Cce1600f::Cce1600f(CPObject *parent):CPObject(parent)
{
BackGroundFname = P_RES(":/ext/ce-1600f.png");
setcfgfname(QString("ce1600f"));
setDXmm(95);
setDYmm(120);
setDZmm(39);
setDX(339);
setDY(428);
pKEYB->setMap("ce1600f.map",0);
bus = new CbusPc1500();
error = false;
ready = true;
ChangedDisk = false;
busy = false;
ack = false;
isDisk = true;
writeProtect = false;
motorRunning = false;
sector = 0;
startMotorState = 0;
countWrite = 0;
memset(data,0,sizeof(data));
}
Cfp100::Cfp100(CPObject *parent):Cce515p(this) {
setfrequency( 4000);
ioFreq = 0;
setcfgfname(QString("fp100"));
BackGroundFname = P_RES(":/ext/fp100.png");
delete pKEYB;
pKEYB = new Ckeyb(this,"x710.map");
setDXmm(302);//Pc_DX_mm = 256;
setDYmm(120);//Pc_DY_mm = 185;
setDZmm(36);//Pc_DZ_mm = 42;
setDX(1078);//Pc_DX = 895;
setDY(817);//Pc_DY = 615;
printerACK = false;
printerBUSY = false;
capot = LoadImage(QSize(849,274),P_RES(":/ext/fp100-capot.png"));
head = LoadImage(QSize(79,161),P_RES(":/ext/fp100head.png"));
cable = LoadImage(QSize(75,10),P_RES(":/ext/fp100cable.png"));
margin = 40;
Paper_DX = 960+2*margin;
setPaperPos(QRect(154,26,731,300));
}
Ce500::Ce500(CPObject *parent) : CpcXXXX(parent)
{ //[constructor]
setfrequency( (int) 3072000/3);
setcfgfname(QString("e500"));
SessionHeader = "E500PKM";
Initial_Session_Fname ="e500.pkm";
BackGroundFname = P_RES(":/e500/pc-e500.png");
LcdFname = P_RES(":/e500/e500lcd.png");
SymbFname = P_RES(":/e500/e500symb.png");
memsize = 0x100000;
InitMemValue = 0xff;
/* ROM area(c0000-fffff) S3: */
SlotList.clear();
SlotList.append(CSlot(256, 0x40000 , "" , "" , RAM , "RAM S1"));
SlotList.append(CSlot(256, 0x80000 , "" , "" , RAM , "RAM S2"));
SlotList.append(CSlot(256, 0xC0000 , P_RES(":/e500/s3.rom"), "e500/s3.rom" , ROM , "ROM S3"));
PowerSwitch = 0;
Pc_Offset_X = Pc_Offset_Y = 0;
setDXmm(200);
setDYmm(100);
setDZmm(14);
setDX(715);
setDY(357);
Lcd_X = 69;
Lcd_Y = 99;
Lcd_DX = 240;//168;//144 ;
Lcd_DY = 32;
Lcd_ratio_X = 348.0/240;
Lcd_ratio_Y = 60.0/32;
Lcd_Symb_X = 69;//(int) (45 * 1.18);
Lcd_Symb_Y = 79;//(int) (35 * 1.18);
Lcd_Symb_DX = 348;
Lcd_Symb_DY = 20;
Lcd_Symb_ratio_X = 1;//1.18;
pLCDC = new Clcdc_e500(this);
pCPU = new Csc62015(this);
pTIMER = new Ctimer(this);
pKEYB = new Ckeyb(this,"e500.map");
pHD61102_1 = new CHD61102(this);
pHD61102_2 = new CHD61102(this);
// pRP5C01 = new CRP5C01(this);
start2khz = 0;
start4khz = 0;
Xin=Xout=false;
tmp_state=0;
ioFreq=0;
}
Crlp4002::Crlp4002(CPObject *parent):CPObject(parent)
{ //[constructor]
Q_UNUSED(parent)
setfrequency( 0);
BackGroundFname = P_RES(":/rlh1000/rlp4002.png");
setcfgfname("rlp4002");
pTIMER = new Ctimer(this);
pKEYB->setMap("rlp4002.map");
setDXmm(227);
