/*-----------------------------------------------------------------------------------*/
void
sec_arp_init(void)
{
uint8_t sum, i;
uint8_t temp_buf[KEY_SIZE*3];
/* Read security data from Flash mem */
xmem_pread(temp_buf, (KEY_SIZE*3), MAC_SECURITY_DATA);
/* Check if we have a network key */
sum = 0;
for(i=KEY_SIZE; i>0; i--) {sum |= temp_buf[i-1];}
if(!(sum)) {
/* Init slip connection */
slip_arch_init(BAUD2UBR(115200));
PRINTF("sec-arp: Start slip process\n");
process_start(&slip_process, NULL);
slip_set_input_callback(slip_input_callback);
/* Send hello packet */
create_hello();
} else {
PRINTF("sec-arp: Key OK\n");
#if DEBUG
PRINTF("sec-arp: buf ");
for(i=0; i<(KEY_SIZE*3); i++) PRINTF("%02x ", temp_buf[i]);
PRINTF("\n");
#endif
/* Set security data */
set_security_data(temp_buf);
}
}
/*---------------------------------------------------------------------------*/
static void
slip_init(void)
{
slip_arch_init(BAUD2UBR(115200));
process_start(&slip_process, NULL);
slip_set_input_callback(slip_input_callback);
PRINTF("slip init\n");
}
void
slipnet_init(void)
{
tcpip_set_outputfunc(tip_output);
slip_set_input_callback(slip_input_call);
slip_arch_init(115200);
process_start(&slip_process, NULL);
}
/*---------------------------------------------------------------------------*/
static void
init(void)
{
#ifndef BAUD2UBR
#define BAUD2UBR(baud) baud
#endif
slip_arch_init(BAUD2UBR(115200));
process_start(&slip_process, NULL);
slip_set_input_callback(slip_input_callback);
packet_pos = 0;
}
/*---------------------------------------------------------------------------*/
void
init_usart(void)
{
/* First rs232 port for debugging */
rs232_init(RS232_PORT_0, USART_BAUD_115200,
USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
#if WITH_UIP || WITH_UIP6
slip_arch_init(USART_BAUD_115200);
#else
rs232_redirect_stdout(RS232_PORT_0);
#endif /* WITH_UIP */
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(uip6_bridge, ev, data)
{
PROCESS_BEGIN();
printf("Setting up SLIP\n");
mac_ethernetSetup();
slip_arch_init(BAUD2UBR(115200));
slip_set_input_callback(slip_activity);
slip_set_tcpip_input_callback(slip_tcpip_input);
process_start(&slip_process, NULL);
PROCESS_END();
}
void
init_lowlevel(void)
{
rs232_init(USART_PORT, USART_BAUD,
USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
#if WITH_UIP || WITH_UIP6
/* Initialise SPLIP on USART port */
slip_arch_init(SLIP_BAUD);
#else
/* Redirect stdout and stdin to USART port */
rs232_redirect_stdout(USART_PORT);
rs232_set_input(USART_PORT, serial_line_input_byte);
#endif
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
clock_wait(100);
uart0_init(BAUD2UBR(115200)); /* Must come before first printf */
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200));
#endif /* WITH_UIP */
xmem_init();
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
node_id_restore();
/* If no MAC address was burned, we use the node ID. */
if(node_mac[0] | node_mac[1] | node_mac[2] | node_mac[3] |
node_mac[4] | node_mac[5] | node_mac[6] | node_mac[7]) {
node_mac[0] = 0xc1; /* Hardcoded for Z1 */
node_mac[1] = 0x0c; /* Hardcoded for Revision C */
node_mac[2] = 0x00; /* Hardcoded to arbitrary even number so that
the 802.15.4 MAC address is compatible with
an Ethernet MAC address - byte 0 (byte 2 in
the DS ID) */
node_mac[3] = 0x00; /* Hardcoded */
node_mac[4] = 0x00; /* Hardcoded */
node_mac[5] = 0x00; /* Hardcoded */
node_mac[6] = node_id >> 8;
node_mac[7] = node_id & 0xff;
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(uip6_bridge, ev, data)
{
PROCESS_BEGIN();
printf("Setting up SLIP\n");
{
short i;
for(i=0;i<5;i++){
leds_blink();
clock_wait(100);
}
}
mac_ethernetSetup();
slip_arch_init(115200);
slip_set_tcpip_input_callback(slip_tcpip_input);
process_start(&slip_process, NULL);
PROCESS_END();
}
/*--------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
leds_on(LEDS_GREEN);
/* xmem_init(); */
rtimer_init();
lcd_init();
watchdog_init();
PRINTF(CONTIKI_VERSION_STRING "\n");
/* PRINTF("Compiled at %s, %s\n", __TIME__, __DATE__);*/
/*
* Hardware initialization done!
*/
leds_on(LEDS_RED);
/* Restore node id if such has been stored in external mem */
#ifdef NODEID
node_id = NODEID;
#ifdef BURN_NODEID
node_id_burn(node_id);
node_id_restore(); /* also configures node_mac[] */
#endif /* BURN_NODEID */
#else
node_id_restore(); /* also configures node_mac[] */
#endif /* NODE_ID */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef MAC_1
{
uint8_t ieee[] = { MAC_1, MAC_2, MAC_3, MAC_4, MAC_5, MAC_6, MAC_7, MAC_8 };
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
}
#endif
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
random_init(node_id);
NETSTACK_RADIO.init();
#if CC11xx_CC1101 || CC11xx_CC1120
printf("Starting up cc11xx radio at channel %d\n", RF_CHANNEL);
cc11xx_channel_set(RF_CHANNEL);
#endif /* CC11xx_CC1101 || CC11xx_CC1120 */
#if CONFIGURE_CC2420 || CONFIGURE_CC2520
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (rimeaddr_node_addr.u8[0] << 8) + rimeaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
rimeaddr_copy((rimeaddr_t *)&longaddr, &rimeaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", longaddr[0],
longaddr[1], longaddr[2], longaddr[3], longaddr[4], longaddr[5],
longaddr[6], longaddr[7]);
#if CONFIGURE_CC2420
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
#endif /* CONFIGURE_CC2420 */
#if CONFIGURE_CC2520
cc2520_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
#endif /* CONFIGURE_CC2520 */
}
#if CONFIGURE_CC2420
cc2420_set_channel(RF_CHANNEL);
#endif /* CONFIGURE_CC2420 */
#if CONFIGURE_CC2520
cc2520_set_channel(RF_CHANNEL);
#endif /* CONFIGURE_CC2520 */
#endif /* CONFIGURE_CC2420 || CONFIGURE_CC2520 */
NETSTACK_RADIO.on();
leds_off(LEDS_ALL);
if(node_id > 0) {
PRINTF("Node id %u.\n", node_id);
} else {
PRINTF("Node id not set.\n");
}
#if WITH_UIP6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
queuebuf_init();
netstack_init();
printf("%s/%s %lu %u\n",
NETSTACK_RDC.name,
NETSTACK_MAC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("IPv6 ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(1) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xfc00, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* WITH_UIP6 */
netstack_init();
printf("%s %lu %u\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#ifdef NETSTACK_AES_H
#ifndef NETSTACK_AES_KEY
#error Please define NETSTACK_AES_KEY!
#endif /* NETSTACK_AES_KEY */
{
const uint8_t key[] = NETSTACK_AES_KEY;
netstack_aes_set_key(key);
}
/*printf("AES encryption is enabled: '%s'\n", NETSTACK_AES_KEY);*/
printf("AES encryption is enabled\n");
#else /* NETSTACK_AES_H */
printf("Warning: AES encryption is disabled\n");
#endif /* NETSTACK_AES_H */
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(rimeaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
#if CC11xx_CC1101 || CC11xx_CC1120
printf("cc11xx radio at channel %d\n", RF_CHANNEL);
cc11xx_channel_set(RF_CHANNEL);
#endif /* CC11xx_CC1101 || CC11xx_CC1120 */
#if CONFIGURE_CC2420
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (rimeaddr_node_addr.u8[0] << 8) +
rimeaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
rimeaddr_copy((rimeaddr_t *)&longaddr, &rimeaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
cc2420_set_channel(RF_CHANNEL);
#endif /* CONFIGURE_CC2420 */
NETSTACK_RADIO.on();
/* process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(button_sensor);*/
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
simple_rpl_init();
watchdog_start();
print_processes(autostart_processes);
autostart_start(autostart_processes);
duty_cycle_scroller_start(CLOCK_SECOND * 2);
#if IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP && WITH_SLIP
/* Start the SLIP */
printf("Initiating SLIP: my IP is 172.16.0.2...\n");
slip_arch_init(0);
{
uip_ip4addr_t ipv4addr, netmask;
uip_ipaddr(&ipv4addr, 172, 16, 0, 2);
uip_ipaddr(&netmask, 255, 255, 255, 0);
ip64_set_ipv4_address(&ipv4addr, &netmask);
}
uart1_set_input(slip_input_byte);
#endif /* IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP */
/*
* This is the scheduler loop.
