static uint16_t
schedule_dequeue(void *qp, struct rte_crypto_op **ops, uint16_t nb_ops)
{
struct psd_scheduler_qp_ctx *qp_ctx =
((struct scheduler_qp_ctx *)qp)->private_qp_ctx;
struct scheduler_slave *slaves[NB_PKT_SIZE_SLAVES] = {
&qp_ctx->primary_slave, &qp_ctx->secondary_slave};
struct scheduler_slave *slave = slaves[qp_ctx->deq_idx];
uint16_t nb_deq_ops_pri = 0, nb_deq_ops_sec = 0;
if (slave->nb_inflight_cops) {
nb_deq_ops_pri = rte_cryptodev_dequeue_burst(slave->dev_id,
slave->qp_id, ops, nb_ops);
slave->nb_inflight_cops -= nb_deq_ops_pri;
}
qp_ctx->deq_idx = (~qp_ctx->deq_idx) & SLAVE_IDX_SWITCH_MASK;
if (nb_deq_ops_pri == nb_ops)
return nb_deq_ops_pri;
slave = slaves[qp_ctx->deq_idx];
if (slave->nb_inflight_cops) {
nb_deq_ops_sec = rte_cryptodev_dequeue_burst(slave->dev_id,
slave->qp_id, &ops[nb_deq_ops_pri],
nb_ops - nb_deq_ops_pri);
slave->nb_inflight_cops -= nb_deq_ops_sec;
if (!slave->nb_inflight_cops)
qp_ctx->deq_idx = (~qp_ctx->deq_idx) &
SLAVE_IDX_SWITCH_MASK;
}
return nb_deq_ops_pri + nb_deq_ops_sec;
}
/* benchmark dequeue */
static void
pmd_cyclecount_bench_deq(struct pmd_cyclecount_state *state,
uint32_t iter_ops_needed, uint16_t test_burst_size)
{
/* Dequeue full descriptor ring of ops on crypto device */
uint32_t cur_iter_op = 0;
while (cur_iter_op < iter_ops_needed) {
uint32_t burst_size = RTE_MIN(iter_ops_needed - cur_iter_op,
test_burst_size);
struct rte_crypto_op **ops_processed =
&state->ctx->ops[cur_iter_op];
uint32_t burst_deqd;
burst_deqd = rte_cryptodev_dequeue_burst(state->ctx->dev_id,
state->ctx->qp_id, ops_processed, burst_size);
if (burst_deqd < burst_size)
state->ops_deq_retries++;
state->ops_deqd += burst_deqd;
cur_iter_op += burst_deqd;
}
}
int
cperf_verify_test_runner(void *test_ctx)
{
struct cperf_verify_ctx *ctx = test_ctx;
uint64_t ops_enqd = 0, ops_enqd_total = 0, ops_enqd_failed = 0;
uint64_t ops_deqd = 0, ops_deqd_total = 0, ops_deqd_failed = 0;
uint64_t ops_failed = 0;
static int only_once;
uint64_t i;
uint16_t ops_unused = 0;
struct rte_crypto_op *ops[ctx->options->max_burst_size];
struct rte_crypto_op *ops_processed[ctx->options->max_burst_size];
uint32_t lcore = rte_lcore_id();
#ifdef CPERF_LINEARIZATION_ENABLE
struct rte_cryptodev_info dev_info;
int linearize = 0;
/* Check if source mbufs require coalescing */
if (ctx->options->segment_sz < ctx->options->max_buffer_size) {
rte_cryptodev_info_get(ctx->dev_id, &dev_info);
if ((dev_info.feature_flags &
RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER) == 0)
linearize = 1;
}
#endif /* CPERF_LINEARIZATION_ENABLE */
ctx->lcore_id = lcore;
if (!ctx->options->csv)
printf("\n# Running verify test on device: %u, lcore: %u\n",
ctx->dev_id, lcore);
uint16_t iv_offset = sizeof(struct rte_crypto_op) +
sizeof(struct rte_crypto_sym_op);
while (ops_enqd_total < ctx->options->total_ops) {
uint16_t burst_size = ((ops_enqd_total + ctx->options->max_burst_size)
<= ctx->options->total_ops) ?
