int main(int argc, char **argv)
{
// Initialize Aria and Arnl global information
Aria::init();
Arnl::init();
// The robot object
ArRobot robot;
// Parse the command line arguments.
ArArgumentParser parser(&argc, argv);
// Set up our simpleConnector, to connect to the robot and laser
//ArSimpleConnector simpleConnector(&parser);
ArRobotConnector robotConnector(&parser, &robot);
// Connect to the robot
if (!robotConnector.connectRobot())
{
ArLog::log(ArLog::Normal, "Error: Could not connect to robot... exiting");
Aria::exit(3);
}
// Set up where we'll look for files. Arnl::init() set Aria's default
// directory to Arnl's default directory; addDirectories() appends this
// "examples" directory.
char fileDir[1024];
ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(),
"examples");
// To direct log messages to a file, or to change the log level, use these calls:
//ArLog::init(ArLog::File, ArLog::Normal, "log.txt", true, true);
//ArLog::init(ArLog::File, ArLog::Verbose);
// Add a section to the configuration to change ArLog parameters
ArLog::addToConfig(Aria::getConfig());
// set up a gyro (if the robot is older and its firmware does not
// automatically incorporate gyro corrections, then this object will do it)
ArAnalogGyro gyro(&robot);
// Our networking server
ArServerBase server;
// Set up our simpleOpener, used to set up the networking server
ArServerSimpleOpener simpleOpener(&parser);
// the laser connector
ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
// Tell the laser connector to always connect the first laser since
// this program always requires a laser.
parser.addDefaultArgument("-connectLaser");
// Load default arguments for this computer (from /etc/Aria.args, environment
// variables, and other places)
parser.loadDefaultArguments();
// Parse arguments
if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
{
logOptions(argv[0]);
Aria::exit(1);
}
// This causes Aria::exit(9) to be called if the robot unexpectedly
// disconnects
ArGlobalFunctor1<int> shutdownFunctor(&Aria::exit, 9);
robot.addDisconnectOnErrorCB(&shutdownFunctor);
// Create an ArSonarDevice object (ArRangeDevice subclass) and
// connect it to the robot.
ArSonarDevice sonarDev;
robot.addRangeDevice(&sonarDev);
// This object will allow robot's movement parameters to be changed through
// a Robot Configuration section in the ArConfig global configuration facility.
ArRobotConfig robotConfig(&robot);
// Include gyro configuration options in the robot configuration section.
robotConfig.addAnalogGyro(&gyro);
// Start the robot thread.
robot.runAsync(true);
// connect the laser(s) if it was requested, this adds them to the
// robot too, and starts them running in their own threads
if (!laserConnector.connectLasers())
{
ArLog::log(ArLog::Normal, "Could not connect to all lasers... exiting\n");
Aria::exit(2);
}
// find the laser we should use for localization and/or mapping,
// which will be the first laser
robot.lock();
ArLaser *firstLaser = robot.findLaser(1);
if (firstLaser == NULL || !firstLaser->isConnected())
{
ArLog::log(ArLog::Normal, "Did not have laser 1 or it is not connected, cannot start localization and/or mapping... exiting");
Aria::exit(2);
}
robot.unlock();
/* Create and set up map object */
// Set up the map object, this will look for files in the examples
// directory (unless the file name starts with a /, \, or .
// You can take out the 'fileDir' argument to look in the program's current directory
// instead.
// When a configuration file is loaded into ArConfig later, if it specifies a
// map file, then that file will be loaded as the map.
