Esempio n. 1
0
u32 de_pll_enable(__disp_clk_id_t clk_id, s32 bOnOff)
{
	u32 i;
	u32 count;
	u32 reg_val;

	count = sizeof(disp_clk_pll_tbl) / sizeof(clk_pll_para);

	for(i = 0; i < count; i++)
	{
		if(disp_clk_pll_tbl[i].clk_id == clk_id)
		{
			reg_val = smc_readl(disp_clk_pll_tbl[i].pll_adr);
			if(bOnOff)
			{
				pll_enable_count[i]++;
				if(pll_enable_count[i] == 1)
				{
					reg_val = SET_BITS(disp_clk_pll_tbl[i].enable_shift, 1, reg_val, 1);
					modify_cpu_source_ctrl();
					smc_writel(reg_val, disp_clk_pll_tbl[i].pll_adr);
					restore_cpu_source_ctrl();
					if(disp_clk_pll_tbl[i].src_id)
					{
						de_pll_enable(disp_clk_pll_tbl[i].src_id, bOnOff);
					}
				}

				__inf("enable pll %d\n", clk_id);
				return 1;
			}
			else
			{
				if(pll_enable_count[i] == 0)
				{
					__wrn("pll %d is already disable\n", clk_id);
				}

				pll_enable_count[i]--;
				if(pll_enable_count[i] == 0)
				{
					reg_val = SET_BITS(disp_clk_pll_tbl[i].enable_shift, 1, reg_val, 0);
					modify_cpu_source_ctrl();
					smc_writel(reg_val, disp_clk_pll_tbl[i].pll_adr);
					restore_cpu_source_ctrl();
					if(disp_clk_pll_tbl[i].src_id)
					{
						de_pll_enable(disp_clk_pll_tbl[i].src_id, bOnOff);
					}
				}
				__inf("disable pll %d\n", clk_id);
				return 1;
			}
		}
	}

	return 0;
}
Esempio n. 2
0
void de_clk_init_pll(void)
{
	u32 i;
	u32 count;

	count = sizeof(disp_clk_pll_tbl) / sizeof(clk_pll_para);
	for(i = 0; i < count; i++)
	{
		if(disp_clk_pll_tbl[i].freq)
			de_set_pll_rate(disp_clk_pll_tbl[i].clk_id, disp_clk_pll_tbl[i].freq);
	}
	/* PLL BIAS default config */
	smc_writel(0x00040000, PLL7_BIAS);
	smc_writel(0x00040000, PLL8_BIAS);
}
Esempio n. 3
0
/*
************************************************************************************************************
*
*                                             function
*
*    name          :
*
*    parmeters     :
*
*    return        :
*
*    note          :
*
*
************************************************************************************************************
*/
void sunxi_clear_fel_flag(void)
{
	volatile uint reg_val;

