static void
bcm947xx_reboot_handler(void)
{
#ifndef BCMDBG
int wombo_reset;
#endif /* BCMDBG */
/* Reset the PCI(e) interfaces */
if (CHIPID(sih->chip) == BCM4706_CHIP_ID)
hndpci_deinit(sih);
if (lanports_enable) {
uint lp = 1 << lanports_enable;
si_gpioout(sih, lp, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, lp, lp, GPIO_DRV_PRIORITY);
bcm_mdelay(1);
}
#ifndef BCMDBG
/* gpio 0 is also valid wombo_reset */
if ((wombo_reset = getgpiopin(NULL, "wombo_reset", GPIO_PIN_NOTDEFINED)) !=
GPIO_PIN_NOTDEFINED) {
int reset = 1 << wombo_reset;
si_gpioout(sih, reset, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(10);
}
#endif /* BCMDBG */
}
void __init
brcm_setup(void)
{
char *value;
/* Get global SB handle */
sih = si_kattach(SI_OSH);
/* Initialize clocks and interrupts */
si_mips_init(sih, SBMIPS_VIRTIRQ_BASE);
if (BCM330X(current_cpu_data.processor_id) &&
(read_c0_diag() & BRCM_PFC_AVAIL)) {
/*
* Now that the sih is inited set the proper PFC value
*/
printk("Setting the PFC to its default value\n");
enable_pfc(PFC_AUTO);
}
#ifdef CONFIG_SERIAL_CORE
/* Initialize UARTs */
serial_setup(sih);
#endif /* CONFIG_SERIAL_CORE */
/* Override default command line arguments */
value = nvram_get("kernel_args");
if (value && strlen(value) && strncmp(value, "empty", 5))
strncpy(arcs_cmdline, value, sizeof(arcs_cmdline));
if ((lanports_enable = getgpiopin(NULL, "lanports_enable", GPIO_PIN_NOTDEFINED)) ==
GPIO_PIN_NOTDEFINED)
lanports_enable = 0;
/* wombo reset */
if ((wombo_reset = getgpiopin(NULL, "wombo_reset", GPIO_PIN_NOTDEFINED)) !=
GPIO_PIN_NOTDEFINED) {
int reset = 1 << wombo_reset;
printk("wombo_reset set to gpio %d\n", wombo_reset);
si_gpioout(sih, reset, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(10);
si_gpioout(sih, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(20);
}
/* Generic setup */
_machine_restart = bcm947xx_machine_restart;
_machine_halt = bcm947xx_machine_halt;
pm_power_off = bcm947xx_machine_halt;
}
/* Advance clock(s) */
static void
adm_adclk(adm_info_t *adm, int clocks)
{
int i;
for (i = 0; i < clocks; i ++) {
/* Clock high */
si_gpioout(adm->sih, adm->eesk, adm->eesk, GPIO_DRV_PRIORITY);
OSL_DELAY(EECK_EDGE_TIME);
/* Clock low */
si_gpioout(adm->sih, adm->eesk, 0, GPIO_DRV_PRIORITY);
OSL_DELAY(EECK_EDGE_TIME);
}
}
int gpio_kernel_api(unsigned int cmd, unsigned int mask, unsigned int val)
{
if (gpio_init_flag != 1) {
if (gpio_init() != 0)
return -EFAULT;
}
switch (cmd) {
case 0:
si_gpioout(gpio_sih, mask, val, GPIO_HI_PRIORITY);
break;
case 1:
si_gpioouten(gpio_sih, mask, val, GPIO_HI_PRIORITY);
break;
case 3:
si_gpioreserve(gpio_sih, mask, GPIO_HI_PRIORITY);
break;
default:
printk("Unknown gpio_kenerl_api command\n");