ArMap map(fileDir);
// set it up to ignore empty file names (otherwise if a configuration omits
// the map file, the whole configuration change will fail)
map.setIgnoreEmptyFileName(true);
// ignore the case, so that if someone is using MobileEyes or
// MobilePlanner from Windows and changes the case on a map name,
// it will still work.
map.setIgnoreCase(true);
/* Create localization and path planning threads */
ArPathPlanningTask pathTask(&robot, &sonarDev, &map);
ArLog::log(ArLog::Normal, "Creating laser localization task");
// Laser Monte-Carlo Localization
ArLocalizationTask locTask(&robot, firstLaser, &map);
// Set some options on each laser that the laser connector
// connected to.
std::map<int, ArLaser *>::iterator laserIt;
for (laserIt = robot.getLaserMap()->begin();
laserIt != robot.getLaserMap()->end();
laserIt++)
{
int laserNum = (*laserIt).first;
ArLaser *laser = (*laserIt).second;
// Skip lasers that aren't connected
if(!laser->isConnected())
continue;
// add the disconnectOnError CB to shut things down if the laser
// connection is lost
laser->addDisconnectOnErrorCB(&shutdownFunctor);
// set the number of cumulative readings the laser will take
laser->setCumulativeBufferSize(200);
// add the lasers to the path planning task
pathTask.addRangeDevice(laser, ArPathPlanningTask::BOTH);
// set the cumulative clean offset (so that they don't all fire at once)
laser->setCumulativeCleanOffset(laserNum * 100);
// reset the cumulative clean time (to make the new offset take effect)
laser->resetLastCumulativeCleanTime();
// Add the packet count to the Aria info strings (It will be included in
// MobileEyes custom details so you can monitor whether the laser data is
// being received correctly)
std::string laserPacketCountName;
laserPacketCountName = laser->getName();
laserPacketCountName += " Packet Count";
Aria::getInfoGroup()->addStringInt(
laserPacketCountName.c_str(), 10,
new ArRetFunctorC<int, ArLaser>(laser,
&ArLaser::getReadingCount));
}
// Used for optional multirobot features (see below) (TODO move to multirobot
// example?)
ArClientSwitchManager clientSwitch(&server, &parser);
/* Start the server */
// Open the networking server
if (!simpleOpener.open(&server, fileDir, 240))
{
ArLog::log(ArLog::Normal, "Error: Could not open server.");
exit(2);
}
/* Create various services that provide network access to clients (such as
* MobileEyes), as well as add various additional features to ARNL */
// ARNL can optionally get information about the positions of other robots from a
// "central server" (see central server example program), if command
// line options specifying the address of the central server was given.
// If there is no central server, then the address of each other robot
// can instead be given in the configuration, and the multirobot systems
// will connect to each robot (or "peer") individually.
// TODO move this to multirobot example?
bool usingCentralServer = false;
if(clientSwitch.getCentralServerHostName() != NULL)
usingCentralServer = true;
// if we're using the central server then we want to create the
// multiRobot central classes
if (usingCentralServer)
{
// Make the handler for multi robot information (this sends the
// information to the central server)
//ArServerHandlerMultiRobot *handlerMultiRobot =
new ArServerHandlerMultiRobot(&server, &robot,
&pathTask,
&locTask, &map);
// Normally each robot, and the central server, must all have
// the same map name for the central server to share robot
// information. (i.e. they are operating in the same space).
// This changes the map name that ArServerHandlerMutliRobot
// reports to the central server, in case you want this individual
// robot to load a different map file name, but still report
// the common map file to the central server.
//handlerMultiRobot->overrideMapName("central.map");
// the range device that gets the multi robot information from
// the central server and presents it as virtual range readings
// to ARNL
ArMultiRobotRangeDevice *multiRobotRangeDevice = new ArMultiRobotRangeDevice(&server);
robot.addRangeDevice(multiRobotRangeDevice);
pathTask.addRangeDevice(multiRobotRangeDevice,
ArPathPlanningTask::BOTH);
// Set up options for drawing multirobot information in MobileEyes.
multiRobotRangeDevice->setCurrentDrawingData(
new ArDrawingData("polyDots", ArColor(125, 125, 0),
100, 73, 1000), true);
multiRobotRangeDevice->setCumulativeDrawingData(
new ArDrawingData("polyDots", ArColor(125, 0, 125),
100, 72, 1000), true);
// This sets up the localization to use the known poses of other robots
// for its localization in cases where numerous robots crowd out the map.
