/*
** Prepare the two insert statements - Fts5Storage.pInsertContent and
** Fts5Storage.pInsertDocsize - if they have not already been prepared.
** Return SQLITE_OK if successful, or an SQLite error code if an error
** occurs.
*/
static int fts5StorageGetStmt(
Fts5Storage *p, /* Storage handle */
int eStmt, /* FTS5_STMT_XXX constant */
sqlite3_stmt **ppStmt, /* OUT: Prepared statement handle */
char **pzErrMsg /* OUT: Error message (if any) */
){
int rc = SQLITE_OK;
/* If there is no %_docsize table, there should be no requests for
** statements to operate on it. */
assert( p->pConfig->bColumnsize || (
eStmt!=FTS5_STMT_REPLACE_DOCSIZE
&& eStmt!=FTS5_STMT_DELETE_DOCSIZE
&& eStmt!=FTS5_STMT_LOOKUP_DOCSIZE
));
assert( eStmt>=0 && eStmt<ArraySize(p->aStmt) );
if( p->aStmt[eStmt]==0 ){
const char *azStmt[] = {
"SELECT %s FROM %s T WHERE T.%Q >= ? AND T.%Q <= ? ORDER BY T.%Q ASC",
"SELECT %s FROM %s T WHERE T.%Q <= ? AND T.%Q >= ? ORDER BY T.%Q DESC",
"SELECT %s FROM %s T WHERE T.%Q=?", /* LOOKUP */
"INSERT INTO %Q.'%q_content' VALUES(%s)", /* INSERT_CONTENT */
"REPLACE INTO %Q.'%q_content' VALUES(%s)", /* REPLACE_CONTENT */
"DELETE FROM %Q.'%q_content' WHERE id=?", /* DELETE_CONTENT */
"REPLACE INTO %Q.'%q_docsize' VALUES(?,?)", /* REPLACE_DOCSIZE */
"DELETE FROM %Q.'%q_docsize' WHERE id=?", /* DELETE_DOCSIZE */
"SELECT sz FROM %Q.'%q_docsize' WHERE id=?", /* LOOKUP_DOCSIZE */
"REPLACE INTO %Q.'%q_config' VALUES(?,?)", /* REPLACE_CONFIG */
"SELECT %s FROM %s AS T", /* SCAN */
};
Fts5Config *pC = p->pConfig;
char *zSql = 0;
switch( eStmt ){
case FTS5_STMT_SCAN:
zSql = sqlite3_mprintf(azStmt[eStmt],
pC->zContentExprlist, pC->zContent
);
break;
case FTS5_STMT_SCAN_ASC:
case FTS5_STMT_SCAN_DESC:
zSql = sqlite3_mprintf(azStmt[eStmt], pC->zContentExprlist,
pC->zContent, pC->zContentRowid, pC->zContentRowid,
pC->zContentRowid
);
break;
case FTS5_STMT_LOOKUP:
zSql = sqlite3_mprintf(azStmt[eStmt],
pC->zContentExprlist, pC->zContent, pC->zContentRowid
);
break;
case FTS5_STMT_INSERT_CONTENT:
case FTS5_STMT_REPLACE_CONTENT: {
int nCol = pC->nCol + 1;
char *zBind;
int i;
zBind = sqlite3_malloc64(1 + nCol*2);
if( zBind ){
for(i=0; i<nCol; i++){
zBind[i*2] = '?';
zBind[i*2 + 1] = ',';
}
zBind[i*2-1] = '\0';
zSql = sqlite3_mprintf(azStmt[eStmt], pC->zDb, pC->zName, zBind);
sqlite3_free(zBind);
}
break;
}
default:
zSql = sqlite3_mprintf(azStmt[eStmt], pC->zDb, pC->zName);
break;
}
if( zSql==0 ){
rc = SQLITE_NOMEM;
}else{
int f = SQLITE_PREPARE_PERSISTENT;
if( eStmt>FTS5_STMT_LOOKUP ) f |= SQLITE_PREPARE_NO_VTAB;
rc = sqlite3_prepare_v3(pC->db, zSql, -1, f, &p->aStmt[eStmt], 0);
sqlite3_free(zSql);
if( rc!=SQLITE_OK && pzErrMsg ){
*pzErrMsg = sqlite3_mprintf("%s", sqlite3_errmsg(pC->db));
}
}
}
*ppStmt = p->aStmt[eStmt];
sqlite3_reset(*ppStmt);
return rc;