break;
}
return 0;
}
static void led_control(uint32 gpio, uint32 value)
{
uint32 mask = 1 << gpio;
uint32 gpio_value;
if (sih == NULL)
{
xprintf("si attach failed\n");
return;
}
if (value)
{
gpio_value = 1 << gpio;
}
else
{
gpio_value = 0 << gpio;
}
/*
* output mode
*/
si_gpioouten(sih, mask, mask, GPIO_DRV_PRIORITY);
si_gpioout(sih, mask, gpio_value, GPIO_DRV_PRIORITY);
}
static ssize_t
gpio_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
{
u32 val;
if (get_user(val, (u32 *) buf))
return -EFAULT;
switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
case 0:
return -EACCES;
case 1:
si_gpioout(gpio_sih, ~0, val, GPIO_APP_PRIORITY);
break;
case 2:
si_gpioouten(gpio_sih, ~0, val, GPIO_APP_PRIORITY);
break;
case 3:
si_gpiocontrol(gpio_sih, ~0, val, GPIO_APP_PRIORITY);
break;
default:
return -ENODEV;
}
return sizeof(val);
}
/* for driver-call usage */
uint32
_gpio_ctrl(unsigned int cmd, uint32 mask, uint32 val)
{
struct gpio_ioctl gpioioc;
unsigned long flags;
gpioioc.mask = mask;
gpioioc.val = val;
switch (cmd) {
case GPIO_IOC_RESERVE:
gpioioc.val = si_gpioreserve(gpio_sih, gpioioc.mask, GPIO_APP_PRIORITY);
break;
case GPIO_IOC_RELEASE:
gpioioc.val = si_gpiorelease(gpio_sih, gpioioc.mask, GPIO_APP_PRIORITY);
break;
case GPIO_IOC_OUT:
gpioioc.val = si_gpioout(gpio_sih, gpioioc.mask, gpioioc.val,
GPIO_APP_PRIORITY);
break;
case GPIO_IOC_OUTEN:
gpioioc.val = si_gpioouten(gpio_sih, gpioioc.mask, gpioioc.val,
GPIO_APP_PRIORITY);
break;
case GPIO_IOC_IN:
gpioioc.val = si_gpioin(gpio_sih);
break;
default:
break;
}
return gpioioc.val;
}
static ssize_t
gpio_read(struct file *file, char *buf, size_t count, loff_t *ppos)
{
u32 val;
switch (MINOR(file->f_dentry->d_inode->i_rdev)) {
case 0:
val = si_gpioin(gpio_sih);
break;
case 1:
val = si_gpioout(gpio_sih, 0, 0, GPIO_APP_PRIORITY);
break;
case 2:
val = si_gpioouten(gpio_sih, 0, 0, GPIO_APP_PRIORITY);
break;
case 3:
val = si_gpiocontrol(gpio_sih, 0, 0, GPIO_APP_PRIORITY);
break;
default:
return -ENODEV;
}
if (put_user(val, (u32 *) buf))
return -EFAULT;
return sizeof(val);
}
/* Enable outputs with specified value to the chip */
static void
adm_enout(adm_info_t *adm, uint32 pins, uint val)
{
/* Prepare GPIO output value */
si_gpioout(adm->sih, pins, val, GPIO_DRV_PRIORITY);
/* Enable GPIO outputs */
si_gpioouten(adm->sih, pins, pins, GPIO_DRV_PRIORITY);
OSL_DELAY(EECK_EDGE_TIME);
}
int gpio_direction_output(unsigned gpio, int value)
{
int out, outen;
outen = si_gpioouten(gpio_sih, (1<<gpio), (1<<gpio), GPIO_APP_PRIORITY);
out = si_gpioout(gpio_sih, (1<<gpio), (value ? (1<<gpio) : 0), GPIO_APP_PRIORITY);
DBG("%s: gpio %d, value %d - out 0x%x outen 0x%x\n", __FUNCTION__, gpio, value, out, outen);
return 0;
