debugging("crx_status"))
	            print_linked_node_list((*newfront)->interf);
                if(DEBUG)
                {
                    /* 
                    printf("IN normal_advance_front2d\n");  
                    printf("node propagate\n");
                    print_node(oldn);
                    print_node(newn); 
                    printf("oldnode is virtual fixed = %s\n",
                       is_virtual_fixed_node(oldn) == YES ?
                       "YES" : "NO"); 
                    printf("newnode is virtual fixed = %s\n",
                       is_virtual_fixed_node(newn) == YES ?
                       "YES" : "NO"); 
                    printf("End of print new and old nodes\n");  
                    */  
                } 
	        status = (newn != NULL) ?
	            (*front->node_propagate)(front,wave,oldn,newn,&rp,
	        			     dt,dt_frac,flag,NULL) : GOOD_NODE;
	        if (is_bad_status(status) &&
	          (point_in_buffer(Coords(oldn->posn),front->rect_grid) == YES))
	        {
	            (void) printf("WARNING in normal_advance_front2d(), "
	                          "node_propagation returns ");
                    print_node_status("WARNING in normal_advance_front2d(), "
                                      "node_propagation returns ",status,"\n"); 
                    /* 
	            print_node_status(status);
                    */  
	            (void) printf("Problem occurs in buffer zone - ignoring\n");
	            if (set_node_states_and_continue(oldn,newn,front))
	                status = GOOD_NODE;
	        }

	        switch (status) 
	        {
	        case GOOD_NODE:
	            oldn = adv_node_loop_after_good_prop(oldn,newn,&rp);
	            break;
	        case PSEUDOCROSS_NODE_NODE:
	            debug_print("PSEUDOCROSS","PSEUDOCROSS case\n");
	            oldn = reorder_node_loop(oldn,newn);
	            break;
	        case CROSS_NODE_NODE:
	        case BIFURCATION_NODE:
	            debug_print("CROSS","CROSS case\n");
	            oldn = next_node(oldn);
	            break;
	        case CROSS_PAST_CURVE_NODE:
	            (void) printf("WARNING in normal_advance_front2d(), ");
	            (void) printf("node_propagate failed, ");
                    print_node_status("WARNING in normal_advance_front2d(), "
                                      "node_propagate failed with status ",
                                      status,"\n");
	            print_node(oldn);
	            if (debugging("CROSS_PAST"))
	            {
	                (void) printf("Cross past curve case\n"
	                              "dt_frac = %g\n",*dt_frac);
	                (void) printf("Reducing time step\n");
	            }
	            *dt_frac *= TIME_STEP_REDUCTION_FACTOR(front->interf);
	            free_rp_list(&rp);
	            status = MODIFY_TIME_STEP;
	            goto sync_prop_stat1;
	        case MODIFY_TIME_STEP_NODE:
	            (void) printf("WARNING in normal_advance_front2d(), "
	                          "node_propagate returns "
	                          "MODIFY_TIME_STEP_NODE\n");
	            free_rp_list(&rp);
	            status = MODIFY_TIME_STEP;
	            goto sync_prop_stat1;
	        case REPEAT_TIME_STEP_NODE:
	            (void) printf("WARNING in normal_advance_front2d(), "
	                          "node_propagate returns "
	                          "REPEAT_TIME_STEP_NODE\n");
	            free_rp_list(&rp);
	            status = REPEAT_TIME_STEP;
	            goto sync_prop_stat1;
	        case NO_CROSS_NODE:
	            (void) printf("WARNING in normal_advance_front2d(), ");
	            (void) printf("node_propagate failed, ");
                    print_node_status("WARNING in normal_advance_front2d(), "
                                      "node_propagate failed with status ",
                                      status,"\n"); 
	            print_node(oldn);
	            if (debugging("NO_CROSS"))
	            {
	                (void) printf("No cross case\n");
	                (void) printf("dt_frac = %g\n",*dt_frac);
	                (void) printf("Reducing time step\n");
	            }
	            *dt_frac *= TIME_STEP_REDUCTION_FACTOR(front->interf);
	            free_rp_list(&rp);
	            status = MODIFY_TIME_STEP;
	            goto sync_prop_stat1;
	        case ERROR_NODE:
	        default:
	            (void) printf("WARNING in normal_advance_front2d(), ");
	            (void) printf("node_propagate failed, ");
                    print_node_status("WARNING in normal_advance_front2d(), "
                                      "node_propagate failed with status ",
                                      status,"\n");
	            print_node(oldn);
	            if (debugging("ERROR_NODE"))
	            {
	                (void) printf("Old interface:\n");
	                print_interface(front->interf);
	                print_correspond_hyper_surf_list(front->interf);
	                (void) printf("New interface:\n");
	                print_interface((*newfront)->interf);
	                print_correspond_hyper_surf_list((*newfront)->interf);
	            }
	            *dt_frac = Min_time_step_modification_factor(front);
	            free_rp_list(&rp);
	            status = MODIFY_TIME_STEP;
	            goto sync_prop_stat1;
	        }
	    } /* end of while (oldn != NULL) */