*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
}
/*--------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(BAUD2UBR(115200));
#endif /* NETSTACK_CONF_WITH_IPV4 */
leds_on(LEDS_GREEN);
/* xmem_init(); */
rtimer_init();
lcd_init();
PRINTF(CONTIKI_VERSION_STRING "\n");
/*
* Hardware initialization done!
*/
leds_on(LEDS_RED);
/* Restore node id if such has been stored in external mem */
// node_id_restore();
#ifdef NODEID
node_id = NODEID;
#ifdef BURN_NODEID
flash_setup();
flash_clear(0x1800);
flash_write(0x1800, node_id);
flash_done();
#endif /* BURN_NODEID */
#endif /* NODE_ID */
if(node_id == 0) {
node_id = *((unsigned short *)0x1800);
}
memset(node_mac, 0, sizeof(node_mac));
node_mac[6] = node_id >> 8;
node_mac[7] = node_id & 0xff;
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef MAC_1
{
uint8_t ieee[] = { MAC_1, MAC_2, MAC_3, MAC_4, MAC_5, MAC_6, MAC_7, MAC_8 };
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
}
#endif
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
cc2420_init();
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (linkaddr_node_addr.u8[0] << 8) +
linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
leds_off(LEDS_ALL);
if(node_id > 0) {
PRINTF("Node id %u.\n", node_id);
} else {
PRINTF("Node id not set.\n");
}
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %lu %u\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("IPv6 ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* NETSTACK_CONF_WITH_IPV6 */
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %lu %u\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#if !NETSTACK_CONF_WITH_IPV6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(linkaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
/* process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(button_sensor);*/
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
print_processes(autostart_processes);
autostart_start(autostart_processes);
duty_cycle_scroller_start(CLOCK_SECOND * 2);
/*
* This is the scheduler loop.
*/
watchdog_start();
watchdog_stop(); /* Stop the wdt... */
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
}
}
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
clock_wait(100);
uart0_init(BAUD2UBR(UART0_BAUD_RATE)); /* Must come before first printf */
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(BAUD2UBR(UART0_BAUD_RATE));
#endif /* NETSTACK_CONF_WITH_IPV4 */
xmem_init();
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
node_id_restore();
/* If no MAC address was burned, we use the node id or the Z1 product ID */
if(!(node_mac[0] | node_mac[1] | node_mac[2] | node_mac[3] |
node_mac[4] | node_mac[5] | node_mac[6] | node_mac[7])) {
#ifdef SERIALNUM
if(!node_id) {
PRINTF("Node id is not set, using Z1 product ID\n");
node_id = SERIALNUM;
}
#endif
node_mac[0] = 0xc1; /* Hardcoded for Z1 */
node_mac[1] = 0x0c; /* Hardcoded for Revision C */
node_mac[2] = 0x00; /* Hardcoded to arbitrary even number so that
the 802.15.4 MAC address is compatible with
an Ethernet MAC address - byte 0 (byte 2 in
the DS ID) */
node_mac[3] = 0x00; /* Hardcoded */
node_mac[4] = 0x00; /* Hardcoded */
node_mac[5] = 0x00; /* Hardcoded */
node_mac[6] = node_id >> 8;
node_mac[7] = node_id & 0xff;
}
/* Overwrite node MAC if desired at compile time */
#ifdef MACID
#warning "***** CHANGING DEFAULT MAC *****"
node_mac[0] = 0xc1; /* Hardcoded for Z1 */
node_mac[1] = 0x0c; /* Hardcoded for Revision C */
node_mac[2] = 0x00; /* Hardcoded to arbitrary even number so that
the 802.15.4 MAC address is compatible with
an Ethernet MAC address - byte 0 (byte 2 in
the DS ID) */
node_mac[3] = 0x00; /* Hardcoded */
node_mac[4] = 0x00; /* Hardcoded */
node_mac[5] = 0x00; /* Hardcoded */
node_mac[6] = MACID >> 8;
node_mac[7] = MACID & 0xff;
#endif
#ifdef IEEE_802154_MAC_ADDRESS
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
node_mac[7] = node_id & 0xff;
}
#endif /* IEEE_802154_MAC_ADDRESS */
/*
* Initialize Contiki and our processes.
*/
random_init(node_mac[6] + node_mac[7]);
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
init_platform();
set_rime_addr();
cc2420_init();
SENSORS_ACTIVATE(adxl345);
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (linkaddr_node_addr.u8[0] << 8) +
linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
leds_off(LEDS_ALL);
#ifdef SERIALNUM
PRINTF("Ref ID: %u\n", SERIALNUM);
#endif
PRINTF(CONTIKI_VERSION_STRING " started. ");
if(node_id) {
PRINTF("Node id is set to %u.\n", node_id);
} else {
PRINTF("Node id not set\n");
}
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
/* sicslowpan_init(sicslowmac_init(&cc2420_driver)); */
/* printf(" %s channel %u\n", sicslowmac_driver.name, CC2420_CONF_CHANNEL); */
/* Setup X-MAC for 802.15.4 */
queuebuf_init();
netstack_init();
// NETSTACK_RDC.init();
// NETSTACK_MAC.init();
// NETSTACK_LLSEC.init();
// NETSTACK_NETWORK.init();
printf("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* NETSTACK_CONF_WITH_IPV6 */
netstack_init();
//NETSTACK_RDC.init();
//NETSTACK_MAC.init();
//NETSTACK_LLSEC.init();
//NETSTACK_NETWORK.init();
printf("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
leds_off(LEDS_GREEN);
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(linkaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
#if NETSTACK_CONF_WITH_IPV4
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172, 16,
linkaddr_node_addr.u8[0], linkaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255, 255, 0, 0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
printf("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* NETSTACK_CONF_WITH_IPV4 */
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
print_processes(autostart_processes);
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
#if DCOSYNCH_CONF_ENABLED
timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
watchdog_start();
/* watchdog_stop();*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart0_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart0_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
#if DCOSYNCH_CONF_ENABLED
/* before going down to sleep possibly do some management */
if(timer_expired(&mgt_timer)) {
timer_reset(&mgt_timer);
msp430_sync_dco();
}
#endif
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
}
}
return 0;
}
int
main(void)
{
#if WITH_SD
int r;
#endif /* WITH_SD */
msp430_cpu_init();
watchdog_stop();
/* Platform-specific initialization. */
msb_ports_init();
adc_init();
clock_init();
rtimer_init();
sht11_init();
leds_init();
leds_on(LEDS_ALL);
irq_init();
process_init();
/* serial interface */
rs232_set_input(serial_line_input_byte);
rs232_init();
serial_line_init();
uart_lock(UART_MODE_RS232);
uart_unlock(UART_MODE_RS232);
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200));
#endif
#if WITH_SD
r = sd_initialize();
if(r < 0) {
printf("Failed to initialize the SD driver: %s\n", sd_error_string(r));
} else {
sd_offset_t capacity;
printf("The SD driver was successfully initialized\n");
capacity = sd_get_capacity();
if(capacity < 0) {
printf("Failed to get the SD card capacity: %s\n", sd_error_string(r));
} else {
printf("SD card capacity: %u MB\n",
(unsigned)(capacity / (1024UL * 1024)));
}
}
#endif
/* System services */
process_start(&etimer_process, NULL);
ctimer_init();
node_id_restore();
init_net();
energest_init();
#if PROFILE_CONF_ON
profile_init();
#endif /* PROFILE_CONF_ON */
leds_off(LEDS_ALL);
printf(CONTIKI_VERSION_STRING " started. Node id %u, using %s.\n",
node_id, rime_mac->name);
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
ENERGEST_ON(ENERGEST_TYPE_CPU);
while (1) {
int r;
#if PROFILE_CONF_ON
profile_episode_start();
#endif /* PROFILE_CONF_ON */
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
#if PROFILE_CONF_ON
profile_episode_end();
#endif /* PROFILE_CONF_ON */
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
if (process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/*
* We only want to measure the processing done in IRQs when we
* are asleep, so we discard the processing time done when we
* were awake.
