static void
handle_signal(unsigned long sig, struct k_sigaction *ka,
siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, int syscall)
{
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = current;
int usig = sig;
int ret;
/*
* If we were from a system call, check for system call restarting...
*/
if (syscall) {
switch (regs->r5) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->r5 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->r5 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
restart_syscall(regs);
}
}
/*
* translate the signal
*/
if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
usig = thread->exec_domain->signal_invmap[usig];
/*
* Set up the stack frame
*/
if (ka->sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame(usig, ka, info, oldset, regs);
else
ret = setup_frame(usig, ka, oldset, regs);
if (ret != 0) {
force_sigsegv(sig, tsk);
return;
}
/*
* Block the signal if we were successful.
*/
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&tsk->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
}
static ssize_t ifalias_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t len)
{
struct net_device *netdev = to_net_dev(dev);
struct net *net = dev_net(netdev);
size_t count = len;
ssize_t ret = 0;
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
/* ignore trailing newline */
if (len > 0 && buf[len - 1] == '\n')
--count;
if (!rtnl_trylock())
return restart_syscall();
if (dev_isalive(netdev)) {
ret = dev_set_alias(netdev, buf, count);
if (ret < 0)
goto err;
ret = len;
netdev_state_change(netdev);
}
err:
rtnl_unlock();
return ret;
}
static ssize_t brport_store(struct kobject *kobj,
struct attribute *attr,
const char *buf, size_t count)
{
struct brport_attribute *brport_attr = to_brport_attr(attr);
struct net_bridge_port *p = to_brport(kobj);
ssize_t ret = -EINVAL;
char *endp;
unsigned long val;
if (!ns_capable(dev_net(p->dev)->user_ns, CAP_NET_ADMIN))
return -EPERM;
val = simple_strtoul(buf, &endp, 0);
if (endp != buf) {
if (!rtnl_trylock())
return restart_syscall();
if (p->dev && p->br && brport_attr->store) {
spin_lock_bh(&p->br->lock);
ret = brport_attr->store(p, val);
spin_unlock_bh(&p->br->lock);
if (!ret) {
br_ifinfo_notify(RTM_NEWLINK, p);
ret = count;
}
}
rtnl_unlock();
}
return ret;
}
static ssize_t phys_switch_id_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct net_device *netdev = to_net_dev(dev);
ssize_t ret = -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
if (dev_isalive(netdev)) {
struct switchdev_attr attr = {
.orig_dev = netdev,
.id = SWITCHDEV_ATTR_ID_PORT_PARENT_ID,
.flags = SWITCHDEV_F_NO_RECURSE,
};
ret = switchdev_port_attr_get(netdev, &attr);
if (!ret)
ret = sprintf(buf, "%*phN\n", attr.u.ppid.id_len,
attr.u.ppid.id);
}
rtnl_unlock();
return ret;
}
static ssize_t duplex_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct net_device *netdev = to_net_dev(dev);
int ret = -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
if (netif_running(netdev)) {
struct ethtool_link_ksettings cmd;
if (!__ethtool_get_link_ksettings(netdev, &cmd)) {
const char *duplex;
switch (cmd.base.duplex) {
case DUPLEX_HALF:
duplex = "half";
break;
case DUPLEX_FULL:
duplex = "full";
break;
default:
duplex = "unknown";
break;
}
ret = sprintf(buf, "%s\n", duplex);
}
}
rtnl_unlock();
return ret;
}
/* use same locking and permission rules as SIF* ioctl's */
static ssize_t netdev_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t len,
int (*set)(struct net_device *, unsigned long))
{
struct net_device *netdev = to_net_dev(dev);
struct net *net = dev_net(netdev);
unsigned long new;
int ret = -EINVAL;
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
ret = kstrtoul(buf, 0, &new);
if (ret)
goto err;
if (!rtnl_trylock())
return restart_syscall();
if (dev_isalive(netdev)) {
ret = (*set)(netdev, new);
if (ret == 0)
ret = len;
}
rtnl_unlock();
err:
return ret;
}
/*
* Common code for storing bridge parameters.