setDYmm(95);
setDZmm(31);
// Ratio = 3,57
setDX(848);//Pc_DX = 75;
setDY(340);//Pc_DY = 20;
rotate = false;
slotChanged = false;
connected = false;
rts = false;
cts = false;
memsize = 0x2000;
InitMemValue = 0x7f;
SlotList.clear();
SlotList.append(CSlot(8 , 0x0000 , P_RES(":/rlh1000/Telecomputing_2.bin") , "" , CSlot::ROM , "ROM"));
}
Cpc2021::Cpc2021(CPObject *parent):Cprinter(parent)
{ //[constructor]
setfrequency( 0);
pc2021buf = 0;
pc2021display= 0;
//bells = 0;
charTable = 0;
margin = 25;
ToDestroy = false;
BackGroundFname = P_RES(":/ext/pc-2021.png");
setcfgfname("pc2021");
settop(10);
setposX(0);
pTIMER = new Ctimer(this);
KeyMap = KeyMappc2021;
KeyMapLenght= KeyMappc2021Lenght;
pKEYB->setMap("pc2021.map");
setDXmm(108);
setDYmm(130);
setDZmm(43);
setDX(386);
setDY(464);
setPaperPos(QRect(70,-3,275,149));
ctrl_char = false;
t = 0;
c = 0;
rmtSwitch = false;
internal_device_code = 0x0f;
}
Crlh1000::Crlh1000(CPObject *parent) : CpcXXXX(parent)
{ //[constructor]
setfrequency( (int) 4194300/4);
setcfgfname(QString("rlh1000"));
SessionHeader = "RLH1000PKM";
Initial_Session_Fname ="rlh1000.pkm";
BackGroundFname = P_RES(":/rlh1000/rlh1000.png");
LeftFname = P_RES(":/rlh1000/rlh1000Left.png");
// RightFname = P_RES(":/rlh1000/rlh1000Right.png");
BackFname = P_RES(":/rlh1000/rlh1000BackOpen.png");
TopFname = P_RES(":/rlh1000/rlh1000Top.png");
BottomFname = P_RES(":/rlh1000/rlh1000Bottom.png");
backDoorImage = new QImage(QString(P_RES(":/rlh1000/trappe.png")));
memsize = 0x20000;
InitMemValue = 0x7F;
SlotList.clear();
SlotList.append(CSlot(8 , 0x0000 , "" , "" , CSlot::RAM , "RAM"));
SlotList.append(CSlot(8 , 0x2000 , "" , "" , CSlot::ROM , "Ext ROM"));
SlotList.append(CSlot(16, 0x4000 , "" , "" , CSlot::ROM , "ROM Capsules 1"));
SlotList.append(CSlot(16, 0x8000 , "" , "" , CSlot::NOT_USED , "Ext RAM"));
SlotList.append(CSlot(16, 0xC000 , P_RES(":/rlh1000/HHC-rom-C000-FFFF.bin"),"" , CSlot::ROM , "ROM"));
SlotList.append(CSlot(16, 0x10000 , "" , "" , CSlot::ROM , "ROM Capsules 2"));
SlotList.append(CSlot(16, 0x14000 , "" , "" , CSlot::ROM , "ROM Capsules 3"));
// Ratio = 3,57
setDXmm(227);
setDYmm(95);
setDZmm(31);
setDX(811);
setDY(340);
PowerSwitch = 0;
pLCDC = new Clcdc_rlh1000(this,
QRect(205,55,159*2.5,8*3),
QRect());
pCPU = new Cm6502(this); m6502 = (Cm6502*)pCPU;
pTIMER = new Ctimer(this);
pKEYB->setMap("rlh1000.map");
backdoorKeyIndex=0;
capsuleKeyIndex=0;
ioFreq = 0;
extrinsicRAM = 0xff;
extrinsicROM = 0xff;
bus = new CbusPanasonic();
backdoorOpen = false;
backdoorFlipping = false;
m_backdoorAngle = 0;
}
void SS_boomerang::mouseReleaseEvent(QMouseEvent *event)
{
double new_dphi = sqrt((event->globalX() - getPrevMouseX()) * (event->globalX() - getPrevMouseX()) +
