void smurf_fts2_split(int* status)
{
if( *status != SAI__OK ) { return; }
const double STAGE_LENGTH = 450.0; /* mm */
int LR = 0; /* Treat as Low Resolution scan */
Grp* gIn = NULL; /* Input group */
Grp* gOut = NULL; /* Output group */
Grp* gTmp = NULL; /* Temporary group */
smfData* inData = NULL; /* Pointer to input data */
smfData* outData = NULL; /* Pointer to output data */
double* outData_pntr = NULL; /* Pointer to output data values array */
int nMirPos = 0; /* Number of frames where the mirror actually moves */
int nStart = 0; /* Frame index where the mirror starts moving */
int nStartNext = 0; /* Frame index where the mirror starts moving in the next scan */
int nStop = 0; /* Frame index where the mirror stops */
int lrStart = 0; /* Frame index where low resolution mirror limit starts */
int hrStop = 0; /* Frame index where high resolution mirror limit stops */
int hrStart = 0; /* Frame index where high resolution mirror limit starts */
int lrStop = 0; /* Frame index where low resolution mirror limit stops */
int lrCentre = 0; /* Frame index at centre of low resolution mirror positions */
int i = 0; /* Counter */
int j = 0; /* Counter */
int k = 0; /* Counter */
int n = 0; /* Counter */
double fNyquist = 0.0; /* Nyquist frequency */
double dz = 0.0; /* Step size in evenly spaced OPD grid */
double* MIRPOS = NULL; /* Mirror positions */
size_t nFiles = 0; /* Size of the input group */
size_t nOutFiles = 0; /* Size of the output group */
size_t fIndex = 0; /* File index */
size_t nWidth = 0; /* Data cube width */
size_t nHeight = 0; /* Data cube height */
size_t nFrames = 0; /* Data cube depth in input file */
size_t nFramesOut = 0; /* Data cube depth in output file */
size_t nFramesOutPrev = 0; /* Data cube depth in previous output file */
size_t hrFramesOut = 0; /* Data cube depth in high res output file */
size_t hrFramesOutPrev = 0; /* Data cube depth in previous high res output file */
size_t lrFramesOut = 0; /* Data cube depth in low res output file */
size_t lrFramesOutPrev = 0; /* Data cube depth in previous low res output file */
size_t nPixels = 0; /* Number of bolometers in the subarray */
char object[SZFITSTR];
char subarray[SZFITSTR];
char obsID[SZFITSTR];
char scanMode[SZFITSTR];
double scanVel = 0.0; /* Mirror speed in mm/sec */
double stepTime = 0.0; /* RTS step time, average sample rate */
double minOPD = 0; /* OPD minimum */
double maxOPD = 0; /* OPD maximum */
double ZPD = 0;
double lrmmBandPass = 0.0; /* low res mm +/- offset from centre */
int lrBandPassFrames = 0; /* Number of low res band pass frames from centre +/- length of lrmmBandPass */
int nTmp = 0;
int nMax = 0;
int nOPD = 0;
int bolIndex = 0;
int index = 0;
int indexIn = 0;
int indexOut = 0;
int badPixel = 0;
int k0 = 0;
int indexZPD = 0;
int done = 0; /* Track completion of extracting multiple scans */
int outDataCount = 0; /* The number of output data files being written */
double lenLeft,
lenRight,
minLenLeft,
minLenRight,
minLen,
minZPD,
maxZPD,
midZPD = 0.0; /* Mirror position half side measures */
int midZPDPos = 0; /* Middle ZPD position in mirror position array */
double EPSILON = 0.0;
char fileName[SMF_PATH_MAX+1];
char scanNumStr[5+1]; /* String form of scan number of the input file */
int scanNum = 0; /* Scan number of the input file */
int conNum = 0; /* Concatenation number of the input file (left shifted scanNum) */
int scanDir = 0; /* Scan direction: 1 -> back to front (positive), -1 -> front to back (negative) */
JCMTState *allState = NULL; /* Temporary buffer for reduced header allState array data */
/* Get Input, Output groups */
kpg1Rgndf("IN", 0, 1, "", &gIn, &nFiles, status);
kpg1Wgndf("OUT", gOut, nFiles, nFiles, "More output files expected!", &gOut, &nOutFiles, status);
/* Read in ADAM parameters */
parGet0d("BANDPASS", &lrmmBandPass, status); /* Low res mm band +/- offset from centre */
/* Treat as Low Resolution scan? */
if(lrmmBandPass > 0) {
LR = 1;
}
/* Eliminate the first record in the output group, since it will be replaced later */
gTmp = grpCopy(gOut, 1, 1, 1, status);
grpDelet(&gOut, status);