*/
static ssize_t store_bridge_parm(struct device *d,
const char *buf, size_t len,
int (*set)(struct net_bridge *, unsigned long))
{
struct net_bridge *br = to_bridge(d);
char *endp;
unsigned long val;
int err;
if (!ns_capable(dev_net(br->dev)->user_ns, CAP_NET_ADMIN))
return -EPERM;
val = simple_strtoul(buf, &endp, 0);
if (endp == buf)
return -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
err = (*set)(br, val);
if (!err)
netdev_state_change(br->dev);
rtnl_unlock();
return err ? err : len;
}
~CPtrace() {
restart_syscall();
if (ptrace(PTRACE_SETREGS, m_pid, 0, &m_regs_bak) < 0) {
perror("setregs");
}
if (ptrace(PTRACE_DETACH, m_pid, NULL, NULL) < 0) {
perror("detach");
}
}
static ssize_t ifalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
const struct net_device *netdev = to_net_dev(dev);
ssize_t ret = 0;
if (!rtnl_trylock())
return restart_syscall();
if (netdev->ifalias)
ret = sprintf(buf, "%s\n", netdev->ifalias);
rtnl_unlock();
return ret;
}
/**
* bond_opt_tryset_rtnl - try to acquire rtnl and call __bond_opt_set
* @bond: target bond device
* @option: option to set
* @buf: value to set it to
*
* This function tries to acquire RTNL without blocking and if successful
* calls __bond_opt_set. It is mainly used for sysfs option manipulation.
*/
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf)
{
struct bond_opt_value optval;
int ret;
if (!rtnl_trylock())
return restart_syscall();
bond_opt_initstr(&optval, buf);
ret = __bond_opt_set_notify(bond, option, &optval);
rtnl_unlock();
return ret;
}
int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)
{
if (!rtnl_trylock())
return restart_syscall();
if (br->vlan_enabled == val)
goto unlock;
br->vlan_enabled = val;
unlock:
rtnl_unlock();
return 0;
}
static ssize_t speed_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct net_device *netdev = to_net_dev(dev);
int ret = -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
if (netif_running(netdev)) {
struct ethtool_link_ksettings cmd;
if (!__ethtool_get_link_ksettings(netdev, &cmd))
ret = sprintf(buf, fmt_dec, cmd.base.speed);
}
rtnl_unlock();
return ret;
}
static ssize_t raw_ip_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
{
struct usbnet *dev = netdev_priv(to_net_dev(d));
struct qmi_wwan_state *info = (void *)&dev->data;
bool enable;
int ret;
if (strtobool(buf, &enable))
return -EINVAL;
/* no change? */
if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
return len;
if (!rtnl_trylock())
return restart_syscall();
/* we don't want to modify a running netdev */
if (netif_running(dev->net)) {
netdev_err(dev->net, "Cannot change a running device\n");
ret = -EBUSY;
goto err;
}
/* let other drivers deny the change */
ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net);
ret = notifier_to_errno(ret);
if (ret) {
netdev_err(dev->net, "Type change was refused\n");
goto err;
}
if (enable)
info->flags |= QMI_WWAN_FLAG_RAWIP;
else
info->flags &= ~QMI_WWAN_FLAG_RAWIP;
qmi_wwan_netdev_setup(dev->net);
call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net);
ret = len;
err:
rtnl_unlock();
return ret;
}
static ssize_t phys_port_name_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct net_device *netdev = to_net_dev(dev);
ssize_t ret = -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
if (dev_isalive(netdev)) {
char name[IFNAMSIZ];
ret = dev_get_phys_port_name(netdev, name, sizeof(name));
if (!ret)
ret = sprintf(buf, "%s\n", name);
}
rtnl_unlock();
return ret;
}
static ssize_t phys_switch_id_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct net_device *netdev = to_net_dev(dev);
ssize_t ret = -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
if (dev_isalive(netdev)) {
struct netdev_phys_item_id ppid = { };
ret = dev_get_port_parent_id(netdev, &ppid, false);
if (!ret)
ret = sprintf(buf, "%*phN\n", ppid.id_len, ppid.id);
}
rtnl_unlock();
return ret;
}
static ssize_t group_addr_store(struct device *d,
struct device_attribute *attr,
const char *buf, size_t len)
{
struct net_bridge *br = to_bridge(d);
u8 new_addr[6];
int i;
if (!ns_capable(dev_net(br->dev)->user_ns, CAP_NET_ADMIN))
return -EPERM;
if (sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
&new_addr[0], &new_addr[1], &new_addr[2],
&new_addr[3], &new_addr[4], &new_addr[5]) != 6)
