/* Ws Bs Wd Bd Ps .transformPQR_scale_wb[012] Pd
The default TransformPQR procedure is implemented in C, rather than
PostScript, as a speed optimization.
This TransformPQR implements a relative colorimetric intent by scaling
the XYZ values relative to the white and black points.
*/
static int
ztpqr_scale_wb_common(i_ctx_t *i_ctx_p, int idx)
{
os_ptr op = osp;
double a[4], Ps; /* a[0] = ws, a[1] = bs, a[2] = wd, a[3] = bd */
double result;
int code;
int i;
code = real_param(op, &Ps);
if (code < 0) return code;
for (i = 0; i < 4; i++) {
ref tmp;
code = array_get(imemory, op - 4 + i, idx, &tmp);
if (code >= 0)
code = real_param(&tmp, &a[i]);
if (code < 0) return code;
}
if (a[0] == a[1])
return_error(e_undefinedresult);
result = a[3] + (a[2] - a[3]) * (Ps - a[1]) / (a[0] - a[1]);
make_real(op - 4, result);
pop(4);
return 0;
}
/* <angle> <matrix> rotate <matrix> */
static int
zrotate(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
int code;
double ang;
if ((code = real_param(op, &ang)) >= 0) {
code = gs_rotate(igs, ang);
if (code < 0)
return code;
} else { /* matrix operand */
gs_matrix mat;
/* The num_params failure might be a stack underflow. */
check_op(1);
if ((code = num_params(op - 1, 1, &ang)) < 0 ||
(code = gs_make_rotation(ang, &mat)) < 0 ||
(code = write_matrix(op, &mat)) < 0
) { /* Might be a stack underflow. */
check_op(2);
return code;
}
op[-1] = *op;
}
pop(1);
return code;
}
int
float_param(const ref * op, float *pparam)
{
double dval;
int code = real_param(op, &dval);
if (code >= 0)
*pparam = (float)dval; /* can't overflow */
return code;
}
/* <font> <scale> scalefont <new_font> */
static int
zscalefont(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
int code;
double scale;
gs_matrix mat;
if ((code = real_param(op, &scale)) < 0)
return code;
if ((code = gs_make_scaling(scale, scale, &mat)) < 0)
return code;
return make_font(i_ctx_p, &mat);
}
static int
zset_real(i_ctx_t *i_ctx_p, int (*set_proc)(gs_state *, floatp))
{
os_ptr op = osp;
double param;
int code = real_param(op, ¶m);
if (code < 0)
return_op_typecheck(op);
code = set_proc(igs, param);
if (!code)
pop(1);
return code;
}
/* <alpha> setalpha - */
static int
zsetalpha(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
double alpha;
int code;
if (real_param(op, &alpha) < 0)
return_op_typecheck(op);
if ((code = gs_setalpha(igs, alpha)) < 0)
return code;
pop(1);
return 0;
}
/* <smoothness> setsmoothness - */
static int
zsetsmoothness(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
double smoothness;
int code;
if (real_param(op, &smoothness) < 0)
return_op_typecheck(op);
if ((code = gs_setsmoothness(igs, smoothness)) < 0)
return code;
pop(1);
return 0;
}
/* Continuation procedure for processing sampled pixels. */
static int
set_screen_continue(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
double value;
int code = real_param(op, &value);
if (code < 0)
return code;
code = gs_screen_next(senum, value);
if (code < 0)
return code;
pop(1);
return screen_sample(i_ctx_p);
}
/* <num> <bool> .setdotlength - */
static int
zsetdotlength(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
double length;
int code = real_param(op - 1, &length);
if (code < 0)
return code;
check_type(*op, t_boolean);
code = gs_setdotlength(igs, length, op->value.boolval);
if (code < 0)
return code;
pop(2);
return 0;
}
/* dissolve - */
static int
zdissolve(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
gs_composite_alpha_params_t params;
double delta;
int code = real_param(op, &delta);
if (code < 0)
return code;
if (delta < 0 || delta > 1)
return_error(e_rangecheck);
params.op = composite_Dissolve;
params.delta = delta;
return composite_image(i_ctx_p, ¶ms);
}
/* <num> setlinewidth - */
static int
zsetlinewidth(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
/*
* The Red Book doesn't say anything about this, but Adobe
* interpreters return (or perhaps store) the absolute value
* of the width.