gOut = gTmp;
/* BEGIN NDF */
ndfBegin();
/* Loop through each input file */
for(fIndex = 1; fIndex <= nFiles; fIndex++) {
/* Open Observation file */
smf_open_file(gIn, fIndex, "READ", 0, &inData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to open the source file!", status);
goto CLEANUP;
}
smf_fits_getS(inData->hdr, "OBJECT", object, sizeof(object), status);
smf_fits_getS(inData->hdr, "SUBARRAY", subarray, sizeof(subarray), status);
smf_fits_getS(inData->hdr, "OBSID", obsID, sizeof(obsID), status);
smf_fits_getS(inData->hdr, "FTS_MODE", scanMode, sizeof(scanMode), status);
smf_fits_getD(inData->hdr, "SCANVEL", &scanVel, status);
smf_fits_getD(inData->hdr, "STEPTIME", &stepTime, status);
/* Nyquist frequency */
fNyquist = 10.0 / (8.0 * scanVel * stepTime);
dz = 1.0 / (2.0 * fNyquist);
EPSILON = scanVel * stepTime / 2;
/* Extract the scan number from the input file to be incremented in the output files */
one_strlcpy(scanNumStr, &(inData->file->name[strlen(inData->file->name) - 8]),
astMIN(SMF_PATH_MAX + 1, 5), status);
if (*status == ONE__TRUNC) {
errRep(FUNC_NAME, "Error extracting scanNumStr!", status);
errAnnul(status);
}
/* Create a temporary base file name from input file name */
one_strlcpy(fileName, inData->file->name,
astMIN(SMF_PATH_MAX + 1, strlen(inData->file->name) - 7), status);
if (*status == ONE__TRUNC) {
errRep(FUNC_NAME, "Error extracting base fileName!", status);
errAnnul(status);
}
scanNum = (int) one_strtod(scanNumStr, status);
if (*status != SAI__OK) {
errRep(FUNC_NAME, "Error extracting scanNum!", status);
errAnnul(status);
}
/* Left shift scanNum to conNum as a prefix to make output scan number unique */
if(scanNum < 100) {
conNum = scanNum * 100;
} else if(scanNum < 1000) {
conNum = scanNum * 10;
}
/*printf("%s: Processing file: %s, having basename: %s and scanNumStr: %s, scanNum: %04d\n",
TASK_NAME, inData->file->name, fileName, scanNumStr, scanNum);*/
/* Data cube dimensions */
nWidth = inData->dims[0];
nHeight = inData->dims[1];
nFrames = inData->dims[2];
nPixels = nWidth * nHeight;
/* Mirror positions in mm */
nTmp = nFrames;
MIRPOS = astCalloc(nFrames, sizeof(*MIRPOS));
fts2_getmirrorpositions(inData, MIRPOS, &nTmp, status); // (mm)
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "Unable to get the mirror positions!", status);
goto CLEANUP;
}
nStart = -1;
nStop = -1;
nStartNext = 0;
hrStart = -1;
hrStop = -1;
lrStart = -1;
lrStop = -1;
outDataCount = 0;
done = 0;
do {
/* Find the next range of single scan mirror positions for which to extract corresponding NDF data */
for(n=nStartNext; n<nFrames-1; n++){
if(hrStart < 0 && fabs(MIRPOS[n+1] - MIRPOS[n]) >= EPSILON) {
nStart = n;
hrStart = n;
/*printf("%s: Split nStart=%d\n", TASK_NAME, nStart);*/
}
if(hrStart >= 0 && hrStop < 0 && (fabs(MIRPOS[n+1] - MIRPOS[n]) < EPSILON || n+1 == nFrames-1)) {
hrStop = n+1;
hrFramesOutPrev = hrFramesOut;
hrFramesOut = abs(hrStop - hrStart) + 1;
outDataCount++;
nStop = hrStop;
nFramesOutPrev = hrFramesOutPrev;
nFramesOut = hrFramesOut;
/*printf("%s: Split: %d of %d frames found at hrStart=%d, hrStop=%d\n",
TASK_NAME, outDataCount, hrFramesOut, hrStart, hrStop);*/
break;
}
}
/* Determine scan direction */
if(MIRPOS[hrStart] < MIRPOS[hrStop]) {
scanDir = 1; /* Positive */
} else {
scanDir = -1; /* Negative */
}
/* Limit to specified mirror position range */
if(LR) {
/* Calculate how many frames correspond to the given +/- mm of LR bandpass */
lrBandPassFrames = lrmmBandPass / dz;
/* Find the centre of the current scan */
lrCentre = floor((abs(hrStop-hrStart)+1)/2);
/* Set low res start and stop values at corresponding frame offsets from centre */
lrStart = lrCentre - lrBandPassFrames;
lrStop = lrCentre + lrBandPassFrames;
lrFramesOutPrev = lrFramesOut;
lrFramesOut = abs(lrStop - lrStart) + 1;
nStart = lrStart;
nStop = lrStop;
nFramesOutPrev = lrFramesOutPrev;
nFramesOut = lrFramesOut;
/*printf("%s: LR Split: %d of %d frames found at lrStart=%d, lrStop=%d\n",
TASK_NAME, outDataCount, lrFramesOut, lrStart, lrStop);*/
}
/* Check for end of data condition */
if(hrStop < hrStart || hrStop >= nFrames-1) {