locTask.setMultiRobotCallback(multiRobotRangeDevice->getOtherRobotsCB());
}
// if we're not using a central server then create the multirobot peer classes
else
{
// set the path planning so it uses the explicit collision range for how far its planning
pathTask.setUseCollisionRangeForPlanningFlag(true);
// make our thing that gathers information from the other servers
ArServerHandlerMultiRobotPeer *multiRobotPeer = NULL;
ArMultiRobotPeerRangeDevice *multiRobotPeerRangeDevice = NULL;
multiRobotPeerRangeDevice = new ArMultiRobotPeerRangeDevice(&map);
// make our thing that sends information to the other servers
multiRobotPeer = new ArServerHandlerMultiRobotPeer(&server, &robot,
&pathTask, &locTask);
// hook the two together so they both know what priority this robot is
multiRobotPeer->setNewPrecedenceCallback(
multiRobotPeerRangeDevice->getSetPrecedenceCallback());
// hook the two together so they both know what priority this
// robot's fingerprint is
multiRobotPeer->setNewFingerprintCallback(
multiRobotPeerRangeDevice->getSetFingerprintCallback());
// hook the two together so that the range device can call on the
// server handler to change its fingerprint
multiRobotPeerRangeDevice->setChangeFingerprintCB(
multiRobotPeer->getChangeFingerprintCB());
// then add the robot to the places it needs to be
robot.addRangeDevice(multiRobotPeerRangeDevice);
pathTask.addRangeDevice(multiRobotPeerRangeDevice,
ArPathPlanningTask::BOTH);
// Set the range device so that we can see the information its using
// to avoid, you can comment these out in order to not see them
multiRobotPeerRangeDevice->setCurrentDrawingData(
new ArDrawingData("polyDots", ArColor(125, 125, 0),
100, 72, 1000), true);
multiRobotPeerRangeDevice->setCumulativeDrawingData(
new ArDrawingData("polyDots", ArColor(125, 0, 125),
100, 72, 1000), true);
// This sets up the localization to use the known poses of other robots
// for its localization in cases where numerous robots crowd out the map.
locTask.setMultiRobotCallback(
multiRobotPeerRangeDevice->getOtherRobotsCB());
}
/* Add additional range devices to the robot and path planning task (so it
avoids obstacles detected by these devices) */
// Add IR range device to robot and path planning task (so it avoids obstacles
// detected by this device)
robot.lock();
ArIRs irs;
robot.addRangeDevice(&irs);
pathTask.addRangeDevice(&irs, ArPathPlanningTask::CURRENT);
// Add bumpers range device to robot and path planning task (so it avoids obstacles
// detected by this device)
ArBumpers bumpers;
robot.addRangeDevice(&bumpers);
pathTask.addRangeDevice(&bumpers, ArPathPlanningTask::CURRENT);
// Add range device which uses forbidden regions given in the map to give virtual
// range device readings to ARNL. (so it avoids obstacles
// detected by this device)
ArForbiddenRangeDevice forbidden(&map);
robot.addRangeDevice(&forbidden);
pathTask.addRangeDevice(&forbidden, ArPathPlanningTask::CURRENT);
robot.unlock();
// Action to slow down robot when localization score drops but not lost.
ArActionSlowDownWhenNotCertain actionSlowDown(&locTask);
pathTask.getPathPlanActionGroup()->addAction(&actionSlowDown, 140);
// Action to stop the robot when localization is "lost" (score too low)
ArActionLost actionLostPath(&locTask, &pathTask);
pathTask.getPathPlanActionGroup()->addAction(&actionLostPath, 150);
// Arnl uses this object when it must replan its path because its
// path is completely blocked. It will use an older history of sensor
// readings to replan this new path. This should not be used with SONARNL
// since sonar readings are not accurate enough and may prevent the robot
// from planning through space that is actually clear.
