/*
* Prompt user to load a new dump volume.
* "Nextvol" is the next suggested volume to use.
* This suggested volume is enforced when doing full
* or incremental restores, but can be overridden by
* the user when only extracting a subset of the files.
*/
void
getvol(long nextvol)
{
int64_t prevtapea;
long i, newvol, savecnt;
union u_spcl tmpspcl;
# define tmpbuf tmpspcl.s_spcl
char buf[TP_BSIZE];
if (nextvol == 1) {
tapesread = 0;
gettingfile = 0;
}
prevtapea = tapeaddr;
savecnt = blksread;
if (pipein) {
if (nextvol != 1) {
panic("Changing volumes on pipe input?\n");
/* Avoid looping if we couldn't ask the user. */
if (yflag || ferror(terminal) || feof(terminal))
done(1);
}
if (volno == 1)
return;
goto gethdr;
}
again:
if (pipein)
done(1); /* pipes do not get a second chance */
if (command == 'R' || command == 'r' || curfile.action != SKIP)
newvol = nextvol;
else
newvol = 0;
while (newvol <= 0) {
if (tapesread == 0) {
fprintf(stderr, "%s%s%s%s%s%s%s",
"You have not read any tapes yet.\n",
"If you are extracting just a few files,",
" start with the last volume\n",
"and work towards the first; restore",
" can quickly skip tapes that\n",
"have no further files to extract.",
" Otherwise, begin with volume 1.\n");
} else {
fprintf(stderr, "You have read volumes");
strcpy(buf, ": ");
for (i = 0; i < 32; i++)
if (tapesread & (1 << i)) {
fprintf(stderr, "%s%ld", buf, i + 1);
strcpy(buf, ", ");
}
fprintf(stderr, "\n");
}
do {
fprintf(stderr, "Specify next volume #: ");
(void) fflush(stderr);
if (fgets(buf, BUFSIZ, terminal) == NULL)
done(1);
} while (buf[0] == '\n');
newvol = atoi(buf);
if (newvol <= 0) {
fprintf(stderr,
"Volume numbers are positive numerics\n");
}
}
if (newvol == volno) {
tapesread |= 1 << (volno - 1);
return;
}
closemt();
fprintf(stderr, "Mount tape volume %ld\n", newvol);
fprintf(stderr, "Enter ``none'' if there are no more tapes\n");
fprintf(stderr, "otherwise enter tape name (default: %s) ", magtape);
(void) fflush(stderr);
if (fgets(buf, BUFSIZ, terminal) == NULL)
done(1);
if (!strcmp(buf, "none\n")) {
terminateinput();
return;
}
if (buf[0] != '\n') {
(void) strcpy(magtape, buf);
magtape[strlen(magtape) - 1] = '\0';
}
if (pipecmdin) {
char volno[sizeof("2147483647")];
(void)sprintf(volno, "%ld", newvol);
if (setenv("RESTORE_VOLUME", volno, 1) == -1) {
fprintf(stderr, "Cannot set $RESTORE_VOLUME: %s\n",
strerror(errno));
done(1);
}
popenfp = popen(magtape, "r");
mt = popenfp ? fileno(popenfp) : -1;
} else
#ifdef RRESTORE
if (host)
mt = rmtopen(magtape, 0);
else
#endif
mt = open(magtape, O_RDONLY, 0);
if (mt == -1) {
fprintf(stderr, "Cannot open %s\n", magtape);
volno = -1;
goto again;
}
gethdr:
volno = newvol;
setdumpnum();
FLUSHTAPEBUF();
if (gethead(&tmpbuf) == FAIL) {
dprintf(stdout, "header read failed at %ld blocks\n", blksread);
fprintf(stderr, "tape is not dump tape\n");
volno = 0;
goto again;
}
if (tmpbuf.c_volume != volno) {
fprintf(stderr, "Wrong volume (%jd)\n",
(intmax_t)tmpbuf.c_volume);
volno = 0;
goto again;
}
if (_time64_to_time(tmpbuf.c_date) != dumpdate ||
_time64_to_time(tmpbuf.c_ddate) != dumptime) {
time_t t = _time64_to_time(tmpbuf.c_date);
fprintf(stderr, "Wrong dump date\n\tgot: %s", ctime(&t));
fprintf(stderr, "\twanted: %s", ctime(&dumpdate));
volno = 0;
goto again;
}
tapesread |= 1 << (volno - 1);
blksread = savecnt;
/*
* If continuing from the previous volume, skip over any
* blocks read already at the end of the previous volume.