hrStop = nFrames-1;
done = 1;
}
/* Output scan if there is a start and stop position found,
and for the last scan if it's the only one
and if it's not too short (compared to the previous one) */
/*printf("%s: nStart=%d, nStop=%d, nFramesOutPrev=%d, nFramesOut=%d\n", TASK_NAME, nStart, nStop, nFramesOutPrev, nFramesOut);*/
if(nStart >=0 && nStop > 0 &&
(nFramesOutPrev == 0 ||
(nFramesOutPrev > 0 && nFramesOut > 0 && (double)hrFramesOut/(double)hrFramesOutPrev >= 0.5))) {
/* Copy single scan NDF data from input to output */
outData = smf_deepcopy_smfData(inData, 0, SMF__NOCREATE_DATA | SMF__NOCREATE_FTS, 0, 0, status);
outData->dtype = SMF__DOUBLE;
outData->ndims = 3;
outData->dims[0] = nWidth;
outData->dims[1] = nHeight;
outData->dims[2] = nFramesOut;
outData_pntr = (double*) astMalloc((nPixels * nFramesOut) * sizeof(*outData_pntr));
outData->pntr[0] = outData_pntr;
outData->hdr->nframes = nFramesOut;
for(i=0; i<nWidth; i++) {
for(j=0; j<nHeight; j++) {
bolIndex = i + j * nWidth;
for(k=nStart; k<=nStop; k++) {
indexIn = bolIndex + k * nPixels;
indexOut = bolIndex + (k-nStart) * nPixels;
*((double*)(outData->pntr[0]) + indexOut) = *((double*)(inData->pntr[0]) + indexIn);
}
}
}
/* Update the FITS headers */
outData->fts = smf_create_smfFts(status);
/* Update FITS component */
smf_fits_updateD(outData->hdr, "FNYQUIST", fNyquist, "Nyquist frequency (cm^-1)", status);
smf_fits_updateI(outData->hdr, "MIRSTART", 1, "Frame index in which the mirror starts moving", status);
smf_fits_updateI(outData->hdr, "MIRSTOP", nFramesOut, "Frame index in which the mirror stops moving", status);
smf_fits_updateI(outData->hdr, "SCANDIR", scanDir, "Scan direction", status);
smf_fits_updateD(outData->hdr, "OPDMIN", 0.0, "Minimum OPD", status);
smf_fits_updateD(outData->hdr, "OPDSTEP", 0.0, "OPD step size", status);
/* Update the JCMTSTATE header */
/* Reallocate outData header array memory to reduced size */
allState = (JCMTState*) astRealloc(outData->hdr->allState, nFramesOut * sizeof(*(outData->hdr->allState)));
if(*status == SAI__OK && allState) {
outData->hdr->allState = allState;
} else {
errRepf(TASK_NAME, "Error reallocating allState JCMTState header", status);
goto CLEANUP;
}
for(k=nStart; k<=nStop; k++) {
/* Copy over JCMTstate */
/*printf("%s: memcpy allState: %d to: %p from: %p size: %d\n",TASK_NAME, k,
(void *) &(outData->hdr->allState[k-nStart]), (void *) &(inData->hdr->allState[k]), sizeof(*(outData->hdr->allState)) );*/
memcpy( (void *) &(outData->hdr->allState[k-nStart]), (void *) &(inData->hdr->allState[k]), sizeof(*(outData->hdr->allState)) );
/*printf("%s: Scan: %d index: %d rts_num: %d\n", TASK_NAME, outDataCount, k-nStart, outData->hdr->allState[k-nStart].rts_num);*/
/*printf("%s: Scan: %d index: %d fts_pos: %f\n", TASK_NAME, outDataCount, k-nStart, outData->hdr->allState[k-nStart].fts_pos);*/
}
/* Write output */
/* Append unique suffix to fileName */
/* This must be modified by the concatenation file scan number to improve uniqueness */
n = one_snprintf(outData->file->name, SMF_PATH_MAX, "%s%04d_scn.sdf", status, fileName, conNum+outDataCount);
/*printf("%s: Writing outData->file->name: %s\n", TASK_NAME, outData->file->name);*/
if(n < 0 || n >= SMF_PATH_MAX) {
errRepf(TASK_NAME, "Error creating outData->file->name", status);
goto CLEANUP;
}
/* Update the list of output _scn file names */
grpPut1(gOut, outData->file->name, 0, status);
if(*status != SAI__OK) {
errRepf(TASK_NAME, "Error saving outData file name", status);
goto CLEANUP;
}
smf_write_smfData(outData, NULL, outData->file->name, gOut, fIndex, 0, MSG__VERB, 0, status);
if(*status != SAI__OK) {
errRepf(TASK_NAME, "Error writing outData file", status);
goto CLEANUP;
}
smf_close_file(&outData, status);
if(*status != SAI__OK) {
errRepf(TASK_NAME, "Error closing outData file", status);
goto CLEANUP;
}
if(*status != SAI__OK) {
errRepf(TASK_NAME, "Error closing outData file", status);
goto CLEANUP;
}
}/* else {
if(!(nStart >=0 && nStop)) printf("%s: Output scan condition failed: nStart(%d) >= nStop(%d) is FALSE\n",TASK_NAME, nStart, nStop);
if(!(nFramesOutPrev == 0 ||