*/
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
if (uart_edge) {
_BIC_SR(LPM1_bits + GIE);
} else {
_BIS_SR(LPM1_bits + GIE);
}
/*
* We get the current processing time for interrupts that was
* done during the LPM and store it for next time around.
*/
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
#if PROFILE_CONF_ON
profile_clear_timestamps();
#endif /* PROFILE_CONF_ON */
}
}
return 0;
}
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_toggle(LEDS_ALL);
slip_arch_init(BAUD2UBR(115200)); /* Must come before first printf */
printf("Starting %s "
"($Id: dhclient.c,v 1.1 2008/05/27 13:16:34 adamdunkels Exp $)\n", __FILE__);
ds2411_init();
sensors_light_init();
cc2420_init();
xmem_init();
button_init(&button_process);
leds_toggle(LEDS_ALL);
/*
* Hardware initialization done!
*/
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x CHANNEL %d\n",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7],
RF_CHANNEL);
srand(rand() +
(ds2411_id[3]<<8) + (ds2411_id[4]<<6) + (ds2411_id[5]<<4) +
(ds2411_id[6]<<2) + ds2411_id[7]);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
/* Configure IP stack. */
uip_init();
/* Start IP stack. */
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&cc2420_process, NULL);
cc2420_on();
process_start(&dhclient_process, NULL);
process_start(&button_process, NULL);
process_start(&tcp_loader_process, NULL);
/*
* This is the scheduler loop.
*/
printf("process_run()...\n");
while (1) {
do {
/* Reset watchdog. */
} while(process_run() > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
if(process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
/* Re-enable interrupts and go to sleep atomically. */
_BIS_SR(GIE | SCG0 | CPUOFF); /* LPM1 sleep. */
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
int main()
{
static uint32_t idle_count = 0;
/*
* OpenLab Platform init
*
*/
platform_init();
/*
* Contiki core
*
*/
clock_init();
process_init();
rtimer_init();
process_start(&etimer_process, NULL);
ctimer_init();
/*
* Sensors
*
* registered sensors: button
*
* TODO: add lsm303dlhc + l3g4200 + lps331
*/
process_start(&sensors_process, NULL);
/*
* Network
*
*/
netstack_init();
set_rime_addr();
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
process_start(&tcpip_process, NULL);
#if VIZTOOL_CONF_ON
process_start(&viztool_process, NULL);
#endif
#if (!UIP_CONF_IPV6_RPL)
{
uip_ipaddr_t ipaddr;
uip_ip6addr(&ipaddr, 0x2001, 0x630, 0x301, 0x6453, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
}
#endif /* UIP_CONF_IPV6_RPL */
#endif /* UIP_CONF_IPV6 */
/*
* init serial line
*/
serial_line_init();
uart_set_rx_handler(uart_print, char_rx, NULL);
/*
* eventually init slip device
* wich may override serial line
*/
#if SLIP_ARCH_CONF_ENABLE
#ifndef UIP_CONF_LLH_LEN
#error "LLH_LEN is not defined"
#elif UIP_CONF_LLH_LEN != 0
#error "LLH_LEN must be 0 to use slip interface"
#endif
slip_arch_init(SLIP_ARCH_CONF_BAUDRATE);
#endif
/*
* Start
*/
print_processes(autostart_processes);
autostart_start(autostart_processes);
watchdog_start();
while(1)
{
int r;
do
{
watchdog_periodic();
r = process_run();
} while(r > 0);
idle_count++;
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200));
#endif /* WITH_UIP */
leds_on(LEDS_GREEN);
ds2411_init();
/* XXX hack: Fix it so that the 802.15.4 MAC address is compatible
with an Ethernet MAC address - byte 0 (byte 2 in the DS ID)
cannot be odd. */
ds2411_id[2] &= 0xfe;
leds_on(LEDS_BLUE);
xmem_init();
leds_off(LEDS_RED);
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
node_id_restore();
random_init(ds2411_id[0] + node_id);
leds_off(LEDS_BLUE);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
process_start(&sensors_process, NULL);
/*
* Initialize light and humidity/temp sensors.
*/
sensors_light_init();
battery_sensor.activate();
sht11_init();
ctimer_init();
cc2420_init();
cc2420_set_pan_addr(IEEE802154_PANID, 0 /*XXX*/, ds2411_id);
cc2420_set_channel(RF_CHANNEL);
printf(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
printf("Node id is set to %u.\n", node_id);
} else {
printf("Node id is not set.\n");
}
set_rime_addr();
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7]);
#if WITH_UIP6
memcpy(&uip_lladdr.addr, ds2411_id, sizeof(uip_lladdr.addr));
sicslowpan_init(sicslowmac_init(&cc2420_driver));
process_start(&tcpip_process, NULL);
printf(" %s channel %u\n", sicslowmac_driver.name, RF_CHANNEL);
#if UIP_CONF_ROUTER
rime_init(rime_udp_init(NULL));
uip_router_register(&rimeroute);
#endif /* UIP_CONF_ROUTER */
#else /* WITH_UIP6 */
rime_init(MAC_DRIVER.init(&cc2420_driver));
printf(" %s channel %u\n", rime_mac->name, RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP && !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#if PROFILE_CONF_ON
profile_init();
#endif /* PROFILE_CONF_ON */
leds_off(LEDS_GREEN);
#if WITH_FTSP
ftsp_init();
#endif /* WITH_FTSP */
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(rimeaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172,16,
rimeaddr_node_addr.u8[0],rimeaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
printf("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* WITH_UIP */
button_sensor.activate();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
print_processes(autostart_processes);
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
#if DCOSYNCH_CONF_ENABLED
timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
watchdog_start();
/* watchdog_stop();*/
while(1) {
int r;
#if PROFILE_CONF_ON
profile_episode_start();
#endif /* PROFILE_CONF_ON */
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
#if PROFILE_CONF_ON
profile_episode_end();
#endif /* PROFILE_CONF_ON */
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
#if DCOSYNCH_CONF_ENABLED
/* before going down to sleep possibly do some management */
if (timer_expired(&mgt_timer)) {
timer_reset(&mgt_timer);
msp430_sync_dco();
}
#endif
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
#if WITH_TINYOS_AUTO_IDS
uint16_t TOS_NODE_ID = 0x1234; /* non-zero */
uint16_t TOS_LOCAL_ADDRESS = 0x1234; /* non-zero */
#endif /* WITH_TINYOS_AUTO_IDS */
int
main(void)
{
/* Set stack overflow address for detecting overflow in runtime */
vAHI_SetStackOverflow(TRUE, ((uint32_t *)&heap_location)[0]);
/* Initialize random with a seed from the SoC random generator.
* This must be done before selecting the high-precision external oscillator.