}
/*
** Check that the contents of the FTS index match that of the %_content
** table. Return SQLITE_OK if they do, or SQLITE_CORRUPT if not. Return
** some other SQLite error code if an error occurs while attempting to
** determine this.
*/
int sqlite3Fts5StorageIntegrity(Fts5Storage *p){
Fts5Config *pConfig = p->pConfig;
int rc; /* Return code */
int *aColSize; /* Array of size pConfig->nCol */
i64 *aTotalSize; /* Array of size pConfig->nCol */
Fts5IntegrityCtx ctx;
sqlite3_stmt *pScan;
memset(&ctx, 0, sizeof(Fts5IntegrityCtx));
ctx.pConfig = p->pConfig;
aTotalSize = (i64*)sqlite3_malloc64(pConfig->nCol*(sizeof(int)+sizeof(i64)));
if( !aTotalSize ) return SQLITE_NOMEM;
aColSize = (int*)&aTotalSize[pConfig->nCol];
memset(aTotalSize, 0, sizeof(i64) * pConfig->nCol);
/* Generate the expected index checksum based on the contents of the
** %_content table. This block stores the checksum in ctx.cksum. */
rc = fts5StorageGetStmt(p, FTS5_STMT_SCAN, &pScan, 0);
if( rc==SQLITE_OK ){
int rc2;
while( SQLITE_ROW==sqlite3_step(pScan) ){
int i;
ctx.iRowid = sqlite3_column_int64(pScan, 0);
ctx.szCol = 0;
if( pConfig->bColumnsize ){
rc = sqlite3Fts5StorageDocsize(p, ctx.iRowid, aColSize);
}
if( rc==SQLITE_OK && pConfig->eDetail==FTS5_DETAIL_NONE ){
rc = sqlite3Fts5TermsetNew(&ctx.pTermset);
}
for(i=0; rc==SQLITE_OK && i<pConfig->nCol; i++){
if( pConfig->abUnindexed[i] ) continue;
ctx.iCol = i;
ctx.szCol = 0;
if( pConfig->eDetail==FTS5_DETAIL_COLUMNS ){
rc = sqlite3Fts5TermsetNew(&ctx.pTermset);
}
if( rc==SQLITE_OK ){
rc = sqlite3Fts5Tokenize(pConfig,
FTS5_TOKENIZE_DOCUMENT,
(const char*)sqlite3_column_text(pScan, i+1),
sqlite3_column_bytes(pScan, i+1),
(void*)&ctx,
fts5StorageIntegrityCallback
);
}
if( rc==SQLITE_OK && pConfig->bColumnsize && ctx.szCol!=aColSize[i] ){
rc = FTS5_CORRUPT;
}
aTotalSize[i] += ctx.szCol;
if( pConfig->eDetail==FTS5_DETAIL_COLUMNS ){
sqlite3Fts5TermsetFree(ctx.pTermset);
ctx.pTermset = 0;
}
}
sqlite3Fts5TermsetFree(ctx.pTermset);
ctx.pTermset = 0;
if( rc!=SQLITE_OK ) break;
}
rc2 = sqlite3_reset(pScan);
if( rc==SQLITE_OK ) rc = rc2;
}
/* Test that the "totals" (sometimes called "averages") record looks Ok */
if( rc==SQLITE_OK ){
int i;
rc = fts5StorageLoadTotals(p, 0);
for(i=0; rc==SQLITE_OK && i<pConfig->nCol; i++){
if( p->aTotalSize[i]!=aTotalSize[i] ) rc = FTS5_CORRUPT;
}
}
/* Check that the %_docsize and %_content tables contain the expected
** number of rows. */
if( rc==SQLITE_OK && pConfig->eContent==FTS5_CONTENT_NORMAL ){
i64 nRow = 0;
rc = fts5StorageCount(p, "content", &nRow);
if( rc==SQLITE_OK && nRow!=p->nTotalRow ) rc = FTS5_CORRUPT;
}
if( rc==SQLITE_OK && pConfig->bColumnsize ){
i64 nRow = 0;
rc = fts5StorageCount(p, "docsize", &nRow);
if( rc==SQLITE_OK && nRow!=p->nTotalRow ) rc = FTS5_CORRUPT;
}
/* Pass the expected checksum down to the FTS index module. It will
** verify, amongst other things, that it matches the checksum generated by
** inspecting the index itself. */
if( rc==SQLITE_OK ){
rc = sqlite3Fts5IndexIntegrityCheck(p->pIndex, ctx.cksum);
}
sqlite3_free(aTotalSize);
return rc;
