Esempi in C++ (Cpp) per sci_adc_init

Esempio n. 1

File: board-sp7715eatrisim.c Progetto: Equalizer48/android_kernel_samsung_j13g

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_ion_addr_param(void);
	    init_ion_addr_param();
	}
#endif
#if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_pstore_addr_param(void);
	    init_pstore_addr_param();
	}
#endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
	sprd_sr2351_gpio_ctrl_power_register(GPIO_RF2351_POWER_CTRL_NUM);

}

Esempio n. 2

File: board.c Progetto: abgoyal/alcatel_ot_4020D_kernel

static void __init sc8825_init_early(void)
{
	/* earlier init request than irq and timer */
	sc8825_clock_init();
	sc8825_enable_timer_early();
	adi_init();	
	sci_adc_init((void __iomem *)ADC_BASE);
}

Esempio n. 3

File: board-sp9830iec_4m_h100.c Progetto: Eyeless95/samsung_g531h_kernel

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n", __sci_get_chip_id());

	sci_adc_init();
#ifndef CONFIG_MACH_SPX35LFPGA
	sci_regulator_init();
#endif
	of_sprd_default_bus_lookup[0].phys_addr = 0x20300000;
	of_sprd_default_bus_lookup[1].phys_addr = 0x20400000;
	of_sprd_default_bus_lookup[2].phys_addr = 0x20500000;
	of_sprd_default_bus_lookup[3].phys_addr = 0x20600000;
	of_platform_populate(NULL, of_sprd_default_bus_match_table, of_sprd_default_bus_lookup, NULL);
}

Esempio n. 4

File: board.c Progetto: abgoyal/alcatel_ot_4020D_kernel

static void __init sc8825_init_machine(void)
{
#ifdef CONFIG_ANDROID_RAM_CONSOLE
	sprd_ramconsole_init();
#endif
	sci_adc_init((void __iomem *)ADC_BASE);
	sc8825_regulator_init();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
}

Esempio n. 5

File: board-sp8730seea.c Progetto: TechTex198/SM-G318H-Kernel-Source

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#ifndef CONFIG_OF
    #if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_ion_addr_param(void);
	    init_ion_addr_param();
	}
    #endif
    #if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_pstore_addr_param(void);
	    init_pstore_addr_param();
	}
    #endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_serial_device3,(const void*)&plat_data3,sizeof(plat_data3));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
#if(defined(CONFIG_BACKLIGHT_SPRD_PWM)||defined(CONFIG_BACKLIGHT_SPRD_PWM_MODULE))
	platform_device_add_data(&sprd_pwm_bl_device, (const void*)&sprd_pwm_bl_platform_data, sizeof(sprd_pwm_bl_platform_data));
#endif
#if(defined(CONFIG_INPUT_HEADSET_SPRD_SC2723)||defined(CONFIG_INPUT_HEADSET_SPRD_SC2723_MODULE))
	platform_device_add_data(&headset_sprd_sc2723_device, (const void*)&headset_sprd_sc2723_pdata, sizeof(headset_sprd_sc2723_pdata));
#endif
#if(defined(CONFIG_SPRD_KPLED_2723) || defined(CONFIG_SPRD_KPLED_2723_MODULE))
	platform_device_add_data(&sprd_kpled_2723_device, (const void*)&sprd_kpled_2723_pdata, sizeof(sprd_kpled_2723_pdata));
#endif
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
#else
	of_platform_populate(NULL, of_sprd_default_bus_match_table, of_sprd_default_bus_lookup, NULL);
#endif
	//sprd_sr2351_vddwpa_ctrl_power_register();
}

Esempio n. 6

File: board-teddy3g-audio.c Progetto: AnDrOiiiD/android_kernel_samsung_kanas3gxx

void teddy3g_audio_init(void)
{
	sci_adc_init((void __iomem *)ADC_BASE);

	platform_device_add_data(&sprd_audio_i2s0_device,
			(const void *)&i2s0_config, sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,
			(const void *)&i2s1_config, sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,
			(const void *)&i2s2_config, sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,
			(const void *)&i2s3_config, sizeof(i2s3_config));

	/* headset init */
	teddy3g_add_misc_audio_devices();

	if (platform_device_register(&sprd_headset_device) < 0)
		pr_err("%s: fail to register audio headset device\n", __func__);
}