ArGlobalReplanningRangeDevice replanDev(&pathTask);
// Service to provide drawings of data in the map display :
ArServerInfoDrawings drawings(&server);
drawings.addRobotsRangeDevices(&robot);
drawings.addRangeDevice(&replanDev);
/* Draw a box around the local path planning area use this
(You can enable this particular drawing from custom commands
which is set up down below in ArServerInfoPath) */
ArDrawingData drawingDataP("polyLine", ArColor(200,200,200), 1, 75);
ArFunctor2C<ArPathPlanningTask, ArServerClient *, ArNetPacket *>
drawingFunctorP(&pathTask, &ArPathPlanningTask::drawSearchRectangle);
drawings.addDrawing(&drawingDataP, "Local Plan Area", &drawingFunctorP);
/* Show the sample points used by MCL */
ArDrawingData drawingDataL("polyDots", ArColor(0,255,0), 100, 75);
ArFunctor2C<ArLocalizationTask, ArServerClient *, ArNetPacket *>
drawingFunctorL(&locTask, &ArLocalizationTask::drawRangePoints);
drawings.addDrawing(&drawingDataL, "Localization Points", &drawingFunctorL);
// "Custom" commands. You can add your own custom commands here, they will
// be available in MobileEyes' custom commands (enable in the toolbar or
// access through Robot Tools)
ArServerHandlerCommands commands(&server);
// These provide various kinds of information to the client:
ArServerInfoRobot serverInfoRobot(&server, &robot);
ArServerInfoSensor serverInfoSensor(&server, &robot);
ArServerInfoPath serverInfoPath(&server, &robot, &pathTask);
serverInfoPath.addSearchRectangleDrawing(&drawings);
serverInfoPath.addControlCommands(&commands);
// Provides localization info and allows the client (MobileEyes) to relocalize at a given
// pose:
ArServerInfoLocalization serverInfoLocalization(&server, &robot, &locTask);
ArServerHandlerLocalization serverLocHandler(&server, &robot, &locTask);
// If you're using MobileSim, ArServerHandlerLocalization sends it a command
// to move the robot's true pose if you manually do a localization through
// MobileEyes. To disable that behavior, use this constructor call instead:
// ArServerHandlerLocalization serverLocHandler(&server, &robot, true, false);
// The fifth argument determines whether to send the command to MobileSim.
// Provide the map to the client (and related controls):
ArServerHandlerMap serverMap(&server, &map);
// These objects add some simple (custom) commands to 'commands' for testing and debugging:
ArServerSimpleComUC uCCommands(&commands, &robot); // Send any command to the microcontroller
ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // configure logging
ArServerSimpleComLogRobotConfig configCommands(&commands, &robot); // trigger logging of the robot config parameters
// ArServerSimpleServerCommands serverCommands(&commands, &server); // monitor networking behavior (track packets sent etc.)
// service that allows the client to monitor the communication link status
// between the robot and the client.
//
ArServerHandlerCommMonitor handlerCommMonitor(&server);
// service that allows client to change configuration parameters in ArConfig
ArServerHandlerConfig handlerConfig(&server, Aria::getConfig(),
Arnl::getTypicalDefaultParamFileName(),
Aria::getDirectory());
/* Set up the possible modes for remote control from a client such as
* MobileEyes:
*/
// Mode To go to a goal or other specific point:
ArServerModeGoto modeGoto(&server, &robot, &pathTask, &map,
locTask.getRobotHome(),
locTask.getRobotHomeCallback());
// Mode To stop and remain stopped:
ArServerModeStop modeStop(&server, &robot);
// Cause the sonar to turn off automatically
// when the robot is stopped, and turn it back on when commands to move
// are sent. (Note, if using SONARNL to localize, then don't do this
// since localization may get lost)
ArSonarAutoDisabler sonarAutoDisabler(&robot);
// Teleoperation modes To drive by keyboard, joystick, etc:
ArServerModeRatioDrive modeRatioDrive(&server, &robot);
// ArServerModeDrive modeDrive(&server, &robot); // Older mode for compatability
// Prevent normal teleoperation driving if localization is lost using
// a high-priority action, which enables itself when the particular mode is
// active.
// (You have to enter unsafe drive mode to drive when lost.)
