Esempi in C++ (Cpp) per slimport_edid_proc

Esempio n. 1

File: slimport.c Progetto: MrJwiz/UBER-M

static void slimport_main_proc(struct anx7808_data *anx7808)
{
	mutex_lock(&anx7808->lock);

	if (!sp_tx_pd_mode) {
		sp_tx_int_irq_handler();
		hdmi_rx_int_irq_handler();
	}

	if (sp_tx_system_state == STATE_CABLE_PLUG)
		slimport_cable_plug_proc(anx7808);

	if (sp_tx_system_state == STATE_PARSE_EDID)
		slimport_edid_proc();

	if (anx7808->update_chg_type && !sp_tx_pd_mode) {
		sp_tx_chg_current_ma = sp_tx_get_chg_current();
		anx7808->update_chg_type = false;
		complete_all(&init_aux_ch_completion);
	}

	if (sp_tx_system_state == STATE_CONFIG_HDMI)
		sp_tx_config_hdmi_input();

	if (sp_tx_system_state == STATE_LINK_TRAINING) {
		if (!sp_tx_lt_pre_config())
			sp_tx_hw_link_training();
	}

	if (sp_tx_system_state == STATE_CONFIG_OUTPUT)
		slimport_config_output();

	if (sp_tx_system_state == STATE_HDCP_AUTH) {
		if (hdcp_enable) {
			sp_tx_hdcp_process();
		} else {
			sp_tx_power_down(SP_TX_PWR_HDCP);
			sp_tx_video_mute(0);
			hdmi_rx_show_video_info();
			sp_tx_show_infomation();
			sp_tx_set_sys_state(STATE_PLAY_BACK);
		}
	}

	if (sp_tx_system_state == STATE_PLAY_BACK)
		slimport_playback_proc();

	mutex_unlock(&anx7808->lock);
}

Esempio n. 2

File: slimport.c Progetto: Solitarily/jolla-kernel-Stock_KK

static void slimport_main_proc(struct anx7808_data *anx7808)
{
	mutex_lock(&anx7808->lock);

	if (!sp_tx_pd_mode) {
		sp_tx_int_irq_handler();
		hdmi_rx_int_irq_handler();
	}

	if (sp_tx_system_state == STATE_CABLE_PLUG)
		slimport_cable_plug_proc(anx7808);

	if (sp_tx_system_state == STATE_PARSE_EDID)
		slimport_edid_proc();

	if (sp_tx_system_state == STATE_CONFIG_HDMI)
		sp_tx_config_hdmi_input();

	if (sp_tx_system_state == STATE_LINK_TRAINING) {
		if (!sp_tx_lt_pre_config())
			sp_tx_hw_link_training();
	}

	if (sp_tx_system_state == STATE_CONFIG_OUTPUT)
		slimport_config_output();

	if (sp_tx_system_state == STATE_HDCP_AUTH) {
		if (hdcp_enable) {
			sp_tx_hdcp_process();
		} else {
			sp_tx_power_down(SP_TX_PWR_HDCP);
			sp_tx_video_mute(0);
			sp_tx_show_infomation();
			sp_tx_set_sys_state(STATE_PLAY_BACK);
		}
	}

	if (sp_tx_system_state == STATE_PLAY_BACK)
		slimport_playback_proc();

#ifdef CONFIG_CHARGER_SMB345
	slimport_cable_monitor(anx7808);
#endif

	mutex_unlock(&anx7808->lock);
}

Esempio n. 3

File: slimport.c Progetto: joutcast/ASUS_A80_source

static void slimport_main_proc(struct anx7808_data *anx7808)
{
//unchar c1, c2;
///printk("=================slimport_main_proc================\n");
	mutex_lock(&anx7808->lock);
	//ASUS BSP Wei Lai +++
	//sp_tx_chip_located();
///printk("(1) slimport_main_proc \n");


