static void button_tick(void)
{
static int count = 0;
static int repeat_speed = REPEAT_INTERVAL_START;
static int repeat_count = 0;
static bool repeat = false;
static bool post = false;
#ifdef HAVE_BACKLIGHT
static bool skip_release = false;
#ifdef HAVE_REMOTE_LCD
static bool skip_remote_release = false;
#endif
#endif
int diff;
int btn;
#ifdef HAVE_BUTTON_DATA
int data = 0;
#else
const int data = 0;
#endif
#if defined(HAS_SERIAL_REMOTE) && !defined(SIMULATOR)
/* Post events for the remote control */
btn = remote_control_rx();
if(btn)
button_try_post(btn, 0);
#endif
#ifdef HAVE_BUTTON_DATA
btn = button_read(&data);
#else
btn = button_read();
#endif
#if defined(HAVE_HEADPHONE_DETECTION)
if (headphones_inserted() != phones_present)
{
/* Use the autoresetting oneshot to debounce the detection signal */
phones_present = !phones_present;
timeout_register(&hp_detect_timeout, btn_detect_callback,
HZ/2, phones_present);
}
#endif
/* Find out if a key has been released */
diff = btn ^ lastbtn;
if(diff && (btn & diff) == 0)
{
#ifdef HAVE_BACKLIGHT
#ifdef HAVE_REMOTE_LCD
if(diff & BUTTON_REMOTE)
if(!skip_remote_release)
button_try_post(BUTTON_REL | diff, data);
else
skip_remote_release = false;
else
#endif
if(!skip_release)
button_try_post(BUTTON_REL | diff, data);
else
skip_release = false;
#else
button_try_post(BUTTON_REL | diff, data);
#endif
}
else
{
if ( btn )
{
/* normal keypress */
if ( btn != lastbtn )
{
post = true;
repeat = false;
repeat_speed = REPEAT_INTERVAL_START;
}
else /* repeat? */
{
if ( repeat )
{
if (!post)
count--;
if (count == 0) {
post = true;
/* yes we have repeat */
if (repeat_speed > REPEAT_INTERVAL_FINISH)
repeat_speed--;
count = repeat_speed;
repeat_count++;
/* Send a SYS_POWEROFF event if we have a device
which doesn't shut down easily with the OFF
key */
#ifdef HAVE_SW_POWEROFF
if ((btn & POWEROFF_BUTTON
#ifdef RC_POWEROFF_BUTTON
|| btn == RC_POWEROFF_BUTTON
#endif
) &&
#if CONFIG_CHARGING && !defined(HAVE_POWEROFF_WHILE_CHARGING)
!charger_inserted() &&
#endif
repeat_count > POWEROFF_COUNT)
{
/* Tell the main thread that it's time to
power off */
sys_poweroff();
/* Safety net for players without hardware
poweroff */
#if (CONFIG_PLATFORM & PLATFORM_NATIVE)
if(repeat_count > POWEROFF_COUNT * 10)
power_off();
#endif
}
#endif
}
}
else
{
if (count++ > REPEAT_START)
{
post = true;
repeat = true;
repeat_count = 0;
/* initial repeat */
count = REPEAT_INTERVAL_START;
}
#ifdef HAVE_TOUCHSCREEN
else if (lastdata != data && btn == lastbtn)
{ /* only coordinates changed, post anyway */
if (touchscreen_get_mode() == TOUCHSCREEN_POINT)
post = true;
}
#endif
}
}
if ( post )
{
if (repeat)
{
/* Only post repeat events if the queue is empty,
* to avoid afterscroll effects. */
if (button_try_post(BUTTON_REPEAT | btn, data))
{
#ifdef HAVE_BACKLIGHT
#ifdef HAVE_REMOTE_LCD
skip_remote_release = false;
#endif
skip_release = false;
#endif
post = false;
}
}
else
{
#ifdef HAVE_BACKLIGHT
#ifdef HAVE_REMOTE_LCD
if (btn & BUTTON_REMOTE) {
