Esempi in C++ (Cpp) per release_io_ix1micro

Esempio n. 1

File: ix1_micro.c Progetto: ManiacTwister/linux-hnd

static int
ix1_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
	u_long flags;

	switch (mt) {
		case CARD_RESET:
			spin_lock_irqsave(&cs->lock, flags);
			ix1_reset(cs);
			spin_unlock_irqrestore(&cs->lock, flags);
			return(0);
		case CARD_RELEASE:
			release_io_ix1micro(cs);
			return(0);
		case CARD_INIT:
			spin_lock_irqsave(&cs->lock, flags);
			ix1_reset(cs);
			inithscxisac(cs, 3);
			spin_unlock_irqrestore(&cs->lock, flags);
			return(0);
		case CARD_TEST:
			return(0);
	}
	return(0);
}

Esempio n. 2

File: ix1_micro.c Progetto: chinnyannieb/empeg-hijack

__initfunc(int
setup_ix1micro(struct IsdnCard *card))
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (check_region((cs->hw.ix1.cfg_reg), 4)) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		} else
			request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg");
	}
	printk(KERN_INFO
	       "HiSax: %s config irq:%d io:0x%X\n",
	       CardType[cs->typ], cs->irq,
	       cs->hw.ix1.cfg_reg);
	ix1_reset(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}

Esempio n. 3

File: ix1_micro.c Progetto: chinnyannieb/empeg-hijack

static int
ix1_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
	switch (mt) {
		case CARD_RESET:
			ix1_reset(cs);
			return(0);
		case CARD_RELEASE:
			release_io_ix1micro(cs);
			return(0);
		case CARD_INIT:
			inithscxisac(cs, 3);
			return(0);
		case CARD_TEST:
			return(0);
	}
	return(0);
}

Esempio n. 4

static int
ix1_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
	switch (mt) {
		case CARD_RESET:
			ix1_reset(cs);
			return(0);
		case CARD_RELEASE:
			release_io_ix1micro(cs);
			return(0);
		case CARD_SETIRQ:
			return(request_irq(cs->irq, &ix1micro_interrupt,
					I4L_IRQ_FLAG, "HiSax", cs));
		case CARD_INIT:
			inithscxisac(cs, 3);
			return(0);
		case CARD_TEST:
			return(0);
	}
	return(0);
}

Esempio n. 5

File: ix1_micro.c Progetto: ManiacTwister/linux-hnd

int __devinit
setup_ix1micro(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
	printk(KERN_INFO "HiSax: ITK IX1 driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

					printk(KERN_INFO "HiSax: %s detected\n",
						(char *)ipid->driver_data);
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
							__FUNCTION__, err);
						return(0);
					}
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1]) {
						printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
							card->para[0], card->para[1]);
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
					printk(KERN_ERR "ITK PnP: PnP error card found, no device\n");
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
			printk(KERN_INFO "ITK PnP: no ISAPnP card found\n");
			return(0);
		}
	}
#endif
	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
			printk(KERN_WARNING
			  "HiSax: %s config port %x-%x already in use\n",
			       CardType[card->typ],
			       cs->hw.ix1.cfg_reg,
			       cs->hw.ix1.cfg_reg + 4);
			return (0);
		}
	}
	printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
		CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
		printk(KERN_WARNING
		    "ix1-Micro: wrong HSCX versions check IO address\n");
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}

Esempio n. 6

File: ix1_micro.c Progetto: rrowicki/Chrono_Kernel-1

int __devinit
setup_ix1micro(struct IsdnCard *card)
{
	struct IsdnCardState *cs = card->cs;
	char tmp[64];

	strcpy(tmp, ix1_revision);
;
	if (cs->typ != ISDN_CTYPE_IX1MICROR2)
		return (0);

#ifdef __ISAPNP__
	if (!card->para[1] && isapnp_present()) {
		struct pnp_dev *pnp_d;
		while(ipid->card_vendor) {
			if ((pnp_c = pnp_find_card(ipid->card_vendor,
				ipid->card_device, pnp_c))) {
				pnp_d = NULL;
				if ((pnp_d = pnp_find_dev(pnp_c,
					ipid->vendor, ipid->function, pnp_d))) {
					int err;

//					printk(KERN_INFO "HiSax: %s detected\n",
;
					pnp_disable_dev(pnp_d);
					err = pnp_activate_dev(pnp_d);
					if (err<0) {
//						printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
;
						return(0);
					}
					card->para[1] = pnp_port_start(pnp_d, 0);
					card->para[0] = pnp_irq(pnp_d, 0);
					if (!card->para[0] || !card->para[1]) {
//						printk(KERN_ERR "ITK PnP:some resources are missing %ld/%lx\n",
;
						pnp_disable_dev(pnp_d);
						return(0);
					}
					break;
				} else {
;
				}
			}
			ipid++;
			pnp_c = NULL;
		} 
		if (!ipid->card_vendor) {
;
			return(0);
		}
	}
#endif
	/* IO-Ports */
	cs->hw.ix1.isac_ale = card->para[1] + ISAC_COMMAND_OFFSET;
	cs->hw.ix1.hscx_ale = card->para[1] + HSCX_COMMAND_OFFSET;
	cs->hw.ix1.isac = card->para[1] + ISAC_DATA_OFFSET;
	cs->hw.ix1.hscx = card->para[1] + HSCX_DATA_OFFSET;
	cs->hw.ix1.cfg_reg = card->para[1];
	cs->irq = card->para[0];
	if (cs->hw.ix1.cfg_reg) {
		if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
//			printk(KERN_WARNING
//			  "HiSax: ITK ix1-micro Rev.2 config port "
//			  "%x-%x already in use\n",
//			       cs->hw.ix1.cfg_reg,
;
			return (0);
		}
	}
//	printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
;
	setup_isac(cs);
	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;
	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &ix1_card_msg;
	cs->irq_func = &ix1micro_interrupt;
	ISACVersion(cs, "ix1-Micro:");
	if (HscxVersion(cs, "ix1-Micro:")) {
//		printk(KERN_WARNING
;
		release_io_ix1micro(cs);
		return (0);
	}
	return (1);
}