*
* If coming to this volume at random, skip to the beginning
* of the next record.
*/
dprintf(stdout, "last rec %jd, tape starts with %jd\n",
(intmax_t)prevtapea, (intmax_t)tmpbuf.c_tapea);
if (tmpbuf.c_type == TS_TAPE) {
if (curfile.action != USING) {
/*
* XXX Dump incorrectly sets c_count to 1 in the
* volume header of the first tape, so ignore
* c_count when volno == 1.
*/
if (volno != 1)
for (i = tmpbuf.c_count; i > 0; i--)
readtape(buf);
} else if (tmpbuf.c_tapea <= prevtapea) {
/*
* Normally the value of c_tapea in the volume
* header is the record number of the header itself.
* However in the volume header following an EOT-
* terminated tape, it is the record number of the
* first continuation data block (dump bug?).
*
* The next record we want is `prevtapea + 1'.
*/
i = prevtapea + 1 - tmpbuf.c_tapea;
dprintf(stderr, "Skipping %ld duplicate record%s.\n",
i, i > 1 ? "s" : "");
while (--i >= 0)
readtape(buf);
}
}
if (curfile.action == USING) {
if (volno == 1)
panic("active file into volume 1\n");
return;
}
(void) gethead(&spcl);
findinode(&spcl);
if (gettingfile) {
gettingfile = 0;
longjmp(restart, 1);
}
}
/*
* Verify that the tape drive can be accessed and
* that it actually is a dump tape.
*/
void
setup(void)
{
int i, j, *ip;
struct stat stbuf;
vprintf(stdout, "Verify tape and initialize maps\n");
if (pipecmdin) {
if (setenv("RESTORE_VOLUME", "1", 1) == -1) {
fprintf(stderr, "Cannot set $RESTORE_VOLUME: %s\n",
strerror(errno));
done(1);
}
popenfp = popen(magtape, "r");
mt = popenfp ? fileno(popenfp) : -1;
} else
#ifdef RRESTORE
if (host)
mt = rmtopen(magtape, 0);
else
#endif
if (pipein)
mt = 0;
else
mt = open(magtape, O_RDONLY, 0);
if (mt < 0) {
fprintf(stderr, "%s: %s\n", magtape, strerror(errno));
done(1);
}
volno = 1;
setdumpnum();
FLUSHTAPEBUF();
if (!pipein && !pipecmdin && !bflag)
findtapeblksize();
if (gethead(&spcl) == FAIL) {
fprintf(stderr, "Tape is not a dump tape\n");
done(1);
}
if (pipein) {
endoftapemark.s_spcl.c_magic = FS_UFS2_MAGIC;
endoftapemark.s_spcl.c_type = TS_END;
ip = (int *)&endoftapemark;
j = sizeof(union u_spcl) / sizeof(int);
i = 0;
do
i += *ip++;
while (--j);
endoftapemark.s_spcl.c_checksum = CHECKSUM - i;
}
if (vflag || command == 't')
printdumpinfo();
dumptime = _time64_to_time(spcl.c_ddate);
dumpdate = _time64_to_time(spcl.c_date);
if (stat(".", &stbuf) < 0) {
fprintf(stderr, "cannot stat .: %s\n", strerror(errno));
done(1);
}
if (stbuf.st_blksize > 0 && stbuf.st_blksize < TP_BSIZE )
fssize = TP_BSIZE;
if (stbuf.st_blksize >= TP_BSIZE && stbuf.st_blksize <= MAXBSIZE)
fssize = stbuf.st_blksize;
if (((TP_BSIZE - 1) & stbuf.st_blksize) != 0) {
fprintf(stderr, "Warning: filesystem with non-multiple-of-%d "
"blocksize (%d);\n", TP_BSIZE, stbuf.st_blksize);
fssize = roundup(fssize, TP_BSIZE);
fprintf(stderr, "\twriting using blocksize %ld\n", fssize);
}
if (spcl.c_volume != 1) {
fprintf(stderr, "Tape is not volume 1 of the dump\n");
done(1);
}
if (gethead(&spcl) == FAIL) {
dprintf(stdout, "header read failed at %ld blocks\n", blksread);
panic("no header after volume mark!\n");
}
findinode(&spcl);
if (spcl.c_type != TS_CLRI) {
fprintf(stderr, "Cannot find file removal list\n");
done(1);
}
maxino = (spcl.c_count * TP_BSIZE * NBBY) + 1;
dprintf(stdout, "maxino = %ju\n", (uintmax_t)maxino);
map = calloc((unsigned)1, (unsigned)howmany(maxino, NBBY));
if (map == NULL)
panic("no memory for active inode map\n");
usedinomap = map;
curfile.action = USING;
getfile(xtrmap, xtrmapskip, xtrmapskip);
if (spcl.c_type != TS_BITS) {
fprintf(stderr, "Cannot find file dump list\n");
done(1);
}
map = calloc((unsigned)1, (unsigned)howmany(maxino, NBBY));
if (map == (char *)NULL)
panic("no memory for file dump list\n");
dumpmap = map;
curfile.action = USING;
getfile(xtrmap, xtrmapskip, xtrmapskip);
/*
* If there may be whiteout entries on the tape, pretend that the
* whiteout inode exists, so that the whiteout entries can be
* extracted.
