static void __init tavorevb_init(void)
{
mfp_config(ARRAY_AND_SIZE(tavorevb_pin_config));
/* on-chip devices */
pxa910_add_uart(1);
pxa168_add_twsi(0, &i2c_info, ARRAY_AND_SIZE(i2c_board_info));
tavorevb_add_nand();
tavorevb_add_onenand();
pxa910_add_ire();
pxa910_add_acipc();
if (tavorevb_keypad_type == 1)
pxa168_add_keypad(&zylonite_keypad_info);
else
pxa168_add_keypad(&tavorevb_keypad_info);
#if defined(CONFIG_MMC_PXA_SDH)
pxa168_add_sdh(0, &tavorevb_sdh_platform_data);
#endif
if(cpu_is_pxa910_Ax()){
pxa910_add_fb(&pxa168_tavorevb_lcd_info);
pxa910_add_fb_ovly(&pxa168_tavorevb_lcd_ovly_info);
}else{
pxa168_add_fb(&pxa168_tavorevb_lcd_info);
pxa168_add_fb_ovly(&pxa168_tavorevb_lcd_ovly_info);
}
#if defined(CONFIG_PXA168_CAMERA)
pxa168_add_cam();
#endif
#ifdef CONFIG_USB_GADGET_PXA_U2O
pxa168_add_u2o(&tavorevb_u2o_info);
#endif
#ifdef CONFIG_USB_OTG
pxa168_add_u2ootg(&tavorevb_u2o_info);
pxa168_add_u2oehci(&tavorevb_u2o_info);
#endif
pxa910_add_ssp(1);
pxa910_add_imm();
pxa168_add_freq();
/* off-chip devices */
platform_device_register(&smc91x_device);
}
static void __init ipcam_init(void)
{
pxa168_set_vdd_iox(VDD_IO0, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO1, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO2, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO3, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO4, VDD_IO_3P3V);
pxa168_mfp_set_fastio_drive(MFP_DS02X);
mfp_config(ARRAY_AND_SIZE(ipcam_pin_config));
/* on-chip devices */
pxa168_add_uart(3);
pxa168_add_ssp(0);
pxa168_add_twsi(0, &pwri2c_info, ARRAY_AND_SIZE(ipcam_i2c_board_info));
pxa168_add_twsi(1, &pwri2c_info, ARRAY_AND_SIZE(pwri2c_board_info));
#ifdef CONFIG_USB_GADGET_PXA_U2O
pxa168_add_u2o(&ipcam_u2o_info);
#endif
#ifdef CONFIG_USB_EHCI_PXA_U2H
pxa168_add_u2h(&ipcam_u2h_info);
#endif
#if defined(CONFIG_MMC_PXA_SDH)
ipcam_init_mmc();
#endif
pxa168_add_mfu(&pxa168_eth_data);
/* off-chip devices */
#if defined(CONFIG_PXA168_CAMERA) && defined(CONFIG_VIDEO_OV7740)
pxa168_add_cam();
#endif
#if defined(CONFIG_VIDEO_OV529)
pxa168_add_ov529(&ov529_encoder_data);
#endif
ipcam_init_spi();
}
static void __init aspenite_init(void)
{
mfp_config(ARRAY_AND_SIZE(aspenite_pin_config));
pxa168_set_vdd_iox(VDD_IO0, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO1, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO2, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO3, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO4, VDD_IO_3P3V);
pxa168_mfp_set_fastio_drive(MFP_DS02X);
/* on-chip devices */
pxa168_add_uart(1);
#if defined(CONFIG_BT_HCIUART) && defined(CONFIG_WLAN_8688_SDIO)
pxa168_add_uart(3);
#endif
aspenite_add_nand();
pxa168_add_ssp(0);
#if defined(CONFIG_MTD_M25P80) && defined(CONFIG_SPI_PXA2XX)
pxa168_add_ssp(1);
pxa168_add_spi(2, &pxa_ssp_master_info);
spi_flashinit();
#endif
pxa168_add_twsi(0, &pwri2c_info, ARRAY_AND_SIZE(aspenite_i2c_board_info));
pxa168_add_twsi(1, &pwri2c_info, ARRAY_AND_SIZE(pwri2c_board_info));
if (is_android())
pxa168_add_keypad(&aspenite_android_keypad_info);
else
pxa168_add_keypad(&aspenite_keypad_info);
#ifdef CONFIG_USB_GADGET_PXA_U2O
pxa168_add_u2o(&aspenite_u2o_info);
#endif
#ifdef CONFIG_USB_OTG
pxa168_add_u2ootg(&aspenite_u2o_info);
pxa168_add_u2oehci(&aspenite_u2o_info);
#endif
#ifdef CONFIG_USB_EHCI_PXA_U2H
pxa168_add_u2h(&aspenite_u2h_info);
#endif
pxa168_add_mfu(&pxa168_eth_data);
#ifdef CONFIG_PCI
pxa168_add_pcie(&pxa168_pcie_data);
#endif
#if defined(CONFIG_MMC_PXA_SDH)
pxa168_add_sdh(0, &aspenite_sdh_platform_data_MMC1);
#if defined(CONFIG_WLAN_8688_SDIO)
pxa168_add_sdh(1, &aspenite_sdh_platform_data_MMC2);
#if defined(CONFIG_BT_HCIUART)
aspenite_bt_init();
#endif
#endif
#if defined(CONFIG_MMC3)