(event->globalY() - getPrevMouseY()) * (event->globalY() - getPrevMouseY()));
setDX((event->globalX() - getPrevMouseX()) / 50);
setDY((event->globalY() - getPrevMouseY()) / 50);
setDAngle(new_dphi / 10000);
}
void SS_boomerang::mousePressEvent(QMouseEvent *event)
{
setDAngle(0);
setDX(0);
setDY(0);
setPrevMouseX(event->globalX());
setPrevMouseY(event->globalY());
}
Cpb1000::Cpb1000(CPObject *parent) : CpcXXXX(parent)
{ //[constructor]
setfrequency( (int) 910000/1);
ioFreq = 0;
setcfgfname(QString("pb1000"));
SessionHeader = "PB1000PKM";
Initial_Session_Fname ="pb1000.pkm";
BackGroundFname = P_RES(":/pb1000/pb-1000.png");
back = new QImage(P_RES(":/pb1000/pb1000back.png"));
memsize = 0x20000;
InitMemValue = 0xff;
SlotList.clear();
SlotList.append(CSlot(6 , 0x0000 , P_RES(":/pb1000/rom0.bin") , "" , CSlot::ROM , "CPU ROM"));
SlotList.append(CSlot(8 , 0x6000 , "" , "" , CSlot::RAM , "RAM0"));
SlotList.append(CSlot(32, 0x8000 , P_RES(":/pb1000/rom1.bin") , "" , CSlot::ROM , "ROM"));
SlotList.append(CSlot(32, 0x18000 , "" , "" , CSlot::RAM , "RAM1"));
SlotList.append(CSlot(1 , 0x1800 , "" , "" , CSlot::ROM , "PORT"));
PowerSwitch = 0;
setDXmm(187);
setDYmm(177);
setDZmm(24);
setDX(668);//715);
setDY(633);//465);
PowerSwitch = 0;
pLCDC = new Clcdc_pb1000(this,
QRect(90,130,192*2,32*2),
QRect());
pCPU = new CHD61700(this);
pTIMER = new Ctimer(this);
pKEYB->setMap("pb1000.map");
pHD44352 = new CHD44352(this,P_RES(":/pb1000/chr.bin"));
m_kb_matrix = 0;
// shift=fct = false;
closed = false;
loc_flipping = false;
loc_m_angle = 180;
loc_m_zoom = 1;
writeIO = false;
adrBus = 0;
}
Cce515p::Cce515p(CPObject *parent):Cprinter(parent)
{
//[constructor]
BackGroundFname = P_RES(":/ext/ce-150.jpg");
PaperFname = "ext/ce-150paper.jpg";
setcfgfname(QString("ce515p"));
Paper_X = 100; Paper_DX = 500;
Paper_Y = 100;
//PaperWidgetRect = QRect(80,46,167,170);
setDX(960);
setDY(320);
//pCONNECTOR = new Cconnector(this,5,"Internal connector 5 pins",true); publish(pCONNECTOR);
pTIMER = new Ctimer(this);
KeyMap = 0;
KeyMapLenght= 0;
pKEYB->setMap("ce150.map");
Print_Mode = 0;
Pen_X = 0;
Pen_Y = 0;
orig_X = 0;
orig_Y = 100;
Pen_Z = 0;
prev_Pen_X = 0;
prev_Pen_Y = 0;
prev_Pen_Z = 0;
Pen_Status = PEN_UP;
Pen_Color = 0;
Rot = 0;
//960,320,388,0)
ce515pbuf=0;
ce515pdisplay=0;
needRedraw = true;
setPaperPos(QRect(75,46,380,170));
#ifndef NO_SOUND
clac = 0;
#endif
StartRot = false;
Change_Color = true;
Sii_wait = 0;
oldstate_run = 0;
printer_oldstate_draw = 0;
printer_oldstate_paperfeed=0;
t=c=0;
waitbitstart=1;
waitbitstop=0;
lastX = 0;
margin = 0;
}
Cce127r::Cce127r(CPObject *parent) : Cce152(parent)
{