    do
    {
	    smc_writel((1<<16),            SUNXI_RPRCM_BASE + 0x1f0);
	    smc_writel((1<<16) | (1U<<31), SUNXI_RPRCM_BASE + 0x1f0);
	    __usdelay(10);
	    CP15ISB;
	    CP15DMB;
	    smc_writel((1<<16), SUNXI_RPRCM_BASE + 0x1f0);
	    reg_val = smc_readl(SUNXI_RPRCM_BASE + 0x1f0);
    }
    while((reg_val & 0xff) != 0);
}
Esempio n. 4
0
u32 de_set_pll_rate(__disp_clk_id_t clk_id, u32 freq)
{
	u32 fac_N, fac_M, ext_fac;
	u32 reg_val;
	if(clk_id == SYS_CLK_PLL7)
	{
		reg_val = smc_readl(disp_clk_pll_tbl[0].pll_adr);
		calc_src_coef2(&fac_M, &fac_N, freq);
		reg_val = SET_BITS(disp_clk_pll_tbl[0].fac_shift, disp_clk_pll_tbl[0].fac_bit_num, reg_val, fac_N);
		reg_val = SET_BITS(disp_clk_pll_tbl[0].div_shift, disp_clk_pll_tbl[0].div_bit_num, reg_val, fac_M);
		smc_writel(reg_val, disp_clk_pll_tbl[0].pll_adr);
		return 1;
	}
	else if(clk_id == SYS_CLK_PLL8)
	{
		reg_val = smc_readl(disp_clk_pll_tbl[1].pll_adr);
		calc_pll8_coef(&fac_M, &ext_fac, &fac_N, freq);
		if(freq == 297000000) {
			fac_N = 0xc6;
			fac_M = 0x1;
			ext_fac = 0x3;
		}
		reg_val = SET_BITS(disp_clk_pll_tbl[1].fac_shift, disp_clk_pll_tbl[1].fac_bit_num, reg_val, fac_N);
		reg_val = SET_BITS(disp_clk_pll_tbl[1].div_shift, disp_clk_pll_tbl[1].div_bit_num, reg_val, fac_M);
		reg_val = SET_BITS(disp_clk_pll_tbl[1].ext_div_shift, disp_clk_pll_tbl[1].ext_div_bit_num, reg_val, ext_fac);
		smc_writel(reg_val, disp_clk_pll_tbl[1].pll_adr);
		return 1;
	}
	else if(clk_id == SYS_CLK_PLL10)
	{
		reg_val = smc_readl(disp_clk_pll_tbl[2].pll_adr);
		calc_src_coef3(&fac_M, &ext_fac, &fac_N, freq);
		reg_val = SET_BITS(disp_clk_pll_tbl[2].fac_shift, disp_clk_pll_tbl[2].fac_bit_num, reg_val, fac_N);
		reg_val = SET_BITS(disp_clk_pll_tbl[2].div_shift, disp_clk_pll_tbl[2].div_bit_num, reg_val, fac_M);
		reg_val = SET_BITS(disp_clk_pll_tbl[2].ext_div_shift, disp_clk_pll_tbl[2].ext_div_bit_num, reg_val, ext_fac);
		smc_writel(reg_val, disp_clk_pll_tbl[2].pll_adr);
		return 1;
	}
	else
	{
	}
	__wrn("set pll freq fail!\n");
	return 0;
}
Esempio n. 5
0
void restore_cpu_source_ctrl(void)
{
	u32 reg_val;
	reg_val = smc_readl(CCM_CPU_SOURCECTRL);
	reg_val |= 1;
	smc_writel(reg_val, CCM_CPU_SOURCECTRL);

	__usdelay(1000);
	dmb();
	isb();
}
Esempio n. 6
0
void modify_cpu_source_ctrl(void)
{
	u32 reg_val;
	reg_val = smc_readl(CCM_CPU_SOURCECTRL);
	reg_val &= ~1;

	smc_writel(reg_val, CCM_CPU_SOURCECTRL);
	__usdelay(10);
	dmb();
	isb();
}
Esempio n. 7
0
u32 de_set_mclk_src(__hdle clk_hdl)
{
	u32 i;
	u32 count;
	u32 reg_val;

	clk_mod_para *hdl = (clk_mod_para*)clk_hdl;

	count = sizeof(disp_clk_mod_tbl) / sizeof(clk_mod_para);
	for(i = 0; i < count; i++)
	{
		if(disp_clk_mod_tbl[i].clk_id == hdl->clk_id)
		{
			reg_val = smc_readl(disp_clk_mod_tbl[i].mod_adr);
			if(disp_clk_mod_tbl[i].src_id == SYS_CLK_PLL7)
			{
				reg_val = SET_BITS(disp_clk_mod_tbl[i].mod_src_shift, disp_clk_mod_tbl[i].mod_src_bit_num, reg_val, 8);
				smc_writel(reg_val, disp_clk_mod_tbl[i].mod_adr);
				return 1;
			}
			else if(disp_clk_mod_tbl[i].src_id == SYS_CLK_PLL8)
			{
				reg_val = SET_BITS(disp_clk_mod_tbl[i].mod_src_shift, disp_clk_mod_tbl[i].mod_src_bit_num, reg_val, 9);
				smc_writel(reg_val, disp_clk_mod_tbl[i].mod_adr);
				return 1;
			}
			else if(disp_clk_mod_tbl[i].src_id == SYS_CLK_PLL10)
			{
				reg_val = SET_BITS(disp_clk_mod_tbl[i].mod_src_shift, disp_clk_mod_tbl[i].mod_src_bit_num, reg_val, 11);
				smc_writel(reg_val, disp_clk_mod_tbl[i].mod_adr);
				return 1;
			}
			else
			{
				break;
			}
		}
	}
	__wrn("set mod clock %d src fail!\n", hdl->clk_id);
	return 0;
}
Esempio n. 8
0
u32 de_set_mclk_freq(__hdle clk_hdl, u32 nFreq)
{
	u32 i;
	u32 count;
	u32 src_freq;
	u32 div;
	__disp_clk_id_t src_id;
	u32 reg_val;