*/
double width;
int code = real_param(op, &width);
if (code < 0)
return_op_typecheck(op);
code = gs_setlinewidth(igs, fabs(width));
if (code >= 0)
pop(1);
return code;
}
/* <array> <offset> setdash - */
static int
zsetdash(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
os_ptr op1 = op - 1;
double offset;
int code = real_param(op, &offset);
uint i, n;
gs_memory_t *mem = imemory;
float *pattern;
if (code < 0)
return_op_typecheck(op);
if (!r_is_array(op1))
return_op_typecheck(op1);
/* Adobe interpreters apparently don't check the array for */
/* read access, so we won't either. */
/*check_read(*op1); */
/* Unpack the dash pattern and check it */
n = r_size(op1);
pattern =
(float *)gs_alloc_byte_array(mem, n, sizeof(float), "setdash");
if (pattern == 0)
return_error(e_VMerror);
for (i = 0, code = 0; i < n && code >= 0; ++i) {
ref element;
array_get(mem, op1, (long)i, &element);
code = float_param(&element, &pattern[i]);
}
if (code >= 0)
code = gs_setdash(igs, pattern, n, offset);
gs_free_object(mem, pattern, "setdash"); /* gs_setdash copies this */
if (code < 0)
return code;
ref_assign(&istate->dash_pattern_array, op1);
pop(2);
return code;
}
/* <mark> <x0> <y0> ... <xn> <yn> .pdfinkpath - */
static int
zpdfinkpath(i_ctx_t *i_ctx_p)
{
os_ptr optr, op = osp;
uint count = ref_stack_counttomark(&o_stack);
uint i, ocount;
int code;
double x0, y0, x1, y1, x2, y2, x3, y3, xc1, yc1, xc2, yc2, xc3, yc3;
double len1, len2, len3, k1, k2, xm1, ym1, xm2, ym2;
double ctrl1_x, ctrl1_y, ctrl2_x, ctrl2_y;
const double smooth_value = 1; /* from 0..1 range */
if (count == 0)
return_error(e_unmatchedmark);
if ((count & 1) == 0 || count < 3)
return_error(e_rangecheck);
ocount = count - 1;
optr = op - ocount + 1;
if ((code = real_param(optr, &x1)) < 0)
return code;
if ((code = real_param(optr + 1, &y1)) < 0)
return code;
if ((code = gs_moveto(igs, x1, y1)) < 0)
return code;
if (ocount == 2)
goto pop;
if ((code = real_param(optr + 2, &x2)) < 0)
return code;
if ((code = real_param(optr + 3, &y2)) < 0)
return code;
if (ocount == 4) {
if((code = gs_lineto(igs, x2, y2)) < 0)
return code;
goto pop;
}
x0 = 2*x1 - x2;
y0 = 2*y1 - y2;
for (i = 4; i <= ocount; i += 2) {
if (i < ocount) {
if ((code = real_param(optr + i, &x3)) < 0)
return code;
if ((code = real_param(optr + i + 1, &y3)) < 0)
return code;
} else {
x3 = 2*x2 - x1;
y3 = 2*y2 - y1;
}
xc1 = (x0 + x1) / 2.0;
yc1 = (y0 + y1) / 2.0;
xc2 = (x1 + x2) / 2.0;
yc2 = (y1 + y2) / 2.0;
xc3 = (x2 + x3) / 2.0;
yc3 = (y2 + y3) / 2.0;
len1 = hypot(x1 - x0, y1 - y0);
len2 = hypot(x2 - x1, y2 - y1);
len3 = hypot(x3 - x2, y3 - y2);
k1 = len1 / (len1 + len2);
k2 = len2 / (len2 + len3);
xm1 = xc1 + (xc2 - xc1) * k1;
ym1 = yc1 + (yc2 - yc1) * k1;
xm2 = xc2 + (xc3 - xc2) * k2;
ym2 = yc2 + (yc3 - yc2) * k2;
ctrl1_x = xm1 + (xc2 - xm1) * smooth_value + x1 - xm1;
ctrl1_y = ym1 + (yc2 - ym1) * smooth_value + y1 - ym1;
ctrl2_x = xm2 + (xc2 - xm2) * smooth_value + x2 - xm2;
ctrl2_y = ym2 + (yc2 - ym2) * smooth_value + y2 - ym2;
code = gs_curveto(igs, ctrl1_x, ctrl1_y, ctrl2_x, ctrl2_y, x2, y2);
if (code < 0)
return code;
x0 = x1, x1 = x2, x2 = x3;
y0 = y1, y1 = y2, y2 = y3;
}
pop:
ref_stack_pop(&o_stack, count);
return 0;
}
/*
* Continuation procedure for processing sampled values.