BackGroundFname = P_RES(":/ext/ce-127r.png");
setcfgfname("ce127r");
setDXmm(132);//Pc_DX_mm = 135;
setDYmm(74);//Pc_DY_mm = 70;
setDZmm(25);//Pc_DZ_mm = 10;
setDX(472);//Pc_DX = 483;//409;
setDY(266);//Pc_DY = 252;//213;
pKEYB->fn_KeyMap = "ce127r.map";
}
Cpc2081::Cpc2081(CPObject *parent) : Cce152(parent)
{
BackGroundFname = P_RES(":/ext/pc-2081.png");
setcfgfname("pc2081");
setDXmm(184);//Pc_DX_mm = 135;
setDYmm(114);//Pc_DY_mm = 70;
setDZmm(31);//Pc_DZ_mm = 10;
setDX(658);//Pc_DX = 483;//409;
setDY(410);//Pc_DY = 252;//213;
pKEYB->fn_KeyMap = "pc2081.map";
}
SS_boomerang &SS_boomerang::operator =(const SS_boomerang &other)
{
setDX(other.getDX());
setDY(other.getDY());
setDAngle(other.getAngle());
setX(other.getX());
setY(other.getY());
setAngle(other.getAngle());
setHeight(other.getHeight());
setWidth(other.getWidth());
return *this;
}
Crlp6001::Crlp6001(CPObject *parent ) : CPObject(this)
{ //[constructor]
setfrequency( 0);
BackGroundFname = P_RES(":/rlh1000/rlp6001.png");
setDXmm(85);
setDYmm(318);
setDZmm(51);
// Ratio = 3,57
setDX(303);//Pc_DX = 75;
setDY(1035);//Pc_DY = 20;
}
/**
* @brief
*
* @param parent
*/
Cjr800::Cjr800(CPObject *parent) : CpcXXXX(parent)
{ //[constructor]
setfrequency( (int) 4915200/4);
setcfgfname(QString("jr800"));
SessionHeader = "JR800PKM";
Initial_Session_Fname ="jr800.pkm";
BackGroundFname = P_RES(":/jr800/jr800.png");
RightFname = P_RES(":/jr800/jr800Right.png");
LeftFname = P_RES(":/jr800/jr800Left.png");
TopFname = P_RES(":/jr800/jr800Top.png");
// BackFname = P_RES(":/jr800/jr800Back.png");
memsize = 0xFFFF;
InitMemValue = 0xFF;
SlotList.clear();
SlotList.append(CSlot(32 ,0x0000 , "" , "" , CSlot::RAM , "RAM"));
SlotList.append(CSlot(32, 0x8000 , P_RES(":/jr800/rom-8000-FFFF.bin"), "" , CSlot::ROM , "ROM"));
PowerSwitch = 0;
setDXmm(255);
setDYmm(140);
setDZmm(32);
setDX(911);
setDY(501);
PowerSwitch = 0;
pLCDC = new Clcdc_jr800(this,
QRect(98,94,340,115),
QRect(86,94,364,115));
pCPU = new Cmc6800(this);
for (int i=0;i<8;i++) {
hd44102[i] = new CHD44102(this);
hd44102[i]->setObjectName(QString("%1").arg(i));
qWarning()<<hd44102[i];
}
pTIMER = new Ctimer(this);
pKEYB->setMap("jr800.map");
ioFreq = 9600;
}
Cce122::Cce122(CPObject *parent):Cce126(parent)
{ //[constructor]
BackGroundFname = P_RES(":/ext/ce-122.png");
setcfgfname("ce122");
setDX(1002);//Pc_DX = 282;
setDY(330);//Pc_DY = 95;
setDXmm(282);
setDYmm(95);
setPaperPos(QRect(90,0,158,151));
pKEYB->setMap("ce122.map");
setPower(true);
printSwitch = true;
}
Cx710::Cx710(CPObject *parent):Cce515p(parent) {
//setfrequency( 0);
setcfgfname(QString("x710"));
BackGroundFname = P_RES(":/x07/x710.png");
setDXmm(200);
setDYmm(120);
setDZmm(36);