	src_id = de_get_mclk_src(clk_hdl);
	if(!src_id) {
		__wrn("get mode clk src fail!\n");
		return 0;
	}

	src_freq = de_get_pll_rate(src_id);
	if(!src_freq) {
		__wrn("get src freq fail!\n");
		return 0;
	}

	clk_mod_para *hdl = (clk_mod_para*)clk_hdl;
	count = sizeof(disp_clk_mod_tbl) / sizeof(clk_mod_para);
	for(i = 0; i < count; i++)
	{
		if(disp_clk_mod_tbl[i].clk_id == hdl->clk_id)
		{
			if(nFreq == 0) {
				nFreq = disp_clk_mod_tbl[i].freq;
			}

			if(nFreq == 0) {
				__wrn("get mode clk %d freq from table fail\n", hdl->clk_id);
				return 0;
			}

			div = (src_freq + nFreq / 2 - 1) / nFreq;
			if((div > 16) || (div < 1)) {
				__wrn("div is overflow\n");
				return 0;
			}

			reg_val = smc_readl(disp_clk_mod_tbl[i].mod_adr);
			reg_val = SET_BITS(disp_clk_mod_tbl[i].mod_div_shift, disp_clk_mod_tbl[i].mod_div_bit_num, reg_val, (div - 1));
			smc_writel(reg_val, disp_clk_mod_tbl[i].mod_adr);
			return 1;
		}
	}

	__wrn("get clk %d hdl fail\n", hdl->clk_id);
	return 0;
}
Esempio n. 9
0
s32 bsp_disp_init(__disp_bsp_init_para * para)
{
	u32 num_screens, screen_id;

#if defined(CONFIG_ARCH_SUN9IW1P1)
	u32 temp;
#endif

	memset(&gdisp,0x00,sizeof(__disp_dev_t));
	memcpy(&gdisp.init_para,para,sizeof(__disp_bsp_init_para));
	para->shadow_protect = bsp_disp_shadow_protect;
	disp_init_feat();

	num_screens = bsp_disp_feat_get_num_screens();
	for(screen_id = 0; screen_id < num_screens; screen_id++) {
#if defined(__LINUX_PLAT__)
		spin_lock_init(&gdisp.screen[screen_id].flag_lock);
#endif
	}

#if defined(CONFIG_ARCH_SUN9IW1P1)
	//for_test
//	temp = *((volatile u32*)(0x060005a8));
//	temp = temp | 0x4;
//	*((volatile u32*)(0x060005a8)) = temp;
	temp = smc_readl(0x060005a8);
	temp |= 4;
	smc_writel(temp, 0x060005a8);
#endif

	//bsp_disp_set_print_level(DEFAULT_PRINT_LEVLE);
	disp_notifier_init();
	disp_init_al(para);
	disp_init_lcd(para);
#if defined(CONFIG_ARCH_SUN9IW1P1)
	disp_init_hdmi(para);
	disp_init_cursor(para);
#endif
	disp_init_mgr(para);
	disp_init_lyr(para);
	disp_init_smcl(para);
	disp_init_smbl(para);

	disp_init_connections();

	return DIS_SUCCESS;
}
Esempio n. 10
0
int power_config_gpio_bias(void)
{
	char gpio_bias[32], gpio_name[32];
	char *gpio_name_const="pa_bias";
	char port_index;
	char *axp=NULL, *supply=NULL, *vol=NULL;
	uint main_hd;
	uint bias_vol_set;
	int  index, ret, i;
	uint port_bias_addr;
	uint vol_index, config_type;
	int  pmu_vol;
	struct bias_set bias_vol_config[8] =
		{ {1800, 0}, {2500, 6}, {2800, 9}, {3000, 0xa}, {3300, 0xd}, {0, 0} };

	main_hd = script_parser_fetch_subkey_start("gpio_bias");
	if(main_hd == 0)
	{
		printf("gpio_bias not exist\n");
		return 0;
	}

	index = 0;
	while(1)
	{
		memset(gpio_bias, 0, 32);
		memset(gpio_name, 0, 32);
		ret = script_parser_fetch_subkey_next(main_hd, gpio_name, (int *)gpio_bias, &index);
		if(!ret)
		{
			lower(gpio_name);
			lower(gpio_bias);