}
/*
** Open a new Fts5Index handle. If the bCreate argument is true, create
** and initialize the underlying tables
**
** If successful, set *pp to point to the new object and return SQLITE_OK.
** Otherwise, set *pp to NULL and return an SQLite error code.
*/
int sqlite3Fts5StorageOpen(
Fts5Config *pConfig,
Fts5Index *pIndex,
int bCreate,
Fts5Storage **pp,
char **pzErr /* OUT: Error message */
){
int rc = SQLITE_OK;
Fts5Storage *p; /* New object */
sqlite3_int64 nByte; /* Bytes of space to allocate */
nByte = sizeof(Fts5Storage) /* Fts5Storage object */
+ pConfig->nCol * sizeof(i64); /* Fts5Storage.aTotalSize[] */
*pp = p = (Fts5Storage*)sqlite3_malloc64(nByte);
if( !p ) return SQLITE_NOMEM;
memset(p, 0, nByte);
p->aTotalSize = (i64*)&p[1];
p->pConfig = pConfig;
p->pIndex = pIndex;
if( bCreate ){
if( pConfig->eContent==FTS5_CONTENT_NORMAL ){
int nDefn = 32 + pConfig->nCol*10;
char *zDefn = sqlite3_malloc64(32 + (sqlite3_int64)pConfig->nCol * 10);
if( zDefn==0 ){
rc = SQLITE_NOMEM;
}else{
int i;
int iOff;
sqlite3_snprintf(nDefn, zDefn, "id INTEGER PRIMARY KEY");
iOff = (int)strlen(zDefn);
for(i=0; i<pConfig->nCol; i++){
sqlite3_snprintf(nDefn-iOff, &zDefn[iOff], ", c%d", i);
iOff += (int)strlen(&zDefn[iOff]);
}
rc = sqlite3Fts5CreateTable(pConfig, "content", zDefn, 0, pzErr);
}
sqlite3_free(zDefn);
}
if( rc==SQLITE_OK && pConfig->bColumnsize ){
rc = sqlite3Fts5CreateTable(
pConfig, "docsize", "id INTEGER PRIMARY KEY, sz BLOB", 0, pzErr
);
}
if( rc==SQLITE_OK ){
rc = sqlite3Fts5CreateTable(
pConfig, "config", "k PRIMARY KEY, v", 1, pzErr
);
}
if( rc==SQLITE_OK ){
rc = sqlite3Fts5StorageConfigValue(p, "version", 0, FTS5_CURRENT_VERSION);
}
}
if( rc ){
sqlite3Fts5StorageClose(p);
*pp = 0;
}
return rc;
}
/*
** Attempt to load an SQLite extension library contained in the file
** zFile. The entry point is zProc. zProc may be 0 in which case a
** default entry point name (sqlite3_extension_init) is used. Use
** of the default name is recommended.
**
** Return SQLITE_OK on success and SQLITE_ERROR if something goes wrong.
**
** If an error occurs and pzErrMsg is not 0, then fill *pzErrMsg with
** error message text. The calling function should free this memory
** by calling sqlite3DbFree(db, ).
*/
static int sqlite3LoadExtension(
sqlite3 *db, /* Load the extension into this database connection */
const char *zFile, /* Name of the shared library containing extension */
const char *zProc, /* Entry point. Use "sqlite3_extension_init" if 0 */
char **pzErrMsg /* Put error message here if not 0 */
){
sqlite3_vfs *pVfs = db->pVfs;
void *handle;
int (*xInit)(sqlite3*,char**,const sqlite3_api_routines*);
char *zErrmsg = 0;
const char *zEntry;
char *zAltEntry = 0;
void **aHandle;
u64 nMsg = 300 + sqlite3Strlen30(zFile);
int ii;
int rc;
/* Shared library endings to try if zFile cannot be loaded as written */
static const char *azEndings[] = {
#if SQLITE_OS_WIN
"dll"
#elif defined(__APPLE__)
"dylib"
#else
"so"
#endif
};
if( pzErrMsg ) *pzErrMsg = 0;