setDX(715);
setDY(665);
setPaperPos(QRect(155,46,400,300));
delete(pKEYB);
pKEYB->setMap("x710.map",0);
}
Csio::Csio(CPObject *parent) : CPObject(parent)
{ //[constructor]
si=so=0; //si,so port access?(0:none, 1:access)
plink=0; //aplinks using?(0:none, 1:using)
plinkmode=0; //select plink client(0:plink, 1:plinkc)
exportbit=0;
exportbyte=1;
convCRLF=1;
currentBit=oldstate_in=0;
Start_Bit_Sent = false;
t=c=0;waitbitstart=1;waitbitstop=waitparity=0;
baudrate = 9600;
ToDestroy = false;
outBitNb = 0;
Sii_ndx = 0;
Sii_wait = 0;
Sii_wait_recv = 0;
Sii_startbitsent = false;
Sii_stopbitsent = true;
Sii_TransferStarted = false;
Sii_TextLength = 0;
Sii_Bit_Nb = 0;
Sii_LfWait = 500;
setfrequency( 0);
ioFreq = 0;
BackGroundFname = P_RES(":/ext/serial.png");
pTIMER = new Ctimer(this);
setDX(195);
setDY(145);
setDXmm(50);
setDYmm(55);
setDZmm(33);
dialogconsole = new DialogConsole(this);
}
Cce152::Cce152(CPObject *parent) : CPObject(parent)
{
// if (parent == 0) pPC = (CPObject *)this;
BackGroundFname = P_RES(":/ext/ce-152.png");
setcfgfname("ce152");
Tapein = 0; //Tape loaded (0:none, other:access)
TapeCounter = 0;
mode = EJECT;
SoundOn = FALSE;
info.ptrFd = 0;
pTIMER = new Ctimer(this);
setDX(200);//Pc_DX = 200;
setDY(320);//Pc_DY = 320;
KeyMap = KeyMapce152;
KeyMapLenght= KeyMapce152Lenght;
pKEYB = new Ckeyb(this,"ce152.map");
first_state = 0;
counter = 0;
GetWav_Val = 0;
previous_state_setwav = 0;
}
Cmd100::Cmd100(CPObject *parent):CPObject(parent)
{ //[constructor]
setfrequency( 0);
BackGroundFname = P_RES(":/md100/md-100.png");
setcfgfname("md100");
pTIMER = new Ctimer(this);
setDX(1203);//Pc_DX = 620;//480;
setDY(779);//Pc_DY = 488;//420;
setDXmm(337);
setDYmm(218);
setDZmm(46);
port = 0x08;
adrBus=prev_adrBus=0;
}
Ccl1000::Ccl1000(CPObject *parent):Cce515p(this) {
setfrequency( 0);
ioFreq = 0;
setcfgfname(QString("cl1000"));
BackGroundFname = P_RES(":/ext/cl-1000.png");
delete pKEYB;
pKEYB = new Ckeyb(this,"cl1000.map");
setDXmm(260);//Pc_DX_mm = 256;
setDYmm(225);//Pc_DY_mm = 185;
setDZmm(42);//Pc_DZ_mm = 42;
setDX(928);//Pc_DX = 895;
setDY(804);//Pc_DY = 615;
printerACK = false;
printerBUSY = false;
margin = 20;
Paper_DX = 240+2*margin;
setPaperPos(QRect(90,0,214,245));
}
Crlp9001::Crlp9001(CPObject *parent ) : CPObject(this)
{ //[constructor]
setfrequency( 0);
BackGroundFname = P_RES(":/rlh1000/rlp9002.png");
setDXmm(113);
setDYmm(95);
setDZmm(51);
// Ratio = 3,57
setDX(403);//Pc_DX = 75;
setDY(340);//Pc_DY = 20;
rotate = false;
memsize = 0x4000;
InitMemValue = 0xff;
SlotList.clear();
SlotList.append(CSlot(16 , 0x0000 , "" , "" , RAM , "RAM 16Ko"));
}
Cce126::Cce126(CPObject *parent):Cprinter(parent)
{ //[constructor]