	//sp_tx_hardware_poweron(anx7808_client);
	//msleep(200);
	//ASUS BSP Wei Lai ---
	if (!sp_tx_pd_mode) {
///		printk("(1-1)slimport_main_proc \n");
		
		sp_tx_int_irq_handler();
		hdmi_rx_int_irq_handler();
///		printk("(1-2)slimport_main_proc \n");

	}
	//sp_tx_hardware_chip_enable(anx7808_client);

//printk("=================slimport_main_proc END================\n");
///printk("(2)slimport_main_proc \n");
	if (sp_tx_system_state == STATE_CABLE_PLUG)
		slimport_cable_plug_proc(anx7808);
///printk("(3)slimport_main_proc \n");
	if (sp_tx_system_state == STATE_PARSE_EDID)
		slimport_edid_proc();
//ANX +++: (ver0.4)
	if (sp_tx_system_state == STATE_CONFIG_HDMI) {
// 		if((sp_tx_asus_pad) && (!myDP_DP_Dongle)) 
 		if(sp_tx_asus_pad) 
		{
			int try_count= 50;
			while (try_count) {
				if (!sp_tx_config_hdmi_input())
					break;
				else	
					msleep(20);
				try_count --;
			};

			printk("[myDP] try_count = %d\n", try_count);
			
			if ( (!check_mdp4_dtv() || !try_count) && (g_slimport_bypass_check_mdp4) )
			{
				printk("[myDP] after check RX input, still TMDS not ready, go link , then power down\n");
				sp_tx_set_sys_state(STATE_LINK_TRAINING);
				
			}
			else
			{
				printk("[myDP] TMDS ready, go to next process\n");			
				g_slimport_bypass_check_mdp4 = 1;
			}
			if (sp_tx_system_state == STATE_LINK_TRAINING)
				sp_tx_sw_error_power_down();						
			else	
				sp_tx_config_hdmi_pad();
		}
		else 
		{
			if (sp_tx_rx_type == RX_VGA)
			{
				// check need under 480p
				if (myDP_check_7808_rx_under_480p())					
				{
					sp_tx_config_hdmi_input();
				}
			}
			else
			{
				sp_tx_config_hdmi_input();
			}
		}
	}
	if (sp_tx_system_state == STATE_LINK_TRAINING) {
		if (!sp_tx_asus_pad) {
			if (!sp_tx_lt_pre_config())
				sp_tx_hw_link_training();
		}
		else
		{// pad mode not do link training, so power down chip
			sp_tx_sw_error_power_down();			
		}
	}
//ANX ---: (ver0.4)
//printk("=================slimport_main_proc================\n");
//printk("=================slimport_main_proc END================\n");
	if (sp_tx_system_state == STATE_CONFIG_OUTPUT)
		slimport_config_output();

	if (sp_tx_system_state == STATE_HDCP_AUTH) {
		if (hdcp_enable && 
			((sp_tx_rx_type == RX_HDMI) ||
			( sp_tx_rx_type ==RX_DP) || ( sp_tx_rx_type ==RX_VGA)) ) {
//ANX +++: (ver:20130105) pad solution			
//			if((sp_tx_asus_pad) && (!myDP_DP_Dongle))
			if(sp_tx_asus_pad)
				sp_tx_sw_hdcp_process();
			else
				sp_tx_hdcp_process();
//ANX ---: (ver:20130105) pad solution
		} else {
			sp_tx_power_down(SP_TX_PWR_HDCP);
			sp_tx_video_mute(0);
			sp_tx_show_infomation();
			sp_tx_set_sys_state(STATE_PLAY_BACK);
		}
	}

	if (sp_tx_system_state == STATE_PLAY_BACK)
		slimport_playback_proc();
		//ASUS BSP Wei Lai +++
	//sp_tx_hardware_powerdown(anx7808_client);
		//ASUS BSP Wei Lai ---
	mutex_unlock(&anx7808->lock);
///		printk("=================slimport_main_proc END================\n");
}