uint16_t ptp_usb_getresp (PTPParams* params, PTPContainer* resp) { uint16_t ret; unsigned long rlen; PTPUSBBulkContainer usbresp; /*GPContext *context = ((PTPData *)params->data)->context;*/ gp_log (GP_LOG_DEBUG, "ptp2/ptp_usb_getresp", "reading response"); PTP_CNT_INIT(usbresp); /* read response, it should never be longer than sizeof(usbresp) */ ret = ptp_usb_getpacket(params, &usbresp, &rlen); if (ret!=PTP_RC_OK) { ret = PTP_ERROR_IO; } else if (dtoh16(usbresp.type)!=PTP_USB_CONTAINER_RESPONSE) { ret = PTP_ERROR_RESP_EXPECTED; } else if (dtoh16(usbresp.code)!=resp->Code) { ret = dtoh16(usbresp.code); } if (ret!=PTP_RC_OK) { gp_log (GP_LOG_DEBUG, "ptp2/usb_getresp","request code 0x%04x getting resp error 0x%04x", resp->Code, ret); return ret; } /* build an appropriate PTPContainer */ resp->Code=dtoh16(usbresp.code); resp->SessionID=params->session_id; resp->Transaction_ID=dtoh32(usbresp.trans_id); if (resp->Transaction_ID != params->transaction_id - 1) { if (MTP_ZEN_BROKEN_HEADER(params)) { gp_log (GP_LOG_DEBUG, "ptp2/ptp_usb_getresp", "Read broken PTP header (transid is %08x vs %08x), compensating.", resp->Transaction_ID, params->transaction_id - 1 ); resp->Transaction_ID=params->transaction_id-1; } /* else will be handled by ptp.c as error. */ } resp->Nparam=(rlen-12)/4; resp->Param1=dtoh32(usbresp.payload.params.param1); resp->Param2=dtoh32(usbresp.payload.params.param2); resp->Param3=dtoh32(usbresp.payload.params.param3); resp->Param4=dtoh32(usbresp.payload.params.param4); resp->Param5=dtoh32(usbresp.payload.params.param5); return ret; }
uint16_t ptp_usb_getresp (PTPParams* params, PTPContainer* resp) { uint16_t ret; uint32_t rlen; PTPUSBBulkContainer usbresp; /*GPContext *context = ((PTPData *)params->data)->context;*/ GP_LOG_D ("Reading PTP_OC 0x%0x (%s) response...", resp->Code, ptp_get_opcode_name(params, resp->Code)); PTP_CNT_INIT(usbresp); /* read response, it should never be longer than sizeof(usbresp) */ ret = ptp_usb_getpacket(params, &usbresp, &rlen); if (ret!=PTP_RC_OK) { ret = PTP_ERROR_IO; } else if (dtoh16(usbresp.type)!=PTP_USB_CONTAINER_RESPONSE) { ret = PTP_ERROR_RESP_EXPECTED; } else if (dtoh16(usbresp.code)!=resp->Code) { ret = dtoh16(usbresp.code); } if (ret!=PTP_RC_OK) { GP_LOG_E ("PTP_OC 0x%04x receiving resp failed: %s (0x%04x)", resp->Code, ptp_strerror(ret, params->deviceinfo.VendorExtensionID), ret); return ret; } /* build an appropriate PTPContainer */ resp->Code=dtoh16(usbresp.code); resp->SessionID=params->session_id; resp->Transaction_ID=dtoh32(usbresp.trans_id); if (resp->Transaction_ID != params->transaction_id - 1) { if (MTP_ZEN_BROKEN_HEADER(params)) { GP_LOG_D ("Read broken PTP header (transid is %08x vs %08x), compensating.", resp->Transaction_ID, params->transaction_id - 1 ); resp->Transaction_ID=params->transaction_id-1; } /* else will be handled by ptp.c as error. */ } resp->Nparam=(rlen-12)/4; resp->Param1=dtoh32(usbresp.payload.params.param1); resp->Param2=dtoh32(usbresp.payload.params.param2); resp->Param3=dtoh32(usbresp.payload.params.param3); resp->Param4=dtoh32(usbresp.payload.params.param4); resp->Param5=dtoh32(usbresp.payload.params.param5); return ret; }