			port_index = gpio_name[1];
			gpio_name[1] = 'a';
			if(strcmp(gpio_name_const, gpio_name))
			{
				printf("invalid gpio bias name %s\n", gpio_name);

				continue;
			}
			gpio_name[1] = port_index;
			i=0;
			axp = gpio_bias;
			while( (gpio_bias[i]!=':') && (gpio_bias[i]!='\0') )
			{
				i++;
			}
			gpio_bias[i++]='\0';

			if(!strcmp(axp, "constant"))
			{
				config_type = 1;
			}
			else if(!strcmp(axp, "floating"))
			{
				printf("ignore %s bias config\n", gpio_name);

				continue;
			}
			else
			{
				config_type = 0;
			}

			if(config_type == 0)
			{
				supply = gpio_bias + i;
				while( (gpio_bias[i]!=':') && (gpio_bias[i]!='\0') )
				{
					i++;
				}
				gpio_bias[i++]='\0';
			}

			printf("supply=%s\n", supply);
			vol = gpio_bias + i;
			while( (gpio_bias[i]!=':') && (gpio_bias[i]!='\0') )
			{
				i++;
			}

			bias_vol_set = simple_strtoul(vol, NULL, 10);
			for(i=0;i<5;i++)
			{
				if(bias_vol_config[i].vol == bias_vol_set)
				{
					break;
				}
			}
			if(i==5)
			{
				printf("invalid gpio bias set vol %d, at name %s\n", bias_vol_set, gpio_name);

				break;
			}
			vol_index = bias_vol_config[i].index;

			if((port_index >= 'a') && (port_index <= 'h'))
			{
				//获取寄存器地址
				port_bias_addr = SUNXI_PIO_BASE + 0x300 + 0x4 * (port_index - 'a');
			}
			else if(port_index == 'j')
			{
				//获取寄存器地址
				port_bias_addr = SUNXI_PIO_BASE + 0x300 + 0x4 * (port_index - 'a');
			}
			else if((port_index == 'l') || (port_index == 'm'))
			{
				//获取寄存器地址
				port_bias_addr = SUNXI_RPIO_BASE + 0x300 + 0x4 * (port_index - 'l');
			}
			else
			{
				printf("invalid gpio port at name %s\n", gpio_name);

				continue;
			}
			printf("axp=%s, supply=%s, vol=%d\n", axp, supply, bias_vol_set);
			if(config_type == 1)
			{
				smc_writel(vol_index, port_bias_addr);
			}
			else
			{
				pmu_vol = axp_probe_supply_status_byname(axp, supply);
				if(pmu_vol < 0)
				{
					printf("sunxi board read %s %s failed\n", axp, supply);

					continue;
				}

				if(pmu_vol > bias_vol_set)	//pmu实际电压超过需要设置的电压
				{
					//电压降低到需要电压
					axp_set_supply_status_byname(axp, supply, bias_vol_set, 1);
					//设置寄存器
					smc_writel(vol_index, port_bias_addr);
				}
				else if(pmu_vol < bias_vol_set)	//pmu实际电压低于需要设置的电压
				{
					//设置寄存器
					smc_writel(vol_index, port_bias_addr);
					//把pmu电压调整到需要的电压
					axp_set_supply_status_byname(axp, supply, bias_vol_set, 1);
				}
				else
				{
					//如果实际电压等于需要设置电压,直接设置即可
					smc_writel(vol_index, port_bias_addr);
				}
			}
			printf("reg addr=0x%x, value=0x%x, pmu_vol=%d\n", port_bias_addr, smc_readl(port_bias_addr), bias_vol_set);
		}
		else
		{
			printf("config gpio bias voltage finish\n");

			break;
		}
	}

	return 0;
}
Esempio n. 11
0
u32 de_top_clk_enable(__disp_clk_id_t clk_id, s32 bOnOff)
{
	u32 i;
	u32 count;
	u32 reg_val;

	count = sizeof(disp_de_top_tbl) / sizeof(de_top_para);
	for(i = 0; i < count; i++)
	{
		if(disp_de_top_tbl[i].clk_id == clk_id)
		{
			if(bOnOff)
			{
				de_top_enable_count[i]++;
				if(de_top_enable_count[i] == 1)
				{
					if(disp_de_top_tbl[i].mod_enable_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].mod_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].mod_enable_shift, 1, reg_val, 1);
						smc_writel(reg_val, disp_de_top_tbl[i].mod_adr);
						__inf("clk %d mod enable\n", clk_id);
					}