*/
SETINO(WINO, dumpmap);
/* 'r' restores don't call getvol() for tape 1, so mark it as read. */
if (command == 'r')
tapesread = 1;
}
/*
* Verify that the tape drive can be accessed and
* that it actually is a dump tape.
*/
void
setup(void)
{
int i, j, *ip;
struct stat stbuf;
Vprintf(stdout, "Verify tape and initialize maps\n");
#ifdef RRESTORE
if (host)
mt = rmtopen(magtape, 0);
else
#endif
if (pipein)
mt = 0;
else
mt = open(magtape, O_RDONLY);
if (mt < 0)
err(1, "%s", magtape);
volno = 1;
setdumpnum();
FLUSHTAPEBUF();
if (!pipein && !bflag)
findtapeblksize();
if (gethead(&spcl) == FAIL) {
blkcnt--; /* push back this block */
blksread--;
tpblksread--;
cvtflag++;
if (gethead(&spcl) == FAIL)
errx(1, "Tape is not a dump tape");
(void)fputs("Converting to new file system format.\n", stderr);
}
if (pipein) {
endoftapemark.s_spcl.c_magic = cvtflag ? OFS_MAGIC :
FS_UFS2_MAGIC;
endoftapemark.s_spcl.c_type = TS_END;
ip = (int *)&endoftapemark;
j = sizeof(union u_spcl) / sizeof(int);
i = 0;
do
i += *ip++;
while (--j);
endoftapemark.s_spcl.c_checksum = CHECKSUM - i;
}
if (vflag || command == 't')
printdumpinfo();
dumptime = (time_t)spcl.c_ddate;
dumpdate = (time_t)spcl.c_date;
if (stat(".", &stbuf) < 0)
err(1, "cannot stat .");
if (stbuf.st_blksize > 0 && stbuf.st_blksize < TP_BSIZE )
fssize = TP_BSIZE;
if (stbuf.st_blksize >= TP_BSIZE && stbuf.st_blksize <= MAXBSIZE)
fssize = stbuf.st_blksize;
if (((fssize - 1) & fssize) != 0)
errx(1, "bad block size %ld", fssize);
if (spcl.c_volume != 1)
errx(1, "Tape is not volume 1 of the dump");
if (gethead(&spcl) == FAIL) {
Dprintf(stdout, "header read failed at %ld blocks\n", blksread);
panic("no header after volume mark!\n");
}
findinode(&spcl);
if (spcl.c_type != TS_CLRI)
errx(1, "Cannot find file removal list");
maxino = (spcl.c_count * TP_BSIZE * NBBY) + 1;
Dprintf(stdout, "maxino = %d\n", maxino);
map = calloc(1, howmany(maxino, NBBY));
if (map == NULL)
panic("no memory for active inode map\n");
usedinomap = map;
curfile.action = USING;
getfile(xtrmap, xtrmapskip);
if (spcl.c_type != TS_BITS)
errx(1, "Cannot find file dump list");
map = calloc(1, howmany(maxino, NBBY));
if (map == NULL)
panic("no memory for file dump list\n");
dumpmap = map;
curfile.action = USING;
getfile(xtrmap, xtrmapskip);
}
/*
* Prompt user to load a new dump volume.
* "Nextvol" is the next suggested volume to use.
* This suggested volume is enforced when doing full
* or incremental restores, but can be overrridden by
* the user when only extracting a subset of the files.
