Esempi in C++ (Cpp) per spl_boot_mode

Esempio n. 1

File: spl_mmc.c Progetto: angelbbs/sunxi-u-boot-ZX803

void spl_mmc_load_image(void)
{
	struct mmc *mmc;
	int err;
	u32 boot_mode;

	mmc_initialize(gd->bd);
	/* We register only one device. So, the dev id is always 0 */
	mmc = find_mmc_device(0);
	if (!mmc) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
		puts("spl: mmc device not found!!\n");
#endif
		hang();
	}

	err = mmc_init(mmc);
	if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
		printf("spl: mmc init failed: err - %d\n", err);
#endif
		hang();
	}

	boot_mode = spl_boot_mode();
	if (boot_mode == MMCSD_MODE_RAW) {
		debug("boot mode - RAW\n");
#ifdef CONFIG_SPL_OS_BOOT
		if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
#endif
		err = mmc_load_image_raw(mmc,
					 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#ifdef CONFIG_SPL_FAT_SUPPORT
	} else if (boot_mode == MMCSD_MODE_FAT) {
		debug("boot mode - FAT\n");

		err = fat_register_device(&mmc->block_dev,
					  CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
		if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
			printf("spl: fat register err - %d\n", err);
#endif
			hang();
		}

#ifdef CONFIG_SPL_OS_BOOT
		if (spl_start_uboot() || mmc_load_image_fat_os(mmc))
#endif
		err = mmc_load_image_fat(mmc, CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
#endif
	} else {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
		puts("spl: wrong MMC boot mode\n");
#endif
		hang();
	}

	if (err)
		hang();
}

Esempio n. 2

File: spl_mmc.c Progetto: kontar/u-boot

void spl_mmc_load_image(void)
{
	struct mmc *mmc;
	int err;
	u32 boot_mode;

	mmc_initialize(gd->bd);
	/* We register only one device. So, the dev id is always 0 */
	mmc = find_mmc_device(0);
	if (!mmc) {
		puts("spl: mmc device not found!!\n");
		hang();
	}

	err = mmc_init(mmc);
	if (err) {
		printf("spl: mmc init failed: err - %d\n", err);
		hang();
	}
	boot_mode = spl_boot_mode();
	if (boot_mode == MMCSD_MODE_RAW) {
		debug("boot mode - RAW\n");
		mmc_load_image_raw(mmc);
#ifdef CONFIG_SPL_FAT_SUPPORT
	} else if (boot_mode == MMCSD_MODE_FAT) {
		debug("boot mode - FAT\n");
		mmc_load_image_fat(mmc);
#endif
	} else {
		puts("spl: wrong MMC boot mode\n");
		hang();
	}
}

Esempio n. 3

File: spl_mmc.c Progetto: UnicronNL/u-boot

int spl_mmc_load_image(void)
{
	struct mmc *mmc;
	int err;
	u32 boot_mode;

	mmc_initialize(gd->bd);
	/* We register only one device. So, the dev id is always 0 */
	mmc = find_mmc_device(0);
	if (!mmc) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
		puts("spl: mmc device not found!!\n");
#endif
		return -1;
	}

	err = mmc_init(mmc);
	if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
		printf("spl: mmc init failed: err - %d\n", err);
#endif
		return -1;
	}

	boot_mode = spl_boot_mode();
	if (boot_mode == MMCSD_MODE_RAW) {
		debug("boot mode - RAW\n");
#ifdef CONFIG_SPL_OS_BOOT
		if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
#endif
		err = mmc_load_image_raw(mmc,
			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#ifdef CONFIG_SPL_FAT_SUPPORT
	} else if (boot_mode == MMCSD_MODE_FAT) {
		debug("boot mode - FAT\n");
#ifdef CONFIG_SPL_OS_BOOT
		if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev,
								CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION))
#endif
		err = spl_load_image_fat(&mmc->block_dev,
					CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION,
					CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
#endif
#ifdef CONFIG_SUPPORT_EMMC_BOOT
	} else if (boot_mode == MMCSD_MODE_EMMCBOOT) {
		/*
		 * We need to check what the partition is configured to.
		 * 1 and 2 match up to boot0 / boot1 and 7 is user data
		 * which is the first physical partition (0).
		 */
		int part = (mmc->part_config >> 3) & PART_ACCESS_MASK;

		if (part == 7)
			part = 0;

		if (mmc_switch_part(0, part)) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
			puts("MMC partition switch failed\n");
#endif
			return -1;
		}
#ifdef CONFIG_SPL_OS_BOOT
		if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
#endif
		err = mmc_load_image_raw(mmc,
			CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#endif
	} else {