ArActionLost actionLostRatioDrive(&locTask, &pathTask, &modeRatioDrive);
modeRatioDrive.getActionGroup()->addAction(&actionLostRatioDrive, 110);
// Add drive mode section to the configuration, and also some custom (simple) commands:
modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings");
modeRatioDrive.addControlCommands(&commands);
// Wander mode (also prevent wandering if lost):
ArServerModeWander modeWander(&server, &robot);
ArActionLost actionLostWander(&locTask, &pathTask, &modeWander);
modeWander.getActionGroup()->addAction(&actionLostWander, 110);
// This provides a small table of interesting information for the client
// to display to the operator. You can add your own callbacks to show any
// data you want.
ArServerInfoStrings stringInfo(&server);
Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
// Provide a set of informational data (turn on in MobileEyes with
// View->Custom Details)
Aria::getInfoGroup()->addStringInt(
"Motor Packet Count", 10,
new ArConstRetFunctorC<int, ArRobot>(&robot,
&ArRobot::getMotorPacCount));
Aria::getInfoGroup()->addStringDouble(
"Laser Localization Score", 8,
new ArRetFunctorC<double, ArLocalizationTask>(
&locTask, &ArLocalizationTask::getLocalizationScore),
"%.03f");
Aria::getInfoGroup()->addStringInt(
"Laser Loc Num Samples", 8,
new ArRetFunctorC<int, ArLocalizationTask>(
&locTask, &ArLocalizationTask::getCurrentNumSamples),
"%4d");
// Display gyro status if gyro is enabled and is being handled by the firmware (gyro types 2, 3, or 4).
// (If the firmware detects an error communicating with the gyro or IMU it
// returns a flag, and stops using it.)
// (This gyro type parameter, and fault flag, are only in ARCOS, not Seekur firmware)
if(robot.getOrigRobotConfig() && robot.getOrigRobotConfig()->getGyroType() > 1)
{
Aria::getInfoGroup()->addStringString(
"Gyro/IMU Status", 10,
new ArGlobalRetFunctor1<const char*, ArRobot*>(&getGyroStatusString, &robot)
);
}
// Setup the dock if there is a docking system on board.
ArServerModeDock *modeDock = NULL;
modeDock = ArServerModeDock::createDock(&server, &robot, &locTask,
&pathTask);
if (modeDock != NULL)
{
modeDock->checkDock();
modeDock->addAsDefaultMode();
modeDock->addToConfig(Aria::getConfig());
modeDock->addControlCommands(&commands);
}
// Make Stop mode the default (If current mode deactivates without entering
// a new mode, then Stop Mode will be selected)
modeStop.addAsDefaultMode();
// TODO move up near where stop mode is created?
/* Services that allow the client to initiate scanning with the laser to
create maps in Mapper3 (So not possible with SONARNL): */
ArServerHandlerMapping handlerMapping(&server, &robot, firstLaser,
fileDir, "", true);
// make laser localization stop while mapping
handlerMapping.addMappingStartCallback(
new ArFunctor1C<ArLocalizationTask, bool>
(&locTask, &ArLocalizationTask::setIdleFlag, true));
// and then make it start again when we're doine
handlerMapping.addMappingEndCallback(
new ArFunctor1C<ArLocalizationTask, bool>
(&locTask, &ArLocalizationTask::setIdleFlag, false));
// Make it so our "lost" actions don't stop us while mapping
handlerMapping.addMappingStartCallback(actionLostPath.getDisableCB());
handlerMapping.addMappingStartCallback(actionLostRatioDrive.getDisableCB());
handlerMapping.addMappingStartCallback(actionLostWander.getDisableCB());
// And then let them make us stop as usual when done mapping
handlerMapping.addMappingEndCallback(actionLostPath.getEnableCB());
handlerMapping.addMappingEndCallback(actionLostRatioDrive.getEnableCB());
handlerMapping.addMappingEndCallback(actionLostWander.getEnableCB());
// don't let forbidden lines show up as obstacles while mapping
// (they'll just interfere with driving while mapping, and localization is off anyway)
handlerMapping.addMappingStartCallback(forbidden.getDisableCB());
// let forbidden lines show up as obstacles again as usual after mapping
handlerMapping.addMappingEndCallback(forbidden.getEnableCB());
/*
// If we are on a simulator, move the robot back to its starting position,
// and reset its odometry.