pxa168_add_sdh(2, &aspenite_sdh_platform_data_MMC3);
#endif
#endif
#if defined(CONFIG_CIR)
pxa168_cir_init(); /*init the gpio */
#endif
#if defined(CONFIG_PXA168_CF)
#if defined(CONFIG_PXA168_CF_USE_GPIO_CARDDETECT)
pxa168_cf_init();
#else
pxa168_add_cf();
#endif
#endif
pxa168_add_freq();
if (machine_is_aspenite()) {
pxa168_add_fb(&aspenite_lcd_info);
pxa168_add_fb_ovly(&aspenite_lcd_ovly_info);
}
/* off-chip devices */
if (machine_is_zylonite2()) {
pxa168_add_fb(&zylonite2_lcd_info);
platform_device_register(&smc91x_device);
}
#if defined(CONFIG_PXA168_CAMERA)
pxa168_add_cam();
#endif
#if defined(CONFIG_PXA_ICR)
pxa168_add_icr();
#endif
#if defined(CONFIG_BATTERY_PXA168)
pxa168_add_battery();
#endif
}
static void __init silvermoon_init(void)
{
int gpio_109 = 109;
CHLOG("Just so you know, the CPU type is 0x%08x\n", read_cpuid_id());
mfp_config(ARRAY_AND_SIZE(silvermoon_pin_config));
pxa168_set_vdd_iox(VDD_IO0, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO1, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO2, VDD_IO_3P3V);
pxa168_set_vdd_iox(VDD_IO3, VDD_IO_1P8V);
pxa168_set_vdd_iox(VDD_IO4, VDD_IO_3P3V);
pxa168_mfp_set_fastio_drive(MFP_DS02X);
//Make sure the GPIO 109 is set as output, level low
if(gpio_request(gpio_109, "GPIO109"))
{
printk(KERN_ERR "GPIO109 Request Failed\n");
}
else
{
gpio_direction_output(gpio_109, 1);
gpio_set_value(gpio_109, 0);
gpio_free(gpio_109);
}
/* on-chip devices */
pxa168_add_uart(1);
// Used for cryptoprocessor
pxa168_add_uart(3);
//turn on the I2C bus for the audio codec (and others)
pxa168_add_twsi(0, &xi2c_info, ARRAY_AND_SIZE(xi2c_board_info));
pxa168_add_twsi(1, &pwri2c_info, ARRAY_AND_SIZE(pwri2c_board_info));
pxa168_add_ssp(0);
#if defined(CONFIG_TOUCHSCREEN_ASPEN) || defined(CONFIG_TOUCHSCREEN_ASPEN_MODULE)
// SSP2 used for CP-based touchscreen
printk( "%s() - attempting to add SSP2 for touchscreen\n", __FUNCTION__ );
silvermoon_ssp_init();
#if defined(CONFIG_TOUCHSCREEN_ASPEN)
// Register platform device now iff not loading as module
silvermoon_touchscreen_init();
#endif
#else
printk( "%s() - CONFIG_TOUCHSCREEN_ASPEN not set??\n", __FUNCTION__ );
#endif
#ifdef CONFIG_USB_GADGET_PXA_U2O
pxa168_add_u2o(&aspenite_u2o_info);
#endif
#ifdef CONFIG_USB_OTG
pxa168_add_u2ootg(&aspenite_u2o_info);
pxa168_add_u2oehci(&aspenite_u2o_info);
#endif
#ifdef CONFIG_USB_EHCI_PXA_U2H
printk( "%s() - adding u2h ehci usb hub\n", __FUNCTION__ );
pxa168_add_u2h(&aspenite_u2h_info);
#endif
// pxa168_add_mfu(&pxa168_eth_data);
#if defined(CONFIG_MMC_PXA_SDH) || defined(CONFIG_MMC_PXA_SDH_MODULE)
#if defined(CONFIG_CHUMBY_SILVERMOON_SDBOOT)
#define WIFI_SDIO_ADDR 1 // MMC2
#else
#define WIFI_SDIO_ADDR 2 // MMC3
#endif
#if defined(CONFIG_WLAN_8688_SDIO) || defined(CONFIG_WLAN_8688_SDIO_MODULE)
#define ESD_SDIO_ADDR 2
#else
#define ESD_SDIO_ADDR 1
#endif
// This is not present but may be needed for the driver to work properly with MMC2/MMC3
pxa168_add_sdh(0, &aspenite_sdh_platform_data_MMC1);
#if defined(CONFIG_WLAN_8688_SDIO) || defined(CONFIG_WLAN_8688_SDIO_MODULE)
pxa168_add_sdh(WIFI_SDIO_ADDR, &aspenite_sdh_platform_data_MMC2);
#endif
#if defined(CONFIG_CHUMBY_SILVERMOON_SDBOOT)
// Addr=2 for MMC3
pxa168_add_sdh(ESD_SDIO_ADDR, &aspenite_sdh_platform_data_MMC3);
printk( "%s() - adding MMC3 init[%d], wifi MMC%d\n", __FUNCTION__, ESD_SDIO_ADDR, WIFI_SDIO_ADDR );
#endif
#endif
#if defined(CONFIG_PXA168_CF)
/* pxa168_add_cf(); */
pxa168_cf_init();
#endif
pxa168_add_freq();
pxa168_add_fb_ovly(&silvermoon_lcd_ovly_info);
pxa168_add_fb(&silvermoon_lcd_info);
#if defined(CONFIG_PXA168_CAMERA) || defined(CONFIG_PXA168_CAMERA_MODULE)
pxa168_add_cam();
#endif
platform_device_register(&silvermoon_bl_device);
platform_device_register(&pxa910_device_rtc);
}