/* Ticket #1863. To avoid a creating security problems for older
** applications that relink against newer versions of SQLite, the
** ability to run load_extension is turned off by default. One
** must call either sqlite3_enable_load_extension(db) or
** sqlite3_db_config(db, SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, 1, 0)
** to turn on extension loading.
*/
if( (db->flags & SQLITE_LoadExtension)==0 ){
if( pzErrMsg ){
*pzErrMsg = sqlite3_mprintf("not authorized");
}
return SQLITE_ERROR;
}
zEntry = zProc ? zProc : "sqlite3_extension_init";
handle = sqlite3OsDlOpen(pVfs, zFile);
#if SQLITE_OS_UNIX || SQLITE_OS_WIN
for(ii=0; ii<ArraySize(azEndings) && handle==0; ii++){
char *zAltFile = sqlite3_mprintf("%s.%s", zFile, azEndings[ii]);
if( zAltFile==0 ) return SQLITE_NOMEM_BKPT;
handle = sqlite3OsDlOpen(pVfs, zAltFile);
sqlite3_free(zAltFile);
}
#endif
if( handle==0 ){
if( pzErrMsg ){
*pzErrMsg = zErrmsg = sqlite3_malloc64(nMsg);
if( zErrmsg ){
sqlite3_snprintf(nMsg, zErrmsg,
"unable to open shared library [%s]", zFile);
sqlite3OsDlError(pVfs, nMsg-1, zErrmsg);
}
}
return SQLITE_ERROR;
}
xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*))
sqlite3OsDlSym(pVfs, handle, zEntry);
/* If no entry point was specified and the default legacy
** entry point name "sqlite3_extension_init" was not found, then
** construct an entry point name "sqlite3_X_init" where the X is
** replaced by the lowercase value of every ASCII alphabetic
** character in the filename after the last "/" upto the first ".",
** and eliding the first three characters if they are "lib".
** Examples:
**
** /usr/local/lib/libExample5.4.3.so ==> sqlite3_example_init
** C:/lib/mathfuncs.dll ==> sqlite3_mathfuncs_init
*/
if( xInit==0 && zProc==0 ){
int iFile, iEntry, c;
int ncFile = sqlite3Strlen30(zFile);
zAltEntry = sqlite3_malloc64(ncFile+30);
if( zAltEntry==0 ){
sqlite3OsDlClose(pVfs, handle);
return SQLITE_NOMEM_BKPT;
}
memcpy(zAltEntry, "sqlite3_", 8);
for(iFile=ncFile-1; iFile>=0 && zFile[iFile]!='/'; iFile--){}
iFile++;
if( sqlite3_strnicmp(zFile+iFile, "lib", 3)==0 ) iFile += 3;
for(iEntry=8; (c = zFile[iFile])!=0 && c!='.'; iFile++){
if( sqlite3Isalpha(c) ){
zAltEntry[iEntry++] = (char)sqlite3UpperToLower[(unsigned)c];
}
}
memcpy(zAltEntry+iEntry, "_init", 6);
zEntry = zAltEntry;
xInit = (int(*)(sqlite3*,char**,const sqlite3_api_routines*))
sqlite3OsDlSym(pVfs, handle, zEntry);
}
if( xInit==0 ){
if( pzErrMsg ){
nMsg += sqlite3Strlen30(zEntry);
*pzErrMsg = zErrmsg = sqlite3_malloc64(nMsg);
if( zErrmsg ){
sqlite3_snprintf(nMsg, zErrmsg,
"no entry point [%s] in shared library [%s]", zEntry, zFile);
sqlite3OsDlError(pVfs, nMsg-1, zErrmsg);
}
}
sqlite3OsDlClose(pVfs, handle);
sqlite3_free(zAltEntry);
return SQLITE_ERROR;
}
sqlite3_free(zAltEntry);
rc = xInit(db, &zErrmsg, &sqlite3Apis);
if( rc ){
if( rc==SQLITE_OK_LOAD_PERMANENTLY ) return SQLITE_OK;
if( pzErrMsg ){
*pzErrMsg = sqlite3_mprintf("error during initialization: %s", zErrmsg);
}
sqlite3_free(zErrmsg);
sqlite3OsDlClose(pVfs, handle);
return SQLITE_ERROR;
}
/* Append the new shared library handle to the db->aExtension array. */
aHandle = sqlite3DbMallocZero(db, sizeof(handle)*(db->nExtension+1));
if( aHandle==0 ){
return SQLITE_NOMEM_BKPT;
}
if( db->nExtension>0 ){
memcpy(aHandle, db->aExtension, sizeof(handle)*db->nExtension);
}
sqlite3DbFree(db, db->aExtension);
db->aExtension = aHandle;
db->aExtension[db->nExtension++] = handle;
return SQLITE_OK;