(nFramesOutPrev > 0 && nFramesOut > 0 && (double)nFramesOut/(double)nFramesOutPrev >= 0.5))) printf("%s: Output scan condition failed: nFramesOutPrev(%d) == 0 || (nFramesOutPrev(%d) > 0 && nFramesOut(%d) > 0 && nFramesOut/nFramesOutPrev (%f) >= 0.5) is FALSE\n", TASK_NAME, nFramesOutPrev, nFramesOutPrev, nFramesOut, (double)nFramesOut/(double)nFramesOutPrev);
}*/
/* Prepare for next iteration */
nStartNext = hrStop + 1;
hrStart = -1;
hrStop = -1;
} while (!done);
/* Deallocate memory used by arrays */
if(MIRPOS) { MIRPOS = astFree(MIRPOS); }
/* Close the file */
smf_close_file(&inData, status);
}
CLEANUP:
/* Deallocate memory used by arrays */
if(inData) { smf_close_file(&inData, status); }
if(outData) { smf_close_file(&outData, status); }
/* END NDF */
ndfEnd(status);
/* Write out the list of output NDF names, annulling the error if a null
parameter value is supplied. */
if( *status == SAI__OK && gOut ) {
grpList( "OUTFILES", 0, 0, NULL, gOut, status );
if( *status == PAR__NULL ) {
errRep(FUNC_NAME, "Error writing OUTFILES!", status);
errAnnul( status );
}
}
/* Delete groups */
if(gIn) { grpDelet(&gIn, status); }
if(gOut) { grpDelet(&gOut, status); }
}
void smurf_fts2_spectrum(int* status)
{
if( *status != SAI__OK ) { return; }
const char* dataLabel = "Spectrum"; /* Data label */
Grp* gIn = NULL; /* Input group */
Grp* gOut = NULL; /* Output group */
Grp* gSfp = NULL; /* SFP group */
smfData* inData = NULL; /* Pointer to input data */
smfData* outData = NULL; /* Pointer to output data */
smfData* sfpData = NULL; /* Pointer to SFP data */
/*smfData* sfp = NULL;*/ /* Pointer to SFP index data */
int doSFP = 0; /* Only apply SFP if given */
int zeropad = 1; /* Determines whether to zeropad */
double resolution = 0.0; /* Spectral Resolution */
double resolutionin = 0.0; /* Spectral Resolution input */
double resolutionzp = 0.0; /* Spectral Resolution zero padded */
double resolution_override= 0.0; /* Spectral Resolution override */
int i = 0; /* Counter */
int j = 0; /* Counter */
int k = 0; /* Counter */
int l = 0; /* Counter */
double fNyquist = 0.0; /* Nyquist frequency */
double fNyquistin = 0.0; /* Nyquist frequency input */
double fNyquistzp = 0.0; /* Nyquist frequency zero padded */
double dSigma = 0.0; /* Spectral Sampling Interval */
double dSigmain = 0.0; /* Spectral Sampling Interval zero padded */
double dSigmazp = 0.0; /* Spectral Sampling Interval zero padded */
double* IFG = NULL; /* Interferogram */
double* SFP = NULL; /* Spectral Filter Profile for all pixels */
double* SFPij = NULL; /* Spectral Filter Profile for a single pixel */
double wavelen = 0.0; /* The central wave length of the subarray filter (m) */
double wnSfpFirst = 10.600; /* Starting 850 band SFP wave number */
double wnSfpLast = 12.800; /* Ending 850 band SFP wave number */
double wnSfp850First = 11.220; /* Starting 850 band SFP wave number */
double wnSfp850Last = 12.395; /* Ending 850 band SFP wave number */
/*double wnSfp850First = 10.600;*/ /* Starting 850 band SFP wave number */
/*double wnSfp850Last = 12.800;*/ /* Ending 850 band SFP wave number */
double wnSfp450First = 21.630; /* Starting 450 band SFP wave number */
double wnSfp450Last = 23.105; /* Ending 450 band SFP wave number */
double wnSfpFirst_override= 0.0; /* Starting SFP wave number override */
double wnSfpLast_override = 0.0; /* Ending SFP wave number override */
double wnSfpResolution = 0.025; /* The resolution of the SFP wave numbers (1/cm) */
double wnSfpF = 0.0; /* Starting SFP wave number */
double wnSfpL = 0.0; /* Ending SFP wave number */
double* WN = NULL; /* Wave Numbers from SFP */
double* DS = NULL; /* Double Sided Interferogram */
fftw_complex* DSIN = NULL; /* Double-Sided interferogram, FFT input */
fftw_complex* SPEC = NULL; /* Spectrum */
fftw_plan plan = NULL; /* fftw plan */
gsl_interp_accel* ACC = NULL; /* SFP interpolator */
gsl_spline* SPLINE = NULL; /* SFP interpolation spline */
size_t nFiles = 0; /* Size of the input group */
size_t nOutFiles = 0; /* Size of the output group */
size_t nSFPFiles = 0; /* Size of the SFP group */