					if(disp_de_top_tbl[i].ahb_gate_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].ahb_gate_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].ahb_gate_shift, 1, reg_val, 1);
						smc_writel(reg_val, disp_de_top_tbl[i].ahb_gate_adr);
						__inf("clk %d gate enable\n", clk_id);
					}

					if(disp_de_top_tbl[i].ahb_reset_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].ahb_reset_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].ahb_reset_shift, 1, reg_val, 1);
						smc_writel(reg_val, disp_de_top_tbl[i].ahb_reset_adr);
						__inf("clk %d reset enable\n", clk_id);
					}

					if(disp_de_top_tbl[i].dram_gate_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].dram_gate_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].dram_gate_shift, 1, reg_val, 1);
						smc_writel(reg_val, disp_de_top_tbl[i].dram_gate_adr);
						__inf("clk %d dram enable\n", clk_id);
					}
				}
			}
			else
			{
				if(de_top_enable_count[i] == 0)
				{
					__wrn("de top clk %d is already close\n", clk_id);
					return 0;
				}

				de_top_enable_count[i]--;
				if(de_top_enable_count[i] == 0)
				{
					if(disp_de_top_tbl[i].mod_enable_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].mod_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].mod_enable_shift, 1, reg_val, 0);
						smc_writel(reg_val, disp_de_top_tbl[i].mod_adr);
						__inf("clk %d mod disable\n", clk_id);
					}

					if(disp_de_top_tbl[i].ahb_gate_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].ahb_gate_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].ahb_gate_shift, 1, reg_val, 0);
						smc_writel(reg_val, disp_de_top_tbl[i].ahb_gate_adr);
						__inf("clk %d gate disable\n", clk_id);
					}

					if(disp_de_top_tbl[i].ahb_reset_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].ahb_reset_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].ahb_reset_shift, 1, reg_val, 0);
						smc_writel(reg_val, disp_de_top_tbl[i].ahb_reset_adr);
						__inf("clk %d reset disable\n", clk_id);
					}

					if(disp_de_top_tbl[i].dram_gate_shift < 32)
					{
						reg_val = smc_readl(disp_de_top_tbl[i].dram_gate_adr);
						reg_val = SET_BITS(disp_de_top_tbl[i].dram_gate_shift, 1, reg_val, 0);
						smc_writel(reg_val, disp_de_top_tbl[i].dram_gate_adr);
						__inf("clk %d dram disable\n", clk_id);
					}
				}
			}
		}
	}

	return 0;
}
Esempio n. 12
0
u32 de_top_clk_set_freq(__disp_clk_id_t clk_id, u32 nFreq)
{
	u32 i;
	u32 count;
	u32 src_freq;
	u32 reg_val;
	u32 div;
	__hdle hdl;

	count = sizeof(disp_clk_mod_tbl) / sizeof(clk_mod_para);
	for(i = 0; i < count; i++)
	{
		if(disp_clk_mod_tbl[i].clk_id == MOD_CLK_DETOP)
		{
			hdl = (__hdle)&disp_clk_mod_tbl[i];
			break;
		}

		__wrn("get detop clk fail\n");
		return 0;
	}

	src_freq = de_get_mclk_freq(hdl);

	if(src_freq == 0) {
		__wrn("get mod clk freq fail\n");
		return 0;
	}

	count = sizeof(disp_de_top_tbl) / sizeof(de_top_para);
	for(i = 0; i < count; i++)
	{
		if(disp_de_top_tbl[i].clk_id == clk_id)
		{
			nFreq = de_clk_freq;

			if(nFreq == 0)
			{
				nFreq = disp_de_top_tbl[i].freq;
			}

			if(nFreq == 0)
			{
				__wrn("de top set freq is 0\n");
				return 0;
			}

			div = (src_freq + nFreq / 2 - 1) / nFreq;

			if((div > 16) || (div < 1))
			{
				__wrn("de top clk div is overflow\n");
				return 0;
			}