}
static long
gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
#else
static int
gpio_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
#endif /* linux-2.6.22 */
struct gpio_ioctl gpioioc;
if (copy_from_user(&gpioioc, (struct gpio_ioctl *)arg, sizeof(struct gpio_ioctl)))
return -EFAULT;
switch (cmd) {
case GPIO_IOC_RESERVE:
gpioioc.val = si_gpioreserve(gpio_sih, gpioioc.mask, GPIO_APP_PRIORITY);
break;
case GPIO_IOC_RELEASE:
/*
* releasing the gpio doesn't change the current
* value on the GPIO last write value
* persists till some one overwrites it
*/
gpioioc.val = si_gpiorelease(gpio_sih, gpioioc.mask, GPIO_APP_PRIORITY);
break;
case GPIO_IOC_OUT:
gpioioc.val = si_gpioout(gpio_sih, gpioioc.mask, gpioioc.val,
GPIO_APP_PRIORITY);
break;
case GPIO_IOC_OUTEN:
gpioioc.val = si_gpioouten(gpio_sih, gpioioc.mask, gpioioc.val,
GPIO_APP_PRIORITY);
break;
case GPIO_IOC_IN:
gpioioc.val = si_gpioin(gpio_sih);
break;
default:
break;
}
if (copy_to_user((struct gpio_ioctl *)arg, &gpioioc, sizeof(struct gpio_ioctl)))
return -EFAULT;
return 0;
}
static struct file_operations gpio_fops = {
owner: THIS_MODULE,
open: gpio_open,
release: gpio_release,
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)
unlocked_ioctl: gpio_ioctl
#else
ioctl: gpio_ioctl
#endif
};
static void
bcm947xx_reboot_handler(void)
{
if (lanports_enable) {
uint lp = 1 << lanports_enable;
si_gpioout(sih, lp, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, lp, lp, GPIO_DRV_PRIORITY);
bcm_mdelay(1);
}
/* gpio 0 is also valid wombo_reset */
if (wombo_reset != GPIO_PIN_NOTDEFINED) {
int reset = 1 << wombo_reset;
si_gpioout(sih, reset, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(10);
}
}
void leds_on(void)
{
uint32 mask = 1 << LED_WLAN2G_GPIO_PIN | 1 << LED_WLAN5G_GPIO_PIN | 1 << LED_INTERNET_GPIO_PIN | 1 << LED_SYS_GPIO_PIN;
if (sih == NULL)
{
xprintf("si attach failed\n");
return;
}
/*
* leds on
*/
si_gpioout(sih, mask, mask, GPIO_DRV_PRIORITY);
}
static void
bcm947xx_reboot_handler(void)
{
/* Reset the PCI(e) interfaces */
if (CHIPID(sih->chip) == BCM4706_CHIP_ID)
hndpci_deinit(sih);
if (lanports_enable) {
uint lp = 1 << lanports_enable;
si_gpioout(sih, lp, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, lp, lp, GPIO_DRV_PRIORITY);
bcm_mdelay(1);
}
/* gpio 0 is also valid wombo_reset */
if (wombo_reset != GPIO_PIN_NOTDEFINED) {
int reset = 1 << wombo_reset;
si_gpioout(sih, reset, 0, GPIO_DRV_PRIORITY);
si_gpioouten(sih, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(10);
}
}
/* Write a bit stream to the chip */
static void
adm_write(adm_info_t *adm, int cs, uint8 *buf, uint bits)
{
uint i, len = (bits + 7) / 8;
uint8 mask;
/* CS high/low */
if (cs)