*/
void
getvol(long nextvol)
{
long newvol = 0, savecnt = 0, wantnext = 0, i;
union u_spcl tmpspcl;
# define tmpbuf tmpspcl.s_spcl
char buf[TP_BSIZE];
const char *errstr;
if (nextvol == 1) {
tapesread = 0;
gettingfile = 0;
}
if (pipein) {
if (nextvol != 1)
panic("Changing volumes on pipe input?\n");
if (volno == 1)
return;
goto gethdr;
}
savecnt = blksread;
again:
if (pipein)
exit(1); /* pipes do not get a second chance */
if (command == 'R' || command == 'r' || curfile.action != SKIP) {
newvol = nextvol;
wantnext = 1;
} else {
newvol = 0;
wantnext = 0;
}
while (newvol <= 0) {
if (tapesread == 0) {
fprintf(stderr, "%s%s%s%s%s",
"You have not read any tapes yet.\n",
"Unless you know which volume your",
" file(s) are on you should start\n",
"with the last volume and work",
" towards the first.\n");
} else {
fprintf(stderr, "You have read volumes");
strlcpy(buf, ": ", sizeof buf);
for (i = 1; i < 32; i++)
if (tapesread & (1 << i)) {
fprintf(stderr, "%s%ld", buf, i);
strlcpy(buf, ", ", sizeof buf);
}
fprintf(stderr, "\n");
}
do {
fprintf(stderr, "Specify next volume #: ");
(void)fflush(stderr);
if (fgets(buf, sizeof buf, terminal) == NULL)
exit(1);
buf[strcspn(buf, "\n")] = '\0';
newvol = strtonum(buf, 1, INT_MAX, &errstr);
if (errstr)
fprintf(stderr, "Volume number %s: %s\n", errstr, buf);
} while (errstr);
}
if (newvol == volno) {
tapesread |= 1 << volno;
return;
}
closemt();
fprintf(stderr, "Mount tape volume %ld\n", newvol);
fprintf(stderr, "Enter ``none'' if there are no more tapes\n");
fprintf(stderr, "otherwise enter tape name (default: %s) ", magtape);
(void)fflush(stderr);
if (fgets(buf, sizeof buf, terminal) == NULL || feof(terminal))
exit(1);
buf[strcspn(buf, "\n")] = '\0';
if (strcmp(buf, "none") == 0) {
terminateinput();
return;
}
if (buf[0] != '\0')
(void)strlcpy(magtape, buf, sizeof magtape);
#ifdef RRESTORE
if (host)
mt = rmtopen(magtape, 0);
else
#endif
mt = open(magtape, O_RDONLY);
if (mt == -1) {
fprintf(stderr, "Cannot open %s\n", magtape);
volno = -1;
goto again;
}
gethdr:
volno = newvol;
setdumpnum();
FLUSHTAPEBUF();
if (gethead(&tmpbuf) == FAIL) {
Dprintf(stdout, "header read failed at %ld blocks\n", blksread);
fprintf(stderr, "tape is not dump tape\n");
volno = 0;
goto again;
}
if (tmpbuf.c_volume != volno) {
fprintf(stderr, "Wrong volume (%d)\n", tmpbuf.c_volume);
volno = 0;
goto again;
}
if (tmpbuf.c_date != dumpdate || tmpbuf.c_ddate != dumptime) {
time_t t = (time_t)tmpbuf.c_date;
fprintf(stderr, "Wrong dump date\n\tgot: %s", ctime(&t));
fprintf(stderr, "\twanted: %s", ctime(&dumpdate));
volno = 0;
goto again;
}
tapesread |= 1 << volno;
blksread = savecnt;
/*
* If continuing from the previous volume, skip over any
* blocks read already at the end of the previous volume.
*
* If coming to this volume at random, skip to the beginning
* of the next record.