			reg_val = smc_readl(disp_de_top_tbl[i].mod_div_adr);
			reg_val = SET_BITS(disp_de_top_tbl[i].mod_div_shift, 4, reg_val, (div -1));
			smc_writel(reg_val, disp_de_top_tbl[i].mod_div_adr);
			return 1;
		}
	}

	return 0;
}
Esempio n. 13
0
u32 de_mclk_enable(__hdle clk_hdl, s32 bOnOff)
{
	u32 i;
	u32 count;
	u32 reg_val;

	clk_mod_para *hdl = (clk_mod_para*)clk_hdl;
	__inf("mod %d clock enable\n", hdl->clk_id);
	count = sizeof(disp_clk_mod_tbl) / sizeof(clk_mod_para);
	for(i = 0; i < count; i++)
	{
		if(disp_clk_mod_tbl[i].clk_id == hdl->clk_id)
		{
			if(bOnOff)
			{
				mod_enable_count[i]++;
				if(mod_enable_count[i] == 1)
				{
					if(disp_clk_mod_tbl[i].mod_enable_shift < 32) {
						reg_val = smc_readl(disp_clk_mod_tbl[i].mod_adr);
						reg_val = SET_BITS(disp_clk_mod_tbl[i].mod_enable_shift, 1, reg_val, 1);
						__inf("mod clock %d enable on\n", hdl->clk_id);
						smc_writel(reg_val, disp_clk_mod_tbl[i].mod_adr);
					}

					if(disp_clk_mod_tbl[i].ahb_gate_shift < 32) {
						reg_val = smc_readl(disp_clk_mod_tbl[i].ahb_gate_adr);
						reg_val = SET_BITS(disp_clk_mod_tbl[i].ahb_gate_shift, 1, reg_val, 1);
						__inf("mod clock %d ahb gate on\n", hdl->clk_id);
						smc_writel(reg_val, disp_clk_mod_tbl[i].ahb_gate_adr);
					}

					if(disp_clk_mod_tbl[i].ahb_reset_shift < 32) {
						reg_val = smc_readl(disp_clk_mod_tbl[i].ahb_reset_adr);
						reg_val = SET_BITS(disp_clk_mod_tbl[i].ahb_reset_shift, 1, reg_val, 1);
						__inf("mod clock %d ahb reset on\n", hdl->clk_id);
						smc_writel(reg_val, disp_clk_mod_tbl[i].ahb_reset_adr);
					}

					if(disp_clk_mod_tbl[i].src_id)
					{
						de_pll_enable(disp_clk_mod_tbl[i].src_id, bOnOff);
					}
				}
				return 1;
			}
			else
			{
				if(mod_enable_count[i] == 0)
				{
					__wrn("mod %d is already disable\n", hdl->clk_id);
					break;
				}

				mod_enable_count[i]--;
				if(mod_enable_count[i] == 0)
				{
					if(disp_clk_mod_tbl[i].mod_enable_shift < 32) {
						reg_val = smc_readl(disp_clk_mod_tbl[i].mod_adr);
						reg_val = SET_BITS(disp_clk_mod_tbl[i].mod_enable_shift, 1, reg_val, 0);
						__inf("mod clock %d enable off\n", hdl->clk_id);
						smc_writel(reg_val, disp_clk_mod_tbl[i].mod_adr);
					}

					if(disp_clk_mod_tbl[i].ahb_gate_shift < 32) {
						reg_val = smc_readl(disp_clk_mod_tbl[i].ahb_gate_adr);
						reg_val = SET_BITS(disp_clk_mod_tbl[i].ahb_gate_shift, 1, reg_val, 0);
						__inf("mod clock %d ahb gate off\n", hdl->clk_id);
						smc_writel(reg_val, disp_clk_mod_tbl[i].ahb_gate_adr);
					}

					if(disp_clk_mod_tbl[i].ahb_reset_shift < 32) {
						reg_val = smc_readl(disp_clk_mod_tbl[i].ahb_reset_adr);
						reg_val = SET_BITS(disp_clk_mod_tbl[i].ahb_reset_shift, 1, reg_val, 0);
						__inf("mod clock %d ahb reset off\n", hdl->clk_id);
						smc_writel(reg_val, disp_clk_mod_tbl[i].ahb_reset_adr);
					}

					if(disp_clk_mod_tbl[i].src_id)
					{
						de_pll_enable(disp_clk_mod_tbl[i].src_id, bOnOff);
					}
				}

				return 1;
			}
		}
	}

	return 0;
}