return -EINVAL;
if (!is_link_local_ether_addr(new_addr))
return -EINVAL;
if (new_addr[5] == 1 || /* 802.3x Pause address */
new_addr[5] == 2 || /* 802.3ad Slow protocols */
new_addr[5] == 3) /* 802.1X PAE address */
return -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
spin_lock_bh(&br->lock);
for (i = 0; i < 6; i++)
br->group_addr[i] = new_addr[i];
spin_unlock_bh(&br->lock);
br->group_addr_set = true;
br_recalculate_fwd_mask(br);
netdev_state_change(br->dev);
rtnl_unlock();
return len;
}
static ssize_t stp_state_store(struct device *d,
struct device_attribute *attr, const char *buf,
size_t len)
{
struct net_bridge *br = to_bridge(d);
char *endp;
unsigned long val;
if (!ns_capable(dev_net(br->dev)->user_ns, CAP_NET_ADMIN))
return -EPERM;
val = simple_strtoul(buf, &endp, 0);
if (endp == buf)
return -EINVAL;
if (!rtnl_trylock())
return restart_syscall();
br_stp_set_enabled(br, val);
rtnl_unlock();
return len;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
struct k_sigaction *ka;
siginfo_t info;
int single_stepping;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (!oldset)
oldset = ¤t->blocked;
single_stepping = ptrace_cancel_bpt(current);
for (;;) {
unsigned long signr;
spin_lock_irq (¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq (¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->p_pptr->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
/* Are we from a system call? */
if (syscall) {
switch (regs->ARM_r0) {
case -ERESTARTNOHAND:
regs->ARM_r0 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ARM_r0 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
restart_syscall(regs);
break;
}
}
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
if (single_stepping)
ptrace_set_bpt(current);
return 1;
}
if (syscall &&
(regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR)) {
restart_syscall(regs);
}
if (single_stepping)
ptrace_set_bpt(current);
return 0;
}
static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (try_to_freeze())
goto no_signal;
/*
*FIXME: I don't know how to trace TriMedia executable.
*/
#if 0
if (current->ptrace & PT_SINGLESTEP)
ptrace_cancel_bpt(current);
#endif
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
handle_signal(signr, &ka, &info, oldset, regs, syscall);
/*
*FIXME: I don't know how to trace TriMedia executable.
*/
#if 0
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
#endif
return 1;
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->r5 == -ERESTART_RESTARTBLOCK) {
regs->r5=__NR_restart_syscall;
regs->dpc=regs->spc;
}
if (regs->r5 == -ERESTARTNOHAND ||
regs->r5 == -ERESTARTSYS ||
regs->r5 == -ERESTARTNOINTR) {
restart_syscall(regs);
}
}
/*
*FIXME: I don't know how to trace TriMedia executable.
*/
#if 0
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
#endif
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
siginfo_t info;
int signr;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (current->flags & PF_FREEZE) {
refrigerator(0);
goto no_signal;
}
if (current->ptrace & PT_SINGLESTEP)
ptrace_cancel_bpt(current);
signr = get_signal_to_deliver(&info, regs, NULL);
if (signr > 0) {
handle_signal(signr, &info, oldset, regs, syscall);
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
return 1;
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall;
regs->ARM_pc -= 2;
} else {
u32 __user *usp;
regs->ARM_sp -= 12;
usp = (u32 __user *)regs->ARM_sp;
put_user(regs->ARM_pc, &usp[0]);
/* swi __NR_restart_syscall */
put_user(0xef000000 | __NR_restart_syscall, &usp[1]);
/* ldr pc, [sp], #12 */
put_user(0xe49df00c, &usp[2]);
flush_icache_range((unsigned long)usp,
(unsigned long)(usp + 3));
regs->ARM_pc = regs->ARM_sp + 4;
}
}
if (regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR) {
restart_syscall(regs);
}
}
if (current->ptrace & PT_SINGLESTEP)
ptrace_set_bpt(current);
return 0;
}
/*
* OK, we're invoking a handler
*/
static void
handle_signal(unsigned long sig, siginfo_t *info, sigset_t *oldset,
struct pt_regs * regs, int syscall)
{
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = current;
struct k_sigaction *ka = &tsk->sighand->action[sig-1];
int usig = sig;
int ret;
/*
* If we were from a system call, check for system call restarting...