size_t nSfp = 89; /* Number of SFP calibration file values */
size_t fIndex = 0; /* File index */
size_t nWidth = 32; /* Data cube width */
size_t nHeight = 40; /* Data cube height */
size_t nFrames = 0; /* Data cube depth */
size_t nPixels = nWidth*nHeight; /* Number of bolometers in the subarray */
double dIntensity = 0;
int N = 0;
int Nin = 0; /* N input */
int Nzp = 0; /* N zero padded */
int N2 = 0;
int N2in = 0; /* N/2 input */
int N2zp = 0; /* N/2 zero padded */
int bolIndex = 0;
int cubeIndex = 0;
int badPixel = 0;
int indexZPD = 0;
int indexZPDin = 0;
int indexZPDzp = 0;
int pad = 0; /* zero padding (difference between input and zero padded interferogram length) */
int pad2 = 0; /* zero padding / 2 */
double dx = 0.0; /* Delta x */
double dxin = 0.0; /* Delta x input */
double dxzp = 0.0; /* Delta x zero padded */
double OPDMax = 0.0; /* OPD max in cm */
double OPDMaxin = 0.0; /* OPD max in cm input */
double OPDMaxzp = 0.0; /* OPD max in cm zero padded */
double s = 0.0; /* spectrum value */
double f = 0.0; /* filter value */
#define DEBUG 0
/* Get Input & Output groups */
kpg1Rgndf("IN", 0, 1, "", &gIn, &nFiles, status);
kpg1Wgndf("OUT", gOut, nFiles, nFiles, "Equal number of input and output files expected!", &gOut, &nOutFiles, status);
kpg1Gtgrp("SFP", &gSfp, &nSFPFiles, status);
if(*status != SAI__OK) {
/* TODO: Check for any other possible error conditions */
/* Assume SFP calibration file not given, and proceed without it */
doSFP = 0;
*status = SAI__OK;
} else {
if(nSFPFiles > 0) doSFP = 1;
}
/* Read in ADAM parameters */
parGet0i("ZEROPAD", &zeropad, status);
/* Resolution */
parGet0d("RESOLUTION", &resolution_override, status);
if(doSFP) {
/* SFP WN Range overrides */
parGet0d("WNSFPFIRST", &wnSfpFirst_override, status);
if(*status != SAI__OK) {
*status = SAI__OK; /* Allow null */
wnSfpFirst_override = 0.0;
}
parGet0d("WNSFPLAST", &wnSfpLast_override, status);
if(*status != SAI__OK) {
*status = SAI__OK; /* Allow null */
wnSfpLast_override = 0.0;
}
}
/* BEGIN NDF */
ndfBegin();
/* Loop through each input file */
for(fIndex = 1; fIndex <= nFiles; fIndex++) {
/* Open Observation file */
smf_open_file(NULL, gIn, fIndex, "READ", SMF__NOFIX_METADATA, &inData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to open the source file!", status);
goto CLEANUP;
}
/* Data cube dimensions */
nWidth = inData->dims[0];
nHeight = inData->dims[1];
nFrames = inData->dims[2];
nPixels = nWidth * nHeight;
/*printf("%s: nWidth=%d, nHeight=%d, nPixels=%d, nFrames=%d\n", TASK_NAME, nWidth, nHeight, nPixels, nFrames);*/
/* Check if the file is initialized for FTS2 processing */
if(!(inData->fts)) {
*status = SAI__ERROR;
errRep( FUNC_NAME, "The file is NOT initialized for FTS2 data reduction!", status);
goto CLEANUP;
}
/* Read in the Nyquist frequency from FITS component */
smf_fits_getD(inData->hdr, "FNYQUIST", &fNyquist, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to find the Nyquist frequency in FITS component!", status);
goto CLEANUP;
}
/* Read in the wave length (m) from the FITS header to determine the band */
smf_fits_getD(inData->hdr, "WAVELEN", &wavelen, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to find the wavelen in the FITS header!", status);
goto CLEANUP;
}
/* Set WN SFP range according to band */
if(wavelen == 0.00085) {
wnSfpFirst = wnSfp850First;
wnSfpLast = wnSfp850Last;
} else if(wavelen == 0.00045) {
wnSfpFirst = wnSfp450First;
wnSfpLast = wnSfp450Last;
}
/*printf("%s: wnSfpFirst_override=%f, wnSfpLast_override=%f\n", TASK_NAME, wnSfpFirst_override, wnSfpLast_override);*/
/*printf("%s: wnSfpFirst=%f, wnSfpLast=%f\n", TASK_NAME, wnSfpFirst, wnSfpLast);*/
if(wnSfpFirst_override) {
wnSfpF = wnSfpFirst_override;
} else {
wnSfpF = wnSfpFirst;
}
if(wnSfpLast_override) {
wnSfpL = wnSfpLast_override;
} else {
wnSfpL = wnSfpLast;
}
/*printf("%s: wnSfpF=%f, wnSfpL=%f\n", TASK_NAME, wnSfpF, wnSfpL);*/
fNyquistin = fNyquistzp = 0.0;
dx = dxin = dxzp = 0.0;
N2 = N2in = N2zp = 0;
indexZPD = indexZPDin = indexZPDzp = 0;
N = Nin = Nzp = 0;
dSigma = dSigmain = dSigmazp = 0.0;
fNyquistin = fNyquist;
dxin = (1/(2*fNyquistin));