si_gpioout(adm->sih, adm->eecs, adm->eecs, GPIO_DRV_PRIORITY);
else
si_gpioout(adm->sih, adm->eecs, 0, GPIO_DRV_PRIORITY);
OSL_DELAY(EECK_EDGE_TIME);
/* Byte assemble from MSB to LSB */
for (i = 0; i < len; i++) {
/* Bit bang from MSB to LSB */
for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) {
/* Clock low */
si_gpioout(adm->sih, adm->eesk, 0, GPIO_DRV_PRIORITY);
OSL_DELAY(EECK_EDGE_TIME);
/* Output on rising edge */
if (mask & buf[i])
si_gpioout(adm->sih, adm->eedi, adm->eedi, GPIO_DRV_PRIORITY);
else
si_gpioout(adm->sih, adm->eedi, 0, GPIO_DRV_PRIORITY);
OSL_DELAY(EEDI_SETUP_TIME);
/* Clock high */
si_gpioout(adm->sih, adm->eesk, adm->eesk, GPIO_DRV_PRIORITY);
OSL_DELAY(EECK_EDGE_TIME);
}
}
/* Clock low */
si_gpioout(adm->sih, adm->eesk, 0, GPIO_DRV_PRIORITY);
OSL_DELAY(EECK_EDGE_TIME);
/* CS low */
if (cs)
si_gpioout(adm->sih, adm->eecs, 0, GPIO_DRV_PRIORITY);
}
void leds_off(void)
{
/*
* keep system led on
*/
uint32 mask = 1 << LED_WLAN2G_GPIO_PIN | 1 << LED_WLAN5G_GPIO_PIN | 1 << LED_INTERNET_GPIO_PIN;
if (sih == NULL)
{
xprintf("si attach failed\n");
return;
}
/*
* leds off
*/
si_gpioout(sih, mask, ~mask, GPIO_DRV_PRIORITY);
}
void
board_power_init(si_t *sih)
{
uint origidx;
chipcregs_t *cc;
int gpio;
/* Drive gpio pin to HIGH to enable on-board switching regulator for COMA mode */
origidx = si_coreidx(sih);
if ((cc = (chipcregs_t *)si_setcore(sih, CC_CORE_ID, 0)) != NULL) {
gpio = getgpiopin(NULL, "coma_swreg", GPIO_PIN_NOTDEFINED);
if (gpio != GPIO_PIN_NOTDEFINED) {
gpio = 1 << gpio;
si_gpioout(sih, gpio, gpio, GPIO_DRV_PRIORITY);
si_gpioouten(sih, gpio, gpio, GPIO_DRV_PRIORITY);
}
}
si_setcoreidx(sih, origidx);
}
static int
gpio_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
struct gpio_ioctl gpioioc;
if (copy_from_user(&gpioioc, (struct gpio_ioctl *)arg, sizeof(struct gpio_ioctl)))
return -EFAULT;
switch (cmd) {
case GPIO_IOC_RESERVE:
gpioioc.val = si_gpioreserve(gpio_sih, gpioioc.mask, GPIO_APP_PRIORITY);
break;
case GPIO_IOC_RELEASE:
/*
* releasing the gpio doesn't change the current
* value on the GPIO last write value
* persists till some one overwrites it
*/
gpioioc.val = si_gpiorelease(gpio_sih, gpioioc.mask, GPIO_APP_PRIORITY);
break;
case GPIO_IOC_OUT:
gpioioc.val = si_gpioout(gpio_sih, gpioioc.mask, gpioioc.val,
GPIO_APP_PRIORITY);
break;
case GPIO_IOC_OUTEN:
gpioioc.val = si_gpioouten(gpio_sih, gpioioc.mask, gpioioc.val,
GPIO_APP_PRIORITY);
break;
case GPIO_IOC_IN:
gpioioc.val = si_gpioin(gpio_sih);
break;
default:
break;
}
if (copy_to_user((struct gpio_ioctl *)arg, &gpioioc, sizeof(struct gpio_ioctl)))
return -EFAULT;
return 0;
}
void gpio_set_value(unsigned int gpio, int value)
{
si_gpioout(gpio_sih, (1<<gpio), (value ? (1<<gpio) : 0), GPIO_APP_PRIORITY);
