Esempi in C++ (Cpp) per rt2800pci_enable_interrupt

Esempio n. 1

File: rt2800pci.c Progetto: BreakDaLotus/attitude_adjustment

static void rt2800pci_autowake_tasklet(unsigned long data)
{
    struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
    rt2800pci_wakeup(rt2x00dev);
    if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
        rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_AUTO_WAKEUP);
}

Esempio n. 2

File: rt2800pci.c Progetto: BreakDaLotus/attitude_adjustment

static void rt2800pci_tbtt_tasklet(unsigned long data)
{
    struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
    struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
    u32 reg;

    rt2x00lib_beacondone(rt2x00dev);

    if (rt2x00dev->intf_ap_count) {
        /*
         * The rt2800pci hardware tbtt timer is off by 1us per tbtt
         * causing beacon skew and as a result causing problems with
         * some powersaving clients over time. Shorten the beacon
         * interval every 64 beacons by 64us to mitigate this effect.
         */
        if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 2)) {
            rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
            rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
                               (rt2x00dev->beacon_int * 16) - 1);
            rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
        } else if (drv_data->tbtt_tick == (BCN_TBTT_OFFSET - 1)) {
            rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
            rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
                               (rt2x00dev->beacon_int * 16));
            rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
        }
        drv_data->tbtt_tick++;
        drv_data->tbtt_tick %= BCN_TBTT_OFFSET;
    }

    if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
        rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
}

Esempio n. 3

File: rt2800pci.c Progetto: BreakDaLotus/attitude_adjustment

static void rt2800pci_pretbtt_tasklet(unsigned long data)
{
    struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
    rt2x00lib_pretbtt(rt2x00dev);
    if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
        rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_PRE_TBTT);
}

Esempio n. 4

File: rt2800pci.c Progetto: BreakDaLotus/attitude_adjustment

static void rt2800pci_rxdone_tasklet(unsigned long data)
{
    struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
    if (rt2x00pci_rxdone(rt2x00dev))
        tasklet_schedule(&rt2x00dev->rxdone_tasklet);
    else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
        rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
}

Esempio n. 5

File: rt2800pci.c Progetto: CSCLOG/beaglebone

static void rt2800pci_rxdone_tasklet(unsigned long data)
{
	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
	if (rt2x00pci_rxdone(rt2x00dev))
		tasklet_schedule(&rt2x00dev->rxdone_tasklet);
	else
		rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
}

Esempio n. 6

File: rt2800pci.c Progetto: CSCLOG/beaglebone

static void rt2800pci_autowake_tasklet(unsigned long data)
{
	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
	rt2800pci_wakeup(rt2x00dev);
	rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_AUTO_WAKEUP);
}

Esempio n. 7

File: rt2800pci.c Progetto: CSCLOG/beaglebone

static void rt2800pci_tbtt_tasklet(unsigned long data)
{
	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
	rt2x00lib_beacondone(rt2x00dev);
	rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_TBTT);
}

Esempio n. 8

File: rt2800pci.c Progetto: Meticulus/vendor_st-ericsson_u8500

static void rt2800pci_rxdone_tasklet(unsigned long data)
{
	struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
	rt2x00pci_rxdone(rt2x00dev);
	rt2800pci_enable_interrupt(rt2x00dev, INT_MASK_CSR_RX_DONE);
}