*/
vAHI_StartRandomNumberGenerator(E_AHI_RND_SINGLE_SHOT, E_AHI_INTS_DISABLED);
random_init(u16AHI_ReadRandomNumber());
clock_init();
rtimer_init();
#if JN516X_EXTERNAL_CRYSTAL_OSCILLATOR
/* initialize the 32kHz crystal and wait for ready */
xosc_init();
/* need to reinitialize because the wait-for-ready process uses system timers */
clock_init();
rtimer_init();
#endif
watchdog_init();
leds_init();
leds_on(LEDS_ALL);
init_node_mac();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
node_id_restore();
#if WITH_TINYOS_AUTO_IDS
node_id = TOS_NODE_ID;
#endif /* WITH_TINYOS_AUTO_IDS */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef IEEE_802154_MAC_ADDRESS
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
node_mac[7] = node_id & 0xff;
}
#endif
process_init();
ctimer_init();
uart0_init(UART_BAUD_RATE); /* Must come before first PRINTF */
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(UART_BAUD_RATE);
#endif /* NETSTACK_CONF_WITH_IPV4 */
/* check for reset source */
if(bAHI_WatchdogResetEvent()) {
PRINTF("Init: Watchdog timer has reset device!\r\n");
}
process_start(&etimer_process, NULL);
set_linkaddr();
netstack_init();
#if NETSTACK_CONF_WITH_IPV6
#if UIP_CONF_IPV6_RPL
PRINTF(CONTIKI_VERSION_STRING " started with IPV6, RPL\n");
#else
PRINTF(CONTIKI_VERSION_STRING " started with IPV6\n");
#endif
#elif NETSTACK_CONF_WITH_IPV4
PRINTF(CONTIKI_VERSION_STRING " started with IPV4\n");
#else
PRINTF(CONTIKI_VERSION_STRING " started\n");
#endif
if(node_id > 0) {
PRINTF("Node id is set to %u.\n", node_id);
} else {
PRINTF("Node id is not set.\n");
}
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
queuebuf_init();
#endif /* NETSTACK_CONF_WITH_IPV6 */
PRINTF("%s %s %s\n", NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name);
#if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level((linkaddr_node_addr.u8[0] << 4) + 16);
#endif /* TIMESYNCH_CONF_ENABLED */
#if NETSTACK_CONF_WITH_IPV4
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172, 16,
linkaddr_node_addr.u8[0], linkaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255, 255, 0, 0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
PRINTF("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* NETSTACK_CONF_WITH_IPV4 */
watchdog_start();
NETSTACK_LLSEC.init();
#if NETSTACK_CONF_WITH_IPV6
start_uip6();
#endif /* NETSTACK_CONF_WITH_IPV6 */
/* need this to reliably generate the first rtimer callback and callbacks in other
auto-start processes */
(void)u32AHI_Init();
start_autostart_processes();
leds_off(LEDS_ALL);
main_loop();
return -1;
}
/**
* \brief Main function for nRF52dk platform.
* \note This function doesn't return.
*/
int
main(void)
{
board_init();
leds_init();
clock_init();
rtimer_init();
watchdog_init();
process_init();
// Seed value is ignored since hardware RNG is used.
random_init(0);
#ifdef UART0_ENABLED
uart0_init();
#if SLIP_ARCH_CONF_ENABLE
slip_arch_init(0);
#else
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
#endif
PRINTF("Starting " CONTIKI_VERSION_STRING "\n");
process_start(&etimer_process, NULL);
ctimer_init();
#if ENERGEST_CONF_ON
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
#endif
#ifdef SOFTDEVICE_PRESENT
ble_stack_init();
ble_advertising_init(DEVICE_NAME);
#if NETSTACK_CONF_WITH_IPV6
netstack_init();
linkaddr_t linkaddr;
ble_get_mac(linkaddr.u8);
/* Set link layer address */
linkaddr_set_node_addr(&linkaddr);
/* Set device link layer address in uip stack */
memcpy(&uip_lladdr.addr, &linkaddr, sizeof(uip_lladdr.addr));
process_start(&ble_iface_observer, NULL);
process_start(&tcpip_process, NULL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#endif /* SOFTDEVICE_PRESENT */
process_start(&sensors_process, NULL);
autostart_start(autostart_processes);
watchdog_start();
#ifdef SOFTDEVICE_PRESENT
ble_advertising_start();
PRINTF("Advertising name [%s]\n", DEVICE_NAME);
#endif
while(1) {
uint8_t r;
do {
r = process_run();
watchdog_periodic();
} while(r > 0);
lpm_drop();
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/* Hardware initialization */
clock_init();
soc_init();
rtimer_init();
/* Init LEDs here */
leds_init();
leds_off(LEDS_ALL);
fade(LEDS_GREEN);
/* initialize process manager. */
process_init();
/* Init UART */
uart0_init();
#if DMA_ON
dma_init();
#endif
#if SLIP_ARCH_CONF_ENABLE
slip_arch_init(0);
#else
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
fade(LEDS_RED);
PUTSTRING("##########################################\n");
putstring(CONTIKI_VERSION_STRING "\n");
putstring("TI SmartRF05 EB\n");
switch(CHIPID) {
case 0xA5:
putstring("cc2530");
break;
case 0xB5:
putstring("cc2531");
break;
case 0x95:
putstring("cc2533");
break;
case 0x8D:
putstring("cc2540");
break;
}
putstring("-F");
switch(CHIPINFO0 & 0x70) {
case 0x40:
putstring("256, ");
break;
case 0x30:
putstring("128, ");
break;
case 0x20:
putstring("64, ");
break;
case 0x10:
putstring("32, ");
break;
}
puthex(CHIPINFO1 + 1);
putstring("KB SRAM\n");
PUTSTRING("\nSDCC Build:\n");
#if STARTUP_VERBOSE
#ifdef HAVE_SDCC_BANKING
PUTSTRING(" With Banking.\n");
#endif /* HAVE_SDCC_BANKING */
#ifdef SDCC_MODEL_LARGE
PUTSTRING(" --model-large\n");
#endif /* SDCC_MODEL_LARGE */
#ifdef SDCC_MODEL_HUGE
PUTSTRING(" --model-huge\n");
#endif /* SDCC_MODEL_HUGE */
#ifdef SDCC_STACK_AUTO
PUTSTRING(" --stack-auto\n");
#endif /* SDCC_STACK_AUTO */
PUTCHAR('\n');
PUTSTRING(" Net: ");
PUTSTRING(NETSTACK_NETWORK.name);
PUTCHAR('\n');
PUTSTRING(" MAC: ");
PUTSTRING(NETSTACK_MAC.name);
PUTCHAR('\n');
PUTSTRING(" RDC: ");
PUTSTRING(NETSTACK_RDC.name);
PUTCHAR('\n');
PUTSTRING("##########################################\n");
#endif
watchdog_init();
/* Initialise the H/W RNG engine. */
random_init(0);
/* start services */
process_start(&etimer_process, NULL);
ctimer_init();
/* initialize the netstack */
netstack_init();
set_rime_addr();
#if BUTTON_SENSOR_ON || ADC_SENSOR_ON
process_start(&sensors_process, NULL);
BUTTON_SENSOR_ACTIVATE();
ADC_SENSOR_ACTIVATE();
#endif
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* UIP_CONF_IPV6 */
#if VIZTOOL_CONF_ON
process_start(&viztool_process, NULL);
#endif
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
fade(LEDS_YELLOW);
while(1) {
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic();
#if CLOCK_CONF_STACK_FRIENDLY
if(sleep_flag) {
if(etimer_pending() &&
(etimer_next_expiration_time() - clock_time() - 1) > MAX_TICKS) {
etimer_request_poll();
}
sleep_flag = 0;
}
#endif
r = process_run();
} while(r > 0);
len = NETSTACK_RADIO.pending_packet();
if(len) {
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
}
#if LPM_MODE
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & HFRC_STB)); /* Wait for RCOSC to be stable */
CLKCON |= OSC; /* Switch to the RCOSC */
while(!(CLKCON & OSC)); /* Wait till it's happened */
SLEEP |= OSC_PD; /* Turn the other one off */
#endif /* LPM_MODE==LPM_MODE_PM2 */
/*
* Set MCU IDLE or Drop to PM1. Any interrupt will take us out of LPM
* Sleep Timer will wake us up in no more than 7.8ms (max idle interval)
*/
SLEEPCMD = (SLEEPCMD & 0xFC) | (LPM_MODE - 1);
#if (LPM_MODE==LPM_MODE_PM2)
/*
* Wait 3 NOPs. Either an interrupt occurred and SLEEP.MODE was cleared or
* no interrupt occurred and we can safely power down
*/
__asm
nop
nop
nop
__endasm;
if(SLEEPCMD & SLEEP_MODE0) {
#endif /* LPM_MODE==LPM_MODE_PM2 */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
/* Go IDLE or Enter PM1 */
PCON |= PCON_IDLE;
/* First instruction upon exiting PM1 must be a NOP */
__asm
nop
__endasm;
/* Remember energest IRQ for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_ON(ENERGEST_TYPE_CPU);
ENERGEST_OFF(ENERGEST_TYPE_LPM);
#if (LPM_MODE==LPM_MODE_PM2)
SLEEPCMD &= ~SLEEP_OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEPCMD & SLEEP_XOSC_STB)); /* Wait for XOSC to be stable */
CLKCONCMD &= ~CLKCONCMD_OSC; /* Switch to the XOSC */
/*
* On occasion the XOSC is reported stable when in reality it's not.
