static int
niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
int imode;
switch (mt) {
case CARD_RESET:
niccy_reset(cs);
return(0);
case CARD_RELEASE:
release_io_niccy(cs);
return(0);
case CARD_SETIRQ:
if (cs->subtyp == NICCY_PCI)
imode = I4L_IRQ_FLAG | SA_SHIRQ;
else
imode = I4L_IRQ_FLAG;
return(request_irq(cs->irq, &niccy_interrupt,
imode, "HiSax", cs));
break;
case CARD_INIT:
niccy_reset(cs);
return(0);
case CARD_TEST:
return(0);
}
return(0);
}
static int
niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
switch (mt) {
case CARD_RESET:
niccy_reset(cs);
return(0);
case CARD_RELEASE:
release_io_niccy(cs);
return(0);
case CARD_INIT:
niccy_reset(cs);
return(0);
case CARD_TEST:
return(0);
}
return(0);
}
static int niccy_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
u_long flags;
switch (mt) {
case CARD_RESET:
spin_lock_irqsave(&cs->lock, flags);
niccy_reset(cs);
spin_unlock_irqrestore(&cs->lock, flags);
return 0;
case CARD_RELEASE:
release_io_niccy(cs);
return 0;
case CARD_INIT:
spin_lock_irqsave(&cs->lock, flags);
niccy_reset(cs);
spin_unlock_irqrestore(&cs->lock, flags);
return 0;
case CARD_TEST:
return 0;
}
return 0;
}
int __init
setup_niccy(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, niccy_revision);
printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_NICCY)
return (0);
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pci_bus *pb;
struct pci_dev *pd;
if ((pb = isapnp_find_card(
ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pnp_c))) {
pnp_c = pb;
pd = NULL;
if (!(pd = isapnp_find_dev(pnp_c,
ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pd))) {
printk(KERN_ERR "NiccyPnP: PnP error card found, no device\n");
return (0);
}
pd->prepare(pd);
pd->deactivate(pd);
pd->activate(pd);
card->para[1] = pd->resource[0].start;
card->para[2] = pd->resource[1].start;
card->para[0] = pd->irq_resource[0].start;
if (!card->para[0] || !card->para[1] || !card->para[2]) {
printk(KERN_ERR "NiccyPnP:some resources are missing %ld/%lx/%lx\n",
card->para[0], card->para[1], card->para[2]);
pd->deactivate(pd);
return(0);
}
} else {
printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
}
}
#endif
if (card->para[1]) {
cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
cs->hw.niccy.cfg_reg = 0;
cs->subtyp = NICCY_PNP;
cs->irq = card->para[0];
if (check_region((cs->hw.niccy.isac), 2)) {
printk(KERN_WARNING
"HiSax: %s data port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac,
cs->hw.niccy.isac + 1);
return (0);
} else
request_region(cs->hw.niccy.isac, 2, "niccy data");
if (check_region((cs->hw.niccy.isac_ale), 2)) {
printk(KERN_WARNING
"HiSax: %s address port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac_ale,
cs->hw.niccy.isac_ale + 1);
release_region(cs->hw.niccy.isac, 2);
return (0);
} else
request_region(cs->hw.niccy.isac_ale, 2, "niccy addr");
} else {
#if CONFIG_PCI
u_int pci_ioaddr;
if (!pci_present()) {
printk(KERN_ERR "Niccy: no PCI bus present\n");
return(0);
}
cs->subtyp = 0;
if ((niccy_dev = pci_find_device(PCI_VENDOR_ID_SATSAGEM,
PCI_DEVICE_ID_SATSAGEM_NICCY, niccy_dev))) {
if (pci_enable_device(niccy_dev))
return(0);
/* get IRQ */
if (!niccy_dev->irq) {
printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n");
return(0);
}
cs->irq = niccy_dev->irq;
cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
if (!cs->hw.niccy.cfg_reg) {
printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
return(0);
}
pci_ioaddr = pci_resource_start(niccy_dev, 1);
if (!pci_ioaddr) {
printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
return(0);
}
cs->subtyp = NICCY_PCI;
} else {
printk(KERN_WARNING "Niccy: No PCI card found\n");
return(0);
}
cs->irq_flags |= SA_SHIRQ;
cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
if (check_region((cs->hw.niccy.isac), 4)) {
printk(KERN_WARNING
"HiSax: %s data port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac,
