Competences::Competences()
{
table = new QTableWidget();
table->setColumnCount(8);
QStringList liste;
// Création des en-tête
liste << "De classe" << "Innée" << "Compétence" << "Stat." << "Mod. compét." << "Mod. stat." << "Deg. maîtrise" << "Mod. divers";
table->setHorizontalHeaderLabels(liste);
nbCompetences = 0;
setListCompetences();
layoutPrincipal = new QVBoxLayout(this);
layoutHaut = new QHBoxLayout();
layoutPrincipal->addLayout(layoutHaut);
layoutHaut->addWidget(new QLabel("Points à dépenser:"));
aDepenser = new QLineEdit();
aDepenser->setInputMask("99");
aDepenser->setText("");
aDepenser->setFixedSize(40,40);
aDepenser->setAlignment(Qt::AlignCenter);
layoutHaut->addWidget(aDepenser);
layoutHaut->addStretch();
layoutHaut->addWidget(new QLabel("Degré de maîtrise max.:"));
degreMaitriseMaxI = new QLineEdit();
degreMaitriseMaxI->setInputMask("99");
degreMaitriseMaxI->setText("");
degreMaitriseMaxI->setFixedSize(40,40);
degreMaitriseMaxI->setAlignment(Qt::AlignCenter);
layoutHaut->addWidget(degreMaitriseMaxI);
layoutHaut->addWidget(new QLabel("/"));
degreMaitriseMaxN = new QLineEdit();
degreMaitriseMaxN->setInputMask("99");
degreMaitriseMaxN->setText("");
degreMaitriseMaxN->setFixedSize(40,40);
degreMaitriseMaxN->setAlignment(Qt::AlignCenter);
layoutHaut->addWidget(degreMaitriseMaxN);
layoutPrincipal->addWidget(table);
//Tri alphabétique des compétences
table->sortItems(2);
//Resize des colonnes
table->resizeColumnsToContents();
connect(&xmlManager,SIGNAL(requestCompetencesSave()),this,SLOT(receiveSaveRequest()));
connect(this,SIGNAL(saveDone()),&xmlManager,SLOT(competencesSaved()));
}
// ------------------------------------------------------------------------
void DicomParser::okPressed()
{
if(outputFolder.isEmpty())
{
outputFolder = QFileDialog::getExistingDirectory(this,
"Choose output directory","/Users/oliverferoze/Uni/Data/ValveTracking/Testing");
}
if(outputFolder.isEmpty())
return;
DicomSeriesList outputSeries;
getSelectedSeries(outputSeries);
for(unsigned int i = 0; i < outputSeries.size(); i++)
{
writeSeries(outputSeries[i], outputFolder);
}
emit saveDone(outputFolder);
this->close();
}
void Dons::receiveSaveRequest()
{
QDomElement elem;
QDomAttr a;
elem = xmlManager.getDons().firstChildElement("raceClasses");
while(!elem.firstChild().isNull()) // Suppression des anciennes lignes
{
elem.removeChild(elem.firstChild());
}
for(int i=0;i<bonus->rowCount();i++)
{
QDomElement ligneTableau = xmlManager.getDoc().createElement("ligne");
ligneTableau.setAttribute("numero",i);
elem.appendChild(ligneTableau);
for(int j=0;j<bonus->columnCount();j++)
{
QDomElement elemLigne;
if(bonus->horizontalHeaderItem(j)->text() == "Don/Bonus")
elemLigne = xmlManager.getDoc().createElement("donBonus");
else
elemLigne = xmlManager.getDoc().createElement(bonus->horizontalHeaderItem(j)->text());
if(bonus->item(i,j) == NULL)
elemLigne.setAttribute("value","");
else
elemLigne.setAttribute("value",bonus->item(i,j)->text());
ligneTableau.appendChild(elemLigne);
}
}
elem = xmlManager.getDons().firstChildElement("normaux");
while(!elem.firstChild().isNull()) // Suppression des anciennes lignes
{
elem.removeChild(elem.firstChild());
}
for(int i=0;i<dons->rowCount();i++)
{
QDomElement ligneTableau = xmlManager.getDoc().createElement("ligne");
ligneTableau.setAttribute("numero",i);
elem.appendChild(ligneTableau);
for(int j=0;j<dons->columnCount();j++)
{
QDomElement elemLigne;
if(dons->horizontalHeaderItem(j)->text() == "Prérequis")
elemLigne = xmlManager.getDoc().createElement("Prerequis");
else
elemLigne = xmlManager.getDoc().createElement(dons->horizontalHeaderItem(j)->text());
if(dons->item(i,j) == NULL)
elemLigne.setAttribute("value","");
else
elemLigne.setAttribute("value",dons->item(i,j)->text());
ligneTableau.appendChild(elemLigne);