* We need to wait for a safeguard of 64us or more before selecting it
*/
clock_delay(10);
while(CLKCONCMD & CLKCONCMD_OSC); /* Wait till it's happened */
}
#endif /* LPM_MODE==LPM_MODE_PM2 */
#endif /* LPM_MODE */
}
}
/**
* \brief Main routine for the cc2538dk platform
*/
int
main(void)
{
nvic_init();
sys_ctrl_init();
clock_init();
dint();
/*Init Watchdog*/
watchdog_init();//Need to check the watchdog on 123gxl
rtimer_init();
lpm_init();
gpio_init();
ioc_init();
leds_init();
fade(LEDS_YELLOW);
button_sensor_init();
/*
* Character I/O Initialisation.
* When the UART receives a character it will call serial_line_input_byte to
* notify the core. The same applies for the USB driver.
*
* If slip-arch is also linked in afterwards (e.g. if we are a border router)
* it will overwrite one of the two peripheral input callbacks. Characters
* received over the relevant peripheral will be handled by
* slip_input_byte instead
*/
#if UART_CONF_ENABLE
uart_init(0);
uart_init(1);
uart_set_input(SERIAL_LINE_CONF_UART, serial_line_input_byte);
#endif
#if USB_SERIAL_CONF_ENABLE
usb_serial_init();
usb_serial_set_input(serial_line_input_byte);
#endif
serial_line_init();
/*Enable EA*/
eint();
INTERRUPTS_ENABLE();
fade(LEDS_GREEN);
PRINTF("=================================\r\n");
PUTS(CONTIKI_VERSION_STRING);
PRINTF("======================\r\n");
PRINTF("\r\n");
PUTS(BOARD_STRING);
PRINTF("\r\n");
#ifdef NODEID
node_id = NODEID;
#ifdef BURN_NODEID
node_id_burn(node_id);
node_id_restore(); /* also configures node_mac[] */
#endif /* BURN_NODEID */
#else
node_id_restore(); /* also configures node_mac[] */
#endif /* NODE_ID */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef MAC_1
{
uint8_t ieee[] = { MAC_1, MAC_2, MAC_3, MAC_4, MAC_5, MAC_6, MAC_7, MAC_8 };
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
}
#endif
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&sensors_process, NULL);
button_sensor_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
printf("finish addr seting\r\n");
/* Initialise the H/W RNG engine. */
random_init(0);
udma_init();
if(node_id > 0) {
printf("Node id %u.\r\n", node_id);
} else {
printf("Node id not set.\r\n");
}
#if WITH_UIP6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
queuebuf_init();
netstack_init();
PRINTF("CC2538 IEEE802154 PANID %d\r\n", IEEE802154_PANID);
cc2538_rf_set_addr(IEEE802154_PANID);
printf("%s/%s %lu %u\r\n",
NETSTACK_RDC.name,
NETSTACK_MAC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("IPv6 ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\r\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(1) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xfc00, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\r\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* WITH_UIP6 */
netstack_init();
PRINTF("CC2538 IEEE802154 PANID %d\r\n", IEEE802154_PANID);
cc2538_rf_set_addr(IEEE802154_PANID);
printf("%s %lu %u\r\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#ifdef NETSTACK_AES_H
#ifndef NETSTACK_AES_KEY
#error Please define NETSTACK_AES_KEY!
#endif /* NETSTACK_AES_KEY */
{
const uint8_t key[] = NETSTACK_AES_KEY;
netstack_aes_set_key(key);
}
/*printf("AES encryption is enabled: '%s'\n", NETSTACK_AES_KEY);*/
printf("AES encryption is enabled\r\n");
#else /* NETSTACK_AES_H */
printf("Warning: AES encryption is disabled\r\n");
#endif /* NETSTACK_AES_H */
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(rimeaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
simple_rpl_init();
/*Watch dog configuration*/
watchdog_periodic();
watchdog_start();
autostart_start(autostart_processes);
//duty_cycle_scroller_start(CLOCK_SECOND * 2);
#if IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP && WITH_SLIP
/* Start the SLIP */
printf("Initiating SLIP: my IP is 172.16.0.2...\r\n");
slip_arch_init(0);
{
uip_ip4addr_t ipv4addr, netmask;
uip_ipaddr(&ipv4addr, 172, 16, 0, 2);
uip_ipaddr(&netmask, 255, 255, 255, 0);
ip64_set_ipv4_address(&ipv4addr, &netmask);
}
uart1_set_input(slip_input_byte);
#endif /* IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP */
fade(LEDS_ORANGE);
/*
* This is the scheduler loop.
*/
while(1) {
uint8_t r;
do {
/* Reset watchdog and handle polls and events */
// printf("reset watchdog\r\n");
watchdog_periodic();
r = process_run();
} while(r > 0);
/* We have serviced all pending events. Enter a Low-Power mode. */
lpm_enter();
}
}
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_toggle(LEDS_ALL);
slip_arch_init(BAUD2UBR(115200)); /* Must come before first printf */
printf("Starting %s "
"($Id: client.c,v 1.1 2008/05/27 13:16:34 adamdunkels Exp $)\n", __FILE__);
ds2411_init();
sensors_light_init();
cc2420_init();
xmem_init();
button_init(&button_process);
leds_toggle(LEDS_ALL);
/*
* Hardware initialization done!
*/
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x CHANNEL %d\n",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7],
RF_CHANNEL);
uip_ipaddr_copy(&uip_hostaddr, &cc2420if.ipaddr);
uip_ipaddr_copy(&uip_netmask, &cc2420if.netmask);
uip_ipaddr(&uip_draddr, 172,16,0,1);
printf("IP %d.%d.%d.%d netmask %d.%d.%d.%d default router %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&uip_hostaddr),
uip_ipaddr_to_quad(&uip_netmask),
uip_ipaddr_to_quad(&uip_draddr));
cc2420_set_chan_pan_addr(RF_CHANNEL, panId, uip_hostaddr.u16[1], ds2411_id);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
/* Configure IP stack. */
uip_init();
uip_fw_default(&cc2420if);
tcpip_set_forwarding(1);
/* Start IP stack. */
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&cc2420_process, NULL);
cc2420_on();
process_start(&uaodv_process, NULL);
process_start(&button_process, NULL);
process_start(&tcp_loader_process, NULL);
/*
* This is the scheduler loop.