ctx->options->max_burst_size :
ctx->options->total_ops -
ops_enqd_total;
uint16_t ops_needed = burst_size - ops_unused;
/* Allocate objects containing crypto operations and mbufs */
if (rte_mempool_get_bulk(ctx->pool, (void **)ops,
ops_needed) != 0) {
RTE_LOG(ERR, USER1,
"Failed to allocate more crypto operations "
"from the the crypto operation pool.\n"
"Consider increasing the pool size "
"with --pool-sz\n");
return -1;
}
/* Setup crypto op, attach mbuf etc */
(ctx->populate_ops)(ops, ctx->src_buf_offset,
ctx->dst_buf_offset,
ops_needed, ctx->sess, ctx->options,
ctx->test_vector, iv_offset);
/* Populate the mbuf with the test vector, for verification */
for (i = 0; i < ops_needed; i++)
cperf_mbuf_set(ops[i]->sym->m_src,
ctx->options,
ctx->test_vector);
#ifdef CPERF_LINEARIZATION_ENABLE
if (linearize) {
/* PMD doesn't support scatter-gather and source buffer
* is segmented.
* We need to linearize it before enqueuing.
*/
for (i = 0; i < burst_size; i++)
rte_pktmbuf_linearize(ops[i]->sym->m_src);
}
#endif /* CPERF_LINEARIZATION_ENABLE */
/* Enqueue burst of ops on crypto device */
ops_enqd = rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id,
ops, burst_size);
if (ops_enqd < burst_size)
ops_enqd_failed++;
/**
* Calculate number of ops not enqueued (mainly for hw
* accelerators whose ingress queue can fill up).
*/
ops_unused = burst_size - ops_enqd;
ops_enqd_total += ops_enqd;
/* Dequeue processed burst of ops from crypto device */
ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
ops_processed, ctx->options->max_burst_size);
if (ops_deqd == 0) {
/**
* Count dequeue polls which didn't return any
* processed operations. This statistic is mainly
* relevant to hw accelerators.
*/
ops_deqd_failed++;
continue;
}
for (i = 0; i < ops_deqd; i++) {
if (cperf_verify_op(ops_processed[i], ctx->options,
ctx->test_vector))
ops_failed++;
}
/* Free crypto ops so they can be reused. */
rte_mempool_put_bulk(ctx->pool,
(void **)ops_processed, ops_deqd);
ops_deqd_total += ops_deqd;
}
/* Dequeue any operations still in the crypto device */
while (ops_deqd_total < ctx->options->total_ops) {
/* Sending 0 length burst to flush sw crypto device */
rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id, NULL, 0);
/* dequeue burst */
ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
ops_processed, ctx->options->max_burst_size);
if (ops_deqd == 0) {
ops_deqd_failed++;
continue;
}
for (i = 0; i < ops_deqd; i++) {
if (cperf_verify_op(ops_processed[i], ctx->options,
ctx->test_vector))
ops_failed++;
}
/* Free crypto ops so they can be reused. */
rte_mempool_put_bulk(ctx->pool,
(void **)ops_processed, ops_deqd);
ops_deqd_total += ops_deqd;
}
if (!ctx->options->csv) {
if (!only_once)
printf("%12s%12s%12s%12s%12s%12s%12s%12s\n\n",
"lcore id", "Buf Size", "Burst size",
"Enqueued", "Dequeued", "Failed Enq",
"Failed Deq", "Failed Ops");
only_once = 1;
printf("%12u%12u%12u%12"PRIu64"%12"PRIu64"%12"PRIu64
"%12"PRIu64"%12"PRIu64"\n",
ctx->lcore_id,
ctx->options->max_buffer_size,
ctx->options->max_burst_size,
ops_enqd_total,
ops_deqd_total,
ops_enqd_failed,
ops_deqd_failed,
ops_failed);
} else {
if (!only_once)
printf("\n# lcore id, Buffer Size(B), "
"Burst Size,Enqueued,Dequeued,Failed Enq,"
"Failed Deq,Failed Ops\n");
only_once = 1;
printf("%10u;%10u;%u;%"PRIu64";%"PRIu64";%"PRIu64";%"PRIu64";"
"%"PRIu64"\n",
ctx->lcore_id,
ctx->options->max_buffer_size,
ctx->options->max_burst_size,
ops_enqd_total,
ops_deqd_total,
ops_enqd_failed,
ops_deqd_failed,
ops_failed);
}
return 0;
}