*/
Dprintf(stdout, "read %ld recs, tape starts with %lld\n",
tpblksread, tmpbuf.c_firstrec);
if (tmpbuf.c_type == TS_TAPE && (tmpbuf.c_flags & DR_NEWHEADER)) {
if (!wantnext) {
tpblksread = tmpbuf.c_firstrec;
for (i = tmpbuf.c_count; i > 0; i--)
readtape(buf);
} else if (tmpbuf.c_firstrec > 0 &&
tmpbuf.c_firstrec < tpblksread - 1) {
/*
* -1 since we've read the volume header
*/
i = tpblksread - tmpbuf.c_firstrec - 1;
Dprintf(stderr, "Skipping %ld duplicate record%s.\n",
i, (i == 1) ? "" : "s");
while (--i >= 0)
readtape(buf);
}
}
if (curfile.action == USING) {
if (volno == 1)
panic("active file into volume 1\n");
return;
}
/*
* Skip up to the beginning of the next record
*/
if (tmpbuf.c_type == TS_TAPE && (tmpbuf.c_flags & DR_NEWHEADER))
for (i = tmpbuf.c_count; i > 0; i--)
readtape(buf);
(void)gethead(&spcl);
findinode(&spcl);
if (gettingfile) {
gettingfile = 0;
longjmp(restart, 1);
}
}
/*
* Verify that the tape drive can be accessed and
* that it actually is a dump tape.
*/
void
setup(void)
{
int i, j, *ip;
struct stat stbuf;
vprintf(stdout, "Verify tape and initialize maps\n");
#ifdef RRESTORE
if (host)
mt = rmtopen(magtape, 0);
else
#endif
if (pipein)
mt = 0;
else
mt = open(magtape, O_RDONLY, 0);
if (mt < 0) {
fprintf(stderr, "%s: %s\n", magtape, strerror(errno));
done(1);
}
volno = 1;
setdumpnum();
FLUSHTAPEBUF();
if (!pipein && !bflag)
findtapeblksize();
if (gethead(&spcl) == FAIL) {
blkcnt--; /* push back this block */
blksread--;
cvtflag++;
if (gethead(&spcl) == FAIL) {
fprintf(stderr, "Tape is not a dump tape\n");
done(1);
}
fprintf(stderr, "Converting to new file system format.\n");
}
if (pipein) {
endoftapemark.s_spcl.c_magic = cvtflag ? OFS_MAGIC : NFS_MAGIC;
endoftapemark.s_spcl.c_type = TS_END;
ip = (int *)&endoftapemark;
j = sizeof(union u_spcl) / sizeof(int);
i = 0;
do
i += *ip++;
while (--j);
endoftapemark.s_spcl.c_checksum = CHECKSUM - i;
}
if (vflag || command == 't')
printdumpinfo();
dumptime = spcl.c_ddate;
dumpdate = spcl.c_date;
if (stat(".", &stbuf) < 0) {
fprintf(stderr, "cannot stat .: %s\n", strerror(errno));
done(1);
}
if (stbuf.st_blksize > 0 && stbuf.st_blksize < TP_BSIZE )
fssize = TP_BSIZE;
if (stbuf.st_blksize >= TP_BSIZE && stbuf.st_blksize <= MAXBSIZE)
fssize = stbuf.st_blksize;
if (((fssize - 1) & fssize) != 0) {
fprintf(stderr, "bad block size %ld\n", fssize);
done(1);
}
if (spcl.c_volume != 1) {
fprintf(stderr, "Tape is not volume 1 of the dump\n");
done(1);
}
if (gethead(&spcl) == FAIL) {
dprintf(stdout, "header read failed at %ld blocks\n", blksread);
panic("no header after volume mark!\n");
}
findinode(&spcl);
if (spcl.c_type != TS_CLRI) {
fprintf(stderr, "Cannot find file removal list\n");
done(1);
}
maxino = (spcl.c_count * TP_BSIZE * NBBY) + 1;
dprintf(stdout, "maxino = %d\n", maxino);
map = calloc((unsigned)1, (unsigned)howmany(maxino, NBBY));
if (map == NULL)
panic("no memory for active inode map\n");
usedinomap = map;
curfile.action = USING;
getfile(xtrmap, xtrmapskip);
if (spcl.c_type != TS_BITS) {
fprintf(stderr, "Cannot find file dump list\n");
done(1);
}
map = calloc((unsigned)1, (unsigned)howmany(maxino, NBBY));
if (map == NULL)
panic("no memory for file dump list\n");
dumpmap = map;
curfile.action = USING;
getfile(xtrmap, xtrmapskip);
/*
* If there may be whiteout entries on the tape, pretend that the
* whiteout inode exists, so that the whiteout entries can be
* extracted.
*/
if (oldinofmt == 0)
SETINO(WINO, dumpmap);
/* 'r' restores don't call getvol() for tape 1, so mark it as read. */
if (command == 'r')
tapesread = 1;
}