return;
}
void
board_pinmux_init(si_t *sih)
{
uint origidx;
chipcommonbregs_t *chipcb;
origidx = si_coreidx(sih);
chipcb = si_setcore(sih, NS_CCB_CORE_ID, 0);
if (chipcb != NULL) {
/* Default select the mux pins for GPIO */
W_REG(osh, &chipcb->cru_gpio_control0, 0x1fffff);
}
si_setcoreidx(sih, origidx);
si_gpioouten(sih, PWR_LED_GPIO, PWR_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioouten(sih, USB_LED_GPIO, USB_LED_GPIO, GPIO_DRV_PRIORITY);
#ifdef RTAC68U
si_gpioouten(sih, TURBO_LED_GPIO, TURBO_LED_GPIO, GPIO_DRV_PRIORITY);
#endif
#ifndef RTN18U
si_gpioouten(sih, WL5G_LED_GPIO, WL5G_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioouten(sih, USB3_LED_GPIO, USB3_LED_GPIO, GPIO_DRV_PRIORITY);
#endif
#ifndef RTAC68U
si_gpioouten(sih, WAN_LED_GPIO, WAN_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioouten(sih, LAN_LED_GPIO, LAN_LED_GPIO, GPIO_DRV_PRIORITY);
#endif
#ifndef RTN18U // for RT-AC56U & RT-AC68U
si_gpioouten(sih, USB_PWR1_GPIO, USB_PWR1_GPIO, GPIO_DRV_PRIORITY);
#ifndef RTAC68U
si_gpioouten(sih, USB_PWR2_GPIO, USB_PWR2_GPIO, GPIO_DRV_PRIORITY);
#endif
#endif
#ifdef RTN18U // RT-N18U
si_gpioouten(sih, USB_PWR1_GPIO, USB_PWR1_GPIO, GPIO_DRV_PRIORITY);
si_gpioouten(sih, WL2G_LED_GPIO, WL2G_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioouten(sih, USB3_LED_GPIO, USB3_LED_GPIO, GPIO_DRV_PRIORITY);
#endif
si_gpioout(sih, PWR_LED_GPIO, 0, GPIO_DRV_PRIORITY);
si_gpioout(sih, USB_LED_GPIO, USB_LED_GPIO, GPIO_DRV_PRIORITY);
#ifdef RTAC68U
si_gpioout(sih, TURBO_LED_GPIO, 0, GPIO_DRV_PRIORITY);
#endif
#ifndef RTN18U // for RT-AC56U & RT-AC68U to enable USB power
si_gpioout(sih, WL5G_LED_GPIO, WL5G_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioout(sih, USB3_LED_GPIO, USB3_LED_GPIO, GPIO_DRV_PRIORITY);
#endif
#ifndef RTAC68U
si_gpioout(sih, WAN_LED_GPIO, WAN_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioout(sih, LAN_LED_GPIO, LAN_LED_GPIO, GPIO_DRV_PRIORITY);
#endif
#ifndef RTN18U // for RT-AC56U & RT-AC68U to enable USB power
si_gpioout(sih, USB_PWR1_GPIO, USB_PWR1_GPIO, GPIO_DRV_PRIORITY);
#ifndef RTAC68U
si_gpioout(sih, USB_PWR2_GPIO, USB_PWR2_GPIO, GPIO_DRV_PRIORITY);
#endif
#endif
#ifdef RTN18U // RT-N18U
/* enable USB power */
si_gpioout(sih, USB_PWR1_GPIO, USB_PWR1_GPIO, GPIO_DRV_PRIORITY);
/* power on LEDs */
si_gpioout(sih, PWR_LED_GPIO, PWR_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioout(sih, WL2G_LED_GPIO, WL2G_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioout(sih, WAN_LED_GPIO, WAN_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioout(sih, LAN_LED_GPIO, LAN_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioout(sih, USB_LED_GPIO, USB_LED_GPIO, GPIO_DRV_PRIORITY);
