/**@brief Function for application main entry, does not return.
*
* @details The main function will do all necessary initalization. This includes sdm rx module
* and softdevice.
*/
int main(void)
{
uint32_t err_code;
// In case of logging enabled, we enable sdm_rx module first.
err_code = sdm_rx_init();
APP_ERROR_CHECK(err_code);
// Enable softdevice.
err_code = sd_softdevice_enable(NRF_CLOCK_LFCLKSRC_XTAL_50_PPM, softdevice_assert_callback);
APP_ERROR_CHECK(err_code);
// Set application IRQ to lowest priority.
err_code = sd_nvic_SetPriority(PROTOCOL_EVENT_IRQn, NRF_APP_PRIORITY_LOW);
APP_ERROR_CHECK(err_code);
// Enable application IRQ (triggered from protocol).
err_code = sd_nvic_EnableIRQ(PROTOCOL_EVENT_IRQn);
APP_ERROR_CHECK(err_code);
// Setup Channel_0 as a SDM RX.
ant_channel_sdm_rx_setup();
sdm_main_loop();
}
/**@brief Function for application main entry, does not return.
*
* @details The main function will do all necessary initalization. This includes sdm rx module
* and SoftDevice.
*/
int main(void)
{
uint32_t err_code;
#if defined(TRACE_UART)
app_uart_comm_params_t comm_params =
{
RX_PIN_NUMBER,
TX_PIN_NUMBER,
RTS_PIN_NUMBER,
CTS_PIN_NUMBER,
APP_UART_FLOW_CONTROL_DISABLED,
false,
UART_BAUDRATE_BAUDRATE_Baud38400
};
APP_UART_FIFO_INIT(&comm_params,
UART_RX_BUF_SIZE,
UART_TX_BUF_SIZE,
uart_error_handle,
APP_IRQ_PRIORITY_LOW,
err_code);
APP_ERROR_CHECK(err_code);
#endif // TRACE_UART
#if defined(TRACE_GPIO)
// Initialize timer module.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, false);
err_code = bsp_init(BSP_INIT_LED, APP_TIMER_TICKS(100, APP_TIMER_PRESCALER), NULL);
APP_ERROR_CHECK(err_code);
#endif // TRACE_GPIO
// In case of logging enabled, we enable sdm_rx module first.
err_code = sdm_rx_init();
APP_ERROR_CHECK(err_code);
// Enable SoftDevice.
err_code = sd_softdevice_enable(NRF_CLOCK_LFCLKSRC_XTAL_50_PPM, softdevice_assert_callback);
APP_ERROR_CHECK(err_code);
// Set application IRQ to lowest priority.
err_code = sd_nvic_SetPriority(SD_EVT_IRQn, NRF_APP_PRIORITY_LOW);
APP_ERROR_CHECK(err_code);
// Enable application IRQ (triggered from protocol).
err_code = sd_nvic_EnableIRQ(SD_EVT_IRQn);
APP_ERROR_CHECK(err_code);
err_code = ant_stack_static_config();
APP_ERROR_CHECK(err_code);
// Setup Channel_0 as a SDM RX.
ant_channel_sdm_rx_setup();
sdm_main_loop();
}