/**
* @brief Configures and activates the ADC peripheral.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_start(ADCDriver *adcp) {
/* If in stopped state then enables the ADC and DMA clocks.*/
if (adcp->state == ADC_STOP) {
#if STM32_ADC_USE_ADC1
if (&ADCD1 == adcp) {
bool b;
b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
osalDbgAssert(!b, "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
rccEnableADC1(FALSE);
}
#endif /* STM32_ADC_USE_ADC1 */
#if STM32_ADC_USE_ADC2
if (&ADCD2 == adcp) {
bool b;
b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC2_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
osalDbgAssert(!b, "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC2->DR);
rccEnableADC2(FALSE);
}
#endif /* STM32_ADC_USE_ADC2 */
#if STM32_ADC_USE_ADC3
if (&ADCD3 == adcp) {
bool b;
b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC3_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
osalDbgAssert(!b, "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC3->DR);
rccEnableADC3(FALSE);
}
#endif /* STM32_ADC_USE_ADC3 */
/* This is a common register but apparently it requires that at least one
of the ADCs is clocked in order to allow writing, see bug 3575297.*/
ADC->CCR = (ADC->CCR & (ADC_CCR_TSVREFE | ADC_CCR_VBATE)) |
(STM32_ADC_ADCPRE << 16);
/* ADC initial setup, starting the analog part here in order to reduce
the latency when starting a conversion.*/
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
adcp->adc->CR2 = ADC_CR2_ADON;
}
}
/**
* @brief Configures and activates the ADC peripheral.
*
* @param[in] adcp pointer to the @p ADCDriver object
*
* @notapi
*/
void adc_lld_start(ADCDriver *adcp) {
/* If in stopped state then enables the ADC and DMA clocks.*/
if (adcp->state == ADC_STOP) {
#if STM32_ADC_USE_ADC1
if (&ADCD1 == adcp) {
bool_t b;
b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
chDbgAssert(!b, "adc_lld_start(), #1", "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
rccEnableADC1(FALSE);
}
#endif /* STM32_ADC_USE_ADC1 */
#if STM32_ADC_USE_ADC2
if (&ADCD2 == adcp) {
bool_t b;
b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC2_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
chDbgAssert(!b, "adc_lld_start(), #2", "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC2->DR);
rccEnableADC2(FALSE);
}
#endif /* STM32_ADC_USE_ADC2 */
#if STM32_ADC_USE_ADC3
if (&ADCD3 == adcp) {
bool_t b;
b = dmaStreamAllocate(adcp->dmastp,
STM32_ADC_ADC3_DMA_IRQ_PRIORITY,
(stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
(void *)adcp);
chDbgAssert(!b, "adc_lld_start(), #3", "stream already allocated");
dmaStreamSetPeripheral(adcp->dmastp, &ADC3->DR);
rccEnableADC3(FALSE);
}
#endif /* STM32_ADC_USE_ADC3 */
/* ADC initial setup, starting the analog part here in order to reduce
the latency when starting a conversion.*/
adcp->adc->CR1 = 0;
adcp->adc->CR2 = 0;
adcp->adc->CR2 = ADC_CR2_ADON;
}
}