}
/*
** This is the xOpen method used for the "multiplex" VFS.
**
** Most of the work is done by the underlying original VFS. This method
** simply links the new file into the appropriate multiplex group if it is a
** file that needs to be tracked.
*/
static int multiplexOpen(
sqlite3_vfs *pVfs, /* The multiplex VFS */
const char *zName, /* Name of file to be opened */
sqlite3_file *pConn, /* Fill in this file descriptor */
int flags, /* Flags to control the opening */
int *pOutFlags /* Flags showing results of opening */
){
int rc = SQLITE_OK; /* Result code */
multiplexConn *pMultiplexOpen; /* The new multiplex file descriptor */
multiplexGroup *pGroup = 0; /* Corresponding multiplexGroup object */
sqlite3_file *pSubOpen = 0; /* Real file descriptor */
sqlite3_vfs *pOrigVfs = gMultiplex.pOrigVfs; /* Real VFS */
int nName = 0;
int sz = 0;
char *zToFree = 0;
UNUSED_PARAMETER(pVfs);
memset(pConn, 0, pVfs->szOsFile);
assert( zName || (flags & SQLITE_OPEN_DELETEONCLOSE) );
/* We need to create a group structure and manage
** access to this group of files.
*/
multiplexEnter();
pMultiplexOpen = (multiplexConn*)pConn;
if( rc==SQLITE_OK ){
/* allocate space for group */
nName = zName ? multiplexStrlen30(zName) : 0;
sz = sizeof(multiplexGroup) /* multiplexGroup */
+ nName + 1; /* zName */
pGroup = sqlite3_malloc64( sz );
if( pGroup==0 ){
rc = SQLITE_NOMEM;
}
}
if( rc==SQLITE_OK ){
const char *zUri = (flags & SQLITE_OPEN_URI) ? zName : 0;
/* assign pointers to extra space allocated */
memset(pGroup, 0, sz);
pMultiplexOpen->pGroup = pGroup;
pGroup->bEnabled = (unsigned char)-1;
pGroup->bTruncate = (unsigned char)sqlite3_uri_boolean(zUri, "truncate",
(flags & SQLITE_OPEN_MAIN_DB)==0);
pGroup->szChunk = (int)sqlite3_uri_int64(zUri, "chunksize",
SQLITE_MULTIPLEX_CHUNK_SIZE);
pGroup->szChunk = (pGroup->szChunk+0xffff)&~0xffff;
if( zName ){
char *p = (char *)&pGroup[1];
pGroup->zName = p;
memcpy(pGroup->zName, zName, nName+1);
pGroup->nName = nName;
}
if( pGroup->bEnabled ){
/* Make sure that the chunksize is such that the pending byte does not
** falls at the end of a chunk. A region of up to 64K following
** the pending byte is never written, so if the pending byte occurs
** near the end of a chunk, that chunk will be too small. */
#ifndef SQLITE_OMIT_WSD
extern int sqlite3PendingByte;
#else