*/
printf("process_run()...\n");
while (1) {
do {
/* Reset watchdog. */
} while(process_run() > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
if(process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
/* Re-enable interrupts and go to sleep atomically. */
_BIS_SR(GIE | SCG0 | CPUOFF); /* LPM1 sleep. */
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/* Hardware initialization */
bus_init();//ʱÖÓ³õʼ»¯
rtimer_init();//¼ÆʱÆ÷³õʼ»¯
/* model-specific h/w init. */
io_port_init();
/* Init LEDs here */
leds_init();//LED³õʼ»¯
/*LEDS_GREEN indicate LEDs Init finished*/
fade(LEDS_GREEN);
/* initialize process manager. */
process_init();//½ø³Ì¹ÜÀí³õʼ»¯
/* Init UART0
* Based on the EJOY MCU CC2430 Circuit Design
* */
uart0_init();//UART0´®¿Ú³õʼ»¯
#if DMA_ON
dma_init();//DMA³õʼ»¯
#endif
#if SLIP_ARCH_CONF_ENABLE
/* On cc2430, the argument is not used */
slip_arch_init(0);//SLIP³õʼ»¯
#else
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
PUTSTRING("##########################################\n");
putstring(CONTIKI_VERSION_STRING "\n");
// putstring(SENSINODE_MODEL " (CC24");
puthex(((CHIPID >> 3) | 0x20));
putstring("-" FLASH_SIZE ")\n");
#if STARTUP_VERBOSE
#ifdef HAVE_SDCC_BANKING
PUTSTRING(" With Banking.\n");
#endif /* HAVE_SDCC_BANKING */
#ifdef SDCC_MODEL_LARGE
PUTSTRING(" --model-large\n");
#endif /* SDCC_MODEL_LARGE */
#ifdef SDCC_MODEL_HUGE
PUTSTRING(" --model-huge\n");
#endif /* SDCC_MODEL_HUGE */
#ifdef SDCC_STACK_AUTO
PUTSTRING(" --stack-auto\n");
#endif /* SDCC_STACK_AUTO */
PUTCHAR('\n');
PUTSTRING(" Net: ");
PUTSTRING(NETSTACK_NETWORK.name);
PUTCHAR('\n');
PUTSTRING(" MAC: ");
PUTSTRING(NETSTACK_MAC.name);
PUTCHAR('\n');
PUTSTRING(" RDC: ");
PUTSTRING(NETSTACK_RDC.name);
PUTCHAR('\n');
PUTSTRING("##########################################\n");
#endif
watchdog_init();//¿´ÃŹ·³õʼ»¯
/* Initialise the cc2430 RNG engine. */
random_init(0);//Ëæ»úÊýÉú³ÉÆ÷³õʼ»¯
/* start services */
process_start(&etimer_process, NULL);//
ctimer_init();//ctimer³õʼ»¯
/* initialize the netstack */
netstack_init();//ÍøÂçµ×²ãÕ»³õʼ»¯
set_rime_addr();//rimeµØÖ·ÉèÖÃ
//there is no sensor for us maintenance
#if BUTTON_SENSOR_ON || ADC_SENSOR_ON
process_start(&sensors_process, NULL);
sensinode_sensors_activate();
#endif
//IPV6,YES!
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
//DISCO
#if DISCO_ENABLED
process_start(&disco_process, NULL);
#endif /* DISCO_ENABLED */
//VIZTOOL
#if VIZTOOL_CONF_ON
process_start(&viztool_process, NULL);
#endif
#if (!UIP_CONF_IPV6_RPL)
{
uip_ipaddr_t ipaddr;
uip_ip6addr(&ipaddr, 0x2001, 0x630, 0x301, 0x6453, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
}
#endif /* UIP_CONF_IPV6_RPL */
#endif /* UIP_CONF_IPV6 */
/*
* Acknowledge the UART1 RX interrupt
* now that we're sure we are ready to process it
*
* We don't need it. by MW
*/
// model_uart_intr_en();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
fade(LEDS_RED);
#if BATMON_CONF_ON
process_start(&batmon_process, NULL);
#endif
autostart_start(autostart_processes);
watchdog_start();
while(1) {
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic();
/**/
#if !CLOCK_CONF_ACCURATE
if(sleep_flag) {
if(etimer_pending() &&
(etimer_next_expiration_time() - count - 1) > MAX_TICKS) { /*core/sys/etimer.c*/
etimer_request_poll();
}
sleep_flag = 0;
}
#endif
r = process_run();
} while(r > 0);
#if SHORTCUTS_CONF_NETSTACK
len = NETSTACK_RADIO.pending_packet();
if(len) {
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
}
#endif
#if LPM_MODE
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & HFRC_STB)); /* Wait for RCOSC to be stable */
CLKCON |= OSC; /* Switch to the RCOSC */
while(!(CLKCON & OSC)); /* Wait till it's happened */
SLEEP |= OSC_PD; /* Turn the other one off */
#endif /* LPM_MODE==LPM_MODE_PM2 */
/*
* Set MCU IDLE or Drop to PM1. Any interrupt will take us out of LPM
* Sleep Timer will wake us up in no more than 7.8ms (max idle interval)
*/
SLEEP = (SLEEP & 0xFC) | (LPM_MODE - 1);
#if (LPM_MODE==LPM_MODE_PM2)
/*
* Wait 3 NOPs. Either an interrupt occurred and SLEEP.MODE was cleared or
* no interrupt occurred and we can safely power down
*/
__asm
nop
nop
nop
__endasm;
if (SLEEP & SLEEP_MODE0) {
#endif /* LPM_MODE==LPM_MODE_PM2 */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
/* Go IDLE or Enter PM1 */
PCON |= IDLE;
/* First instruction upon exiting PM1 must be a NOP */
__asm
nop
__endasm;
/* Remember energest IRQ for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_ON(ENERGEST_TYPE_CPU);
ENERGEST_OFF(ENERGEST_TYPE_LPM);
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & XOSC_STB)); /* Wait for XOSC to be stable */
CLKCON &= ~OSC; /* Switch to the XOSC */
/*
* On occasion the XOSC is reported stable when in reality it's not.
* We need to wait for a safeguard of 64us or more before selecting it
*/
clock_delay(10);
while(CLKCON & OSC); /* Wait till it's happened */
}
#endif /* LPM_MODE==LPM_MODE_PM2 */
#endif /* LPM_MODE */
}
}
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_toggle(LEDS_ALL);
slip_arch_init(BAUD2UBR(115200)); /* Must come before first printf */
printf("Starting %s "
"($Id: gateway.c,v 1.2 2010/10/19 18:29:04 adamdunkels Exp $)\n", __FILE__);
ds2411_init();
sensors_light_init();
cc2420_init();
xmem_init();
leds_toggle(LEDS_ALL);
/*
* Hardware initialization done!
*/
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x CHANNEL %d\n",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7],
RF_CHANNEL);
uip_ipaddr_copy(&uip_hostaddr, &cc2420if.ipaddr);
uip_ipaddr_copy(&uip_netmask, &cc2420if.netmask);
printf("IP %d.%d.%d.%d netmask %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&uip_hostaddr), uip_ipaddr_to_quad(&uip_netmask));
cc2420_set_chan_pan_addr(RF_CHANNEL, panId, uip_hostaddr.u16[1], ds2411_id);
srand(rand() +
(ds2411_id[3]<<8) + (ds2411_id[4]<<6) + (ds2411_id[5]<<4) +
(ds2411_id[6]<<2) + ds2411_id[7]);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
/* Configure IP stack. */
uip_init();
uip_fw_default(&slipif); /* Point2point, no default router. */
uip_fw_register(&cc2420if);
tcpip_set_forwarding(1);
/* Start IP stack. */
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
process_start(&cc2420_process, NULL);
cc2420_on();
process_start(&uaodv_process, NULL);
process_start(&tcp_loader_process, NULL);
/*
* This is the scheduler loop.
*/
printf("process_run()...\n");
while (1) {
do {
/* Reset watchdog. */
} while(process_run() > 0);
/* Idle! */
}
return 0;
}
/*---------------------------------------------------------------------------*/
#if WITH_TINYOS_AUTO_IDS
uint16_t TOS_NODE_ID = 0x1234; /* non-zero */
uint16_t TOS_LOCAL_ADDRESS = 0x1234; /* non-zero */
#endif /* WITH_TINYOS_AUTO_IDS */
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
leds_on(LEDS_GREEN);
ds2411_init();
/* XXX hack: Fix it so that the 802.15.4 MAC address is compatible
with an Ethernet MAC address - byte 0 (byte 2 in the DS ID)
cannot be odd. */
ds2411_id[2] &= 0xfe;
leds_on(LEDS_BLUE);
xmem_init();
leds_off(LEDS_RED);
rtimer_init();
/*
* Hardware initialization done!