// This will allow localizeRobotAtHomeBlocking() below will (probably) work (it
// tries current odometry (which will be 0,0,0) and all the map
// home points.
// (Ignored by a real robot)
//robot.com(ArCommands::SIM_RESET);
*/
// create a pose storage class, this will let the program keep track
// of where the robot is between runs... after we try and restore
// from this file it will start saving the robot's pose into the
// file
ArPoseStorage poseStorage(&robot);
/// if we could restore the pose from then set the sim there (this
/// won't do anything to the real robot)... if we couldn't restore
/// the pose then just reset the position of the robot (which again
/// won't do anything to the real robot)
if (poseStorage.restorePose("robotPose"))
serverLocHandler.setSimPose(robot.getPose());
else
robot.com(ArCommands::SIM_RESET);
/* File transfer services: */
#ifdef WIN32
// Not implemented for Windows yet.
ArLog::log(ArLog::Normal, "Note, file upload/download services are not implemented for Windows; not enabling them.");
#else
// This block will allow you to set up where you get and put files
// to/from, just comment them out if you don't want this to happen
// /*
ArServerFileLister fileLister(&server, fileDir);
ArServerFileToClient fileToClient(&server, fileDir);
ArServerFileFromClient fileFromClient(&server, fileDir, "/tmp");
ArServerDeleteFileOnServer deleteFileOnServer(&server, fileDir);
// */
#endif
/* Video image streaming, and camera controls (Requires SAVserver or ACTS) */
// Forward any video if either ACTS or SAV server are running.
// You can find out more about SAV and ACTS on our website
// http://robots.activmedia.com. ACTS is for color tracking and is
// a seperate product. SAV just does software A/V transmitting and is
// free to all our customers. Just run ACTS or SAV server before you
// start this program and this class here will forward video from the
// server to the client.
ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
// make a camera to use in case we have video. the camera collection collects
// multiple ptz cameras
ArPTZ *camera = NULL;
ArServerHandlerCamera *handlerCamera = NULL;
ArCameraCollection *cameraCollection = NULL;
// if we have video then set up a camera
if (videoForwarder.isForwardingVideo())
{
cameraCollection = new ArCameraCollection();
cameraCollection->addCamera("Cam1", "PTZ", "Camera", "PTZ");
videoForwarder.setCameraName("Cam1");
videoForwarder.addToCameraCollection(*cameraCollection);
camera = new ArVCC4(&robot); //, invertedCamera, ArVCC4::COMM_UNKNOWN, true, true);
// To use an RVision SEE camera instead:
// camera = new ArRVisionPTZ(&robot);
camera->init();
handlerCamera = new ArServerHandlerCamera("Cam1",
&server,
&robot,
camera,
cameraCollection);
pathTask.addGoalFinishedCB(
new ArFunctorC<ArServerHandlerCamera>(
handlerCamera,
&ArServerHandlerCamera::cameraModeLookAtGoalClearGoal));
}
// After all of the cameras / videos have been created and added to the collection,
// then start the collection server.
//
if (cameraCollection != NULL) {
new ArServerHandlerCameraCollection(&server, cameraCollection);
}
/* Load configuration values, map, and begin! */
// When parsing the configuration file, also look at the program's command line options
// from the command-line argument parser as well as the configuration file.
// (So you can use any argument on the command line, namely -map.)
Aria::getConfig()->useArgumentParser(&parser);
puts("xxx");puts("aaa"); fflush(stdout);
// Read in parameter files.