}
}
emit saveDone();
}
Dons::Dons()
{
//Création de la bande bonus
boutonAjoutBonus = new QPushButton("+");
boutonAjoutBonus->setFixedWidth(25);
boutonRetraitBonus = new QPushButton("-");
boutonRetraitBonus->setFixedWidth(25);
ligne1 = new QFrame();
ligne1->setFrameStyle(QFrame::HLine | QFrame::Plain);
l_bonus = new QLabel("Bonus raciaux et de classe");
l_bonus->setAlignment(Qt::AlignCenter);
l_bonus->setFixedWidth(175);
ligne2 = new QFrame();
ligne2->setFrameStyle(QFrame::HLine | QFrame::Plain);
layoutBandeBonus = new QHBoxLayout();
layoutBandeBonus->addWidget(boutonAjoutBonus);
layoutBandeBonus->addWidget(boutonRetraitBonus);
layoutBandeBonus->addWidget(ligne1);
layoutBandeBonus->addWidget(l_bonus);
layoutBandeBonus->addWidget(ligne2);
//Création du tableau bonus
bonus = new QTableWidget();
bonus->setRowCount(2);
bonus->setColumnCount(3);
QStringList liste;
liste << "Don/Bonus" << "Effets" << "Informations";
bonus->setHorizontalHeaderLabels(liste);
//Création de la bande dons
boutonAjoutDon = new QPushButton("+");
boutonAjoutDon->setFixedWidth(25);
boutonRetraitDon = new QPushButton("-");
boutonRetraitDon->setFixedWidth(25);
ligne3 = new QFrame();
ligne3->setFrameStyle(QFrame::HLine | QFrame::Plain);
l_dons = new QLabel("Dons");
l_dons->setAlignment(Qt::AlignCenter);
l_dons->setFixedWidth(50);
ligne4 = new QFrame();
ligne4->setFrameStyle(QFrame::HLine | QFrame::Plain);
layoutBandeDons = new QHBoxLayout();
layoutBandeDons->addWidget(boutonAjoutDon);
layoutBandeDons->addWidget(boutonRetraitDon);
layoutBandeDons->addWidget(ligne3);
layoutBandeDons->addWidget(l_dons);
layoutBandeDons->addWidget(ligne4);
//Création du tableau dons
dons = new QTableWidget();
dons->setRowCount(2);
dons->setColumnCount(4);
liste.clear();
liste << "Don" << "Prérequis" << "Effets" << "Notes";
dons->setHorizontalHeaderLabels(liste);
//Création du layout principal
layout = new QVBoxLayout(this);
layout->addLayout(layoutBandeBonus);
layout->addWidget(bonus);
layout->addLayout(layoutBandeDons);
layout->addWidget(dons);
//Connexion des signaux/slots
connect(boutonAjoutBonus,SIGNAL(clicked()),this,SLOT(ajoutLigneBonus()));
connect(boutonRetraitBonus,SIGNAL(clicked()),this,SLOT(retraitLigneBonus()));
connect(boutonAjoutDon,SIGNAL(clicked()),this,SLOT(ajoutLigneDons()));
connect(boutonRetraitDon,SIGNAL(clicked()),this,SLOT(retraitLigneDons()));
connect(&xmlManager,SIGNAL(requestDonsSave()),this,SLOT(receiveSaveRequest()));
connect(this,SIGNAL(saveDone()),&xmlManager,SLOT(donsSaved()));
}
int main(int argc, char *argv[])
{
qRegisterMetaType<QVector<double> >("QVector<double>");
QApplication a(argc, argv);
argParse arguments;
arguments.parseArgs(a.arguments());
MainWindow w;
packetFifo data_fifo;
//pipeReader piperead("",1472,&data_fifo);
// QThread pt;
// piperead.moveToThread(&pt);
//!! pt.start();
//
// Create fifo to store UDP raw data packets.
//
data_fifo.fillFifo(arguments.q_length,arguments.q_packetlen);
//!! nc -ul 192.168.1.102 50000 | ./testEnet
//
// set up udp receiver, and its own thread.
//
udpRcv myudp(&data_fifo);
QThread udpth;
myudp.moveToThread(&udpth);
udpth.start(QThread::TimeCriticalPriority);
//
//set up packet parser, that splits udp data into two streams.
//
packetParse pparse(&data_fifo);
QThread pparse_th;
pparse.moveToThread(&pparse_th);
pparse_th.start();
dataQueue *stream_a = pparse.getOutQueueA();
dataQueue *stream_b = pparse.getOutQueueB();
//
// set up two parsers.
//
roachParser parser_a(stream_a);
roachParser parser_b(stream_b,128);
QThread parseth_a;
QThread parseth_b;
parser_a.moveToThread(&parseth_a);
parser_b.moveToThread(&parseth_b);
//parser_a.setIsDumpInputDbg(true);
//parser_b.setIsDumpInputDbg(true);
parseth_a.start();
parseth_b.start();
//
// Set up two file savers, one per parser.
// streams to files.