Q_UNUSED(parent)
setfrequency( 0);
ce126buf = 0;
ce126display= 0;
//bells = 0;
charTable = 0;
margin = 25;
ToDestroy = false;
BackGroundFname = P_RES(":/ext/ce-126p.png");
setcfgfname("ce126p");
settop(10);
setposX(0);
pTIMER = new Ctimer(this);
KeyMap = KeyMapce126;
KeyMapLenght= KeyMapce126Lenght;
pKEYB->setMap("ce126.map");
setDX(620);
setDY(488);
setDXmm(116);
setDYmm(140);
setDZmm(23);
setPaperPos(QRect(150,-3,207,149));
ctrl_char = false;
t = 0;
c = 0;
rmtSwitch = false;
internal_device_code = 0x0f;
}
Chp82143A::Chp82143A(CPObject *parent):Cprinter(parent) {
setcfgfname(QString("hp82143a"));
BackGroundFname = P_RES(":/hp41/hp82143a.png");
pKEYB->setMap("hp82143a.map");
setDXmm(180);
setDYmm(130);
setDZmm(60);
setDX(643);
setDY(464);
margin = 30;
paperWidth = 24*7+margin+margin;
setPaperPos(QRect(355,16,216,250));
Mode = TRACE_MODE;
flow = fdwid = fprint = fpadv = fgraph = feol = frjust = fignADV = false;
isready = false;
intensity = 0;
}
Crlp1002::Crlp1002(CPObject *parent):Cce515p(parent)
{ //[constructor]
Q_UNUSED(parent)
setfrequency( 0);
margin = 25;
BackGroundFname = P_RES(":/rlh1000/rlp1002.png");
setcfgfname("rlp1002");
pTIMER = new Ctimer(this);
pKEYB->setMap("rlp1002.map");
setDXmm(227);
setDYmm(95);
setDZmm(31);
setDX(848);
setDY(340);
setPaperPos(QRect(57,-20,318,236));
rotate = false;
INTrequest = false;
printing = false;
receiveMode = false;
CRLFPending = false;
memsize = 0x2000;
InitMemValue = 0x7f;
SlotList.clear();
SlotList.append(CSlot(8 , 0x0000 , P_RES(":/rlh1000/rlp1002.bin") , "" , CSlot::ROM , "Printer ROM"));
}
bool Csio::initSignalMap(Cconnector::ConnectorType type) {
SMapMutex.lock();
switch (type) {
case Cconnector::Sharp_11 : signalMap.clear();
signalMap[S_SD] = 7; // ok
signalMap[S_RD] = 6; // ok
signalMap[S_RS] = 5;
signalMap[S_CS] = 9; // ok
signalMap[S_CD] = 8;
signalMap[S_RR] = 4;
signalMap[S_ER] = 5;
updateMapConsole();
pSIOCONNECTOR->Desc = "Sharp 11 pins";
pSIOCONNECTOR->setNbpins(11);
pSIOCONNECTOR->setType(Cconnector::Sharp_11);
WatchPoint.remove((qint64*)pSIOCONNECTOR_value);
WatchPoint.add(&pSIOCONNECTOR_value,64,11,this,pSIOCONNECTOR->Desc);
BackGroundFname = P_RES(":/ext/simu.png");
pSIOCONNECTOR->setSnap(QPoint(130,7));
setDX(160);
setDY(160);
resize(getDX(),getDY());
InitDisplay();
break;
case Cconnector::Sharp_15 : signalMap.clear();
signalMap[S_SD] = 2;
signalMap[S_RD] = 3;
signalMap[S_RS] = 4;
signalMap[S_CS] = 5;
signalMap[S_CD] = 8;
signalMap[S_RR] = 11;
signalMap[S_ER] = 14;
updateMapConsole();
pSIOCONNECTOR->Desc = "Sharp 15 pins";
pSIOCONNECTOR->setNbpins(15);
pSIOCONNECTOR->setType(Cconnector::Sharp_15);
WatchPoint.remove((qint64*)pSIOCONNECTOR_value);