	    set_correspond_hyper_surf_bdrys_to_NULL(front->interf);
	    set_correspond_hyper_surf_bdrys_to_NULL((*newfront)->interf);
	    if (rp && (front->twodrproblem != NULL)) 
	    {
	        for (rp1 = rp; rp1; rp1 = rp1->prev) 
	        {
	            debug_front("2drp_front",
	                "new between node loop and rp loop",*newfront);
	                    
	            status = (*front->twodrproblem)(front,*newfront,wave,&rp1);

	            /* At this point, rp is nothing more than a valid element
	             * of the list which provides a starting point
	             * for deleting the list.  If we delete an element of
	             * the list in front->twodrproblem (presumably due to
	             * merging two RPROBLEM's), then rp may point to freed
	             * storage and will need to be updated.  rp1 should still
	             * be a valid element of the list.
	             */
	            rp = rp1;

                    if (status != GOOD_STEP)
                    {
                        print_time_step_status("WARNING in advance_front2d(), "
                                               "rp failed with status = ",
                                               status,"\n");
                        switch (status)
                        {
                        case GOOD_STEP:
                            break;

                        case REPEAT_TIME_STEP:
                            break;
                        case MODIFY_TIME_STEP:
                            status = rp_modify_time_step(rp1,front,status);
                            if (status == MODIFY_TIME_STEP)
                            {
                                *dt_frac = rp1->dt_frac;
                                if (debugging("2drp"))
                                {
                                    print_rproblem(rp1);
                                    (void) printf("dt_frac %g\n",*dt_frac);
                                    (void) printf("Reducing time step\n");
                                }
                                *dt_frac = limit_dt_frac(*dt_frac,front);
                            }
                            break;

                        case ERROR_IN_STEP:
                        default:
                            print_rproblem(rp1);
                            /* Try reducing the time step */
                            status = rp_modify_time_step(rp1,front,status);
                            if (status == MODIFY_TIME_STEP)
                                *dt_frac *=
                                    TIME_STEP_REDUCTION_FACTOR(front->interf);
                            break;
                        }
                    }
                    if (status != GOOD_STEP)
                        break;
	        }
	        free_rp_list(&rp);
	        debug_front("2drp_front","after 2drp loop",*newfront);
	    }
	    else if (rp) 
	    {
	        for (rp1 = rp; rp1; rp1 = rp1->prev) 
	        {
	            print_rproblem(rp1);
	        }
	        free_rp_list(&rp);
	        (void) printf("WARNING in normal_advance_front2d(), ");
	        (void) printf("CROSS code needed\n");
	        status = ERROR_IN_STEP;
	    }
	}
        /* 061003 closed, since the correspondence is reset. 
         * The second node prop. is done in tangential step now. 
        node_stat = second_node_propagate2d(dt,dt_frac,front,newfront,wave);
        if(GOOD_STEP != node_stat) 
        {
            (void) printf("WARNING in normal_advance_front2d(), "
                      "second node_propagation returns stat= %d", node_stat);
            clean_up(ERROR);  
        }  
        */
sync_prop_stat1:
	return return_advance_front(front,newfront,GOOD_STEP,fname);
}		/*end normal_advance_front2d*/