//
//fileSaver fsave_a;
//fileSaver fsave_b;
hdfFileSaver fsave_a;
hdfFileSaver fsave_b;
fsave_a.setEventSource(&parser_a);
fsave_b.setEventSource(&parser_b);
QThread fsaveth_a;
QThread fsaveth_b;
fsave_a.moveToThread(&fsaveth_a);
fsave_b.moveToThread(&fsaveth_b);
fsaveth_a.start();
fsaveth_b.start();
//
// Tell gui about all the objects we have.
//
w.setUdp(&myudp);
w.addParser(&parser_a);
w.addParser(&parser_b);
w.setPacketParser(&pparse);
w.setPacketFifo(&data_fifo);
w.addSaver(&fsave_a);
w.addSaver(&fsave_b);
// start up the udp parser
QMetaObject::invokeMethod(
&pparse,
"writeStreams",
Qt::QueuedConnection);
// connect udp parser output to the roach parsers.
parser_a.connect(
&pparse,
SIGNAL(dataAvailA()),
SLOT(parseStream()),
Qt::QueuedConnection);
parser_b.connect(
&pparse,
SIGNAL(dataAvailB()),
SLOT(parseStream()),
Qt::QueuedConnection);
// timer for periodically updating gui
QTimer disp_timer;
disp_timer.start(200);
w.connect(&disp_timer,SIGNAL(timeout()),SLOT(updateGui()),Qt::QueuedConnection);
//
// text commander. it is a text command interface that listens to a pipe.
// text commands are sent to this pipe from other programs, to remote control
// the gui of this program. python can then hit buttons or call any slot
// in the q obhects here.
//
textCommander cmd(arguments.cmd_in_pipe_name,arguments.cmd_out_pipe_name);
cmd.addNameObject("parser_a",&parser_a);
cmd.addNameObject("parser_b",&parser_b);
cmd.addNameObject("saver_a",&fsave_a);
cmd.addNameObject("saver_b",&fsave_b);
cmd.addNameObject("pparse",&pparse);
// cmd.addNameObject("piperead",&piperead);
cmd.addNameObject("w",&w);
cmd.setAppName("roachstream");
bool isc = cmd.connect(&fsave_a,SIGNAL(saveDone(QString)),SLOT(sendCommand(QString)),Qt::DirectConnection);
isc = cmd.connect(&fsave_b,SIGNAL(saveDone(QString)),SLOT(sendCommand(QString)),Qt::DirectConnection);
#if 1
QThread cmdth;
cmd.moveToThread(&cmdth);
cmdth.start();
QMetaObject::invokeMethod(
&cmd,
"openInputPipe",
Qt::AutoConnection);
QMetaObject::invokeMethod(
&cmd,
"openOutputPipe",
Qt::AutoConnection);
QMetaObject::invokeMethod(
&cmd,
"waitNextCommand",
Qt::AutoConnection);
#endif
w.show();
return a.exec();
}
void Competences::receiveSaveRequest()
{
QDomElement elem;
QDomAttr a;
elem = xmlManager.getCompetences().firstChildElement("pointsADepenser");
a = elem.attributeNode("value");
a.setValue(aDepenser->text());
elem = xmlManager.getCompetences().firstChildElement("degreMaitriseMax");
a = elem.attributeNode("deClasse");
a.setValue(degreMaitriseMaxI->text());
a = elem.attributeNode("inconnue");
a.setValue(degreMaitriseMaxN->text());
elem = xmlManager.getCompetences().firstChildElement("liste");
while(!elem.firstChild().isNull()) // Suppression des anciennes lignes
{
elem.removeChild(elem.firstChild());
}
for(int i=0;i<table->rowCount();i++)
{
QDomElement ligneTableau = xmlManager.getDoc().createElement("ligne");
ligneTableau.setAttribute("numero",i);
elem.appendChild(ligneTableau);
QDomElement elemLigne;
// compétence de classe ou non
elemLigne = xmlManager.getDoc().createElement("deClasse");
if(static_cast<QCheckBox*>(table->cellWidget(i,0))->isChecked())
elemLigne.setAttribute("value","oui");
else
elemLigne.setAttribute("value","non");
ligneTableau.appendChild(elemLigne);
// nom de la compétence
elemLigne = xmlManager.getDoc().createElement("nom");
elemLigne.removeChild(elemLigne.firstChild());
QDomText valeur = xmlManager.getDoc().createTextNode(static_cast<QLabel*>(table->cellWidget(i,2))->text());
elemLigne.appendChild(valeur);
ligneTableau.appendChild(elemLigne);
// degré de maitrise
elemLigne = xmlManager.getDoc().createElement("degreMaitrise");
if(table->item(i,6) == NULL)
elemLigne.setAttribute("value","");
else
elemLigne.setAttribute("value",table->item(i,6)->text());
ligneTableau.appendChild(elemLigne);
// modificateurs divers
elemLigne = xmlManager.getDoc().createElement("modDivers");
if(table->item(i,7) == NULL)
elemLigne.setAttribute("value","");
else
elemLigne.setAttribute("value",table->item(i,7)->text());
ligneTableau.appendChild(elemLigne);
}
emit saveDone();
}