N2in = (nFrames / 2);
indexZPDin = N2in - 1;
Nin = 2 * N2in;
OPDMaxin = N2in * dxin;
if(resolution_override > 0.0) {
resolution = resolution_override;
resolutionin = resolution_override;
} else {
resolution = 1 / (2 * OPDMaxin);
resolutionin = resolution;
}
dSigmain = fNyquistin / N2in;
if(zeropad) {
if(DEBUG) {
/* Make the zero-padded array twice the size of the input */
fNyquistzp = fNyquist;
Nzp = N2in * 4;
N2zp = Nzp / 2;
dxzp = 1 / (2 * fNyquistzp);
OPDMaxzp = N2zp * dxzp;
dSigmazp = fNyquistzp / N2zp;
resolutionzp = 1 / (2 * OPDMaxzp);
} else {
/* Round Nyquist frequency down to nearest integer, for calculation convenience
fNyquistzp = floor(fNyquist);
smf_fits_updateD(inData->hdr, "FNYQUIST", fNyquistzp, "Nyquist frequency (cm^-1)", status);*/
/* Never change nyquist when zero padding */
fNyquistzp = fNyquist;
/* If resolution > 0.05, then round down to nearest 0.05 value, else set to 0.005 */
/* Calculate resolution as 1 / (2*OPDMax) */
/* Calculate OPDMax as N2 * dx */
if(resolution_override) {
resolutionzp = resolution_override;
} else {
if(resolution > 0.05) {
resolutionzp = floor(resolution/0.05) * 0.05;
} else {
resolutionzp = 0.005;
}
}
/* Calculate OPDMaxOut as 1 / (2 * resolutionzp) */
OPDMaxzp = 1 / (2 * resolutionzp);
/* Calculate N2 */
dxzp = (1/(2*fNyquistzp));
N2zp = (OPDMaxzp / dxzp);
indexZPDzp = N2zp - 1;
Nzp = 2 * N2zp;
dSigmazp = fNyquistzp / N2zp;
}
}
/*printf("%s: Nin=%d, Nzp=%d, N2in=%d, N2zp=%d, indexZPDin=%d, indexZPDzp=%d, dSigmain=%f, dSigmazp=%f, fNyquistin=%f, fNyquistzp=%f, dxin=%f, dxzp=%f, OPDMaxin=%f, OPDMaxzp=%f, resolutionin=%f, resolutionzp=%f\n",
TASK_NAME, Nin, Nzp, N2in, N2zp, indexZPDin, indexZPDzp, dSigmain, dSigmazp, fNyquistin, fNyquistzp, dxin, dxzp, OPDMaxin, OPDMaxzp, resolutionin, resolutionzp);*/
if(zeropad) {
N = Nzp;
N2 = N2zp;
indexZPD = indexZPDzp;
dSigma = dSigmazp;
fNyquist = fNyquistzp;
dx = dxzp;
OPDMax = OPDMaxzp;
resolution = resolutionzp;
} else {
N = Nin;
N2 = N2in;
indexZPD = indexZPDin;
dSigma = dSigmain;
fNyquist = fNyquistin;
dx = dxin;
OPDMax = OPDMaxin;
resolution = resolutionin;
}
/* Save wavenumber factor to FITS extension */
smf_fits_updateD(inData->hdr, "WNFACT", dSigma, "Wavenumber factor cm^-1", status);
/* TODO: Update mirror positions */
smf_fits_updateI(inData->hdr, "MIRSTART", 0, "Frame index in which the mirror starts moving", status);
smf_fits_updateI(inData->hdr, "MIRSTOP", N2, "Frame index in which the mirror stops moving", status);
/*smf_fits_updateD(inData->hdr, "OPDMIN", OPD_EVEN[0], "Minimum OPD", status);
smf_fits_updateD(inData->hdr, "OPDSTEP", dx, "OPD step size", status);*/
/* Copy input data into output data */
outData = smf_deepcopy_smfData(NULL, inData, 0, SMF__NOCREATE_DATA, 0, 0, status);
outData->dtype = SMF__DOUBLE;
outData->ndims = 3;
outData->dims[0] = nWidth;
outData->dims[1] = nHeight;
outData->dims[2] = N2+1;
outData->pntr[0] = (double*) astMalloc((nPixels * (N2+1)) * sizeof(double));
if (dataLabel) { one_strlcpy(outData->hdr->dlabel, dataLabel, sizeof(outData->hdr->dlabel), status ); }
/* Allocate memory for arrays */
IFG = astCalloc(N, sizeof(*IFG));
DS = astCalloc(N, sizeof(*DS));
DSIN = fftw_malloc(N * sizeof(*DSIN));
SPEC = fftw_malloc(N * sizeof(*SPEC));
/* Initialize arrays */
for(k = 0; k < N; k++) { SPEC[k][0] = SPEC[k][1] = DSIN[k][0] = DSIN[k][1] = DS[k] = IFG[k] = 0.0; }
/* Open the SFP calibration file, if given */
if(doSFP) {
smf_open_file(NULL, gSfp, 1, "READ", SMF__NOCREATE_QUALITY, &sfpData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to open the SFP calibration file!", status);
goto CLEANUP;
}
/* Read in the number of data elements */
nSfp = sfpData->dims[1] / nPixels;
/* Allocate memory for arrays */
SFP = astCalloc(nSfp*nPixels, sizeof(*SFP));
SFPij = astCalloc(nSfp, sizeof(*SFP));
WN = astCalloc(nSfp, sizeof(*WN));
/* DEBUG: Dispay SFP data */
/*printf("smurf_fts2_spectrum ([%d,%d,%d] elements): WN, SFP\n", (int)sfpData->dims[0],(int)sfpData->dims[1],(int)sfpData->dims[2]);*/
for(k=0;k<nSfp;k++){
/* printf("WN:%.3f,SFP:%.10f\n", *((double*) (sfpData->pntr[0]) + i), *((double*) (sfpData->pntr[0]) + i+1)); */