si_gpioout(sih, USB3_LED_GPIO, USB3_LED_GPIO, GPIO_DRV_PRIORITY);
#endif
}
static int
bcmgpio_ioctl(int gpioreg, unsigned int mask , unsigned int val)
{
#if defined(__ECOS)
int value;
switch (gpioreg) {
case BCMGPIO_REG_IN:
value = si_gpioin(gpio_sih);
break;
case BCMGPIO_REG_OUT:
value = si_gpioout(gpio_sih, mask, val,GPIO_APP_PRIORITY);
break;
case BCMGPIO_REG_OUTEN:
value = si_gpioouten(gpio_sih, mask, val,GPIO_APP_PRIORITY);
break;
case BCMGPIO_REG_RESERVE:
value = si_gpioreserve(gpio_sih, mask, GPIO_APP_PRIORITY);
break;
case BCMGPIO_REG_RELEASE:
/*
* releasing the gpio doesn't change the current
* value on the GPIO last write value
* persists till some one overwrites it
*/
value = si_gpiorelease(gpio_sih, mask, GPIO_APP_PRIORITY);
break;
default:
GPIO_ERROR ("invalid gpioreg %d\n", gpioreg);
value = -1;
break;
}
return value;
#else
struct gpio_ioctl gpio;
int type;
gpio.val = val;
gpio.mask = mask;
switch (gpioreg) {
case BCMGPIO_REG_IN:
type = GPIO_IOC_IN;
break;
case BCMGPIO_REG_OUT:
type = GPIO_IOC_OUT;
break;
case BCMGPIO_REG_OUTEN:
type = GPIO_IOC_OUTEN;
break;
case BCMGPIO_REG_RESERVE:
type = GPIO_IOC_RESERVE;
break;
case BCMGPIO_REG_RELEASE:
type = GPIO_IOC_RELEASE;
break;
default:
GPIO_ERROR ("invalid gpioreg %d\n", gpioreg);
return -1;
}
if (ioctl(bcmgpio_fd, type, &gpio) < 0) {
GPIO_ERROR ("invalid gpioreg %d\n", gpioreg);
return -1;
}
return (gpio.val);
#endif
}
static int __init
gpio_init(void)
{
int i;
if (!(gpio_sih = si_kattach(SI_OSH)))
return -ENODEV;
si_gpiosetcore(gpio_sih);
if ((gpio_major = register_chrdev(127, "gpio", &gpio_fops)) < 0)
{
return gpio_major;
}
// devfs_mk_cdev(MKDEV(gpio_major, 0), S_IFCHR | S_IRUGO | S_IWUGO, "gpio");
// devfs_mk_dir("gpio");
gpio_class = class_create(THIS_MODULE, "gpio");
for (i = 0; i < ARRAYSIZE(gpio_file); i++) {
// register_chrdev(MKDEV(127, i), gpio_file[i].name, &gpio_fops);
class_device_create(gpio_class, NULL, MKDEV(127, i), NULL, gpio_file[i].name);
// printk("gpio dev %d created\n",dev);
// devfs_mk_cdev(MKDEV(127, i), S_IFCHR | S_IRUGO | S_IWUGO, gpio_file[i].name);
}
gpio_init_flag=1;
int gpios = 0;
if (iswrt350n)
{
printk(KERN_EMERG "WRT350N GPIO Init\n");
/* For WRT350N USB LED control */
si_gpioreserve(gpio_sih, 0x400, GPIO_HI_PRIORITY);
si_gpioouten(gpio_sih, 0x400, 0x400, GPIO_HI_PRIORITY);
si_gpioreserve(gpio_sih, 0x800, GPIO_HI_PRIORITY);
si_gpioouten(gpio_sih, 0x800, 0x800, GPIO_HI_PRIORITY);
//if (nvram_match("disabled_5397", "1")) {
// printk("5397 switch GPIO-Reset \n");
//}
USB_SET_LED(USB_DISCONNECT); //2005-02-24 by kanki for USB LED
}
if (iswrt350n)
{
si_gpioreserve(gpio_sih, 0x4, GPIO_HI_PRIORITY);
si_gpioouten(gpio_sih, 0x4, 0x4, GPIO_HI_PRIORITY);