WatchPoint.add(&pSIOCONNECTOR_value,64,15,this,pSIOCONNECTOR->Desc);
BackGroundFname = P_RES(":/ext/serial.png");
pSIOCONNECTOR->setSnap(QPoint(23,28));
setDX(195);
setDY(145);
resize(getDX(),getDY());
InitDisplay();
break;
case Cconnector::Canon_9 : signalMap.clear();
signalMap[S_SD] = 2;
signalMap[S_RD] = 3;
signalMap[S_RS] = 4;
signalMap[S_CS] = 5;
signalMap[S_CD] = 8;
signalMap[S_RR] = 11;
signalMap[S_ER] = 14;
updateMapConsole();
pSIOCONNECTOR->Desc = "Canon 9 pins";
pSIOCONNECTOR->setNbpins(9);
pSIOCONNECTOR->setType(Cconnector::Canon_9);
WatchPoint.remove((qint64*)pSIOCONNECTOR_value);
WatchPoint.add(&pSIOCONNECTOR_value,64,9,this,pSIOCONNECTOR->Desc);
break;
case Cconnector::DB_25 : signalMap.clear();
signalMap[S_SD] = 2;
signalMap[S_RD] = 3;
signalMap[S_RS] = 4;
signalMap[S_CS] = 5;
signalMap[S_CD] = 8;
signalMap[S_RR] = 11;
signalMap[S_ER] = 14;
updateMapConsole();
pSIOCONNECTOR->Desc = "DB25 Serial Connector";
pSIOCONNECTOR->setNbpins(25);
pSIOCONNECTOR->setType(Cconnector::DB_25);
WatchPoint.remove((qint64*)pSIOCONNECTOR_value);
WatchPoint.add(&pSIOCONNECTOR_value,64,25,this,pSIOCONNECTOR->Desc);
break;
case Cconnector::DIN_8 : signalMap.clear();
signalMap[S_SD] = 2;
signalMap[S_RD] = 3;
signalMap[S_RS] = 4;
signalMap[S_CS] = 5;
signalMap[S_CD] = 8;
signalMap[S_RR] = 11;
signalMap[S_ER] = 14;
updateMapConsole();
pSIOCONNECTOR->Desc = "DIN 8 pins";
pSIOCONNECTOR->setNbpins(8);
pSIOCONNECTOR->setType(Cconnector::DIN_8);
WatchPoint.remove((qint64*)pSIOCONNECTOR_value);
WatchPoint.add(&pSIOCONNECTOR_value,64,8,this,pSIOCONNECTOR->Desc);
break;
case Cconnector::Jack : signalMap.clear();
signalMap[S_SD] = 2;
signalMap[S_RD] = 1;
signalMap[S_RS] = 0xff;
signalMap[S_CS] = 0;
signalMap[S_CD] = 0;
signalMap[S_RR] = 0;
signalMap[S_ER] = 0xff;
updateMapConsole();
pSIOCONNECTOR->Desc = "Jack";
pSIOCONNECTOR->setNbpins(3);
pSIOCONNECTOR->setType(Cconnector::Jack);
WatchPoint.remove((qint64*)pSIOCONNECTOR_value);
WatchPoint.add(&pSIOCONNECTOR_value,64,3,this,pSIOCONNECTOR->Desc);
BackGroundFname = P_RES(":/ext/jackR.png");
pSIOCONNECTOR->setSnap(QPoint(56,6));
setDX(75);
setDY(20);
resize(getDX(),getDY());
InitDisplay();
break;
default: return false;
break;
}
SMapMutex.unlock();
return true;
}
Cz1::Cz1(CPObject *parent, Models mod) : CpcXXXX(parent)
{ //[constructor]
setfrequency( (int) 3686400);
model = mod;
switch (model) {
case Z1GR:
setcfgfname(QString("z1gr"));
setresName("z1");
SessionHeader = "Z1GGRPKM";
Initial_Session_Fname ="z1gr.pkm";
BackGroundFname = P_RES(":/z1/z1gr.png");
break;
case FX890P:
setcfgfname(QString("fx890p"));
setresName("z1");
SessionHeader = "FX890PPKM";
Initial_Session_Fname ="fx890p.pkm";