/* Adjust starting and ending wave number ranges for 450 or 850 bands */
if(wavelen == 0.00085 || wavelen == 0.00045) {
WN[k] = wnSfpFirst + k * wnSfpResolution;
} else {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unexpected WAVELEN value found in the FITS header!", status);
goto CLEANUP;
}
/*printf("SFP WN[%d]=%f\n",k,WN[k]);*/
for(j=0;j<nHeight;j++) {
for(i=0;i<nWidth;i++) {
bolIndex = i + j * nWidth;
cubeIndex = bolIndex + k * nPixels;
SFP[cubeIndex] = *((double*) (sfpData->pntr[0]) + cubeIndex);
/*if(i==10 && j==20) printf("SFP i:%d,j:%d,k:%d,bolIndex:%d,cubeIndex:%d=%f\n",i,j,k,bolIndex,cubeIndex,SFP[cubeIndex]);*/
}
}
}
/*printf("smurf_fts2_spectrum DEBUG: early exiting!\n");
exit(0); */
/* Create a 2D SFP index array and store it in the file, if given
sfp = smf_create_smfData(SMF__NOCREATE_DA | SMF__NOCREATE_FTS, status);
sfp->dtype = SMF__INTEGER;
sfp->ndims = 2;
sfp->dims[0] = nSfp;
sfp->dims[1] = 2;
sfp->pntr[0] = (int*) astCalloc(nSfp*2, sizeof(double));
// By default set ZPD indices to a bad value
for(i = 0; i < nSfp; i++) {
for(j = 0; j < 2; j++) {
bolIndex = i + j * 2;
*((int*) (sfp->pntr[0]) + bolIndex) = VAL__BADI;
}
} */
/* Prepare GSL interpolator to convert SFP data to this spectrum's resolution */
ACC = gsl_interp_accel_alloc();
SPLINE = gsl_spline_alloc(gsl_interp_cspline, nSfp);
}
for(i = 0; i < nWidth; i++) {
for(j = 0; j < nHeight; j++) {
bolIndex = i + j * nWidth;
badPixel = 0;
for(k = 0; k < Nin; k++) {
dIntensity = *((double*)(inData->pntr[0]) + (bolIndex + k * nPixels));
if(dIntensity == VAL__BADD) {
badPixel = 1;
break;
}
}
/* If this is a bad pixel, go to next */
if(badPixel) {
for(k = 0; k <= N2in; k++) {
*((double*)(outData->pntr[0]) + (bolIndex + k * nPixels)) = VAL__BADD;
}
continue;
}
/* Double-Sided interferogram */
if(zeropad) {
pad = Nzp - Nin;
pad2 = pad / 2;
/* Copy the right half of the input into the left half of this IFG, zero padded in the middle */
for(k=indexZPDin; k<Nin; k++) {
/*printf("%s: IFG: indexZPDin=%d, indexZPDzp=%d, Nin=%d, Nzp=%d, k=%d, l=%d\n", TASK_NAME, indexZPDin, indexZPDzp, Nin, Nzp, k, l);*/
IFG[k - indexZPDin] = *((double*)(inData->pntr[0]) + (bolIndex + k * nPixels));
/*if(i==16 && j==25) {
printf("%s: Pixel[%d,%d]: (L<-R) IFG[k(%d)-indexZPDin(%d)=%d] = inData->pntr[bolIndex(%d)+k(%d)*nPixels(%d)=%d] = %g\n",
TASK_NAME, i, j, k, indexZPDin, (k - indexZPDin), bolIndex, k, nPixels, (bolIndex + k * nPixels), IFG[k - indexZPDin]);
}*/
}
/* Copy the left half of the input into the right half of this IFG, zero padded in the middle */
for(k=0,l=0; k<indexZPDin; k++) {
IFG[Nzp - indexZPDin + k] = *((double*)(inData->pntr[0]) + (bolIndex + k * nPixels));
/*if(i==16 && j==25) {
printf("%s: Pixel[%d,%d]: (L->R) IFG[Nzp(%d)-indexZPDin(%d)+k(%d)=%d] = inData->pntr[bolIndex(%d)+k(%d)*nPixels(%d)=%d] = %g\n",
TASK_NAME, i, j, Nzp, indexZPDin, k, (Nzp-indexZPDin+k), bolIndex, k, nPixels, (bolIndex+k*nPixels), IFG[Nzp-indexZPDin+k]);
}*/
}
} else {
/* Copy the right half of the input into the left half of this IFG */
for(k=indexZPD; k<N; k++) {
IFG[k - indexZPD] = *((double*)(inData->pntr[0]) + (bolIndex + k * nPixels));
/*if(i==16 && j==25) {
printf("%s: Pixel[%d,%d]: (L<-R) IFG[k(%d)-indexZPD(%d)=%d] = inData->pntr[bolIndex(%d)+k(%d)*nPixels(%d)=%d] = %f\n",
TASK_NAME, i, j, k, indexZPD, (k - indexZPD), bolIndex, k, nPixels, (bolIndex + k * nPixels), IFG[k - indexZPD]);
}*/
}
/* Copy the left half of the input into the right half of this IFG */
for(k=0; k<indexZPD; k++) {
IFG[N - indexZPD + k] = *((double*)(inData->pntr[0]) + (bolIndex + k * nPixels));
/*if(i==16 && j==25) {
printf("%s: Pixel[%d,%d]: (L->R) IFG[N(%d)-indexZPD(%d)+k(%d)=%d] = inData->pntr[bolIndex(%d)+k(%d)*nPixels(%d)=%d] = %f\n",
TASK_NAME, i, j, N, indexZPD, k, (N - indexZPD + k), bolIndex, k, nPixels, (bolIndex + k * nPixels), IFG[N - indexZPD + k]);
}*/
}
}
/* DEBUG: Write out input data
for(k = 0; k < Nin; k++) {
*((double*)(outData->pntr[0]) + (bolIndex + nPixels * k)) =
*((double*)( inData->pntr[0]) + (bolIndex + nPixels * k));
if(i==16 && j==25) {