*/
if (syscall) {
switch (regs->ARM_r0) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ARM_r0 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ARM_r0 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
restart_syscall(regs);
}
}
/*
* translate the signal
*/
if (usig < 32 && thread->exec_domain && thread->exec_domain->signal_invmap)
usig = thread->exec_domain->signal_invmap[usig];
/*
* Set up the stack frame
*/
if (ka->sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame(usig, ka, info, oldset, regs);
else
ret = setup_frame(usig, ka, oldset, regs);
/*
* Check that the resulting registers are actually sane.
*/
ret |= !valid_user_regs(regs);
/*
* Block the signal if we were unsuccessful.
*/
if (ret != 0 || !(ka->sa.sa_flags & SA_NODEFER)) {
spin_lock_irq(&tsk->sighand->siglock);
sigorsets(&tsk->blocked, &tsk->blocked,
&ka->sa.sa_mask);
sigaddset(&tsk->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&tsk->sighand->siglock);
}
if (ret == 0) {
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
return;
}
if (sig == SIGSEGV)
ka->sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, tsk);
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
#ifdef CONFIG_PREEMPT_RT
/*
* Fully-preemptible kernel does not need interrupts disabled:
*/
local_irq_enable();
preempt_check_resched();
#endif
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (try_to_freeze())
goto no_signal;
single_step_clear(current);
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
handle_signal(signr, &ka, &info, oldset, regs, syscall);
single_step_set(current);
return 1;
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
regs->ARM_pc -= 2;
} else {
#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
regs->ARM_r7 = __NR_restart_syscall;
regs->ARM_pc -= 4;
#else
u32 __user *usp;
u32 swival = __NR_restart_syscall;
regs->ARM_sp -= 12;
usp = (u32 __user *)regs->ARM_sp;
/*
* Either we supports OABI only, or we have
* EABI with the OABI compat layer enabled.
* In the later case we don't know if user
* space is EABI or not, and if not we must
* not clobber r7. Always using the OABI
* syscall solves that issue and works for
* all those cases.
*/
swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
put_user(regs->ARM_pc, &usp[0]);
/* swi __NR_restart_syscall */
put_user(0xef000000 | swival, &usp[1]);
/* ldr pc, [sp], #12 */
put_user(0xe49df00c, &usp[2]);
flush_icache_range((unsigned long)usp,
(unsigned long)(usp + 3));
regs->ARM_pc = regs->ARM_sp + 4;
#endif
}
}
if (regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR) {
restart_syscall(regs);
}
}
single_step_set(current);
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
static void do_signal(struct pt_regs *regs, int syscall)
{
struct k_sigaction ka;
siginfo_t info;
int signr;
sigset_t *oldset;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return;
if (try_to_freeze())
goto no_signal;
single_step_clear(current);
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
/* a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag */
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
single_step_set(current);
return;
}
no_signal:
/*
* No signal to deliver to the process - restart the syscall.
*/
if (syscall) {
if (regs->ARM_r0 == -ERESTART_RESTARTBLOCK) {
if (thumb_mode(regs)) {
regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE;
regs->ARM_pc -= 2;
} else {
#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT)
regs->ARM_r7 = __NR_restart_syscall;
regs->ARM_pc -= 4;
#else
u32 __user *usp;
u32 swival = __NR_restart_syscall;
regs->ARM_sp -= 12;
usp = (u32 __user *)regs->ARM_sp;
/*
* Either we support OABI only, or we have
* EABI with the OABI compat layer enabled.
* In the later case we don't know if user
* space is EABI or not, and if not we must
* not clobber r7. Always using the OABI
* syscall solves that issue and works for
* all those cases.
*/
swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
put_user(regs->ARM_pc, &usp[0]);
/* swi __NR_restart_syscall */
put_user(0xef000000 | swival, &usp[1]);
/* ldr pc, [sp], #12 */
put_user(0xe49df00c, &usp[2]);
flush_icache_range((unsigned long)usp,
(unsigned long)(usp + 3));
regs->ARM_pc = regs->ARM_sp + 4;
#endif
}
}
if (regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR) {
restart_syscall(regs);
}
}
single_step_set(current);
/* if there's no signal to deliver, we just put the saved sigmask
back. */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