BackGroundFname = P_RES(":/z1/fx-890p.png");
break;
default:
setcfgfname(QString("z1"));
setresName("z1");
SessionHeader = "Z1PKM";
Initial_Session_Fname ="z1.pkm";
BackGroundFname = P_RES(":/z1/z1.png");
}
LeftFname = P_RES(":/z1/z1Left.png");
memsize = 0x100000;
InitMemValue = 0x00;
SlotList.clear();
SlotList.append(CSlot(64 , 0x00000 , "" , "" , CSlot::RAM , "RAM"));
SlotList.append(CSlot(64 , 0x10000 , "" , "" , CSlot::RAM , "RAM"));
SlotList.append(CSlot(64 , 0x20000 , "" , "" , CSlot::RAM , "RAM"));
SlotList.append(CSlot(64 , 0x30000 , "" , "" , CSlot::RAM , "RAM"));
SlotList.append(CSlot(32 , 0x40000 , "" , "" , CSlot::RAM , "RAM"));
SlotList.append(CSlot(64 , 0xa0000 , "" , "" , CSlot::RAM , "VIDEO RAM"));
if (model==Z1GR)
SlotList.append(CSlot(128 , 0xE0000 , P_RES(":/z1/romz1gr.bin") , "" , CSlot::ROM , "ROM"));
else
SlotList.append(CSlot(128 , 0xE0000 , P_RES(":/z1/romz1.bin") , "" , CSlot::ROM , "ROM"));
PowerSwitch = 0;
setDXmm(206);
setDYmm(83);
setDZmm(25);
setDX(736);
setDY(297);
PowerSwitch = 0;
pLCDC = new Clcdc_z1(this,
QRect(91,44,370,64),
QRect(81,44,89,64));
// QRect(77,44,384,64),
// QRect(67,44,75,64));
pCPU = new Ci80L188EB(this);
pFPU = new CCF79107PJ(this);
pTIMER = new Ctimer(this);
pHD66108 = new CHD66108(this);
pKEYB->setMap("z1.map");
pCENT = new Cctronics(this); pCENT->pTIMER = pTIMER;
lastKeyBufSize = 0;
newKey = false;
i80l188ebcpu = (Ci80L188EB*)pCPU;
ioFreq = 0;
pCENTflip = true;
}
Ccemem::Ccemem(CPObject *parent ,Models mod):CPObject(parent)
{
setDXmm(42);
setDYmm(54);
setDZmm(3);
setDX(150);
setDY(192);
SlotList.clear();
InitMemValue = 0x00;
setDXmm(33);
setDYmm(40);
setDZmm(7);
setDX(115);
setDY(139);
model = mod;
switch(model) {
case CE151: // 4KB RAM module
BackGroundFname = P_RES(":/cemem/ce151.png");
setcfgfname(QString("ce151"));
memsize = 0x1000;
SlotList.append(CSlot(4 , 0x0000 , "" , "" , CSlot::RAM , "RAM 4KB"));
break;
case CE155: // 8KB RAM module
BackGroundFname = P_RES(":/cemem/ce155.png");
setcfgfname(QString("ce155"));
memsize = 0x2000;
SlotList.append(CSlot(8 , 0x0000 , "" , "" , CSlot::RAM , "RAM 8KB"));
break;
case CE160: // 16KB RAM module
setDXmm(41);
setDYmm(48);
setDZmm(9);
setDX(143);
setDY(167);
BackGroundFname = P_RES(":/cemem/ce160.png");
setcfgfname(QString("ce160"));
memsize = 0x4000;
SlotList.append(CSlot(16 , 0x0000 , "" , "" , CSlot::RAM , "RAM 16KB"));
break;
case CE163: // 32KB RAM module
setDXmm(41);
setDYmm(48);
setDZmm(9);
setDX(143);
setDY(167);
BackGroundFname = P_RES(":/cemem/ce163.png");
setcfgfname(QString("ce163"));
memsize = 0x8000;
SlotList.append(CSlot(32 , 0x0000 , "" , "" , CSlot::RAM , "RAM 32KB"));
break;
default: break;
}
bus1500 = new CbusPc1500();
}