static int mvme162_scc_init(void)
{
struct scc_port *port;
if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
return (-ENODEV);
printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
/* Init channel A */
port = &scc_ports[0];
port->channel = CHANNEL_A;
port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
port->datap = port->ctrlp + 2;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
"SCC-A TX", port);
request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
"SCC-A status", port);
request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
"SCC-A RX", port);
request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
/* disable interrupts for this channel */
SCCwrite(INT_AND_DMA_REG, 0);
/* Set the interrupt vector */
SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
/* Interrupt parameters: vector includes status, status low */
SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
}
/* Init channel B */
port = &scc_ports[1];
port->channel = CHANNEL_B;
port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
port->datap = port->ctrlp + 2;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
"SCC-B TX", port);
request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
"SCC-B status", port);
request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
"SCC-B RX", port);
request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
"SCC-B special cond", port);
{
SCC_ACCESS_INIT(port); /* Either channel will do */
/* disable interrupts for this channel */
SCCwrite(INT_AND_DMA_REG, 0);
}
/* Ensure interrupts are enabled in the MC2 chip */
*(volatile char *)0xfff4201d = 0x14;
/* Initialise the tty driver structures and register */
scc_init_portstructs();
scc_init_drivers();
return 0;
}
static int __init bvme6000_scc_init(void)
{
struct scc_port *port;
int error;
printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
/* Init channel A */
port = &scc_ports[0];
port->channel = CHANNEL_A;
port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
port->datap = port->ctrlp + 4;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
"SCC-A TX", port);
if (error)
goto fail;
error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-A status", port);
if (error)
goto fail_free_a_tx;
error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
"SCC-A RX", port);
if (error)
goto fail_free_a_stat;
error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int,
IRQF_DISABLED, "SCC-A special cond", port);
if (error)
goto fail_free_a_rx;
{
SCC_ACCESS_INIT(port);
/* disable interrupts for this channel */
SCCwrite(INT_AND_DMA_REG, 0);
/* Set the interrupt vector */
SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
/* Interrupt parameters: vector includes status, status low */
SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
}
/* Init channel B */
port = &scc_ports[1];
port->channel = CHANNEL_B;
port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
port->datap = port->ctrlp + 4;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
"SCC-B TX", port);
if (error)
goto fail_free_a_spcond;
error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
"SCC-B status", port);
if (error)
goto fail_free_b_tx;
error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
"SCC-B RX", port);
if (error)
goto fail_free_b_stat;
error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int,
IRQF_DISABLED, "SCC-B special cond", port);
if (error)
goto fail_free_b_rx;
{
SCC_ACCESS_INIT(port); /* Either channel will do */
/* disable interrupts for this channel */
SCCwrite(INT_AND_DMA_REG, 0);
}
/* Initialise the tty driver structures and register */
scc_init_portstructs();
scc_init_drivers();
return 0;
fail:
free_irq(BVME_IRQ_SCCA_STAT, port);
fail_free_a_tx:
free_irq(BVME_IRQ_SCCA_RX, port);
fail_free_a_stat:
free_irq(BVME_IRQ_SCCA_SPCOND, port);
fail_free_a_rx:
free_irq(BVME_IRQ_SCCB_TX, port);
fail_free_a_spcond:
free_irq(BVME_IRQ_SCCB_STAT, port);
fail_free_b_tx:
free_irq(BVME_IRQ_SCCB_RX, port);
fail_free_b_stat:
free_irq(BVME_IRQ_SCCB_SPCOND, port);
fail_free_b_rx:
return error;
}
static int mvme147_scc_init(void)
{
struct scc_port *port;
printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
/* Init channel A */
port = &scc_ports[0];
port->channel = CHANNEL_A;
port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
port->datap = port->ctrlp + 1;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, SA_INTERRUPT,
"SCC-A TX", port);
request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, SA_INTERRUPT,
"SCC-A status", port);
request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, SA_INTERRUPT,
"SCC-A RX", port);
request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, SA_INTERRUPT,
"SCC-A special cond", port);
{
SCC_ACCESS_INIT(port);
/* disable interrupts for this channel */
SCCwrite(INT_AND_DMA_REG, 0);
/* Set the interrupt vector */
SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
/* Interrupt parameters: vector includes status, status low */
SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
}
/* Init channel B */
port = &scc_ports[1];
port->channel = CHANNEL_B;
port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
port->datap = port->ctrlp + 1;
port->port_a = &scc_ports[0];
port->port_b = &scc_ports[1];
request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, SA_INTERRUPT,
"SCC-B TX", port);
request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, SA_INTERRUPT,
"SCC-B status", port);
request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, SA_INTERRUPT,
"SCC-B RX", port);
request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, SA_INTERRUPT,
"SCC-B special cond", port);
{
SCC_ACCESS_INIT(port);
/* disable interrupts for this channel */
SCCwrite(INT_AND_DMA_REG, 0);
}
/* Ensure interrupts are enabled in the PCC chip */
m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
/* Initialise the tty driver structures and register */
scc_init_portstructs();
scc_init_drivers();
return 0;
}