*/
static int
sampled_data_continue(i_ctx_t *i_ctx_p)
{
os_ptr op = osp;
gs_sampled_data_enum *penum = senum;
gs_function_Sd_params_t * params =
(gs_function_Sd_params_t *)&penum->pfn->params;
int i, j, num_out = params->n;
int code = 0;
byte * data_ptr;
double sampled_data_value_max = (double)((1 << params->BitsPerSample) - 1);
int bps = bits2bytes(params->BitsPerSample), stack_depth_adjust = 0;
/*
* Check to make sure that the procedure produced the correct number of
* values. If not, move the stack back to where it belongs and abort
*/
if (num_out + O_STACK_PAD + penum->o_stack_depth != ref_stack_count(&o_stack)) {
stack_depth_adjust = ref_stack_count(&o_stack) - penum->o_stack_depth;
if (stack_depth_adjust < 0) {
/*
* If we get to here then there were major problems. The function
* removed too many items off of the stack. We had placed extra
* (unused) stack stack space to allow for this but the function
* exceeded even that. Data on the stack may have been lost.
* The only thing that we can do is move the stack pointer back and
* hope. (We have not seen real Postscript files that have this
* problem.)
*/
push(-stack_depth_adjust);
ifree_object(penum->pfn, "sampled_data_continue(pfn)");
ifree_object(penum, "sampled_data_continue((enum)");
return_error(e_undefinedresult);
}
}
/* Save data from the given function */
data_ptr = cube_ptr_from_index(params, penum->indexes);
for (i=0; i < num_out; i++) {
ulong cv;
double value;
double rmin = params->Range[2 * i];
double rmax = params->Range[2 * i + 1];
code = real_param(op + i - num_out + 1, &value);
if (code < 0)
return code;
if (value < rmin)
value = rmin;
else if (value > rmax)
value = rmax;
value = (value - rmin) / (rmax - rmin); /* Convert to 0 to 1.0 */
cv = (int) (value * sampled_data_value_max + 0.5);
for (j = 0; j < bps; j++)
data_ptr[bps * i + j] = (byte)(cv >> ((bps - 1 - j) * 8)); /* MSB first */
}
pop(num_out); /* Move op to base of result values */
/* Check if we are done collecting data. */
if (increment_cube_indexes(params, penum->indexes)) {
if (stack_depth_adjust == 0)
pop(O_STACK_PAD); /* Remove spare stack space */
else
pop(stack_depth_adjust - num_out);
/* Execute the closing procedure, if given */
code = 0;
if (esp_finish_proc != 0)
code = esp_finish_proc(i_ctx_p);
return code;
} else {
if (stack_depth_adjust) {
stack_depth_adjust -= num_out;
push(O_STACK_PAD - stack_depth_adjust);
for (i=0;i<O_STACK_PAD - stack_depth_adjust;i++)
make_null(op - i);
}
}
/* Now get the data for the next location */
return sampled_data_sample(i_ctx_p);
}