uint16_t ptp_usb_getdata (PTPParams* params, PTPContainer* ptp, PTPDataHandler *handler) { uint16_t ret; PTPUSBBulkContainer usbdata; unsigned char *data; unsigned long bytes_to_read, written, curread, oldsize; Camera *camera = ((PTPData *)params->data)->camera; int usecontext, progressid = 0, tries = 0, res; GPContext *context = ((PTPData *)params->data)->context; gp_log (GP_LOG_DEBUG, "ptp2/ptp_usb_getdata", "reading data"); PTP_CNT_INIT(usbdata); do { unsigned long len, rlen; ret = ptp_usb_getpacket(params, &usbdata, &rlen); if (ret!=PTP_RC_OK) { ret = PTP_ERROR_IO; break; } if (dtoh16(usbdata.type)!=PTP_USB_CONTAINER_DATA) { /* We might have got a response instead. On error for instance. */ if (dtoh16(usbdata.type) == PTP_USB_CONTAINER_RESPONSE) { params->response_packet = malloc(dtoh32(usbdata.length)); if (!params->response_packet) return PTP_RC_GeneralError; memcpy(params->response_packet, (uint8_t *) &usbdata, dtoh32(usbdata.length)); params->response_packet_size = dtoh32(usbdata.length); ret = PTP_RC_OK; } else { ret = PTP_ERROR_DATA_EXPECTED; } break; } if (dtoh16(usbdata.code)!=ptp->Code) { /* A creative Zen device breaks down here, by leaving out * Code and Transaction ID */ if (MTP_ZEN_BROKEN_HEADER(params)) { gp_log (GP_LOG_DEBUG, "ptp2/ptp_usb_getdata", "Read broken PTP header (Code is %04x vs %04x), compensating.", dtoh16(usbdata.code), ptp->Code ); usbdata.code = dtoh16(ptp->Code); usbdata.trans_id = htod32(ptp->Transaction_ID); } else { gp_log (GP_LOG_ERROR, "ptp2/ptp_usb_getdata", "Read broken PTP header (Code is %04x vs %04x).", dtoh16(usbdata.code), ptp->Code ); ret = PTP_ERROR_IO; break; } } if (usbdata.length == 0xffffffffU) { unsigned char *data = malloc (PTP_USB_BULK_HS_MAX_PACKET_LEN_READ); if (!data) return PTP_RC_GeneralError; /* Copy first part of data to 'data' */ handler->putfunc( params, handler->priv, rlen - PTP_USB_BULK_HDR_LEN, usbdata.payload.data, &written ); /* stuff data directly to passed data handler */ while (1) { unsigned long written; int result = gp_port_read (camera->port, (char*)data, PTP_USB_BULK_HS_MAX_PACKET_LEN_READ); if (result < 0) { free (data); return PTP_ERROR_IO; } handler->putfunc (params, handler->priv, result, data, &written); if (result < PTP_USB_BULK_HS_MAX_PACKET_LEN_READ) break; } free (data); return PTP_RC_OK; } if (rlen > dtoh32(usbdata.length)) { /* * Buffer the surplus response packet if it is >= * PTP_USB_BULK_HDR_LEN * (i.e. it is probably an entire package) * else discard it as erroneous surplus data. * This will even work if more than 2 packets appear * in the same transaction, they will just be handled * iteratively. * * Marcus observed stray bytes on iRiver devices; * these are still discarded. */ unsigned int packlen = dtoh32(usbdata.length); unsigned int surplen = rlen - packlen; if (surplen >= PTP_USB_BULK_HDR_LEN) { params->response_packet = malloc(surplen); if (!params->response_packet) return PTP_RC_GeneralError; memcpy(params->response_packet, (uint8_t *) &usbdata + packlen, surplen); params->response_packet_size = surplen; } else { gp_log (GP_LOG_DEBUG, "ptp2/ptp_usb_getdata", "read %ld bytes too much, expect problems!", rlen - dtoh32(usbdata.length)); } rlen = packlen; } /* For most PTP devices rlen is 512 == sizeof(usbdata) * here. For MTP devices splitting header and data it might * be 12. */ /* Evaluate full data length. */ len=dtoh32(usbdata.length)-PTP_USB_BULK_HDR_LEN; /* autodetect split header/data MTP devices */ if (dtoh32(usbdata.length) > 12 && (rlen==12)) params->split_header_data = 1; /* Copy first part of data to 'data' */ handler->putfunc( params, handler->priv, rlen - PTP_USB_BULK_HDR_LEN, usbdata.payload.data, &written ); /* Is that all of data? */ if (len+PTP_USB_BULK_HDR_LEN<=rlen) break; /* If not read the rest of it. */ retry: oldsize = 0; data = malloc(READLEN); if (!data) return PTP_RC_GeneralError; bytes_to_read = len - (rlen - PTP_USB_BULK_HDR_LEN); usecontext = (bytes_to_read > CONTEXT_BLOCK_SIZE); ret = PTP_RC_OK; if (usecontext) progressid = gp_context_progress_start (context, (bytes_to_read/CONTEXT_BLOCK_SIZE), _("Downloading...")); curread = 0; res = 0; while (bytes_to_read > 0) { unsigned long toread = bytes_to_read; /* read in large blobs. * if smaller than large blob, read all but the last short packet * depending on EP packetsize. */ if (toread > READLEN) toread = READLEN; else if (toread > params->maxpacketsize) toread = toread - (toread % params->maxpacketsize); res = gp_port_read (camera->port, (char*)data, toread); if (res <= 0) { ret = PTP_ERROR_IO; break; } ret = handler->putfunc (params, handler->priv, res, data, &written ); if (ret != PTP_RC_OK) break; if (written != res) { ret = PTP_ERROR_IO; break; } bytes_to_read -= res; curread += res; if (usecontext && (oldsize/CONTEXT_BLOCK_SIZE < curread/CONTEXT_BLOCK_SIZE)) gp_context_progress_update (context, progressid, curread/CONTEXT_BLOCK_SIZE); if (gp_context_cancel(context) == GP_CONTEXT_FEEDBACK_CANCEL) { ret = PTP_ERROR_CANCEL; break; } oldsize = curread; } free (data); if (usecontext) gp_context_progress_stop (context, progressid); if (res == GP_ERROR_IO_READ) { gp_log (GP_LOG_DEBUG, "ptp2/usbread", "Clearing halt on IN EP and retrying once."); gp_port_usb_clear_halt (camera->port, GP_PORT_USB_ENDPOINT_IN); /* retrying only makes sense if we did not read anything yet */ if ((tries++ < 1) && (curread == 0)) goto retry; } if ((ret!=PTP_RC_OK) && (ret!=PTP_ERROR_CANCEL)) { ret = PTP_ERROR_IO; break; } } while (0); if ((ret!=PTP_RC_OK) && (ret!=PTP_ERROR_CANCEL)) { gp_log (GP_LOG_DEBUG, "ptp2/usb_getdata", "request code 0x%04x getting data error 0x%04x", ptp->Code, ret); } return ret; }
uint16_t ptp_usb_getdata (PTPParams* params, PTPContainer* ptp, PTPDataHandler *handler) { uint16_t ret; PTPUSBBulkContainer usbdata; unsigned char *data = NULL; uint32_t bytes_to_read, bytes_read; Camera *camera = ((PTPData *)params->data)->camera; int report_progress, progress_id = 0, do_retry = TRUE, res = GP_OK; GPContext *context = ((PTPData *)params->data)->context; GP_LOG_D ("Reading PTP_OC 0x%0x (%s) data...", ptp->Code, ptp_get_opcode_name(params, ptp->Code)); PTP_CNT_INIT(usbdata); ret = ptp_usb_getpacket (params, &usbdata, &bytes_read); if (ret != PTP_RC_OK) goto exit; if (dtoh16(usbdata.type) != PTP_USB_CONTAINER_DATA) { /* We might have got a response instead. On error for instance. */ /* TODO: check if bytes_read == usbdata.length */ if (dtoh16(usbdata.type) == PTP_USB_CONTAINER_RESPONSE) { params->response_packet = malloc(dtoh32(usbdata.length)); if (!params->response_packet) return PTP_RC_GeneralError; memcpy(params->response_packet, (uint8_t *) &usbdata, dtoh32(usbdata.length)); params->response_packet_size = dtoh32(usbdata.length); ret = PTP_RC_OK; } else { ret = PTP_ERROR_DATA_EXPECTED; } goto exit; } if (dtoh16(usbdata.code)!=ptp->Code) { /* A creative Zen device breaks down here, by leaving out * Code and Transaction ID */ if (MTP_ZEN_BROKEN_HEADER(params)) { GP_LOG_D ("Read broken PTP header (Code is %04x vs %04x), compensating.", dtoh16(usbdata.code), ptp->Code); usbdata.code = dtoh16(ptp->Code); usbdata.trans_id = htod32(ptp->Transaction_ID); } else { GP_LOG_E ("Read broken PTP header (Code is %04x vs %04x).", dtoh16(usbdata.code), ptp->Code ); ret = PTP_ERROR_IO; goto exit; } } if (bytes_read > dtoh32(usbdata.length)) { /* * Buffer the surplus response packet if it is >= * PTP_USB_BULK_HDR_LEN * (i.e. it is probably an entire package) * else discard it as erroneous surplus data. * This will even work if more than 2 packets appear * in the same transaction, they will just be handled * iteratively. * * Marcus observed stray bytes on iRiver devices; * these are still discarded. */ uint32_t surplen = bytes_read - dtoh32(usbdata.length); if (surplen >= PTP_USB_BULK_HDR_LEN) { params->response_packet = malloc(surplen); if (!params->response_packet) return PTP_RC_GeneralError; memcpy(params->response_packet, (uint8_t *) &usbdata + dtoh32(usbdata.length), surplen); params->response_packet_size = surplen; } else { GP_LOG_D ("Read %ld bytes too much, expect problems!", (long)(bytes_read - dtoh32(usbdata.length))); } bytes_read = dtoh32(usbdata.length); } /* For most PTP devices rlen is 512 == sizeof(usbdata) * here. For MTP devices splitting header and data it might * be PTP_USB_BULK_HDR_LEN (12). */ /* autodetect split header/data MTP devices */ if (dtoh32(usbdata.length) > PTP_USB_BULK_HDR_LEN && (bytes_read==PTP_USB_BULK_HDR_LEN)) params->split_header_data = 1; /* Copy the payload bytes we already read (with the first usb packet) */ ret = handler->putfunc (params, handler->priv, bytes_read - PTP_USB_BULK_HDR_LEN, usbdata.payload.data); if (ret != PTP_RC_OK) goto exit; /* Check if we are done already... */ if (bytes_read >= dtoh32(usbdata.length)) goto exit; /* If not read the rest of it. */ /* Make bytes_to_read contain the number of remaining payload-bytes to read. */ bytes_to_read = dtoh32(usbdata.length) - bytes_read; /* Make bytes_read contain the number of payload-bytes already read. */ bytes_read -= PTP_USB_BULK_HDR_LEN; data = malloc(READLEN); if (!data) return PTP_RC_GeneralError; report_progress = (bytes_to_read > 2*CONTEXT_BLOCK_SIZE) && (dtoh32(usbdata.length) != 0xffffffffU); if (report_progress) progress_id = gp_context_progress_start (context, (bytes_to_read/CONTEXT_BLOCK_SIZE), _("Downloading...")); while (bytes_to_read > 0) { unsigned long chunk_to_read = bytes_to_read; /* if in read-until-short-packet mode, read one packet at a time */ /* else read in large blobs */ /* else read all but the last short packet depending on EP packetsize. */ if (dtoh32(usbdata.length) == 0xffffffffU) chunk_to_read = PTP_USB_BULK_HS_MAX_PACKET_LEN_READ; else if (chunk_to_read > READLEN) chunk_to_read = READLEN; else if (chunk_to_read > params->maxpacketsize) chunk_to_read = chunk_to_read - (chunk_to_read % params->maxpacketsize); res = gp_port_read (camera->port, (char*)data, chunk_to_read); if (res == GP_ERROR_IO_READ && do_retry) { GP_LOG_D ("Clearing halt on IN EP and retrying once."); gp_port_usb_clear_halt (camera->port, GP_PORT_USB_ENDPOINT_IN); /* retrying only once and only if we did not read anything yet */ do_retry = FALSE; continue; } else if (res <= 0) { ret = PTP_ERROR_IO; break; } else do_retry = FALSE; /* once we have succesfully read any data, don't try again */ ret = handler->putfunc (params, handler->priv, res, data); if (ret != PTP_RC_OK) break; if (dtoh32(usbdata.length) == 0xffffffffU) { /* once we have read a short packet, we are done. */ if (res < PTP_USB_BULK_HS_MAX_PACKET_LEN_READ) bytes_to_read = 0; } else bytes_to_read -= res; bytes_read += res; if (report_progress && ((bytes_read-res)/CONTEXT_BLOCK_SIZE < bytes_read/CONTEXT_BLOCK_SIZE)) gp_context_progress_update (context, progress_id, bytes_read/CONTEXT_BLOCK_SIZE); /* Only cancel transfers larger than 1MB. as * canceling did not work on eos_get_viewfinder of 200kb */ if ((bytes_read > 1024*1024) && gp_context_cancel(context) == GP_CONTEXT_FEEDBACK_CANCEL) { ret = PTP_ERROR_CANCEL; break; } } if (report_progress) gp_context_progress_stop (context, progress_id); exit: free (data); if ((ret!=PTP_RC_OK) && (ret!=PTP_ERROR_CANCEL)) { GP_LOG_E ("PTP_OC 0x%04x receiving data failed: %s (0x%04x)", ptp->Code, ptp_strerror(ret, params->deviceinfo.VendorExtensionID), ret); return PTP_ERROR_IO; } return ret; }