printf("%s: inData[%d,%d,%d]=%g\n",TASK_NAME, i, j, k, *((double*)( inData->pntr[0]) + (bolIndex + nPixels * k)));
}
} */
/* DEBUG: Write out the shifted IFG
for(k = 0; k < N; k++) {
*((double*)(outData->pntr[0]) + (bolIndex + k* nPixels)) = IFG[k];
if(i==16 && j==25) {
printf("%s: IFG[%d,%d,%d]=%g\n",TASK_NAME, i, j, k, IFG[k]);
}
} */
/* Convert real-valued interferogram to complex-valued interferogram */
for(k = 0; k < N; k++) { DSIN[k][0] = IFG[k]; DSIN[k][1] = 0.0; }
/* DEBUG: Write out DSIN
for(k = 0; k < N; k++) {
*((double*)(outData->pntr[0]) + (bolIndex + k * nPixels)) = DSIN[k][0];
if(i==16 && j==25) {
printf("%s: DSIN[%d,%d,%d]=%g\n",TASK_NAME, i, j, k, DSIN[k][0]);
}
} */
/* FFT Double-sided complex-valued interferogram */
plan = fftw_plan_dft_1d(N, DSIN, SPEC, FFTW_FORWARD, FFTW_ESTIMATE);
fftw_execute(plan);
/* Normalize spectrum */
for(k=0;k<N;k++) { SPEC[k][0] = SPEC[k][0] / (double)(N * resolution); }
/* Apply SFP calibration, if given */
if(doSFP){
/* Get the SFP for this pixel */
for(k=0;k<nSfp;k++) { SFPij[k] = SFP[i + j*nWidth + k*nPixels]; }
/* Interpolate the SFP values from its original WN scale to the current spectrum scale */
gsl_spline_init(SPLINE, WN, SFPij, nSfp);
/* Divide the spectrum in the band pass region by the interpolated SFP value at each position */
for(k = 0; k < N; k++) {
/*if(k*dSigma >= WN[0] && k*dSigma <= WN[nSfp-1]) {*/
if(k*dSigma >= wnSfpF && k*dSigma <= wnSfpL) {
f = gsl_spline_eval(SPLINE, k*dSigma, ACC);
/*index = bolIndex + nPixels * k;*/
s = SPEC[k][0];
SPEC[k][0] = s / f;
/*if(i==10 && j==20) { printf("SFP i=%d, j=%d, k=%d, dSigma=%f, k*dSigma=%f, s=%f, f=%f, s/f=%f, \n", i, j, k, dSigma, k*dSigma, s, f, s/f); }*/
}
}
}
/* Write out the positive real component of the spectrum */
for(k = 0; k <= N2; k++) {
*((double*)(outData->pntr[0]) + (bolIndex + k * nPixels)) = SPEC[k][0];
/*if(i==16 && j==25) {
printf("%s: SPEC[%d,%d,%d]=%E\n",TASK_NAME, i, j, k, SPEC[k][0] / (double)(N * resolution));
}*/
}
/* Destroy each allocated plan */
if(plan) { fftw_destroy_plan(plan); }
}
}
/* Deallocate memory used by arrays */
if(IFG) { IFG = astFree(IFG); }
if(DS) { DS = astFree(DS); }
if(SFP) { SFP = astFree(SFP); }
if(SFPij) { SFPij = astFree(SFPij); }
if(WN) { WN = astFree(WN); }
if(DSIN) { fftw_free(DSIN); DSIN = NULL; }
if(SPEC) { fftw_free(SPEC); SPEC = NULL; }
if(ACC) { gsl_interp_accel_free(ACC); ACC = NULL; }
if(SPLINE) { gsl_spline_free(SPLINE); SPLINE = NULL; }
/* Close the file */
if(inData) {
smf_close_file( NULL,&inData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to close the input file!", status);
goto CLEANUP;
}
}
/* Write output */
/* outData->fts = smf_construct_smfFts(NULL, sfp, fpm, sigma, status); // TODO: Add interpolated SFP to FITS header */
smf_write_smfData(NULL, outData, NULL, NULL, gOut, fIndex, 0,
MSG__VERB, 0, NULL, NULL, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to write the output file!", status);
goto CLEANUP;
}
smf_close_file( NULL,&outData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "Unable to close the output file!", status);
goto CLEANUP;
}
}
CLEANUP:
if(IFG) { IFG = astFree(IFG); }
if(DS) { DS = astFree(DS); }
if(SFP) { SFP = astFree(SFP); }
if(SFPij) { SFPij = astFree(SFPij); }
if(WN) { WN = astFree(WN); }
if(DSIN) { fftw_free(DSIN); DSIN = NULL; }
if(SPEC) { fftw_free(SPEC); SPEC = NULL; }
if(ACC) { gsl_interp_accel_free(ACC); ACC = NULL; }
if(SPLINE) { gsl_spline_free(SPLINE); SPLINE = NULL; }
/* Close files if still open */
if(inData) {
smf_close_file( NULL,&inData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "CLEANUP: Unable to close the input file!", status);
}
}
if(outData) {
smf_close_file( NULL,&outData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "CLEANUP: Unable to close the output file!", status);
}
}
if(sfpData) {
smf_close_file( NULL,&sfpData, status);
if(*status != SAI__OK) {
*status = SAI__ERROR;
errRep(FUNC_NAME, "CLEANUP: Unable to close the SFP file!", status);
}
}
/* END NDF */
ndfEnd(status);
/* Delete Groups */
if(gIn) grpDelet(&gIn, status);
if(gOut) grpDelet(&gOut, status);
if(gSfp) grpDelet(&gSfp, status);
}