int sqlite3PendingByte = 0x40000000;
#endif
while( (sqlite3PendingByte % pGroup->szChunk)>=(pGroup->szChunk-65536) ){
pGroup->szChunk += 65536;
}
}
pGroup->flags = flags;
rc = multiplexSubFilename(pGroup, 1);
if( rc==SQLITE_OK ){
pSubOpen = multiplexSubOpen(pGroup, 0, &rc, pOutFlags, 0);
if( pSubOpen==0 && rc==SQLITE_OK ) rc = SQLITE_CANTOPEN;
}
if( rc==SQLITE_OK ){
sqlite3_int64 sz64;
rc = pSubOpen->pMethods->xFileSize(pSubOpen, &sz64);
if( rc==SQLITE_OK && zName ){
int bExists;
if( flags & SQLITE_OPEN_MASTER_JOURNAL ){
pGroup->bEnabled = 0;
}else
if( sz64==0 ){
if( flags & SQLITE_OPEN_MAIN_JOURNAL ){
/* If opening a main journal file and the first chunk is zero
** bytes in size, delete any subsequent chunks from the
** file-system. */
int iChunk = 1;
do {
rc = pOrigVfs->xAccess(pOrigVfs,
pGroup->aReal[iChunk].z, SQLITE_ACCESS_EXISTS, &bExists
);
if( rc==SQLITE_OK && bExists ){
rc = pOrigVfs->xDelete(pOrigVfs, pGroup->aReal[iChunk].z, 0);
if( rc==SQLITE_OK ){
rc = multiplexSubFilename(pGroup, ++iChunk);
}
}
}while( rc==SQLITE_OK && bExists );
}
}else{
/* If the first overflow file exists and if the size of the main file
** is different from the chunk size, that means the chunk size is set
** set incorrectly. So fix it.
**
** Or, if the first overflow file does not exist and the main file is
** larger than the chunk size, that means the chunk size is too small.
** But we have no way of determining the intended chunk size, so
** just disable the multiplexor all togethre.
*/
rc = pOrigVfs->xAccess(pOrigVfs, pGroup->aReal[1].z,
SQLITE_ACCESS_EXISTS, &bExists);
bExists = multiplexSubSize(pGroup, 1, &rc)>0;
if( rc==SQLITE_OK && bExists && sz64==(sz64&0xffff0000) && sz64>0
&& sz64!=pGroup->szChunk ){
pGroup->szChunk = (int)sz64;
}else if( rc==SQLITE_OK && !bExists && sz64>pGroup->szChunk ){
pGroup->bEnabled = 0;
}
}
}
}
if( rc==SQLITE_OK ){
if( pSubOpen->pMethods->iVersion==1 ){
pMultiplexOpen->base.pMethods = &gMultiplex.sIoMethodsV1;
}else{
pMultiplexOpen->base.pMethods = &gMultiplex.sIoMethodsV2;
}
/* place this group at the head of our list */
pGroup->pNext = gMultiplex.pGroups;
if( gMultiplex.pGroups ) gMultiplex.pGroups->pPrev = pGroup;
gMultiplex.pGroups = pGroup;
}else{
multiplexFreeComponents(pGroup);
sqlite3_free(pGroup);
}
}
multiplexLeave();
sqlite3_free(zToFree);
return rc;