if (!remote_filter_first_keypress
|| is_remote_backlight_on(false)
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
|| (remote_type()==REMOTETYPE_H300_NONLCD)
#endif
)
button_try_post(btn, data);
else
skip_remote_release = true;
}
else
#endif
if (!filter_first_keypress || is_backlight_on(false)
#if BUTTON_REMOTE
|| (btn & BUTTON_REMOTE)
#endif
)
button_try_post(btn, data);
else
skip_release = true;
#else /* no backlight, nothing to skip */
button_try_post(btn, data);
#endif
post = false;
}
#ifdef HAVE_REMOTE_LCD
if(btn & BUTTON_REMOTE)
remote_backlight_on();
else
#endif
{
backlight_on();
#ifdef HAVE_BUTTON_LIGHT
buttonlight_on();
#endif
}
reset_poweroff_timer();
}
}
else
{
repeat = false;
count = 0;
}
}
lastbtn = btn & ~(BUTTON_REL | BUTTON_REPEAT);
#ifdef HAVE_BUTTON_DATA
lastdata = data;
#endif
}
bool dbg_ports(void)
{
unsigned int gpio_out;
unsigned int gpio1_out;
unsigned int gpio_read;
unsigned int gpio1_read;
unsigned int gpio_function;
unsigned int gpio1_function;
unsigned int gpio_enable;
unsigned int gpio1_enable;
int adc_battery_voltage, adc_battery_level;
int adc_buttons, adc_remote;
int line;
lcd_clear_display();
lcd_setfont(FONT_SYSFIXED);
while(1)
{
line = 0;
gpio_read = GPIO_READ;
gpio1_read = GPIO1_READ;
gpio_out = GPIO_OUT;
gpio1_out = GPIO1_OUT;
gpio_function = GPIO_FUNCTION;
gpio1_function = GPIO1_FUNCTION;
gpio_enable = GPIO_ENABLE;
gpio1_enable = GPIO1_ENABLE;
lcd_putsf(0, line++, "GPIO_READ: %08x", gpio_read);
lcd_putsf(0, line++, "GPIO_OUT: %08x", gpio_out);
lcd_putsf(0, line++, "GPIO_FUNC: %08x", gpio_function);
lcd_putsf(0, line++, "GPIO_ENA: %08x", gpio_enable);
lcd_putsf(0, line++, "GPIO1_READ: %08x", gpio1_read);
lcd_putsf(0, line++, "GPIO1_OUT: %08x", gpio1_out);
lcd_putsf(0, line++, "GPIO1_FUNC: %08x", gpio1_function);
lcd_putsf(0, line++, "GPIO1_ENA: %08x", gpio1_enable);
adc_buttons = adc_read(ADC_BUTTONS);
adc_remote = adc_read(ADC_REMOTE);
battery_read_info(&adc_battery_voltage, &adc_battery_level);
#if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(IRIVER_H300_SERIES)
lcd_putsf(0, line++, "ADC_BUTTONS (%c): %02x",
button_scan_enabled() ? '+' : '-', adc_buttons);
#else
lcd_putsf(0, line++, "ADC_BUTTONS: %02x", adc_buttons);
#endif
#if defined(IAUDIO_X5) || defined(IAUDIO_M5)
lcd_putsf(0, line++, "ADC_REMOTE (%c): %02x",
remote_detect() ? '+' : '-', adc_remote);
#else
lcd_putsf(0, line++, "ADC_REMOTE: %02x", adc_remote);
#endif
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
lcd_putsf(0, line++, "ADC_REMOTEDETECT: %02x",
adc_read(ADC_REMOTEDETECT));
#endif
battery_read_info(&adc_battery_voltage, &adc_battery_level);
lcd_putsf(0, line++, "Batt: %d.%03dV %d%% ", adc_battery_voltage / 1000,
adc_battery_voltage % 1000, adc_battery_level);
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
lcd_putsf(0, line++, "remotetype: %d", remote_type());
#endif
lcd_update();
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
{
lcd_setfont(FONT_UI);
return false;
}
}
return false;
}
