void matrix_init_user(void)
{
ergodox_led_all_on();
rgblight_init();
rgblight_enable();
rgblight_setrgb(255, 0, 0);
for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--)
{
ergodox_led_all_set(i);
wait_ms(5);
}
rgblight_setrgb(255, 255, 0);
wait_ms(1000);
for (int i = LED_BRIGHTNESS_LO; i > 0; i--)
{
ergodox_led_all_set(i);
wait_ms(10);
}
rgblight_setrgb(0, 255, 255);
ergodox_led_all_off();
wait_ms(1000);
rgblight_effect_knight(50);
}
void keyboard_slave_loop(void) {
matrix_init();
//Init RGB
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
while (1) {
// Matrix Slave Scan
matrix_slave_scan();
// Read Backlight Info
#ifdef BACKLIGHT_ENABLE
#ifdef USE_I2C
if (BACKLIT_DIRTY) {
backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
BACKLIT_DIRTY = false;
}
#else // USE_SERIAL
backlight_set(serial_m2s_buffer.backlight_level);
#endif
#endif
// Read RGB Info
#ifdef RGBLIGHT_ENABLE
#ifdef USE_I2C
if (RGB_DIRTY) {
// Disable interupts (RGB data is big)
cli();
// Create new DWORD for RGB data
uint32_t dword;
// Fill the new DWORD with the data that was sent over
uint8_t *dword_dat = (uint8_t *)(&dword);
for (int i = 0; i < 4; i++) {
dword_dat[i] = i2c_slave_buffer[I2C_RGB_START+i];
}
// Update the RGB now with the new data and set RGB_DIRTY to false
rgblight_update_dword(dword);
RGB_DIRTY = false;
// Re-enable interupts now that RGB is set
sei();
}
#else // USE_SERIAL
#ifdef RGBLIGHT_SPLIT
// Add serial implementation for RGB here
#endif
#endif
#endif
}
}
void matrix_init_kb(void) {
#ifdef BACKLIGHT_ENABLE
backlight_init_ports();
#endif
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
// Turn status LED on
DDRE |= (1<<6);
PORTE |= (1<<6);
matrix_init_user();
}
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
#ifdef BACKLIGHT_ENABLE
// pwm_led_init();
#endif
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
if (matrix_init_user) {
(*matrix_init_user)();
}
};
void matrix_init(void)
{
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
backlight_init_ports();
// initialize row and col
unselect_rows();
init_cols();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
rgblight_init();
}
/** \brief keyboard_init
*
* FIXME: needs doc
*/
void keyboard_init(void) {
timer_init();
// To use PORTF disable JTAG with writing JTD bit twice within four cycles.
#if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega32U4__))
MCUCR |= _BV(JTD);
MCUCR |= _BV(JTD);
#endif
matrix_init();
#ifdef PS2_MOUSE_ENABLE
ps2_mouse_init();
#endif
#ifdef SERIAL_MOUSE_ENABLE
serial_mouse_init();
#endif
#ifdef ADB_MOUSE_ENABLE
adb_mouse_init();
#endif
#ifdef BOOTMAGIC_ENABLE
bootmagic();
#else
magic();
#endif
#ifdef BACKLIGHT_ENABLE
backlight_init();
#endif
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
#ifdef STENO_ENABLE
steno_init();
#endif
#ifdef FAUXCLICKY_ENABLE
fauxclicky_init();
#endif
#ifdef POINTING_DEVICE_ENABLE
pointing_device_init();
#endif
#if defined(NKRO_ENABLE) && defined(FORCE_NKRO)
keymap_config.nkro = 1;
#endif
}
void keyboard_init(void) {
timer_init();
matrix_init();
#ifdef PS2_MOUSE_ENABLE
ps2_mouse_init();
#endif
#ifdef SERIAL_MOUSE_ENABLE
serial_mouse_init();
#endif
#ifdef ADB_MOUSE_ENABLE
adb_mouse_init();
#endif
#ifdef BOOTMAGIC_ENABLE
bootmagic();
#else
magic();
#endif
#ifdef BACKLIGHT_ENABLE
backlight_init();
#endif
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
#ifdef STENO_ENABLE
steno_init();
#endif
#ifdef FAUXCLICKY_ENABLE
fauxclicky_init();
#endif
#ifdef POINTING_DEVICE_ENABLE
pointing_device_init();
#endif
#if defined(NKRO_ENABLE) && defined(FORCE_NKRO)
keymap_config.nkro = 1;
#endif
}
// Runs whenever there is a layer state change.
uint32_t layer_state_set_user(uint32_t state) {
ergodox_board_led_off();
ergodox_right_led_1_off();
ergodox_right_led_2_off();
ergodox_right_led_3_off();
uint8_t layer = biton32(state);
switch (layer) {
case 0:
#ifdef RGBLIGHT_COLOR_LAYER_0
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_0);
#else
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
#endif
break;
case 1:
ergodox_right_led_1_on();
#ifdef RGBLIGHT_COLOR_LAYER_1
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_1);
#endif
break;
case 2:
ergodox_right_led_2_on();
#ifdef RGBLIGHT_COLOR_LAYER_2
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_2);
#endif
break;
case 3:
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_3
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_3);
#endif
break;
case 4:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
#ifdef RGBLIGHT_COLOR_LAYER_4
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_4);
#endif
break;
case 5:
ergodox_right_led_1_on();
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_5
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_5);
#endif
break;
case 6:
ergodox_right_led_2_on();
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_6
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_6);
#endif
break;
case 7:
ergodox_right_led_1_on();
ergodox_right_led_2_on();
ergodox_right_led_3_on();
#ifdef RGBLIGHT_COLOR_LAYER_7
rgblight_setrgb(RGBLIGHT_COLOR_LAYER_6);
#endif
break;
default:
break;
}
return state;
};
