Esempi in C++ (Cpp) per seaboard_common_init

Esempio n. 1

static void __init tegra_wario_init(void)
{
	struct clk *c, *p;

	tegra_init_suspend(&seaboard_suspend);

	__init_debug_uart_B();

	seaboard_kbc_platform_data.keymap_data = &cros_keymap_data;

	seaboard_common_init();

	/* wario has same memory config as seaboard */
	seaboard_emc_init();

	/* Temporary hack to keep eMMC controller at 24MHz */
	c = tegra_get_clock_by_name("sdmmc4");
	p = tegra_get_clock_by_name("pll_p");
	if (c && p) {
		clk_set_parent(c, p);
		clk_set_rate(c, 24000000);
		clk_enable(c);
	}

	wario_i2c_register_devices();
	seaboard_i2c_init();
}

Esempio n. 2

File: board-seaboard.c Progetto: 0709oNEY/at100-kernel

static void __init tegra_wario_init(void)
{
	/* Wario uses UARTB for the debug port. */
	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
	debug_uart_platform_data[0].irq = INT_UARTB;

	seaboard_common_init();

	seaboard_i2c_init();
}

Esempio n. 3

File: board-seaboard.c Progetto: Klozz/Grouper-3.4

static void __init tegra_seaboard_init(void)
{
	/* Seaboard uses UARTD for the debug port. */
	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
	debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
	debug_uart_platform_data[0].irq = INT_UARTD;
	tegra_soc_device_init("seaboard");
	seaboard_common_init();

	seaboard_i2c_init();
}

Esempio n. 4

File: board-seaboard.c Progetto: Blackburn29/PsycoKernel

static void __init tegra_seaboard_init(void)
{
	
	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTD_BASE);
	debug_uart_platform_data[0].mapbase = TEGRA_UARTD_BASE;
	debug_uart_platform_data[0].irq = INT_UARTD;

	seaboard_common_init();

	seaboard_i2c_init();
}

Esempio n. 5

static void __init tegra_arthur_init(void)
{
	tegra_init_suspend(&seaboard_suspend);

	__init_debug_uart_B();

	seaboard_kbc_platform_data.keymap_data = &cros_keymap_data;

	seaboard_common_init();

	arthur_i2c_register_devices();
	seaboard_i2c_init();
}

Esempio n. 6

File: board-seaboard.c Progetto: Klozz/Grouper-3.4

static void __init tegra_kaen_init(void)
{
	/* Kaen uses UARTB for the debug port. */
	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
	debug_uart_platform_data[0].irq = INT_UARTB;

	seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
	tegra_soc_device_init("kaen");
	seaboard_common_init();

	seaboard_i2c_init();
}

Esempio n. 7

File: board-seaboard.c Progetto: Blackburn29/PsycoKernel

static void __init tegra_kaen_init(void)
{
	
	debug_uart_platform_data[0].membase = IO_ADDRESS(TEGRA_UARTB_BASE);
	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
	debug_uart_platform_data[0].irq = INT_UARTB;

	seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
	tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);

	seaboard_common_init();

	seaboard_i2c_init();
}

Esempio n. 8

static void __init tegra_seaboard_init(void)
{
	tegra_init_suspend(&seaboard_suspend);

	__init_debug_uart_D();

	seaboard_common_init();

	seaboard_emc_init();

	seaboard_i2c_register_devices();
	seaboard_i2c_init();

	seaboard_sensors_init();
}