si_gpioout(gpio_sih, 0x4, 0x4, GPIO_HI_PRIORITY);
}
uint boardnum = bcm_strtoul( nvram_safe_get( "boardnum" ), NULL, 0 );
gpios = 1<<0 | 1<<1 | 1<<2 | 1<<3 | 1<<4 | 1<<5 | 1<<6 | 1<<7 | 1<<8 | 1<<9 | 1<<10 | 1<<11;
if ((boardnum == 1 || boardnum == 3500)
&& nvram_match("boardtype", "0x04CF")
&& (nvram_match("boardrev", "0x1213") || nvram_match("boardrev", "02")))
{
printk(KERN_EMERG "WNR3500V2 GPIO Init\n");
gpios = 1 << 1 | 1 << 2 | 1 << 3 | 1 << 7;
}
if ((boardnum == 42 || boardnum == 66)
&& nvram_match("boardtype", "0x04EF")
&& (nvram_match("boardrev", "0x1304") || nvram_match("boardrev", "0x1305") || nvram_match("boardrev", "0x1307")))
{
printk(KERN_EMERG "WRT320N/E2000 GPIO Init\n");
gpios = 1 << 2 | 1 << 3 | 1 << 4;
}
if (boardnum == 42 && ((nvram_match("boot_hw_model", "WRT160N") && nvram_match("boot_hw_ver", "3.0"))
|| (nvram_match("boot_hw_model", "M10") && nvram_match("boot_hw_ver", "1.0"))
|| (nvram_match("boot_hw_model", "E100") && nvram_match("boot_hw_ver", "1.0")) ) )
{
printk(KERN_EMERG "WRT160Nv3/M10/E1000 GPIO Init\n");
gpios = 1 << 1 | 1 << 2 | 1 << 4;
}
if (boardnum == 42 && ((nvram_match("boot_hw_model", "WRT310N") && nvram_match("boot_hw_ver", "2.0"))
|| (nvram_match("boot_hw_model", "M20") && nvram_match("boot_hw_ver", "1.0")) ) )
{
printk(KERN_EMERG "WRT310Nv2/M20 GPIO Init\n");
gpios = 1 << 1 | 1 << 2 | 1 << 4;
}
if (nvram_match("boardnum", "00") && nvram_match("boardrev", "0x11")
&& nvram_match("boardtype", "0x048e")
&& (nvram_match("melco_id", "32093") || nvram_match("melco_id", "32064")))
{
printk(KERN_EMERG "WHR-G125 / WHR-HP-G125 GPIO Init\n");
gpios = 1 << 1 | 1 << 6 | 1 << 7;
}
if (nvram_match("boardnum", "00") && nvram_match("boardrev", "0x13")
&& nvram_match("boardtype", "0x467"))
{
printk(KERN_EMERG "WHR-G54S / WHR-HP-G54 GPIO Init\n");
gpios = 1 << 1 | 1 << 6 | 1 << 7;
}
if (nvram_match("boardtype", "0x04cf") && (nvram_match("boot_hw_model", "WRT610N")
|| nvram_match("boot_hw_model", "E300")))
{
printk(KERN_EMERG "WRT610Nv2/E3000 GPIO Init\n");
gpios = 1 << 0 | 1 << 3 | 1 << 5 | 1 << 7;
}
if (boardnum == 42 && nvram_match("boardrev", "0x10")
&& (nvram_match("boardtype", "0x0467")
|| nvram_match("boardtype", "0x0708")
|| nvram_match("boardtype", "0x0101")))
{
printk(KERN_EMERG "WRT54G/GS/GL/TM GPIO Init\n");
gpios = 1 << 1 | 1 << 2 | 1 << 3 | 1 << 4 | 1 << 7;
}
if (boardnum == 45 && nvram_match("boardrev", "0x1402")
&& nvram_match("boardtype", "0x04EC"))
{
printk(KERN_EMERG "RT-N10 GPIO Init\n");
gpios = 1 << 1;
}
if (boardnum == 45 && nvram_match("boardrev", "0x1102")
&& nvram_match("boardtype", "0x0550"))
{
printk(KERN_EMERG "RT-N10U GPIO Init\n");
gpios = 1 << 5;
}