Esempio n. 7

File: board-tsharkwsamsung.c Progetto: Equalizer48/android_kernel_samsung_j13g

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#ifndef CONFIG_OF
#if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
		extern void init_ion_addr_param(void);
		init_ion_addr_param();
	}
#endif
#if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
		extern void init_pstore_addr_param(void);
		init_pstore_addr_param();
	}
#endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
#else
	of_platform_populate(NULL, of_sprd_default_bus_match_table, of_sprd_default_bus_lookup, NULL);
#endif

	sec_class = class_create(THIS_MODULE, "sec");
	if (IS_ERR(sec_class)) {
		pr_err("Failed to create class(sec)!\n");
		printk("Failed create class \n");
		return PTR_ERR(sec_class);
	}
}

Esempio n. 8

File: board-sp5735ea.c Progetto: AnDrOiiiD/android_kernel_samsung_kanas3gxx

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
	sprd_spi_init();
}

Esempio n. 9

File: board-coreprimelite.c Progetto: Eyeless95/samsung_g531h_kernel

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n", __sci_get_chip_id());

	sci_adc_init();
#ifndef CONFIG_MACH_SPX35LFPGA
	sci_regulator_init();
#endif
	of_sprd_default_bus_lookup[0].phys_addr = 0x20300000;
	of_sprd_default_bus_lookup[1].phys_addr = 0x20400000;
	of_sprd_default_bus_lookup[2].phys_addr = 0x20500000;
	of_sprd_default_bus_lookup[3].phys_addr = 0x20600000;
	of_platform_populate(NULL, of_sprd_default_bus_match_table, of_sprd_default_bus_lookup, NULL);
	sec_class = class_create(THIS_MODULE, "sec");
	if (IS_ERR(sec_class)) {
		pr_err("Failed to create class(sec)!\n");
		printk("Failed create class \n");
		return PTR_ERR(sec_class);
	}
}

Esempio n. 10

File: board-kanas_td.c Progetto: Equalizer48/android_kernel_samsung_j13g

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

	sci_adc_init((void __iomem *)ADC_BASE);
	sci_regulator_init();
#if defined(CONFIG_ION) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
	    extern void init_ion_addr_param(void);
	    init_ion_addr_param();
	}
#endif
#if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{ 
	    extern void init_pstore_addr_param(void);
	    init_pstore_addr_param();
	}
#endif
	sprd_add_otg_device();
	platform_device_add_data(&sprd_serial_device0,(const void*)&plat_data0,sizeof(plat_data0));
	platform_device_add_data(&sprd_serial_device1,(const void*)&plat_data1,sizeof(plat_data1));
	platform_device_add_data(&sprd_serial_device2,(const void*)&plat_data2,sizeof(plat_data2));
	platform_device_add_data(&sprd_serial_device3,(const void*)&plat_data3,sizeof(plat_data3));
	platform_device_add_data(&sprd_audio_i2s0_device,(const void*)&i2s0_config,sizeof(i2s0_config));
	platform_device_add_data(&sprd_audio_i2s1_device,(const void*)&i2s1_config,sizeof(i2s1_config));
	platform_device_add_data(&sprd_audio_i2s2_device,(const void*)&i2s2_config,sizeof(i2s2_config));
	platform_device_add_data(&sprd_audio_i2s3_device,(const void*)&i2s3_config,sizeof(i2s3_config));
	platform_device_add_data(&sprd_keypad_device,(const void*)&sci_keypad_data,sizeof(sci_keypad_data));
	platform_device_add_data(&sprd_backlight_device,&ktd253b_data,sizeof(ktd253b_data));

// GPS for marvell
#ifdef CONFIG_PROC_FS
	/* create proc for gps GPS control */
	create_sirf_proc_file();
#endif
// GPS for marvell

	platform_add_devices(devices, ARRAY_SIZE(devices));
	sc8810_add_i2c_devices();
	sc8810_add_misc_devices();
}

Esempio n. 11

File: mach-scx35-dt.c Progetto: Eyeless95/samsung_g531h_kernel

static void __init sc8830_init_machine(void)
{
	printk("sci get chip id = 0x%x\n",__sci_get_chip_id());

#ifdef CONFIG_PROC_AVC
	sec_avc_log_init();
#endif

	sci_adc_init();
	sci_regulator_init();
#if defined(CONFIG_PSTORE_RAM) && defined(SPRD_ION_BASE_USE_VARIABLE)
	{
		extern void init_pstore_addr_param(void);
		init_pstore_addr_param();
	}
#endif
	of_platform_populate(NULL, of_sprd_default_bus_match_table, of_sprd_default_bus_lookup, NULL);
	sec_class = class_create(THIS_MODULE, "sec");
        if (IS_ERR(sec_class)) {
		pr_err("Failed to create class(sec)!\n");
		printk("Failed create class \n");
		return PTR_ERR(sec_class);
	}
}