}
/* Translate an sqlite3_file* that is really a multiplexGroup* into
** the sqlite3_file* for the underlying original VFS.
**
** For chunk 0, the pGroup->flags determines whether or not a new file
** is created if it does not already exist. For chunks 1 and higher, the
** file is created only if createFlag is 1.
*/
static sqlite3_file *multiplexSubOpen(
multiplexGroup *pGroup, /* The multiplexor group */
int iChunk, /* Which chunk to open. 0==original file */
int *rc, /* Result code in and out */
int *pOutFlags, /* Output flags */
int createFlag /* True to create if iChunk>0 */
){
sqlite3_file *pSubOpen = 0;
sqlite3_vfs *pOrigVfs = gMultiplex.pOrigVfs; /* Real VFS */
#ifdef SQLITE_ENABLE_8_3_NAMES
/* If JOURNAL_8_3_OFFSET is set to (say) 400, then any overflow files are
** part of a database journal are named db.401, db.402, and so on. A
** database may therefore not grow to larger than 400 chunks. Attempting
** to open chunk 401 indicates the database is full. */
if( iChunk>=SQLITE_MULTIPLEX_JOURNAL_8_3_OFFSET ){
sqlite3_log(SQLITE_FULL, "multiplexed chunk overflow: %s", pGroup->zName);
*rc = SQLITE_FULL;
return 0;
}
#endif
*rc = multiplexSubFilename(pGroup, iChunk);
if( (*rc)==SQLITE_OK && (pSubOpen = pGroup->aReal[iChunk].p)==0 ){
int flags, bExists;
flags = pGroup->flags;
if( createFlag ){
flags |= SQLITE_OPEN_CREATE;
}else if( iChunk==0 ){
/* Fall through */
}else if( pGroup->aReal[iChunk].z==0 ){
return 0;
}else{
*rc = pOrigVfs->xAccess(pOrigVfs, pGroup->aReal[iChunk].z,
SQLITE_ACCESS_EXISTS, &bExists);
if( *rc || !bExists ){
if( *rc ){
sqlite3_log(*rc, "multiplexor.xAccess failure on %s",
pGroup->aReal[iChunk].z);
}
return 0;
}
flags &= ~SQLITE_OPEN_CREATE;
}
pSubOpen = sqlite3_malloc64( pOrigVfs->szOsFile );
if( pSubOpen==0 ){
*rc = SQLITE_IOERR_NOMEM;
return 0;
}
pGroup->aReal[iChunk].p = pSubOpen;
*rc = pOrigVfs->xOpen(pOrigVfs, pGroup->aReal[iChunk].z, pSubOpen,
flags, pOutFlags);
if( (*rc)!=SQLITE_OK ){
sqlite3_log(*rc, "multiplexor.xOpen failure on %s",
pGroup->aReal[iChunk].z);
sqlite3_free(pSubOpen);
pGroup->aReal[iChunk].p = 0;
return 0;
}
}
return pSubOpen;
}
/*
** Return the serialization of a database
*/
unsigned char *sqlite3_serialize(
sqlite3 *db, /* The database connection */
const char *zSchema, /* Which database within the connection */
sqlite3_int64 *piSize, /* Write size here, if not NULL */
unsigned int mFlags /* Maybe SQLITE_SERIALIZE_NOCOPY */
){
MemFile *p;
int iDb;
Btree *pBt;
sqlite3_int64 sz;
int szPage = 0;
sqlite3_stmt *pStmt = 0;
unsigned char *pOut;
char *zSql;
int rc;
#ifdef SQLITE_ENABLE_API_ARMOR
if( !sqlite3SafetyCheckOk(db) ){
(void)SQLITE_MISUSE_BKPT;
return 0;
}
#endif
if( zSchema==0 ) zSchema = db->aDb[0].zDbSName;
p = memdbFromDbSchema(db, zSchema);
iDb = sqlite3FindDbName(db, zSchema);
if( piSize ) *piSize = -1;
if( iDb<0 ) return 0;
if( p ){
if( piSize ) *piSize = p->sz;
if( mFlags & SQLITE_SERIALIZE_NOCOPY ){
pOut = p->aData;
}else{
pOut = sqlite3_malloc64( p->sz );
if( pOut ) memcpy(pOut, p->aData, p->sz);
}
return pOut;
}
pBt = db->aDb[iDb].pBt;
if( pBt==0 ) return 0;
szPage = sqlite3BtreeGetPageSize(pBt);
zSql = sqlite3_mprintf("PRAGMA \"%w\".page_count", zSchema);
rc = zSql ? sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0) : SQLITE_NOMEM;
sqlite3_free(zSql);
if( rc ) return 0;
rc = sqlite3_step(pStmt);
if( rc!=SQLITE_ROW ){
pOut = 0;
}else{
sz = sqlite3_column_int64(pStmt, 0)*szPage;
if( piSize ) *piSize = sz;
if( mFlags & SQLITE_SERIALIZE_NOCOPY ){
pOut = 0;
}else{
pOut = sqlite3_malloc64( sz );
if( pOut ){
int nPage = sqlite3_column_int(pStmt, 0);
Pager *pPager = sqlite3BtreePager(pBt);
int pgno;
for(pgno=1; pgno<=nPage; pgno++){
DbPage *pPage = 0;
unsigned char *pTo = pOut + szPage*(sqlite3_int64)(pgno-1);
rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pPage, 0);
if( rc==SQLITE_OK ){
memcpy(pTo, sqlite3PagerGetData(pPage), szPage);
}else{
memset(pTo, 0, szPage);
}
sqlite3PagerUnref(pPage);
}
}
}
}
sqlite3_finalize(pStmt);
return pOut;
}