if (boardnum == 45 && nvram_match("boardrev", "0x1153")
&& nvram_match("boardtype", "0x058e"))
{
printk(KERN_EMERG "RT-N10+ D1 GPIO INIT\n");
gpios = 1 << 6 | 1 << 7 | 1 << 21 | 1 << 20;
}
if (boardnum == 1 && nvram_match("boardtype", "0xE4CD")
&& nvram_match("boardrev", "0x1700"))
{
printk(KERN_EMERG "WNR2000v2 GPIO Init\n");
gpios = 1 << 2 | 1 << 6 | 1 << 7 | 1 << 8;
}
if (boardnum == 45 && nvram_match("boardrev", "0x1201")
&& nvram_match("boardtype", "0x04CD"))
{
printk(KERN_EMERG "RT-N12 GPIO Init\n");
gpios = 1 << 0 | 1 << 2;
}
if (boardnum == 45 && nvram_match("boardrev", "0x1218")
&& nvram_match("boardtype", "0x04cf"))
{
printk(KERN_EMERG "RT-N16 GPIO Init\n");
gpios = 1 << 1;
}
if (boardnum == 1 && nvram_match("boardrev", "0x23")
&& nvram_match("boardtype", "0x0472"))
{
if (nvram_match("cardbus", "1")) {
printk(KERN_EMERG "WNR324v2 GPIO Init\n");
gpios = 1 << 2 | 1 << 3 | 1 << 7;
} else {
printk(KERN_EMERG "WNDR3300 GPIO Init\n");
gpios = 1 << 5 | 1 << 7;
}
}
if (nvram_match("boardnum", "00") && nvram_match("boardtype", "0x0101")
&& nvram_match("boardrev", "0x10"))
{
printk(KERN_EMERG "WBR2-G54(S) GPIO Init\n");
gpios = 1 << 1 | 1 << 6;
}
if (nvram_match("boardtype", "0xd4cf")
&& nvram_match("boardrev", "0x1204"))
{
printk(KERN_EMERG "F7D4301v1 GPIO Init\n");
gpios = 1 << 10 | 1 << 11 | 1 << 13;
}
if (nvram_match("boardtype", "0xa4cf")
&& (nvram_match("boardrev", "0x1100") || nvram_match("boardrev", "0x1102")))
{
printk(KERN_EMERG "F7D3301v1/3302v1/4302v1 - F5D8235v3 GPIO Init\n");
gpios = 1 << 10 | 1 << 11 | 1 << 13;
}
if (nvram_match("boot_hw_model", "E1000")
&& (nvram_match("boot_hw_ver", "2.0") || nvram_match("boot_hw_ver", "2.1")))
{
printk(KERN_EMERG "E1000v2/v21 GPIO Init\n");
gpios = 1 << 6 | 1 << 7 | 1 << 8;
}
if (nvram_match("boot_hw_model", "E4200")
&& nvram_match("boot_hw_ver", "1.0"))
{
printk(KERN_EMERG "E4200 GPIO Init\n");
gpios = 1 << 3 | 1 << 5;
}
if (nvram_match("boardnum", "01") && nvram_match("boardtype", "0xb4cf")
&& nvram_match("boardrev", "0x1100"))
{
printk(KERN_EMERG "WNDR3400 GPIO Init\n");
gpios = 1 << 0 | 1 << 1 | 1 << 2 | 1 << 3 | 1 << 7;
}
if (nvram_match("boardnum", "01") && nvram_match("boardtype", "0xF52C")
&& nvram_match("boardrev", "0x1101"))
{
printk(KERN_EMERG "WNDR4000 GPIO Init\n");
gpios = 1 << 0 | 1 << 6 | 1 << 7;
}
/*if (iswrt300n11)
{
printk(KERN_EMERG "WRT300N v1.1 GPIO Init\n");
int reset = 1 << 8;
sb_gpioout(gpio_sbh, reset, 0, GPIO_DRV_PRIORITY);
sb_gpioouten(gpio_sbh, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(50);
sb_gpioout(gpio_sbh, reset, reset, GPIO_DRV_PRIORITY);
bcm_mdelay(20);
}*/
for (i = 0; i < 16; i++)
{
if (gpios&1) {
si_gpioreserve(gpio_sih, 1 << i, GPIO_APP_PRIORITY);
}
gpios>>=1;
}
return 0;
}
