Esempi in C++ (Cpp) per set_esoc_clink_data

Esempio n. 1

File: esoc-mdm-4x.c Progetto: HRTKernel/Hacker_Kernel_SM-G92X_MM_Beta

static int mdm9x25_setup_hw(struct mdm_ctrl *mdm,
					struct esoc_clink_ops const *ops,
					struct platform_device *pdev)
{
	int ret;
	struct esoc_clink *esoc;

	pr_info("[MIF] %s\n", __func__);
	mdm->dev = &pdev->dev;
	esoc = devm_kzalloc(mdm->dev, sizeof(*esoc), GFP_KERNEL);
	if (IS_ERR(esoc)) {
		dev_err(mdm->dev, "cannot allocate esoc device\n");
		return PTR_ERR(esoc);
	}
	mdm->mdm_queue = alloc_workqueue("mdm_queue", 0, 0);
	if (!mdm->mdm_queue) {
		dev_err(mdm->dev, "could not create mdm_queue\n");
		return -ENOMEM;
	}
	mdm->irq_mask = 0;
	mdm->ready = false;
	ret = mdm_dt_parse_gpios(mdm);
	if (ret)
		return ret;
	dev_err(mdm->dev, "parsing gpio done\n");
	ret = mdm_configure_ipc(mdm, pdev);
	if (ret)
		return ret;
	dev_err(mdm->dev, "ipc configure done\n");
	esoc->name = MDM9x25_LABEL;
	esoc->link_name = MDM9x25_HSIC;
	esoc->clink_ops = ops;
	esoc->parent = mdm->dev;
	esoc->owner = THIS_MODULE;
	esoc->np = pdev->dev.of_node;
	set_esoc_clink_data(esoc, mdm);
	ret = esoc_clink_register(esoc);
	if (ret) {
		dev_err(mdm->dev, "esoc registration failed\n");
		return ret;
	}
	dev_dbg(mdm->dev, "esoc registration done\n");
	init_completion(&mdm->debug_done);
	INIT_WORK(&mdm->mdm_status_work, mdm_status_fn);
	INIT_WORK(&mdm->restart_reason_work, mdm_get_restart_reason);
	INIT_DELAYED_WORK(&mdm->mdm2ap_status_check_work, mdm2ap_status_check);
	mdm->get_restart_reason = false;
	mdm->cp_crash_occurrence= false;
	mdm->debug_fail = false;
	mdm->esoc = esoc;
	mdm->init = 0;

	return 0;
}

Esempio n. 2

static int mdm9x35_setup_hw(struct mdm_ctrl *mdm,
					struct esoc_clink_ops const *ops,
					struct platform_device *pdev)
{
	int ret;
	struct device_node *node;
	struct esoc_clink *esoc;

	mdm->dev = &pdev->dev;
	node = pdev->dev.of_node;
	esoc = devm_kzalloc(mdm->dev, sizeof(*esoc), GFP_KERNEL);
	if (IS_ERR(esoc)) {
		dev_err(mdm->dev, "cannot allocate esoc device\n");
		return PTR_ERR(esoc);
	}
	mdm->mdm_queue = alloc_workqueue("mdm_queue", 0, 0);
	if (!mdm->mdm_queue) {
		dev_err(mdm->dev, "could not create mdm_queue\n");
		return -ENOMEM;
	}
	mdm->irq_mask = 0;
	mdm->ready = false;
	ret = mdm_dt_parse_gpios(mdm);
	if (ret)
		return ret;
	dev_dbg(mdm->dev, "parsing gpio done\n");
	ret = mdm_configure_ipc(mdm, pdev);
	if (ret)
		return ret;
	dev_dbg(mdm->dev, "ipc configure done\n");
	esoc->name = MDM9x35_LABEL;
	mdm->dual_interface = of_property_read_bool(node,
						"qcom,mdm-dual-link");
	/* Check if link gpio is available */
	if (gpio_is_valid(MDM_GPIO(mdm, MDM_LINK_DETECT))) {
		if (mdm->dual_interface) {
			if (gpio_get_value(MDM_GPIO(mdm, MDM_LINK_DETECT)))
				esoc->link_name = MDM9x35_DUAL_LINK;
			else
				esoc->link_name = MDM9x35_PCIE;
		} else {
			if (gpio_get_value(MDM_GPIO(mdm, MDM_LINK_DETECT)))
				esoc->link_name = MDM9x35_HSIC;
			else
				esoc->link_name = MDM9x35_PCIE;
		}
	} else if (mdm->dual_interface)
		esoc->link_name = MDM9x35_DUAL_LINK;
	else
		esoc->link_name = MDM9x35_HSIC;
	esoc->clink_ops = ops;
	esoc->parent = mdm->dev;
	esoc->owner = THIS_MODULE;
	esoc->np = pdev->dev.of_node;
	set_esoc_clink_data(esoc, mdm);
	ret = esoc_clink_register(esoc);
	if (ret) {
		dev_err(mdm->dev, "esoc registration failed\n");
		return ret;
	}
	dev_dbg(mdm->dev, "esoc registration done\n");
	init_completion(&mdm->debug_done);
	INIT_WORK(&mdm->mdm_status_work, mdm_status_fn);
	INIT_WORK(&mdm->restart_reason_work, mdm_get_restart_reason);
	INIT_DELAYED_WORK(&mdm->mdm2ap_status_check_work, mdm2ap_status_check);
	mdm->get_restart_reason = false;
	mdm->debug_fail = false;
	mdm->esoc = esoc;
	mdm->init = 0;
	return 0;
}