ArLog::log(ArLog::Normal, "Loading config file %s into ArConfig (base directory %s)...", Arnl::getTypicalParamFileName(), Aria::getConfig()->getBaseDirectory());
if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
{
ArLog::log(ArLog::Normal, "Trouble loading configuration file, exiting");
Aria::exit(5);
}
// Warn about unknown params.
if (!simpleOpener.checkAndLog() || !parser.checkHelpAndWarnUnparsed())
{
logOptions(argv[0]);
Aria::exit(6);
}
// Warn if there is no map
if (map.getFileName() == NULL || strlen(map.getFileName()) <= 0)
{
ArLog::log(ArLog::Normal, "");
ArLog::log(ArLog::Normal, "### No map file is set up, you can make a map with the following procedure");
ArLog::log(ArLog::Normal, " 0) You can find this information in README.txt or docs/Mapping.txt");
ArLog::log(ArLog::Normal, " 1) Connect to this server with MobileEyes");
ArLog::log(ArLog::Normal, " 2) Go to Tools->Map Creation->Start Scan");
ArLog::log(ArLog::Normal, " 3) Give the map a name and hit okay");
ArLog::log(ArLog::Normal, " 4) Drive the robot around your space (see docs/Mapping.txt");
ArLog::log(ArLog::Normal, " 5) Go to Tools->Map Creation->Stop Scan");
ArLog::log(ArLog::Normal, " 6) Start up Mapper3");
ArLog::log(ArLog::Normal, " 7) Go to File->Open on Robot");
ArLog::log(ArLog::Normal, " 8) Select the .2d you created");
ArLog::log(ArLog::Normal, " 9) Create a .map");
ArLog::log(ArLog::Normal, " 10) Go to File->Save on Robot");
ArLog::log(ArLog::Normal, " 11) In MobileEyes, go to Tools->Robot Config");
ArLog::log(ArLog::Normal, " 12) Choose the Files section");
ArLog::log(ArLog::Normal, " 13) Enter the path and name of your new .map file for the value of the Map parameter.");
ArLog::log(ArLog::Normal, " 14) Press OK and your new map should become the map used");
ArLog::log(ArLog::Normal, "");
}
// Print a log message notifying user of the directory for map files
ArLog::log(ArLog::Normal, "");
ArLog::log(ArLog::Normal,
"Directory for maps and file serving: %s", fileDir);
ArLog::log(ArLog::Normal, "See the ARNL README.txt for more information");
ArLog::log(ArLog::Normal, "");
// Do an initial localization of the robot. It tries all the home points
// in the map, as well as the robot's current odometric position, as possible
// places the robot is likely to be at startup. If successful, it will
// also save the position it found to be the best localized position as the
// "Home" position, which can be obtained from the localization task (and is
// used by the "Go to home" network request).
locTask.localizeRobotAtHomeBlocking();
// Let the client switch manager (for multirobot) spin off into its own thread
// TODO move to multirobot example?
clientSwitch.runAsync();
// Start the networking server's thread
server.runAsync();
// Add a key handler so that you can exit by pressing
// escape. Note that this key handler, however, prevents this program from
// running in the background (e.g. as a system daemon or run from
// the shell with "&") -- it will lock up trying to read the keys;
// remove this if you wish to be able to run this program in the background.
ArKeyHandler *keyHandler;
if ((keyHandler = Aria::getKeyHandler()) == NULL)
{
keyHandler = new ArKeyHandler;
Aria::setKeyHandler(keyHandler);
robot.lock();
robot.attachKeyHandler(keyHandler);
robot.unlock();
puts("Server running. To exit, press escape.");
}
ArnlASyncTaskExample asyncTaskExample(&pathTask, &robot, &modeGoto, &parser);
// Enable the motors and wait until the robot exits (disconnection, etc.) or this program is
// canceled.
robot.enableMotors();
robot.waitForRunExit();
Aria::exit(0);
}
int
main(int argc, char *argv[])
{
// Initialize location of Aria, Arnl and their args.
Aria::init();
Arnl::init();
// The robot object
ArRobot robot;
#ifndef SONARNL
// The laser object
ArSick sick(181, 361);
#endif
// Parse them command line arguments.