cs->hw.niccy.isac + 4);
return (0);
} else
request_region(cs->hw.niccy.isac, 4, "niccy");
if (check_region(cs->hw.niccy.cfg_reg, 0x40)) {
printk(KERN_WARNING
"HiSax: %s pci port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.cfg_reg,
cs->hw.niccy.cfg_reg + 0x40);
release_region(cs->hw.niccy.isac, 4);
return (0);
} else {
request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci");
}
#else
printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
return (0);
#endif /* CONFIG_PCI */
}
printk(KERN_INFO
"HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
CardType[cs->typ], (cs->subtyp==1) ? "PnP":"PCI",
cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &niccy_card_msg;
cs->irq_func = &niccy_interrupt;
ISACVersion(cs, "Niccy:");
if (HscxVersion(cs, "Niccy:")) {
printk(KERN_WARNING
"Niccy: wrong HSCX versions check IO address\n");
release_io_niccy(cs);
return (0);
}
return (1);
}
int __devinit setup_niccy(struct IsdnCard *card)
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, niccy_revision);
printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_NICCY)
return 0;
#ifdef __ISAPNP__
if (!card->para[1] && isapnp_present()) {
struct pnp_dev *pnp_d = NULL;
int err;
pnp_c = pnp_find_card(ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pnp_c);
if (pnp_c) {
pnp_d = pnp_find_dev(pnp_c,
ISAPNP_VENDOR('S', 'D', 'A'),
ISAPNP_FUNCTION(0x0150), pnp_d);
if (!pnp_d) {
printk(KERN_ERR "NiccyPnP: PnP error card "
"found, no device\n");
return 0;
}
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err < 0) {
printk(KERN_WARNING "%s: pnp_activate_dev "
"ret(%d)\n", __func__, err);
return 0;
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[2] = pnp_port_start(pnp_d, 1);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1] ||
!card->para[2]) {
printk(KERN_ERR "NiccyPnP:some resources are "
"missing %ld/%lx/%lx\n",
card->para[0], card->para[1],
card->para[2]);
pnp_disable_dev(pnp_d);
return 0;
}
} else
printk(KERN_INFO "NiccyPnP: no ISAPnP card found\n");
}
#endif
if (card->para[1]) {
cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
cs->hw.niccy.cfg_reg = 0;
cs->subtyp = NICCY_PNP;
cs->irq = card->para[0];
if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
"already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
return 0;
}
if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
"already in use\n",
cs->hw.niccy.isac_ale,
cs->hw.niccy.isac_ale + 1);
release_region(cs->hw.niccy.isac, 2);
return 0;
}
} else {
#ifdef CONFIG_PCI
static struct pci_dev *niccy_dev __devinitdata;
u_int pci_ioaddr;
cs->subtyp = 0;
if ((niccy_dev = hisax_find_pci_device(PCI_VENDOR_ID_SATSAGEM,
PCI_DEVICE_ID_SATSAGEM_NICCY,
niccy_dev))) {
if (pci_enable_device(niccy_dev))
return 0;
/* get IRQ */
if (!niccy_dev->irq) {
printk(KERN_WARNING
"Niccy: No IRQ for PCI card found\n");
return 0;
}
cs->irq = niccy_dev->irq;
cs->hw.niccy.cfg_reg = pci_resource_start(niccy_dev, 0);
if (!cs->hw.niccy.cfg_reg) {
printk(KERN_WARNING
"Niccy: No IO-Adr for PCI cfg found\n");
return 0;
}
pci_ioaddr = pci_resource_start(niccy_dev, 1);
if (!pci_ioaddr) {
printk(KERN_WARNING
"Niccy: No IO-Adr for PCI card found\n");
return 0;
}
cs->subtyp = NICCY_PCI;
} else {
printk(KERN_WARNING "Niccy: No PCI card found\n");
return 0;
}
cs->irq_flags |= IRQF_SHARED;
cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
printk(KERN_WARNING
"HiSax: NICCY data port %x-%x already in use\n",
cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
return 0;
}
if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
printk(KERN_WARNING
"HiSax: NICCY pci port %x-%x already in use\n",
cs->hw.niccy.cfg_reg,
cs->hw.niccy.cfg_reg + 0x40);
release_region(cs->hw.niccy.isac, 4);
return 0;
}
#else
printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
return 0;
#endif /* CONFIG_PCI */
}
printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