*/
/* Initialize energest first (but after rtimer)
*/
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
#if WITH_TINYOS_AUTO_IDS
node_id = TOS_NODE_ID;
#else /* WITH_TINYOS_AUTO_IDS */
/* Restore node id if such has been stored in external mem */
node_id_restore();
#endif /* WITH_TINYOS_AUTO_IDS */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef IEEE_802154_MAC_ADDRESS
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
memcpy(ds2411_id, ieee, sizeof(uip_lladdr.addr));
ds2411_id[7] = node_id & 0xff;
}
#endif
random_init(ds2411_id[0] + node_id);
leds_off(LEDS_BLUE);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(BAUD2UBR(115200));
#endif /* NETSTACK_CONF_WITH_IPV4 */
init_platform();
set_rime_addr();
cc2420_init();
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (linkaddr_node_addr.u8[0] << 8) +
linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
PRINTF("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
PRINTF(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
PRINTF("Node id is set to %u.\n", node_id);
} else {
PRINTF("Node id is not set.\n");
}
/* PRINTF("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7]);*/
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, ds2411_id, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
/* sicslowpan_init(sicslowmac_init(&cc2420_driver)); */
/* PRINTF(" %s channel %u\n", sicslowmac_driver.name, CC2420_CONF_CCA_THRESH); */
/* Setup X-MAC for 802.15.4 */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_LLSEC.init();
NETSTACK_NETWORK.init();
PRINTF("%s %s %s, channel check rate %lu Hz, radio channel %u, CCA threshold %i\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL,
CC2420_CONF_CCA_THRESH);
process_start(&tcpip_process, NULL);
#if DEBUG
PRINTF("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
PRINTF("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
PRINTF("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
#endif /* DEBUG */
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
PRINTF("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
PRINTF("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
PRINTF("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* NETSTACK_CONF_WITH_IPV6 */
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_LLSEC.init();
NETSTACK_NETWORK.init();
PRINTF("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
leds_off(LEDS_GREEN);
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level((linkaddr_node_addr.u8[0] << 4) + 16);
#endif /* TIMESYNCH_CONF_ENABLED */
#if NETSTACK_CONF_WITH_IPV4
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172,16,
linkaddr_node_addr.u8[0],linkaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
PRINTF("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* NETSTACK_CONF_WITH_IPV4 */
watchdog_start();
#if !PROCESS_CONF_NO_PROCESS_NAMES
print_processes(autostart_processes);
#endif /* !PROCESS_CONF_NO_PROCESS_NAMES */
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
#if DCOSYNCH_CONF_ENABLED
timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
/* watchdog_stop();*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
#if DCOSYNCH_CONF_ENABLED
/* before going down to sleep possibly do some management */
if(timer_expired(&mgt_timer)) {
watchdog_periodic();
timer_reset(&mgt_timer);
msp430_sync_dco();
#if CC2420_CONF_SFD_TIMESTAMPS
cc2420_arch_sfd_init();
#endif /* CC2420_CONF_SFD_TIMESTAMPS */
}
#endif
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
/* check if the DCO needs to be on - if so - only LPM 1 */
if (msp430_dco_required) {
_BIS_SR(GIE | CPUOFF); /* LPM1 sleep for DMA to work!. */
} else {
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
}
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
clock_init(); // 初始化 睡眠定时器 必要
soc_init(); // 还函数中启动了全局中断 可修改
rtimer_init(); // rtimer为定时器1 必要
/* Init LEDs here */
leds_init(); // 初始化LED 可修改
leds_off(LEDS_ALL); // 关闭所有LED 非必要
fade(LEDS_GREEN); // 绿色闪烁一下 非必要
/* initialize process manager. */
process_init(); // 任务初始化 必要
/* Init UART */
uart0_init(); // 初始化串口0，先用于调试，可修改
#if DMA_ON
dma_init(); // 非必要
#endif
#if SLIP_ARCH_CONF_ENABLE
slip_arch_init(0);
#else
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
fade(LEDS_RED); // 红色LED闪烁一下 非必要
// 打印若干提示信息 非必要 可修改
putstring("**************************************\r\n");
putstring(CONTIKI_VERSION_STRING "\r\n"); // 打印若干信息
putstring("Platform CC2530 NB\r\n");
switch(CHIPID) {
case 0xA5:
putstring("CC2530");
break;
case 0xB5:
putstring("CC2531");
break;
case 0x95:
putstring("CC2533");
break;
case 0x8D:
putstring("CC2540");
break;
}
putstring("-F");
switch(CHIPINFO0 & 0x70) {
case 0x40:
putstring("256,");
break;
case 0x30:
putstring("128,");
break;
case 0x20:
putstring("64,");
break;
case 0x10:
putstring("32,");
break;
}
puthex(CHIPINFO1 + 1);
putstring("KB SRAM\r\n");
#if STARTUP_VERBOSE
PUTSTRING("Net: "); // NETWORK名称
PUTSTRING(NETSTACK_NETWORK.name);
PUTCHAR('\r');PUTCHAR('\n');
PUTSTRING("MAC: "); // MAC名称
PUTSTRING(NETSTACK_MAC.name);
PUTCHAR('\r');PUTCHAR('\n');
PUTSTRING("RDC: "); // RDC名称
PUTSTRING(NETSTACK_RDC.name);
PUTCHAR('\r');PUTCHAR('\n');
PUTSTRING("**************************************\r\n");
#endif
watchdog_init(); // 初始化看门狗
/* Initialise the H/W RNG engine. */
random_init(0); //
/* start services */
process_start(&etimer_process, NULL); // 启动etimer任务
ctimer_init(); // ctimer初始化
/* initialize the netstack */
netstack_init(); // NET协议栈初始化
set_rime_addr(); // 设置RIME地址，相当于设置IP地址
#if BUTTON_SENSOR_ON || ADC_SENSOR_ON
process_start(&sensors_process, NULL);
BUTTON_SENSOR_ACTIVATE();
ADC_SENSOR_ACTIVATE();
#endif
#if UIP_CONF_IPV6 // 非常重要，启动TCPIP查询任务
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* UIP_CONF_IPV6 */
#if VIZTOOL_CONF_ON
process_start(&viztool_process, NULL);
#endif
energest_init(); // 能量估计初始化，但是该功能未被打开
ENERGEST_ON(ENERGEST_TYPE_CPU); // 该功能未被打开
autostart_start(autostart_processes); // 启动被定义为自动启动的任务
watchdog_start(); // 看门狗初始化
fade(LEDS_YELLOW); // 黄色LED闪烁，完成所有初始化工作
while(1) {
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic(); // 喂狗操作
r = process_run();
} while(r > 0);
#if SHORTCUTS_CONF_NETSTACK // 循环查询无线输入数据包长度 tcpip_process
len = NETSTACK_RADIO.pending_packet();
if(len) {
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
}
#endif
#if LPM_MODE // 该宏被定义为0，没有休眠功能，以下代码均无效
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & HFRC_STB)); /* Wait for RCOSC to be stable */
CLKCON |= OSC; /* Switch to the RCOSC */
while(!(CLKCON & OSC)); /* Wait till it's happened */
SLEEP |= OSC_PD; /* Turn the other one off */
#endif /* LPM_MODE==LPM_MODE_PM2 */
/*
* Set MCU IDLE or Drop to PM1. Any interrupt will take us out of LPM
* Sleep Timer will wake us up in no more than 7.8ms (max idle interval)
*/
SLEEPCMD = (SLEEPCMD & 0xFC) | (LPM_MODE - 1);
#if (LPM_MODE==LPM_MODE_PM2)
/*
* Wait 3 NOPs. Either an interrupt occurred and SLEEP.MODE was cleared or
* no interrupt occurred and we can safely power down
*/
__asm
nop
nop
nop
__endasm;
if(SLEEPCMD & SLEEP_MODE0) {
#endif /* LPM_MODE==LPM_MODE_PM2 */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
/* Go IDLE or Enter PM1 */
PCON |= PCON_IDLE;
/* First instruction upon exiting PM1 must be a NOP */
__asm
nop
__endasm;
/* Remember energest IRQ for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_ON(ENERGEST_TYPE_CPU);
ENERGEST_OFF(ENERGEST_TYPE_LPM);
#if (LPM_MODE==LPM_MODE_PM2)
SLEEPCMD &= ~SLEEP_OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEPCMD & SLEEP_XOSC_STB)); /* Wait for XOSC to be stable */
CLKCONCMD &= ~CLKCONCMD_OSC; /* Switch to the XOSC */
/*
* On occasion the XOSC is reported stable when in reality it's not.
* We need to wait for a safeguard of 64us or more before selecting it
*/
clock_delay(10);
while(CLKCONCMD & CLKCONCMD_OSC); /* Wait till it's happened */
}
#endif /* LPM_MODE==LPM_MODE_PM2 */
#endif /* LPM_MODE */
}
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_toggle(LEDS_RED | LEDS_GREEN | LEDS_BLUE);
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200)); /* Must come before first printf */
#else /* WITH_UIP */
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
#endif /* WITH_UIP */
printf("Starting %s "
"($Id: contiki-sky-main.c,v 1.9 2009/11/20 10:45:07 nifi Exp $)\n", __FILE__);
ds2411_init();
xmem_init();
leds_toggle(LEDS_RED | LEDS_GREEN | LEDS_BLUE);
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
// node_id_burn(3);
node_id_restore();
printf("node_id : %hu\n", node_id);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7]);
#if WITH_UIP
uip_init();
uip_sethostaddr(&slipif.ipaddr);
uip_setnetmask(&slipif.netmask);
uip_fw_default(&slipif); /* Point2point, no default router. */
#endif /* WITH_UIP */
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
process_start(&sensors_process, NULL);
/*
* Initialize light and humidity/temp sensors.