ArArgumentParser parser(&argc, argv);
// Set up our simpleConnector
ArSimpleConnector simpleConnector(&parser);
// Load default arguments for this computer
parser.loadDefaultArguments();
// Parse its arguments for the simple connector.
simpleConnector.parseArgs();
// sonar, must be added to the robot, for teleop and wander
ArSonarDevice sonarDev;
// add the sonar to the robot
robot.addRangeDevice(&sonarDev);
ArMap arMap;
#ifndef SONARNL
// Initialize the localization
ArLocalizationTask locTask(&robot, &sick, &arMap);
// Make the path task
ArPathPlanningTask pathTask(&robot, &sick, &sonarDev, &arMap);
#else
// Initialize the localization
ArSonarLocalizationTask locTask(&robot, &sonarDev, &arMap);
// Make the path task
ArPathPlanningTask pathTask(&robot, NULL, &sonarDev, &arMap);
#endif
// Stop the robot as soon as localization fails.
ArFunctor1C<ArPathPlanningTask, int>
locaFailed(&pathTask, &ArPathPlanningTask::trackingFailed);
locTask.addFailedLocalizationCB(&locaFailed);
// Read in param files.
Aria::getConfig()->useArgumentParser(&parser);
if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
{
printf("Trouble loading configuration file, exiting\n");
exit(1);
}
// Warn about unknown params.
if (!parser.checkHelpAndWarnUnparsed())
{
printf("\nUsage: %s -map mapfilename\n\n", argv[0]);
simpleConnector.logOptions();
exit(2);
}
// Our server
ArServerBase server;
// First open the server up
if (!server.open(7272))
{
printf("Could not open server port\n");
exit(1);
}
// Connect the robot
if (!simpleConnector.connectRobot(&robot))
{
printf("Could not connect to robot... exiting\n");
Aria::shutdown();
return 1;
}
robot.com2Bytes(31, 14, 0);
robot.com2Bytes(31, 15, 0);
ArUtil::sleep(100);
robot.com2Bytes(31, 14, 1);
robot.com2Bytes(31, 15, 1);
robot.enableMotors();
robot.clearDirectMotion();
#ifndef SONARNL
// Set up the laser before handing it to the laser mode
simpleConnector.setupLaser(&sick);
// Add the laser to the robot
robot.addRangeDevice(&sick);
#endif
// Start the robot thread.
robot.runAsync(true);
#ifndef SONARNL
// Start the laser thread.
sick.runAsync();
// Connect the laser
if (!sick.blockingConnect())
{
printf("Couldn't connect to sick, exiting\n");
Aria::shutdown();
return 1;
}
#endif
ArUtil::sleep(300);
// If you want to set the number of samples change the line below
locTask.setNumSamples(2000);
// Localize the robot to home
if(locTask.localizeRobotAtHomeBlocking())
{
printf("Successfully localized at home.\n");
}
else
{
printf("WARNING: Unable to localize at home position!\n");
}
robot.lock();
// attach stuff to the server
ArServerInfoRobot serverInfoRobot(&server, &robot);
ArServerInfoSensor serverInfoSensor(&server, &robot);
ArServerInfoPath serverInfoPath(&server, &robot, &pathTask);
ArServerInfoLocalization serverInfoLocalization(&server, &robot, &locTask);
#ifndef SONARNL
// Set it up to handle maps.
ArServerHandlerMap serverMap(&server, &arMap, ArServerHandlerMap::POINTS);
#else
ArServerHandlerMap serverMap(&server, &arMap, ArServerHandlerMap::LINES);
#endif
// Set up a service that allows the client to monitor the communication
// between the robot and the client.
//
ArServerHandlerCommMonitor serverCommMonitor(&server);
//ArServerModeGoto modeGoto(&server, &robot, &pathTask);
//ArServerModeStop modeStop(&server, &robot);
//ArServerModeDrive modeDrive(&server, &robot);
SimpleTask simpleTask(&robot, &pathTask);
robot.unlock();
// Read in param files.
Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName());
// Now let it spin off in its own thread
server.run();
exit(0);
}