(cs->subtyp == 1) ? "PnP" : "PCI",
cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
setup_isac(cs);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &niccy_card_msg;
cs->irq_func = &niccy_interrupt;
ISACVersion(cs, "Niccy:");
if (HscxVersion(cs, "Niccy:")) {
printk(KERN_WARNING "Niccy: wrong HSCX versions check IO "
"address\n");
release_io_niccy(cs);
return 0;
}
return 1;
}
__initfunc(int
setup_niccy(struct IsdnCard *card))
{
struct IsdnCardState *cs = card->cs;
char tmp[64];
strcpy(tmp, niccy_revision);
printk(KERN_INFO "HiSax: Niccy driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ != ISDN_CTYPE_NICCY)
return (0);
if (card->para[1]) {
cs->hw.niccy.isac = card->para[1] + ISAC_PNP;
cs->hw.niccy.hscx = card->para[1] + HSCX_PNP;
cs->hw.niccy.isac_ale = card->para[2] + ISAC_PNP;
cs->hw.niccy.hscx_ale = card->para[2] + HSCX_PNP;
cs->hw.niccy.cfg_reg = 0;
cs->subtyp = NICCY_PNP;
cs->irq = card->para[0];
if (check_region((cs->hw.niccy.isac), 2)) {
printk(KERN_WARNING
"HiSax: %s data port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac,
cs->hw.niccy.isac + 1);
return (0);
} else
request_region(cs->hw.niccy.isac, 2, "niccy data");
if (check_region((cs->hw.niccy.isac_ale), 2)) {
printk(KERN_WARNING
"HiSax: %s address port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac_ale,
cs->hw.niccy.isac_ale + 1);
release_region(cs->hw.niccy.isac, 2);
return (0);
} else
request_region(cs->hw.niccy.isac_ale, 2, "niccy addr");
} else {
#if CONFIG_PCI
u_char pci_bus, pci_device_fn, pci_irq;
u_int pci_ioaddr;
cs->subtyp = 0;
for (; pci_index < 0xff; pci_index++) {
if (pcibios_find_device(PCI_VENDOR_DR_NEUHAUS,
PCI_NICCY_ID, pci_index, &pci_bus, &pci_device_fn)
== PCIBIOS_SUCCESSFUL)
cs->subtyp = NICCY_PCI;
else
break;
/* get IRQ */
pcibios_read_config_byte(pci_bus, pci_device_fn,
PCI_INTERRUPT_LINE, &pci_irq);
/* get IO pci AMCC address */
pcibios_read_config_dword(pci_bus, pci_device_fn,
PCI_BASE_ADDRESS_0, &pci_ioaddr);
if (!pci_ioaddr) {
printk(KERN_WARNING "Niccy: No IO-Adr for PCI cfg found\n");
return(0);
}
cs->hw.niccy.cfg_reg = pci_ioaddr & ~3 ;
/* get IO address */
pcibios_read_config_dword(pci_bus, pci_device_fn,
PCI_BASE_ADDRESS_1, &pci_ioaddr);
if (cs->subtyp)
break;
}
if (!cs->subtyp) {
printk(KERN_WARNING "Niccy: No PCI card found\n");
return(0);
}
pci_index++;
if (!pci_irq) {
printk(KERN_WARNING "Niccy: No IRQ for PCI card found\n");
return(0);
}
if (!pci_ioaddr) {
printk(KERN_WARNING "Niccy: No IO-Adr for PCI card found\n");
return(0);
}
pci_ioaddr &= ~3; /* remove io/mem flag */
cs->hw.niccy.isac = pci_ioaddr + ISAC_PCI_DATA;
cs->hw.niccy.isac_ale = pci_ioaddr + ISAC_PCI_ADDR;
cs->hw.niccy.hscx = pci_ioaddr + HSCX_PCI_DATA;
cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
cs->irq = pci_irq;
if (check_region((cs->hw.niccy.isac), 4)) {
printk(KERN_WARNING
"HiSax: %s data port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.isac,
cs->hw.niccy.isac + 4);
return (0);
} else
request_region(cs->hw.niccy.isac, 4, "niccy");
if (check_region(cs->hw.niccy.cfg_reg, 0x80)) {
printk(KERN_WARNING
"HiSax: %s pci port %x-%x already in use\n",
CardType[card->typ],
cs->hw.niccy.cfg_reg,
cs->hw.niccy.cfg_reg + 0x80);
release_region(cs->hw.niccy.isac, 4);
return (0);
} else {
request_region(cs->hw.niccy.cfg_reg, 0x80, "niccy pci");
}
#else
printk(KERN_WARNING "Niccy: io0 0 and NO_PCI_BIOS\n");
printk(KERN_WARNING "Niccy: unable to config NICCY PCI\n");
return (0);
#endif /* CONFIG_PCI */
}
printk(KERN_INFO
"HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
CardType[cs->typ], (cs->subtyp==1) ? "PnP":"PCI",
cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &niccy_card_msg;
ISACVersion(cs, "Niccy:");
if (HscxVersion(cs, "Niccy:")) {
printk(KERN_WARNING
"Niccy: wrong HSCX versions check IO address\n");
release_io_niccy(cs);
return (0);
}
return (1);
}