*/
SENSORS_ACTIVATE(light_sensor);
SENSORS_ACTIVATE(sht11_sensor);
ctimer_init();
set_rime_addr();
cc2420_init();
cc2420_set_pan_addr(panId, 0 /*XXX*/, ds2411_id);
cc2420_set_channel(RF_CHANNEL);
cc2420_set_txpower(31);
nullmac_init(&cc2420_driver);
rime_init(&nullmac_driver);
// xmac_init(&cc2420_driver);
// rime_init(&xmac_driver);
/* rimeaddr_set_node_addr*/
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
#endif /* WITH_UIP */
SENSORS_ACTIVATE(button_sensor);
print_processes(autostart_processes);
autostart_start(autostart_processes);
energest_init();
/*
* This is the scheduler loop.
*/
printf("process_run()...\n");
ENERGEST_ON(ENERGEST_TYPE_CPU);
while (1) {
do {
/* Reset watchdog. */
} while(process_run() > 0);
/*
* Idle processing.
*/
if(lpm_en) {
int s = splhigh(); /* Disable interrupts. */
if(process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
_BIS_SR(GIE | SCG0 | /*SCG1 |*/ CPUOFF); /* LPM3 sleep. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
clock_wait(2);
uart1_init(115200); /* Must come before first printf */
#if WITH_UIP
slip_arch_init(115200);
#endif /* WITH_UIP */
clock_wait(1);
leds_on(LEDS_GREEN);
//ds2411_init();
/* XXX hack: Fix it so that the 802.15.4 MAC address is compatible
with an Ethernet MAC address - byte 0 (byte 2 in the DS ID)
cannot be odd. */
//ds2411_id[2] &= 0xfe;
leds_on(LEDS_BLUE);
//xmem_init();
leds_off(LEDS_RED);
rtimer_init();
/*
* Hardware initialization done!
*/
node_id = NODE_ID;
/* Restore node id if such has been stored in external mem */
//node_id_restore();
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef IEEE_802154_MAC_ADDRESS
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
//memcpy(ds2411_id, ieee, sizeof(uip_lladdr.addr));
//ds2411_id[7] = node_id & 0xff;
}
#endif
//random_init(ds2411_id[0] + node_id);
leds_off(LEDS_BLUE);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
init_platform();
set_rime_addr();
cc2520_init();
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (rimeaddr_node_addr.u8[0] << 8) +
rimeaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
rimeaddr_copy((rimeaddr_t *)&longaddr, &rimeaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2520_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
cc2520_set_channel(RF_CHANNEL);
printf(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
printf("Node id is set to %u.\n", node_id);
} else {
printf("Node id is not set.\n");
}
#if WITH_UIP6
/* memcpy(&uip_lladdr.addr, ds2411_id, sizeof(uip_lladdr.addr)); */
memcpy(&uip_lladdr.addr, rimeaddr_node_addr.u8,
UIP_LLADDR_LEN > RIMEADDR_SIZE ? RIMEADDR_SIZE : UIP_LLADDR_LEN);
/* Setup nullmac-like MAC for 802.15.4 */
/* sicslowpan_init(sicslowmac_init(&cc2520_driver)); */
/* printf(" %s channel %u\n", sicslowmac_driver.name, RF_CHANNEL); */
/* Setup X-MAC for 802.15.4 */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* WITH_UIP6 */
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP && !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
leds_off(LEDS_GREEN);
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level((rimeaddr_node_addr.u8[0] << 4) + 16);
#endif /* TIMESYNCH_CONF_ENABLED */
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172,16,
rimeaddr_node_addr.u8[0],rimeaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
printf("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* WITH_UIP */
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
watchdog_start();
/* Stop the watchdog */
watchdog_stop();
#if !PROCESS_CONF_NO_PROCESS_NAMES
print_processes(autostart_processes);
#else /* !PROCESS_CONF_NO_PROCESS_NAMES */
putchar('\n'); /* include putchar() */
#endif /* !PROCESS_CONF_NO_PROCESS_NAMES */
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(demo_source, ev, data) {
static struct etimer et;
rimeaddr_t addr;
//PROCESS_EXITHANDLER(unicast_close(&unicast);)
PROCESS_BEGIN();
// unicast init //
unicast_open(&unicast, 146, &unicast_callbacks);
// UART init //
slip_arch_init(115200);
// DATA Storing //
data_sensing=(uint8_t *) malloc(UART_Full+1 * sizeof(uint8_t)); //size+1 은 첫번째에 indicator 넣기 위함!
data_sensing[0]='B'; //sensor 식별자 sensor A or sensor B
//data_sensing[UART_Full]=90;
while (1) {
etimer_set(&et, CLOCK_SECOND/10);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&et));
//printf("%d\t%c\n",data_sensing[0],data_sensing[0]);
/* RAIDO_LISTEN :
* Wait start signal from Sink Node */
if(CURRENT_STATE==RAIDO_LISTEN){
PRINTF("CURRENT_STATE: %d. RAIDO_LISTEN \n",CURRENT_STATE);
leds_on(RAIDO_LISTEN);
if (RADIO_Input=='S'){
UART_out('S');
CURRENT_STATE=UART_START;
RADIO_Input=NULL;
}
}
/* UART_SEND :
* 1. Sensor Interface로 부터 Sensing Complete(C) 신호를 받은 경우
* 2. Sensor Interface로 부터 1회 UART 전송을 완료하고 SUCCESS신호를 받은경우
* -> NEXT(N) 신호를 전달하여 다음 데이터 요구
* 1. Sensor Interface로 부터 (!SUCCESS)를 받은 경우
* ->Retransmission(R) 신호 전달 */
else if(CURRENT_STATE==UART_SEND){
PRINTF("CURRENT_STATE: %d. UART_SEND \n",CURRENT_STATE);
leds_on(UART_SEND);
if(UART_Success==1)
UART_out('N');
else if (UART_Success==0)
UART_out('R');
CURRENT_STATE=UART_LISTEN;
}
/* UART_READY :
* 1회 전송 가능 data 량을 Sensor interface 로 부터 받은 경우
* data를 packet화 하여 unicast 전송 */
else if(CURRENT_STATE==UART_READY){
PRINTF("CURRENT_STATE: %d. UART_READY \n",CURRENT_STATE);
leds_on(UART_READY);
//헤더 붙이고, 데이터 패킷화 하여 전송하기
packetbuf_copyfrom(data_sensing, UART_Full+1);
addr.u8[0] = 4; addr.u8[1] = 0; //send to F2
unicast_send(&unicast, &addr);
CURRENT_STATE=RADIO_SENT;
}
else if(CURRENT_STATE==RADIO_SENT){
RADIO_NumSend++;
PRINTF("CURRENT_STATE: %d. RADIO_SNET \t RADIO_NumSend : %d\n",CURRENT_STATE,RADIO_NumSend);
leds_on(RADIO_SENT);
if(RADIO_NumSend>=END_SENSING)//End 인 경우
{
UART_End=1; //이건 아마 필요없는 기능이 될듯
CURRENT_STATE=RAIDO_LISTEN;
RADIO_NumSend=0;
}
else{
CURRENT_STATE=UART_SEND;
}
}
else if(CURRENT_STATE==UART_START){
PRINTF("CURRENT_STATE: %d. UART_START \n",UART_START);
leds_on(UART_START);
}
else if(CURRENT_STATE==UART_LISTEN){
PRINTF("CURRENT_STATE: %d. UART_LISTEN \n",UART_LISTEN);
leds_on(UART_LISTEN);
}
else {
PRINTF("NONE STATE \t%d\n",CURRENT_STATE);
leds_on(0);
}
}
PROCESS_END();
}
